3. Leading From The Front

4. Factory Sites
 Unit 1 : Sokhada
Next to BSNL Telephone Office
Nr. Sokhada Temple, Sokhada,
Vadodara -
 Unit 2 :
Nr. Lamdapura Bus Stop,
At & Post : Lamdapura,
Ta: Savli – 391 775
Dist: Vadodara

5. HEAD OFFICE
4/B, Pancharatna Building
Jetalpur Road, Alkapuri Road
Vadodara, Gujarat - 390 007
BRANCH OFFICE
L-22,Silver Point,
Bhatar Road, Surat.

6. Composite Fibreglass Gutter
 Composite Fiberglass Gutters are
specifically designed for the
application in Industrial Shed-
Roofing in order to drain out the
rainwater in a systematic
manner, satisfying all the
queries to the Civil Engineering.

7. Frp Gutter – Drop End & Stop
End

8. Rain Water Gutter

9. Application Of Gutter
IN INDUSTRIES AS,
• EAVES GUTTER
• VALLEY GUTTER

10. View Of Gutter
Showing the stiffeners & supports

11. Specifications Of
Composite Gutter
 We are providing 25.0 mm wide M.S. Flat stiffeners of 3.0 mm at every
interval of 1000.00 mm. Length impregnated on outer side of Gutter to get
an extra mechanical strength in total length.
 Composite Fibreglass Gutter are available in 3.0 to 5.0 Meters of length.
 Total thickness of the system will be 4.0mm and 5.0mm approximately.
 Fixing arrangement remains similar to the conventional M.S. Gutter.
 Weight of the Gutter is around 3.8 kg to 4.2 Kg. / Sq. Mtr. approximately
depending upon the thickness and length of the Gutter.

12. Main Advantages Of Composite
Fibreglass Gutter
 Composite Fibreglass Gutters are an excellent substitute for
conventional A.C. Gutters, M.S./ G.I. Gutters.
 FRP Gutters are sturdy, durable, and gives long life hassle free
performance.
 FRP Gutters are cent percent maintenance free, totally non-corrosive,
non-rusting, shatter free, leak proof, non-cracking material.

13. Other Advantages
 FRP gutters are available in customized size, Shape, Thickness, Colour
Shade .
 FRP Gutters are available in minimum thickness of 4.00mm & 5.0mm.
with Seven years Guarantee.
 Fixing/Installation job of FRP Gutter is executed entirely on turnkey
basis.
 FRP Gutters will be erected with necessary required slope to drain out
the rainwater easily.
 FRP Gutter can bear the load of 2-3 persons per Rmt. having M.S.
Suspenders support at every 500mm. to 1000mm. which will give the life
long performance.

14. Why To Spend More For Industrial Rain Water Gutter
 You have already spent 3 times by using either colour coated or
Galvalume sheet instead of asbestos or normal G.I. corrugated sheets
 Total cost of Gutter system in Industrial roofing sheet cost is normally
15 to 25%, depends on size and quantity of Gutter.
 Any metallic Gutter is corrosive which require regular maintenance
after one or two years.

15.  Gutter corrosion spreading faster than roofing sheet due to collection of
wastage. Corrosion in Metallic Gutter is due to collection and settlement
of dust and leaving in wet condition specially in monsoon.
 Due to non corrosive property of FRP and smooth finish, 90% of the dust
or other particles do not exist in Gutter but it drown with water.
Why To Spend More For Industrial Rain Water
Gutter

16. Customer List
CUSTOMER NAME PLACE
M/S. GENERAL MOTORS INDIA LTD. HALOL, GUJARAT
M/S. BRITCO FOODS LTD (COCA COLA) KHEDA, GUJARAT
O.N.G.C. LTD. VADODARA
M/S. SWIL INDIA LTD. JHAGADIA, BHARUCH
M/S. S. KUMARS LTD. MYSORE, KARNATAKA
M/S. ROYAL CUSHION VINYL PRODUCTS LTD. HALOL, GUJARAT
M/S. GE PLASTIC INDIA LTD. VADODARA
M/S. I.P.C.L. VADODARA
M/S. FAG BEARINGS INDIA LTD. VADODARA
M/S. RATMANI METALS & TUBES LTD AHMEDABAD

17. Customer List
NAME OF CUSTOMER PLACE
M/S. EUPEC – WELSPUN PIPECOATINGS
INDIA LTD
DAHEJ, BHARUCH, ANJAR
INDIAN AIR FORCE TOWNSHIP BHUJ
M/S. ALEMBIC LIMITED PANELAV, HALOL
M/S. GLOFAME COTSPIN INDUSTRIES
LIMITED
VAPI
M/S. WELSPUN TERRY TOWELS VAPI
M/S. RAJASHREE POLYFIL UMMALLA, BHARUCH
M/S. AJANTA MANUFACTURING
LIMITED
SAMIKHIYARI, BHUJ
M/S. WELSPUN INDIA LIMITED ANAJAR, BHUJ
M/s. INDIAN STEEL CORPORATION LTD. KUTCH

18. NAME OF CUSTOMER PLACE
RELIANCE INFOCOM LTD CHENNAI, BANGLORE
RELIANCE PETROLEUM LTD JAMNAGAR
RELIANCE FILAMENT LTD SEL VASSA
FOOD CORPORATION OF INDIA GODHARA, GANDHIDHAM, VALSAD,
VADODARA

