Ginsbourg.com - Performance and Load Test Report Template LTR 1.2

1. Performance and Load Test Report Template LTR
Tuesday, August 26, 2014 Page 1 of 29
Performance and Load Test Report Template LTR
Prepared by: Shay Ginsbourg, Consultant
Reviewed by: Dan Jones, Software QA Manager
Approved by: John Doe, Director of Software Development

2. Performance and Load Test Report Template LTR
Tuesday, August 26, 2014 Page 2 of 29
Contents
1. Scenario Specification ........................................................................................................................... 3
2. Load Test Hardware .............................................................................................................................. 4
3. Load Test Software ............................................................................................................................... 5
4. Test Data and Requirements ................................................................................................................ 6
5. Test Case Specification .......................................................................................................................... 8
6. Results ................................................................................................................................................... 9
7. Stress Testing ...................................................................................................................................... 15
8. Resource Monitoring .......................................................................................................................... 18
9. Analysis ............................................................................................................................................... 20
10. Conclusions ..................................................................................................................................... 28
11. References ...................................................................................................................................... 29

3. Performance and Load Test Report Template LTR
Tuesday, August 26, 2014 Page 3 of 29
1. Scenario Specification
Performance and load testing is normally performed in order to validate multi-client-server complex system. This load test scenario is based on …
The scenario was created in order to validate that the followings requirements have been met by the current version of the server application: …
The system topology that is relevant to the performance and load testing procedure was created …
The following pages provide the settings, results, and conclusions derived from the load tests, as specified.

4. Performance and Load Test Report Template LTR
Tuesday, August 26, 2014 Page 4 of 29
2. Load Test Hardware Load test hardware requirements depend on mainly on the footprint of the virtual client that creates load on the EXAMPLE server side. In the EXAMPLE Web APP system, the client is a Web browser that buffers thousands of EXAMPLES. That creates rather a fat client with huge memory requirements. Running an EXAMPLE load test from CMD w/o JAVA GUI: On a 64-bit LINUX EXAMPLE workstation with 8 GB RAM, 10 concurrent virtual users are below the maximum, sizing approximately 2 GB JAVA.EXE process size. With EXAMPLE JAVA GUI: On a 64-bit LINUX EXAMPLE workstation with 8 GB RAM, approximately 5 concurrent virtual users are the maximum, sizing 4.0-4.5 GB JAVA.EXE process size, depending probably on the EXAMPLE size of the specific video frames that were buffered.

5. Performance and Load Test Report Template LTR
Tuesday, August 26, 2014 Page 5 of 29
3. Load Test Software The selected load generation environment is:  Java Virtual Machine 64-bit on LINUX Ubuntu 14 64-bit,  JMeter version 2.11,  Standard and extra set of JMeter Plug-ins version 1.1.3. The Apache JMeter™ desktop application is open source software, a 100% pure Java application designed to load test functional behavior and measure performance. It was originally designed for testing Web Applications but has since expanded to other test functions. Apache JMeter™ may be used to test performance both on static and dynamic resources (files, Servlets, Perl scripts, Java Objects, Data Bases and Queries, FTP Servers and more). It can be used to simulate a heavy load on a server, network or object to test its strength or to analyze overall performance under different load types. Moreover, it can be used it to make a graphical analysis of performance or to test your server/script/object behavior under heavy concurrent load.

6. Performance and Load Test Report Template LTR
Tuesday, August 26, 2014 Page 6 of 29
4. Test Data and Requirements
param val comment
loadBalancerIP
10.150.150.50
LB
app1ServerIP
10.150.150.11
APP SERVER 1
app2ServerIP
10.150.150.12
APP SERVER 2
sqlServerIP
10.150.150.10
SQL
NVU
10 - 200
number of virtual users
RUP
1 VU/sec
rump-up period in seconds from first to last virtual user launching
SLC
1
scenario loop count (main iteration count)
Param 1
Val 1
Comment 1
Param 2
Val 2
Comment 2
Param 3
Val 3
Comment 3
Param 4
Val 4
Comment 4
Param 5
Val 5
Comment 5
Param 6
Val 6
Comment 6
…
…
NCDB
15
Number of Cases in the DB
drive
Local
Local/Net

7. Performance and Load Test Report Template LTR
Tuesday, August 26, 2014 Page 7 of 29
Viewing mode Param 1 Param 2 Param 3 Param 4 Param 5 Param 6 Param 7
Mode 1
2
3
9
4
6
4
4
Mode 2
…
Mode 3
…
EXAMPLE Off EXAMPLE Red
Type
0
1
2
Contrast
…
 Remark 1...
 Remark 2…
 Remark 3…
 Remark 4…

