1.Insert the wall plugs 2.Unscrew the highlighted screws 3.Screw the suspended panel fixture 4. Screw the suspended cable 5.Adjust the length 6.Screw the suspended cable to the ceiling fixture. 7.Please note the recommended distances 8.Fix the LED Panel to the ceiling 9.Connect the LED Driver to AC mains power.

1. WARNING/AVERTISSEMEN
Risk of Fire. Do not install insulation within
3 inches (76 mm) of luminaire top.
Risques d’incendie. Ne pas installer d’isolation à
moins de 76 mm (3 pouces)au-dessus du luminaire.
CAUTION
Donotperforatetheintegrityoftheluminaire. Only
screwintothethreadedmountingbracketholes
locatedatthefourcornersofthefixture.
Environmental Operating Temperature Range
Environmental Rating
Environmental Storage Temperature Range
-10°C to +40°C
Dry location rated
-40°C to +60°C
Refer toTLP Series LED Panel Specification for more lamp
electronical data info.
Storage Info
www.sgslight.com | sales@sgslight.com
SUSPENDED
For TLP-X/F/M/A/E Series

2. INSTALLATION STEPS
Items
3030 3060 6060 6262 3012 6012
X 2 X 3
X 2 X 3
X 4 X 6
X 2 X 3
X 2 X 3
wire A
wire B
Unscrew the highlighted screws from the four
corners of the LED Panel.
Insert the wall plugs into the ceiling and secure
the suspended surface fixture to the ceiling.
1 2
Screw the suspended panel fixture to the LED Panel.3 Screw the suspended cable to the LED Panel.4
www.sgslight.com | sales@sgslight.com
SUSPENDED KITS
TLP-FDJ2 TLP-FDJ3

3. Adjust the length of the suspended cable to the
desired length.
5 Screw the suspended cable to the ceiling fixture.6
Distance
3030: 370mm
3060: 370mm
6060: 280mm
Distance
6262: 180mm
3012: 370mm
6012: 280mm
30120/60120
Please note the recommended distances for the ceiling fixtures.7
Fix the LED Panel to the ceiling and make final
adjustments for desired height and angle.
8 Connect the LED Driver to AC mains power.9
3030: A: 222mm
3060: 520mmA:
6060: 520mmA:
6262: A: 505mm
3012: A: 425+B: 425mm
A: 425+B: 425mm6012:
7
3012/6012
3012/6012
www.sgslight.com | sales@sgslight.com