2. ECOSISTEMA
Los ecosistemas son sistemas complejos como el bosque, el
río o el lago, formados por una trama de elementos físicos
(el biotopo) y biológicos (la biocenosis o comunidad de
organismos)
El ecosistema constituye el conjunto de todos los organismos
vivientes y el medio físico en que estos se desarrollan. Se
consideran frágiles por el grado de contaminación y
depredación que sufren a causa de la presión humana
El Convenio sobre la Diversidad Biológica lo define como “...
un complejo dinámico de comunidades vegetales, animales y
de microorganismos y su medio no viviente que interactúan
como una unidad funcional”.
3. ENTRE LOS ECOSISTEMAS MAS FRÁGILES DEL
ECUADOR ENCONTRAMOS:
LOS MANGLARES
LOS BOSQUES OCCIDENTALES
LOS BOSQUES ANDINOS
LOS BOSQUES ORIENTALES
4. Uno de los criterios para determinar
un ecosistema natural como frágil es el grado de
amenaza que sufren a causa de la presión
humana.
Otros ecosistemas amenazados por el impacto de
las actividades humanas son: los ecosistemas
amazónicos y los ecosistemas terrestres de
Galápagos y los ecosistemas marinos de Galápagos
La destrucción de hábitats naturales en
la costa es alarmante.
5. BOSQUES OCCIDENTALES
Uno de los sectores más afectados por la pérdida de bosques
naturales es la región del noroccidente del Ecuador. El 95%
de los bosques naturales de esta región han sido convertidos
en plantaciones agrícolas y pastizales.
La explotación, procesamiento y comercialización se realiza
entre los ríos Cayapas, Santiago y Onzole, alcanzando los 6
millones de dólares mensuales, sin tomar en cuenta el
mercado furtivo y las pedidas por el bajo nivel de
aprovechamiento (apenas se utiliza el 30% y el 70% son
desperdicios).
Los bosques secos tropicales también son afectados por
la explotación maderera, la extracción de leña y
el sobrepastoreo.
6. El 50% de los bosques de esta región se han perdido y
han sido reemplazados por plantaciones agrícolas y
pastizales, los que quedan en Esmeraldas.
Los Bosques noroccidentales: forman parte del
último reducto de bosques tropicales de la Costa del
Pacifico en América, son parte de la formación
biológica del Chocó, considerada como uno de los
“hot spot” de biodiversidad a nivel mundial, debido
a su alto endemismo.
7.
8. MANGLARES
Los manglares tienen gran
importancia ecológica y biológica, ya que estabiliza las
costas, protege las tierras interiores y es el refugio y el
hábitat de muchas especies bioacuáticas.
Los bosques de manglar han sido afectados por
la actividad agropecuaria, por la explotación maderera,
el crecimiento urbano y especialmente por la instalación
de las piscinas camaroneras
Forman barreras contra tempestades y protegen las
zonas agrícolas de la salinización.
Su destrucción se debe a la caza indiscriminada de
cangrejos, almejas, conchas y mas.
9.
10. BOSQUES ANDINOS
Los bosques andinos, entre los 2.000 y 4.000 metros de
altitud, han sido casi totalmente reemplazados por
cultivos y asentamientos humanos. Tan solo se encuentran
pequeños restos de bosque natural en lugares remotos o
poco accesibles.
En esta región se identifican varias zonas de vida; por
ejemplo, en el área del Cajas encontramos
el único reducto de bosque nublado del austro; con
una extensión de 60 a 70 hectáreas del bosque primario
el único de este sector del país, con esto se comprueba
que cada vez la deforestación en la Sierra aumenta
considerablemente entre el 2 y 3% mas que en otras
regiones
11.
12.
13. La región andina es muy importante por
su biodiversidad, debido al aislamiento de
los páramos, existe un alto endemismo en cada uno de
ellos.
En cuanto a los recursos genéticos vegetales, la región
andina constituye uno de los centros de formación de
cultivos mas importantes.
Aquí existen todavía parientes silvestres de la papa;
cereales como la quinua y amaranto:
de leguminosas de gran valor como diversos tipos
de fréjol, choclo, etc.; de tubérculos andinos como
la oca, el melloco, la jícama, la arracacha (apio) y
de frutas como el tomate de árbol y tomate riñón,
la naranjilla, el babaco, el chamburo, el chigualcán,
el taxo, etc.