8. Performance and Load Test Report Template LTR
Tuesday, August 26, 2014 Page 8 of 29
5. Test Case Specification
# Test Case Number of Users EXAMPLE parameter View Mode Page rate (pps) Frame rate (fps) EXAMPLE Page size EXAMPLE Enhancement
1
1 SANITY
2
3
4
5
6
7
8
9
10

9. Performance and Load Test Report Template LTR
Tuesday, August 26, 2014 Page 9 of 29
6. Results Test case 1 - SANITY (EXAMPLE Test run duration = 7 min), EXAMPLE = Off Label # Samples Ave Med 90% Min Max %err
T1. Transaction Controller – Perform authentication
T2. Transaction Controller - EXAMPLE manager
T3. Transaction Controller - EXAMPLE
T4. Get Pages - Initial Buffering (EXAMPLE)
T5.1 Get Pages - EXAMPLE Playing (EXAMPLE)
T5.2 Get Pages - Scrolling (EXAMPLE)
T5.3 Create Thumbnail - EXAMPLE
TOTAL

10. Performance and Load Test Report Template LTR
Tuesday, August 26, 2014 Page 10 of 29
Test case 10 (EXAMPLE Test run duration = 23 min), EXAMPLE = Off Label # Samples Ave Med 90% Min Max %err
T1. Transaction Controller – Perform authentication
T2. Transaction Controller - EXAMPLE manager
T3. Transaction Controller - EXAMPLE
T4. Get Pages - Initial Buffering (EXAMPLE)
T5.1 Get Pages - EXAMPLE Playing (EXAMPLE)
T5.2 Get Pages - Scrolling (EXAMPLE)
T5.3 Create Thumbnail - EXAMPLE
TOTAL

11. Performance and Load Test Report Template LTR
Tuesday, August 26, 2014 Page 11 of 29
Test case 11 (EXAMPLE Test run duration = 18 min), EXAMPLE = Off Label # Samples Ave Med 90% Min Max %err
T1. Transaction Controller – Perform authentication
T2. Transaction Controller - EXAMPLE manager
T3. Transaction Controller - EXAMPLE
T4. Get Pages - Initial Buffering (EXAMPLE)
T5.1 Get Pages - EXAMPLE Playing (EXAMPLE)
T5.2 Get Pages - Scrolling (EXAMPLE)
T5.3 Create Thumbnail - EXAMPLE
TOTAL

12. Performance and Load Test Report Template LTR
Tuesday, August 26, 2014 Page 12 of 29
Test case 12 (EXAMPLE Test run duration = 20 min), EXAMPLE = Off Label # Samples Ave Med 90% Min Max %err
T1. Transaction Controller – Perform authentication
T2. Transaction Controller - EXAMPLE manager
T3. Transaction Controller - EXAMPLE
T4. Get Pages - Initial Buffering (EXAMPLE)
T5.1 Get Pages - EXAMPLE Playing (EXAMPLE)
T5.2 Get Pages - Scrolling (EXAMPLE)
T5.3 Create Thumbnail - EXAMPLE
TOTAL

13. Performance and Load Test Report Template LTR
Tuesday, August 26, 2014 Page 13 of 29
Test case 13 (EXAMPLE Test run duration = 29 min), EXAMPLE = Off Label # Samples Ave Med 90% Min Max %err
T1. Transaction Controller – Perform authentication
T2. Transaction Controller - EXAMPLE manager
T3. Transaction Controller - EXAMPLE
T4. Get Pages - Initial Buffering (EXAMPLE)
T5.1 Get Pages - EXAMPLE Playing (EXAMPLE)
T5.2 Get Pages - Scrolling (EXAMPLE)
T5.3 Create Thumbnail - EXAMPLE
TOTAL

14. Performance and Load Test Report Template LTR
Tuesday, August 26, 2014 Page 14 of 29
Test case 14 (EXAMPLE Test run duration = 18 min), EXAMPLE = Off Label # Samples Ave Med 90% Min Max %err
T1. Transaction Controller – Perform authentication
T2. Transaction Controller - EXAMPLE manager
T3. Transaction Controller - EXAMPLE
T4. Get Pages - Initial Buffering (EXAMPLE)
T5.1 Get Pages - EXAMPLE Playing (EXAMPLE)
T5.2 Get Pages - Scrolling (EXAMPLE)
T5.3 Create Thumbnail - EXAMPLE
TOTAL

