Building Materials and construction I - AR8222

AR 8222 BUILDING MATERIALS AND CONSTRUCTION I
Compiled By Prof. Senthil Mani, MIDAS

Bamboo treatment

Bamboo preservatives

What are the characteristics of a good building stone?
Characteristics Of Good Building Stone. Appearance: For face work it
should have fine, compact texture; light-coloured stone is preferred as dark
colours are likely to fade out in due course of time.
What are the physical properties of a rock?
The following physical properties of minerals can be easily used to identify
a mineral:
• Color.
• Streak.
• Hardness.
• Cleavage or Fracture.
• Crystalline Structure.
• Diaphaneity or Amount of Transparency.
• Tenacity.
What are some common stones used in building?
Below are qualities and uses of various stone types which are commonly
used as construction materials.
• Basalt and Trap. The structure is medium to fine grained and compact. ...
• Granite. Granites are also igneous rocks. ...
• Sand stone. These are sedimentary rocks, and hence stratified. ...
• Slate. ...
• Laterite. ...

• Marble. ...
• Gneiss. ...
• Quartzite.
Which rocks are used for building?
• This topic investigates the properties and uses of the more common
rocks used for
building: granite, basalt, sandstone, slate, limestone, marble, mica an
d chalk.Granite is a beautiful and hard igneous rock capable of being
cut and polished to a high mirror finish.
Which type of rocks are used in our daily life?
• Rocks in everyday life. Rocks are uses in many important buildings.
The rock used in most buildings is either blue stone, marble, brick
(mainly made of clay) orsandstone
What are the natural stones?
• Natural Stone products are more durable than many artificial
products, often lasting for decades with very little maintenance.
... Natural Stone products include Granite, Marble, Limestone,
Travertine, Slate, Quartzite, Sandstone and Onyx.
What are the types of stone masonry?
Different kinds of stone masonry: (a) rubble masonry; (b) ashlar masonry;
(c) coursed ashlar masonry. ... is a heterogeneous material that consists of
units and joints. Units are such as bricks, blocks, ashlars, adobes,
irregular stones, and others.
What is masonry foundation?
Masonry foundation may be constructed from concrete block or
brick masonryunits. ... The masonry foundation should be able to
adequately support weight of the structure and lateral loads imposed by soil
adjacent to foundations. It should be sufficiently durable to withstand
aggressions from soil and ground water.

Rubble masonry:
1) In this category, the stones used are either undressed or roughly
dressed having wider joints. This can be further subdivided as
uncoursed, coursed, random, dry, polygonal and bint. cheapest,
roughest and poorest form of stone masonry.
What are the 3 main rock types?
The three main types, or classes, of rock are sedimentary, metamorphic,
andigneous and the differences among them have to do with how they are
formed.Sedimentary rocks are formed from particles of sand, shells,
pebbles, and otherfragments of material. Together, all these particles are
called sediment.
What is stone foundation?
A foundation is a structure that creates a strong, level base on which to
build. ... Improperly done foundations cause settlement issues, wall
cracking, bowing, water penetration and a host of other issues.
Natural stone has been used for thousands of years until as recently as
about the 1940s.
Which is stronger brick or stone?
While both materials are durable, stone is stronger than brick. But brick is
less expensive than stone. Both can withstand the elements, including
strong winds, hot sun, and sub-freezing temperatures.
WHAT IS FENESTRATION?
In architecture, fenestration refers to the openings in a building's facade,
most notably the doors and windows. Basically, they are anything that
allows for passage from outside to inside. Turns out, holes in the structure
can actually be pretty useful.
What are the properties of bamboo?
Experiments carried out on the strength properties to include tensile,
compressive, bending, stiffness, elasticity, hardness and durability of
bamboo to resist different forces or loads on structural members. Results
showed that the strength properties of bamboo are higher than most of the
soft and hard woods.