14.
15. La flora comprende entre 20.000 y 25.000 especies de
plantas.
400 especies de árboles
449 especies de arbustos
92 especies de lianas
96 especies de hierbas
22 de palmas.
En los bosques montañosos existe mayor diversidad
de arbustos epífitos. Es en estos bosques donde se
encuentra la mayor biodiversidad del país, y un
altísimo endemismo, sin embargo, son los más
amenazados.
16.
17.
18.
19.
20.
21.
22.
23. BOSQUES AMAZÓNICOS
En la Amazonía, los bosques naturales se hallan amenazados
por la actividad petrolera, que provocan impactos ambientales
directos y fomenta la colonización indiscriminada.
La población de colonos ha crecido rápidamente,
especialmente en el área del río Napo, donde gran parte de la
vegetación natural ha sido convertida en plantaciones de palma
africana, pastizales y pequeñas fincas agrícolas.
La apertura de nuevas vías de acceso ha facilitado
la explotación maderera y provocado el desplazamiento de
las comunidades indígenas.
"El cultivo de la palma africana empobrece notablemente los
suelos, aunque a corto plazo resulta rentable la producción"
24.
25.
26.
27.
28.
29. GALÁPAGOS
La Biodiversidad de Galápagos tiene un patrimonio
exclusivo de 1.900 especies. Casi todas las aves y
mamíferos que viven en las islas son endémicos.
En Galápagos, la amenaza se relaciona con el
crecimiento de las áreas agrícolas, los
asentamientos urbanos, la invasión de plantas y
animales introducidos por el hombre, la
sobreexplotación de los recursos marinos y el
turismo incontrolado.
A las islas confluyen muchos de los problemas
del Ecuador Continental.
30. La colonización que a más de sobre poblar las islas y
acumular desechos, provocan la introducción de
enfermedades, plantas e insectos. Se calcula en más
de doscientos los insectos introducidos
como avispas, babosas, pulgones, 21 especies de
vertebrados foráneos, especialmente:
chivos, cerdos, gatos y ratas; y, 261 plantas
introducidas desde el continente, como la guayaba.
Otro problema es la tasa de crecimiento de la
población
31. La falta de control en el manejo del turismo es
también un hecho que atenta contra las islas.
Sobre el mar de Galápagos también existe una
serie de problemas, en especial la pesca
ilegal de los pepinos de mar y el atún.
Esta situación lleva a que 74 variedades
de flora y fauna estén amenazadas.
34. ZONAS MARINAS Y COSTERAS
Los océanos han sido, desde siempre, para los seres humanos,
una fuente infinita de sueños, enigmas y vida. Al cruzarlos se
unieron mundos y se descubrieron nuevas tierras.
Hasta hace poco tiempo se creía que sus recursos eran
inagotables y que sus aguas resistían todas las agresiones de los
humanos, sin embargo, ahora sabemos que esas zonas tan
espectaculares de nuestro planeta son vulnerables.
35. Las zonas costeras. Otro mundo al borde de los
continentes
Son franjas de transición entre el mar y el continente, se
encuentran influenciadas directamente por la acción de las
mareas. No existe una forma exacta de delimitarlas, debido a que
las características de las mismas difieren de un lugar a otro.
Zonas marinas. Azules infinitos
Son aquellas, que en los océanos, están tan lejos de los
continentes que no tienen ninguna interacción con el
36. En el Ecuador, la distribución entre las zonas
marinas y continentales, no difiere mucho de la del
resto del mundo; la superficie terrestre ecuatoriana
es de 272.045 Km2, mientras que la marina es
alrededor de 1.100.000 km2.
Inmensas playas de características diversas cubren la
franja costera continental ecuatoriana.
ZONAS COSTERAS Y MARINAS DEL ECUADOR
RIQUEZA INCALCULABLE .
37.
38.
39. Según las características de las zonas costeras
del Ecuador podemos encontrar una diversidad de
ecosistemas.
Los ecosistemas son sistemas naturales que
están formados por un conjunto de organismos
vivos y el medio físico en donde se relacionan.