15. Performance and Load Test Report Template LTR
Tuesday, August 26, 2014 Page 15 of 29
7. Stress Testing Test case 500 - STRESS (EXAMPLE Test run duration = 5.5 hours), EXAMPLE = Off Label # Samples Ave Med 90% Min Max %err
T1. Transaction Controller – Perform authentication
T2. Transaction Controller - EXAMPLE manager
T3. Transaction Controller - EXAMPLE
T4. Get Pages - Initial Buffering (EXAMPLE)
T5.1 Get Pages - EXAMPLE Playing (EXAMPLE)
T5.2 Get Pages - Scrolling (EXAMPLE)
T5.3 Create Thumbnail - EXAMPLE
TOTAL
Stress test monitoring on both application servers:
CPU = 90%
Disk = 0 - 500 KB/sec I/O
Memory = 35% Physical
Network = 20 Mbps I/O

16. Performance and Load Test Report Template LTR
Tuesday, August 26, 2014 Page 16 of 29
Test case 500 - STRESS (EXAMPLE Test run duration = 5.5 hours), EXAMPLE = Off

17. Performance and Load Test Report Template LTR
Tuesday, August 26, 2014 Page 17 of 29
Test case 500 - STRESS (EXAMPLE Test run duration = 5.5 hours), EXAMPLE = Off

18. Performance and Load Test Report Template LTR
Tuesday, August 26, 2014 Page 18 of 29
8. Resource Monitoring Test case 10 (EXAMPLE Test run duration = 23 min), EXAMPLE = Off

19. Performance and Load Test Report Template LTR
Tuesday, August 26, 2014 Page 19 of 29

20. Performance and Load Test Report Template LTR
Tuesday, August 26, 2014 Page 20 of 29
9. Analysis 9.1. Impact of FPS on Initial Buffering on T4: T4 Get Pages - Initial Buffering (EXAMPLE) Test cases where each user EXAMPLE, total 10 users, EXAMPLE = Off Test Case FPS Ave (sec) Med (sec) 90% (sec) Min (sec) Max (sec) %err
10
12
14
16
18
20
T4 Get Pages - Initial Buffering (EXAMPLE) Test cases where all 10 users EXAMPLE, total 10 users, EXAMPLE = Off Test Case FPS Ave (sec) Med (sec) 90% (sec) Min (sec) Max (sec) %err
11
13
15
17
19
21

21. Performance and Load Test Report Template LTR
Tuesday, August 26, 2014 Page 21 of 29
T4 Get Pages - Initial Buffering (EXAMPLE) Test cases where each user EXAMPLE, total 10 users, EXAMPLE = EXAMPLE Test Case FPS Ave (sec) Med (sec) 90% (sec) Min (sec) Max (sec) %err
110
112
114
116
118
120
T4 Get Pages - Initial Buffering (EXAMPLE) Test cases where all 10 users EXAMPLE, total 10 users, EXAMPLE = EXAMPLE Test Case FPS Ave (sec) Med (sec) 90% (sec) Min (sec) Max (sec) %err
111
113
115
117
119
121

22. Performance and Load Test Report Template LTR
Tuesday, August 26, 2014 Page 22 of 29
T4 Get Pages - Initial Buffering (EXAMPLE) Test cases where each user EXAMPLE, total 10 users, EXAMPLE = EXAMPLE Test Case FPS Ave (sec) Med (sec) 90% (sec) Min (sec) Max (sec) %err
210
212
214
216
218
220
T4 Get Pages - Initial Buffering (EXAMPLE) Test cases where all 10 users EXAMPLE, total 10 users, EXAMPLE = EXAMPLE Test Case FPS Ave (sec) Med (sec) 90% (sec) Min (sec) Max (sec) %err
211
213
215
217
219
221

23. Performance and Load Test Report Template LTR
Tuesday, August 26, 2014 Page 23 of 29
9.2. Impact of FPS on EXAMPLE Playing at T5.1: T5.1 Get Pages - EXAMPLE Playing (EXAMPLE) Test cases where each user EXAMPLE, total 10 users, EXAMPLE = Off Test Case FPS Ave (sec) Med (sec) 90% (sec) Min (sec) Max (sec) %err
10
12
14
16
18
20
T5.1 Get Pages - EXAMPLE Playing (EXAMPLE) Test cases where all 10 users EXAMPLE, total 10 users, EXAMPLE = Off Test Case FPS Ave (sec) Med (sec) 90% (sec) Min (sec) Max (sec) %err
11
13
15
17
19
21