Why is bamboo so strong?
The tensile strength of plaited bamboo cables is as strong as or stronger
than a steel cable of the same size. Hemp rope loses 20% of its strength
when wet whilebamboo cables increase in strength by as much as 20%
when wet. In fact, in South America, bamboo is referred to as vegetable
steel
What is the tensile strength of bamboo?
Although, the tensile strength of steel is 2.5-3.0 times higher
than bamboo and the specific gravity 6-8 times that of bamboo; but by
counting their tensile strength/unit weight (bamboo vs steel), the tensile
strength of bamboo is 3- 4 times that of steel.
What is the characteristic of bamboo?
In general bamboo is very durable. The outer layer of the stem is quite
dense and strong. Bamboo is both flexible and elastic. As a result items
made from bamboo tend to be very resilient and resist breaking when
placed under stress.
What are the advantages of bamboo?
One of the main advantages of building with bamboo is that it is a
wonderful, natural and renewable resource, capable of rapid growth that
can avoid future deforestation of our precious tropical rainforests. In case of
Guadua bamboo, fibers are up to 1 cm long, while those of wood are
approximately 2 mm long.
Why bamboo is used for construction?
Bamboo as a building material has high compressive strength and low
weight has been one of the most used building material as support for
concrete, especially in those locations where it is found in
abundance. Bamboo as a building material isused for the construction of
scaffolding, bridges and structures, houses.
LIME
What is lime used for in construction?
Lime in Building Construction. Lime is truly a versatile material in the
construction of buildings. It can be used in the construction
of masonry systems as a component of mortar or of the masonry unit

Why do they put lime in concrete?
Hydraulic lime. Hydraulic lime sets by reaction with water called hydration.
When a stronger lime mortar is required, such as for external or structural
purposes, a pozzolan can be added, which improves its compressive
strength and helps to protect it from weathering damage
EFFECTS OF LIME MORTAR:
"Masonry cement" is basically a mixture of ordinary Portland cement
and lime. The cements (masonry, Portland, lime) are usually combined in
set proportions to give mortars of different properties. Indeed, the main
reason lime is present is to improve workability and water retentivity.
Mud
Material. Mud, cob, adobe, clay, and many other names are historically
used synonymously to mean a mixture of subsoil and water possibly with
the addition of stones, gravel, straw, lime, and/or bitumen. This material
was used a variety of ways to build walls, floors and even roofs.
What's the difference between mud and clay?
As nouns the difference between clay and mud. is that clay is a mineral
substance made up of small crystals of silica and alumina, that is ductile
when moist; the material of pre-fired ceramics while mud is a mixture of
water and soil or fine grained sediment.
Where are mud houses found in India?
In many parts of the world, including India, the roof is supported by wooden
beams and it is made of thatch or bamboo matting with mud plastered on it.
In parts of Karnataka, Maharashtra, Andhra Pradesh and Tamil Nadu, the
roofs of traditionalhouses have mud sandwiched between mud-and-timber
layers.
Adobe bricks:
Adobe bricks (mud bricks) are made of earth with a fairly high clay content
and straw. If produced manually the earth mix is cast in open moulds onto
the ground and then left to dry out. Adobe bricks are only sun-dried, not
kiln-fired. When used for construction they are laid up into a wall using an
earth mortar.

How thick are adobe walls?
A typical adobe block is 14 inches long, 10 inches thick and only 4 inches
high, and since adobe walls tend to be at least two bricks thick
What is the main purpose of foundation?
A building foundation actually performs a number of functions. The
three most important are to bear the load of the building, anchor it against
natural forces such as earthquakes, and to isolate it from ground moisture.
What is foundation and its types?
Shallow foundations (sometimes called 'spread footings') include pads
('isolated footings'), strip footings and rafts. Deep foundations include piles,
pile walls, diaphragm walls and caissons. Types of foundation.
What are traditional building materials?
Traditional (natural) building materials Structural¬can be used as:
materials – load bearing construction (wood, stone, rammed earth, straw
bales, clay bricks, etc.) ...
What are natural building materials?
The materials common to many types of natural building are clay and sand.
... Other materials commonly used in natural building are: earth (as
rammed earth or earth bag), wood (cordwood or timber frame/post-and-
beam), straw, rice-hulls, bamboo and stone.