Hinweis der Redaktion
Falling pictures(Intermediate)To reproduce the picture effects on this slide, do the following:On the Home tab, in the Slides group, click Layout, and then click Blank.On the Insert tab, in the Images group, click Picture. In the Insert Picture dialog box, select a picture, and then click Insert. Select the picture. Under Picture Tools, on the Format tab, in the bottom right corner of the Size group, click the Size and Position dialog box launcher. In the Format Picture dialog box, resize or crop the image so that the height is set to 2.93” and the widthis set to 4.41”. To crop the picture, click Crop in the left pane, and in the Crop pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes. Under Picture Tools, on the Format tab, in the Picture Styles group, click More, and then click Beveled Matte, White (first row, second option from the left). Under Picture Tools, on the Format tab, in the bottom right corner of the Size group, click the Size and Position dialog box launcher. In the Size and Position dialog box, on the Size tab, under Size and rotate, in the Rotation box, enter 5°.Under Picture Tools, on the Format tab, in the bottom right corner of the Picture Styles group, click the FormatPicture dialog box launcher. In the FormatPicture dialog box, click Shadow in the left pane, and then do the following in the Shadow pane:Click the button next to Presets, and then under Outer click Offset Diagonal Bottom Left (first row, third option from the left).In the Distance box, enter 20 pt. Drag the picture into the top right corner of the slide.Select the picture. On the Home tab, in the Clipboard group, click the arrow to the right of Copy, and then click Duplicate.Drag the second (duplicate) picture to the left middle of the slide.Select the second picture. Under Picture Tools, on the Format tab, in the bottom right corner of the Size group, click the Size and Position dialog box launcher. In the Format Picture dialog box, on the Size tab, under Size and rotate, in the Rotation box, enter 0°.Right-click the second picture and click Change Picture. In the Insert Picture dialog box, select a picture, and then click Insert. Select the second picture. Under Picture Tools, on the Format tab, in the bottom right corner of the Size group, click the Size and Position dialog box launcher. In the Format Picture dialog box, resize or crop the image so that the height is set to 2.93” and the widthis set to 4.41”. To crop the picture, click Crop in the left pane, and in the Crop pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes. Under Picture Tools, on the Format tab, in the bottom right corner of the Picture Styles group, click the FormatPicture dialog box launcher. In the FormatPicture dialog box, click 3-D Rotation in the left pane, and then do the following in the 3-D Rotation pane:Click the button next to Presets, and then under Perspective click Perspective Relaxed (second row, third option from the left). In the X box, enter 0°.In the Y box, enter 320°.In the Z box, enter 10°.In the Perspective box, enter 80°. On the Home tab, in the Drawing group, click Arrange, and then click Send to Back. Select the second picture. On the Home tab, in the Clipboard group, click the arrow to the right of Copy, and then click Duplicate.Drag the third picture to the bottom right corner of the slide, under the first picture.Right-click the third picture and click Change Picture. In the Insert Picture dialog box, select a picture, and then click Insert. Select the third picture. Under Picture Tools, on the Format tab, in the bottom right corner of the Size group, click the Size and Position dialog box launcher. In the Format Picture dialog box, on the Size tab, resize or crop the picture as needed so that under Size and rotate, the Height box is set to 2.93” and the Width box is set to 4.41”. Resize the picture under Size and rotate by entering values into the Height and Width boxes. Crop the picture under Crop from by entering values into the Left, Right, Top, and Bottom boxes. Under Picture Tools, on the Format tab, in the bottom right corner of the Picture Styles group, click the FormatShape dialog box launcher. In the FormatPicture dialog box, click 3-D Rotation in the left pane, and then do the following in the 3-D Rotation pane:Click the button next to Presets, and then under Perspective click Perspective Relaxed (second row, third option from the left). In the X box, enter 0°.In the Y box, enter 300°.In the Z box, enter 0°.In the Perspective box, enter 60°.On the Home tab, in the Drawing group, click Arrange, and then click Send to Back. To reproduce the background effects on this slide, do the following:Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following:In the Type list, select Linear.Click the button next to Direction, and then click Linear Down (first row, second option from the left). Under Gradient stops, click Add gradient stops or Remove gradient stops until two stops appear in the slider.Also under Gradient stops, customize the gradient stops that you added as follows:Select the first stop in the slider, and then do the following:In the Position box, enter 70%.Click the button next to Color, and then click Black, Text 1, Lighter 5% (sixth row, second option from the left). Select the second stop in the slider, and then do the following: In the Position box, enter 100%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 87, Green: 78, Blue: 51.