24. Performance and Load Test Report Template LTR
Tuesday, August 26, 2014 Page 24 of 29
T5.1 Get Pages - EXAMPLE Playing (EXAMPLE) Test cases where each user EXAMPLE, total 10 users, EXAMPLE = EXAMPLE Test Case FPS Ave (sec) Med (sec) 90% (sec) Min (sec) Max (sec) %err
110
112
114
116
118
120
T5.1 Get Pages - EXAMPLE Playing (EXAMPLE) Test cases where all 10 users EXAMPLE, total 10 users, EXAMPLE = EXAMPLE Test Case FPS Ave (sec) Med (sec) 90% (sec) Min (sec) Max (sec) %err
111
113
115
117
119
121

25. Performance and Load Test Report Template LTR
Tuesday, August 26, 2014 Page 25 of 29
T5.1 Get Pages - EXAMPLE Playing (EXAMPLE) Test cases where each user EXAMPLE, total 10 users, EXAMPLE = EXAMPLE Test Case FPS Ave (sec) Med (sec) 90% (sec) Min (sec) Max (sec) %err
210
212
214
216
218
220
T5.1 Get Pages - EXAMPLE Playing (EXAMPLE) Test cases where all 10 users EXAMPLE, total 10 users, EXAMPLE = EXAMPLE Test Case FPS Ave (sec) Med (sec) 90% (sec) Min (sec) Max (sec) %err
211
213
215
217
219
221

26. Performance and Load Test Report Template LTR
Tuesday, August 26, 2014 Page 26 of 29
9.3. Impact of number of virtual users on Get Pages: T4 Get Pages - Initial Buffering (EXAMPLE) Test cases where each user EXAMPLE, fps = 10: Test Case virtual users Ave (sec) Med (sec) 90% (sec) Min (sec) Max (sec) %err
315
10
310
311
312
T5.1 Get Pages - EXAMPLE Playing (EXAMPLE) Test cases where each user EXAMPLE, fps = 10: Test Case virtual users Ave (sec) Med (sec) 90% (sec) Min (sec) Max (sec) %err
315
10
310
311
312

27. Performance and Load Test Report Template LTR
Tuesday, August 26, 2014 Page 27 of 29
9.4. Impact of EXAMPLE on Get Pages: T4 Get Pages - Initial Buffering (EXAMPLE) Test cases where each user EXAMPLE, total 10 users, fps = 10: Test Case EXAMPLE Ave (sec) Med (sec) 90% (sec) Min (sec) Max (sec) %err
10
Off
110
On
210
EXAMPLE
T5.1 Get Pages - EXAMPLE Playing (EXAMPLE) Test cases where each user EXAMPLE, total 10 users, fps = 10: Test Case EXAMPLE Ave (sec) Med (sec) 90% (sec) Min (sec) Max (sec) %err
10
Off
110
On
210
EXAMPLE

28. Performance and Load Test Report Template LTR
Tuesday, August 26, 2014 Page 28 of 29
10. Conclusions
10.1. Under the load generated by 10 virtual users, ranging from 10 to 40 FPS, the following happened … 10.2. The test duration range was approximately from 20 minutes per test case to EXAMPLE minutes. 10.3. The EXAMPLE parameter was not found to have a significant impact on the server response time inside the tested range but it did have a strong positive influence on the percentage of frames that arrived later than required (note the %err parameter on the result tables). 10.4. Test cases where all 10 users view EXAMPLE produced approximately the same results as test cases where each user views a different EXAMPLE. 10.5. The maximum response times of GET pages (EXAMPLE) operations have been found to be significantly larger than the average (and even the 90%) values of those operations. That finding suggests that the slowest 10% might suffer EXAMPLE Playing discontinuities. 10.6. The maximum server response time measured was EXAMPLE seconds (Test case 221, FPS=40, where all 10 users EXAMPLE, total 10 users, EXAMPLE = EXAMPLE).

29. Performance and Load Test Report Template LTR
Tuesday, August 26, 2014 Page 29 of 29
11. References
11.1. Software Performance and Scalability: A Quantitative Approach, Henry H. Liu, Wiley 1st edition, May 26, 2009. 11.2. The Software Verification and Validation: An Engineering and Scientific Approach, Marcus S. Fisher, Springer 2007 edition, December 20, 2006. 11.3. Performance Testing With JMeter 2.9, Bayo Erinle, Packt Publishing, July 26, 2013.