PAINTS , VARNISHES ( finishes)
5.2.1 Functions of Paint
Paint performs following functions :
(i) It protects wood from decaying.
(ii) It prevents corrosion of metals.
(iii) It renders surface hygienically safe and clean.
(iv) It gives decorative and attractive appearance to the surface.
(v) It also protects the surface from harmful effects of atmospheric
agencies.
5.2.2 Characteristics of an Ideal Paint
An ideal paint should have the following characteristics :
(i) The paint should be cheap.
(ii) It should be easy and harmless to the user.
(iii) It should retain its original colour for a long time.
(iv) It should be able to cover maximum area of the surface with minimum
quantities.
(v) The painted surface should dry neither too slowly nor too rapidly.
(vi) When applied, the paint should form a thin uniform film on painted
surface.
(vii) The paint should form a hard and durable coat on the painted surface.
(viii) The paint should not peel off from painted surface.
(ix) It should be good fire and moisture resistant.
(x) The painted surface should not show any cracks.
(xi) The painted surface should possess attractive and decorative pleasing
appearance.
(xii) Atmospheric agencies should not be able to affect the painted surface.
5.2.3 Constituents of an Oil Paint or Oil Borne Paints
An oil paint essentially consists of the following ingredients :
(i) A base
(ii) An inert extender or filter
(iii) A vehicle or carrier
(iv) A drier
(v) A solvent or thinner
(vi) A colouring pigment

5.2.4 Types of Paints
The paints are of following types :
(i) Aluminium Paint
(ii) Anti-Corrosive paints
(iii) Asbestos paints
(iv) Bituminous paint
(v) Bronze paints
(vi) Cellulose paint
(vii) Casein paint
(viii) Cement paint
(ix) Enamel paint
(x) Emulsion paint
(xi) Graphite paint
(xii) Plastic paints
(xiii) Silicate paint
(xiv) Luminous paint
(xv) Inodorous paint
(xvi) Rubber paint
Details of each of these paints are described below :
Aluminium Paint
The paint is prepared by holding very finely ground aluminium in
suspension either in quick drying spirit varnish or slow drying oil varnish as
per the requirements of the surface to be painted. The suspension liquid is
spirit or oil, evaporates and a thin metallic film of aluminium is left on the
surface. This paint is used for painting wood work and metal surfaces. It is
widely used for painting hot water pipes, gas tanks, marine piers, oil storage
tanks, radiators, etc.
Anti-corrosive Paint
These paints are used mainly to protect the surface of metallic structural
steel work, against the negative effects of acids, corrosive chemicals fumes
etc. There are several paints which exhibit these properties. These paints
essentially consist of the linseed oil, as vehicle and red lead, zinc oxide,
iron oxide, zinc dust, zinc chromate etc. as their base. These paints are
cheap, durable and are usually black in colour.
Asbestos Paint
This paint is used for stopping leakage of metal roofs and painting gutters,
spouts, flashings etc. to prevent their rusting. The paint is also used as damp
proof coat to cover the outer face of the basement walls. This paint can
withstand the effects of acidic gases and steam.

Bituminous Paint
This paint consists of asphalt, bitumen or pitches, dissolves in any type of
oil or petroleum. The paint is always black in colour but its colour can be
modified by mixing certain pigment like red oxide etc. in it. The paint is
used mostly for painting iron-works under water. These paints deteriorate
when exposed to direct sun. It is also used for water proofing.
Bronze Paint
These paints are prepared by disbursing aluminium bronze or copper bronze
in nitro-cellulose lacquer as vehicle. They produce a very reflective type of
surface and hence very useful for being applied on radiators. These paints
are equally effective for painting interior or exterior metallic surfaces.
Cellulose Paint
This type of paint is prepared from cellulose sheets, nitro-cotton and
photographic films. This paint dries very quickly and provides a flexible,
hard and smooth surface. The paint does not harden by oxidation but by
evaporation of thinning agent. The surface of the paint can be easily washed
and cleaned. It remains unaffected by hot water, smoky or acidic
atmosphere. This paint is used for painting cars, aeroplanes etc.
Casein Paint
Casein is a product extracted from milk curd. Casein paint when mixed with
base like whiting, titanium, lithophone, etc. forms the paint which is usually
available in powder or paste form. This paint has high capacity and can be
applied on new plaster work. It is usually used on walls, ceilings wall
boards, cements block construction etc. to increase the appearance of the
surface.
Cement Paint
This paint is available in powder form. It consists of white or coloured
cement as its base and water acts as a vehicle. No oil or varnish is added to
it. This paint is available in variety of shades. It is durable and water-proof.
This paint proves to be useful for surfaces which are damp at the time of
painting and are also likely to remain damp after painting.
Enamel Paint
This paint is prepared by adding base like white lead or zinc white to a
vehicle which is a varnish. To obtain the desired colour, colouring pigments
may also be added. This paint dries slowly and forms a hard, durable,
smooth, glossy, solid thin film. Enamel paints can be used both for interior
as well as exterior painting.