19. Types Of Diff. Gutter

20. Industrial Fibreglass Reinforced Palstic (Frp) Roofing Sheet

21. First Time In India
Frp Panel Production Line With Automatic Gel Coating & Advance Chopper System

22. Roofing Sheet

23. FRP side Cladding sheet

24. Technical Details Machine Make Frp Sheet
1. Fiber Intensity Non-alkali, non-twist, non-glue fiberglass.
02 Reinforced Line Tensile reinforced lines with longitudinal uniform
distribution (It depends on consumers to choose
voluntarily whether adding)
03 Fiberglass Adopting OCV high- quality fiberglass, the content no
less than 30%.
04 Unit Weight 1800g/m² 2400g/m² 3050g/m²
05 Nominal Thickness 1.2mm 1.5mm 2.0mm
06 Heat Resistance
Limit
-60°C to +130°C
07 Light Transmittance 53-65 %
08 Anti- ultraviolet Rate 99.9% (adding more than 0.35% UV absorbent)

25. 09 Cracking Elongation Rate 1.9%
10 Thermal Expansion Coefficient 2.3×10cm/cm/°C
11 Thermal Conductivity 0.18w/m.k
12 Warranty 15 years
Physical property
01 Flexural Strength 449 N / mm2
02 Tensile Strength at break 1434 kg / cm2
03 Density 1.51 kg / cm3
04 Barcol Hardness
Technical Details Machine Make Frp Sheet

26. Frp Base Plate With Turbo Head

29. Turbo Ventilator

30. Why Ventilate ?
Due to faulty design, atmospheric & process generated heat , there is a crying need
for adequate ventilation in Industrial, Commercial & Community Application.
Wind Ventilator offers assured 24 x 7
ventilation at zero operating cost.
A slightest wind draft induces outward
airflow by centrifugal force. This results
in negative pressure inside the building.
Fresh Ambient Air from outside rushes
in to maintain equilibrium. This flow of
current creates a continuous cycle of
ventilation.

31. Air ventilator utilize wind
energy to induce air
flow by centrifugal action.
Centrifugal force created
by rotating vanes in turn
creates low pressure zone
Which draws fresh air from
outside.
Thus replacing polluted air/hot air continuously.
Minimum wind pressure will spin ventilator and even
after wind has stopped , the fly wheel effect of
ventilator will use its stored energy to rotate and to
maintain fresh air flow.
Principle :

32. Size : 24" Neck dia / 600 mm
Weight : 6.5 Kg approx
Speed : Depends on wind
Technology : Teflon Bushing ( noiseless)
Blades : 42 Nos. 0.5mm Aluminum Blades
Moc of bottom Ring : S. S 0.5mm thick
Top Cover : Stainless Steel
Centre Shaft: M.S. 19MM with powder coated
Note : Available in Aluminum, Stainless Steel, Powder Coating /
Anodizing will be on request. Different speciation turbo ventilator are
avaiable.
About Ventilator :

33. Thickness : 1.5 mm/as per requirements
Length : 1800 mm(6 feet)/as per requirements
Wide : Standard roof
Type : Single Piece
Available : All types of Profile base plates & in requested colour
About Frp Sheet :

34.  No Electricity
 No Operating Cost
 No Maintenance
 Runs On Wind Energy
 Most Economical & Ecological
 Weather & Storm Proof
 Adaptable To any Roofing
 Noise Less
Features :

35.  Industrial Sheds
 Factories
 Hospitals
 Restaurants
 Hotels
 Ware Houses
 Paint Shops
 Domestic Use
Ideally Suited For :

36. Type of
Building
Air Changes Per
Hour
Type of
Building
Air Changes Per
Hour
Assembly Hall 6-12 Chemical Plant 30-60
Auditorium 4-12 Laundry 12-30
Bakeries 12-20 Paper Mill 08-30
Boiler Room 15-60 Textile Mill 08-15
Brewery 8-30 Packing Room 08-30
Class Room 10-15 Transformer
Room
12-30
Engine Room 12-30 Paint Shop 20-30
Factories (Light) 10-20 Ware House 05-08
Factories (Heavy) 20-40 Foundry 10-30
Recommended Air Changes :

37. • 100% Natural Result Oriented Air ventilation system
• Structure of systems have been designed to withstand up to 150 km/hour wind
velocity
• Systems weight is suitable to the normal purlin design
• Natural non mechanized Air Ventilation system for the Roofing (Ridge Level)
• System is protected by bird net
• Easy Fixing and installation
• Non corrosive covering, light weight, available in various sizes and maintenance
free
• No special Fabrication & addition is require for the errection or installation
• System is having self water draining facility
Advantage

39.  M.S. Structural supports legs.
 [In interval of 1450mm appx.]
 F.R.P. MOULDED WATER drain tray
 Inbuilt Down take system.
 Bird protection G.I. Net at topside.
 Both side F.R.P. or PPGI Sheet covering
 Corner piece (F.R.P. or PPGI) at roof Bottom.
Specifications

40.  Available in 600mm, 900mm and 1000 mm throat opening.
 Height of Ridge ventilator is 1000mm appx. fixed.
 Weight will be around 32 kg per R.Mtr for SRV 600 and 38 Kg per R.Mtr.
for SRV 900
Size

41. •
Photo with application
F.R.P Ridge Ventilator

42. F.R.P Ridge Ventilator

43. Industrial Roofing Ridge Ventilator

44. Marketing Mix

45. Few Valuable Clients

49. I.S.O.
F.G.I.

50. D & B

51.  Federation of Gujarat Industries (F.G.I)
 Dun & Bradstreet (D&B)
 Builder association of India (B.A.I)
 Indian Institute of Interior Designer (IIID).
 Indian Green Building Council (IGBC)
 Indian Polyurethane Association (IPUA)
Certificate