In part B, a student forgot to place the heated sample in the dessicator while cooling, and some water was re-absorbed by the copper (II) chloride. Will the number of waters of hydration determined be too high, too low, or remain the same? Solution The number of waters of hydration determined will be too high and the mass of the anhydrate remaining will be reported as too low. We know dessicator is used to remove water from the sample under investigation (hydrous to anhydrous) chemicals such as Anhydrous CaCl 2 , silica gel. If a student forgot to place the heated sample in the dessicator while cooling, and some water was re-absorbed by the copper (II) chloride, then the number of waters of hydration determined be too high. Hope this helped you! Thank You So Much! Please Rate this answer as you wish.(\"Thumbs Up\") .