Emulsion Paint
This paint consists of synthetic resin like polyvinyl acetate. It can be
applied easily. It retains its colour for a very long time. The surface of the
paint is tough and can be cleaned by washing with water. This paint has
excellent resistance against action of alkali. It dries very quickly in about
one to two hours.
Graphite Paint
It is black in colour. It is used over the surface which come in contact with
ammonia, chlorine, sulphur gases, etc. It is very much used in under ground
railways.
Plastic Paint
This paint contains a variety of plastics in suspension and is available in the
market under different trade name. It is mostly used in show rooms, display
rooms, and auditorium etc. It can be applied by spray or by brush.
Silicate Paint
It is prepared by mixing calcium and finely ground silica with resinous
materials. It forms a very hard and durable film on painted surface. It can be
directly applied on brick, concrete or plastered surface, but only after
wetting them.
Luminous Paint
This paint is prepared by mixing calcium sulphide with varnish. This paint
shines in darkness like radium dials of watches. This paint should be
applied on surface which have been rendered free from corrosion or lead
paints in particular.
Inodorous Paint
This paint consists of white lead or zinc white mixed with methylated spirit.
No turpentine is used in this paint. White lead or zinc white is ground in oil.
Shellac with same quantity of linseed oil and castor oil is dissolved in
methylated spirit and this mixture is mixed with lead or zinc white paste
prepared in linseed oil. This paint dries quickly, but is not durable.
Rubber Paint
This paint is prepared by treating rubber with chlorine gas (chlorinated
rubber) and then dissolving it in suitable solvent. This paint can be used on
new concrete and lime plastered surfaces. This paint dries quickly. It is little
affected by weather and sunlight. It is resistant against chemical actions,
water, etc.

5.2.8 Defects in Painting
The following defects may occur in painted surface :
Fading
The paint may lose some of its colour due to effects of sunrays on colouring
pigments.
Flaking
Due to poor adhesion, paint may peel off from the surface.
Grinning
If the opacity of the final coat is insufficient, the back ground of the painted
surface is clearly visible. This defect is known as grinning.
Bloom
Due to bad ventilation or defective paint, dull patches are developed on the
painted surface.
Flashing
This is opposite of bloom. In this defect, glossy patches are developed on
the painted surface. The reason of this defect may be cheap paint, weather
reaction or poor workmanship.
Blistering
This defect occurs due to trapped moisture behind the painted surface.
Running
This defect occurs when the surface to be painted is very smooth. In this
defect, small areas of the surface are left uncovered with paint.
Sagging
Thickness of painting should not be excessive. If too much thick coat of
paint is applied, the defect is known as sagging.
Wrinkling
This defect occurs in thickly painted surfaces.
Saponification
Defect of formation of soap patches on the painted surface is known as
saponification. This defect occurs due to chemical action of the alkalies.

5.2.9 Failure of Paint
When paint applied on the surface does not perform its purposes, it is called
failure of the paint. Painting is an easy job but also has its own peculiarities. The
following are the main causes of failure of paint.
Bad Workmanship
Painters are generally in habit of thinning the paint too much so that he may
save paint and labour both. This leads to bad workmanship and it is possible
that paint may be absent for portions of surface.
Wrong Choice of Paint
Choice of paint is done based upon climatic conditions, nature of surface to
be painted and so many other factors affecting the performance of the paint.
Low quality paints are cheap but their durability is very poor.
Surface Penetration
If the surface to be painted has not been prepared well to receive the paint,
it may lead to failure of the paint.
Moisture
Leakage of moisture on any painted surface accelerates the process of
separating the paint layer from the surface.
Salts and Alkalies
The movement of moisture can also transport salts from either internal
volume of masonry or new deposits. Such salts and alkalies saponify the oil
paints.
Conditions for Painting
The painting should be done when atmospheric conditions are favourable.
Dirt, dust and moisture must not get entrapped during the process of
painting.
DISTEMPERING
It is also a process of applying wash or coating like white washing or colour
washing on the surface. Finished surfaces obtained by distempering are far
superior than those obtaind by white washing or colour washing. Distempers are
available in ready made form in the market under different trade names.

