2. HARDWARE INSTALLATION
Front
Panel
1. Console Port: A DE-9 console port for inspecting settings remotely or, if needed,
resetting the device to factory default.
2. DMZ Port: The demilitarized zone (DMZ) is a physical subnet set aside for allowing
external users from the Internet to access the company’s servers. Even
though servers located in the DMZ allow external access, they still
receive security protection from the HiGuard Pro.
3. WAN 2 Port: Connects to the perimeter router.
4. WAN 1Port: Connects to the perimeter router.
5. LAN Port: Connects to the Intranet
5. SYSTEM SETTING (EASY CONFIGURATION)
Step 1.
Start
Browser
• IP: 192.168.1.1
• Account/Password:
admin/admin
Step 2.
Change
Language
• English
• Simplified Chinese
• Traditional Chinese
Step 3.
Set Internal
Network
Step 4.
Set External
Network
• WAN 1
• WAN 2
6. STEP 1. START BROWSER (IE)
1.1 Enter Remote Login URL
Open the IE browser, enter 192.168.1.1 in the address bar
7. STEP 1. START BROWSER (IE)
1. 2 Enter Login Account / Password
IE window pops up, please enter admin (user name)/admin(password) to log in.
9. STEP 2. CHANGE LANGUAGE
Administrator can set their first language operating system, currently it is available
in English / Traditional Chinese / Simplified Chinese.
10. STEP 3. SET INTERNAL NETWORK
Note: If the management interface is assigned with
a different address, the management interface will
only become accessible from a web browser using
the new IP address.
1. Click on Network > Interface > LAN
2. Enter Internal Network Related info
3. Click “Save” to complete the setup
11. STEP 4. SET EXTERNAL NETWORK
1. Click on Network > Interface > WAN
2. Enter WAN Related info
4. General setting
3. Setup WAN Alive Detection
12. STEP 4. SET EXTERNAL NETWORK
4.1.1 WAN 1 Setting [Network > Interface > WAN 1]
Input any word for recognition
Auto: Share loading on WAN automatically .
Manual: Share loading on WAN based on
administrators’ demands.
Only in “Static” mode is required.
Only in “Static” mode is required.
In Kbps, based on local ISP’s
WAN speed.
13. STEP 4. SET EXTERNAL NETWORK
4.1.2 WAN 1 Setting [Network > Interface > WAN 1]
3 connection methods
(Static/DHCP/PPPoE)
Default is 255.255.255.0. Only in
“Static” mode is required.
Input new MAC address
In Kbps, based on local ISP’s WAN speed.
14. STEP 4. SET EXTERNAL NETWORK
4.2 WAN Alive Detection
DNS/ICMP/NONE is used to check
WAN is available or not
3 modes
(PING/HTTP/HTTPS)
15. STEP 4. SET EXTERNAL NETWORK
4.3 General Setting on WAN 1
DNS Server for WAN
Default is 168.95.1.1
DNS Server for WAN
Default is 168.95.192.1
HTTP port no. Default is 80
HTTP port no. Default is 443
Time period to check
availability. Default is 3 seconds.
Web UI auto-shut down. Default is 60 minutes.