5.3.3 Properties of Distempers
(i) Distempers generally shrink on drying. Hence, if the surface receiving
distemper is weak, it may lead to cracking and flaking of the
distempers.
(ii) Distempers are available in powder form and also in paste form.
Powdered distempers are known as dry distempers, whereas paste
form distempers are known as oil bound distempers. Oil bound
distempers are superior than dry distempers.
(iii) Coatings of distempers are comparatively thick and are more brittle
than other water paints.
(iv) Distemper film is generally porous in nature and it allows water
vapour to pass through it. Hence it allows new walls to dry out
without damaging the distemper film.
(v) They are less durable than oil paints.
(vi) Distempers are generally light in colour and provide a good reflective
coating.
(vii) They can be applied on cement plastered surface, lime plastered
surface, brick work, insulating boards, etc.
5.4 VARNISHES
Varnish is a solution of some resinous substance in alcohol, oil or turpentine. The
process of covering the surface with varnish is known as varnishing. Varnishing
is done only on wooden surface.
5.4.1 Functions of Varnish
Varnish performs the following functions :
(i) It brings about brilliance to the painted surface.
(ii) It protects the surface against adverse effects of the atmosphere.
(iii) It increases the durability of the paint film.
(iv) It beautifies the surface without hiding the beautiful grains of the
wood.
Varnish plays an important part in finishing wooden surfaces of doors, windows,
floors, furniture, etc.

5.4.4 Types of Varnish
The varnishes can be classified into following categories depending upon the
solvent used :
(i) Oil Varnish
(ii) Spirit Varnish
(iii) Turpentine Varnish
(iv) Water Varnish
(v) Asphalt Varnish
(vi) Spar Varnish
(vii) Flat Varnish
What is difference between distemper and emulsion paint?
Distemper is also known as cement paint. This is called so because such kind
ofpaint can be applied directly on cement walls without any other coating on them. ...
On the other hand, if you settle for emulsions, then you can have smoother finish for
your walls. This is oil based and it gives a shine to the walls.
What are the uses of paints?
Paint is used to protect all sorts of buildings and structures from the effects of waterand
sun. Wooden buildings such as houses are usually painted because a coat of paint
prevents water seeping into the wood and making it rot. The paint also helps to prevent
the wood from drying out in the hot sun.
What is difference between paint and varnish?
Technically, it is the pigment that makes the difference. Paint has pigment and
resin, in a solvent medium, while Varnish is the resin in a solvent medium.
...Varnish protects either the surface, or the color of the surface (paint) or
both.Varnishes are mostly clear coats.
What is the binder in paint?
Binder (in paint) Binder refers to substances that hold the particles of pigment
together in paint. All paints include a binder of some sort because this is what keeps
the pigment in place after the paint dries
What are the 4 components of paint?
Typically, there are four main components in a paint: pigment, binder, liquid, and
additives. Application methods depend on the particular paint, but can include
spray application, brush methods, and electrostatic spraying. A paint's pigment plays
a large role in determining color and appearance.

Stone finishes:
The different types of stone finishes include:
• Natural Cleft. Natural Cleft Unique to slate & sandstones, it has a slightly uneven
surface that is still usable for flooring. ...
• Polished. Grinding, sanding, and buffing produces a high gloss, mirror-like surface.
...
• Honed. ...
• Flamed. ...
• Sandblasted. ...
• Leather Finish. ...
• Split Face. ...
• Veneer Stone
What is honed stone?
Honed means the surface of the stone has been ground to a smooth, flat, consistent
surface. For stones with a natural shine such as granite or marble, the polish or shine is
removed leaving a matte (unpolished) surface with little to no reflection and no bumps
or ridges.

Building Materials and construction I - AR8222

Empfohlen

Empfohlen

Weitere ähnliche Inhalte

Was ist angesagt?

Was ist angesagt? (20)

Ähnlich wie Building Materials and construction I - AR8222

Ähnlich wie Building Materials and construction I - AR8222 (20)

Mehr von Ar. M. Senthil [ senthilmani ]

Mehr von Ar. M. Senthil [ senthilmani ] (20)

Kürzlich hochgeladen

Kürzlich hochgeladen (20)

Building Materials and construction I - AR8222