R.O.Tack Water Technology Water Treatment sector is undergoing a rapid change on account of the entry barrier in the global market. In competitive and quality environment international level recognition has become need for every company for the longer-term growth. Every component of the quality system in the plant that meets the National and International standards has become necessity for today. Therefore every step of the project delivery from conceptualization detailed engineering to documentation have to be prepared to comply with the stringent regulatory requirements. The foundation stone of R.O. Tack Water Technology was laid in the year of 2001 in Karachi by a veteran Mr. Ayaz Attari and Mr. Azhar Frooqi is the main Director of the company who guided the company to touch the height of success. Due to the continuous efforts of the our director towards excellence R.O.Tack Water Technology has become an unrivaled manufacturer & supplier of RO Water Systems; especially Reverse Osmosis Systems. Today our Reverse Osmosis Filtration Systems are considered as the best in the market. Some of the attributes that play significant role in our uniqueness are as follows and we provide complete range of solution like packaged system turn key projects and also we offer you technical services. REVERSE OSMOSIS RO Pakistan DE-IONIZATION D.I Pakistan ULTRAFILTRATION U.F Pakistan SEA WATER DESALINATION Pakistan WASTE WATER TREATMENT Pakistan WATER SOFTENING Pakistan SAND FILTRATION Pakistan CARBON FILTRATION Pakistan PHARMA WATER Pakistan DIALYSIS WATER Pakistan BEVERAGE WATER Pakistan Design, Engineering and Supply of Mineral Water Plant and Filling Machines ISI Consultancy Setting up of Lab as per Standards Training of your Personnel Hygiene and Safety procedures Training Water Analysis Project Guidance Training for Quality Control Technical Training for Chemist and Microbiologist Operation and Maintenance After Sales Service Spares Sales Annual Maintenance Contract Turn Key Projects Complete Detail Design, Engineering, Procurement and construction provided at single finger only for complete End to End solution with high quality deliverables. Our Deliverables. 1. Detail Proposal with Costing. 2. Basic Design and Engineering Packages. 3. Complete Engineering with all related standard norms. 4. Complete procurement. 5. Construction 6. Commissioning. 7. Operation and maintenance. Tel: +92 (213) 5436228 Fax: +92 (213) 2621927 Cell: +92 (300) 2824299

2. YOUR REQUIREMENT OF DRINKING WATER PLANT.
1.0 Reverse Osmosis System 10,000 GPD with complete pre-filtration, Post filtration,
Washing
And Filling manual system
Price Rs.,9,50,000/=
Delivery 04 weeks
Installation 04 Days
Our Offer Includes:
Six months Warranty for FREE Maintenance*.
Buyer’s Responsibilities:
1. Plant room.
2. Incoming/Outgoing and drain line within battery limit.
3. Electrical line in plant room.
4. Running Chemicals.
5. Site clearance.
*Parts and chemical will be provided by the Client, if required.
2

3. SUB : YOUR REQUIREMENT OF DRINKING WATER PLANT.
Dear
This refers to your requirement of packaged drinking water plant, we have quote you for 10000
Gallons/day complete scheme Of RO System.
Please find our Best Competitive Offer for your kind reference as per discussion had with you
regarding your above requirement.
Our Best Techno-Commercial Offer is constructed as follows.
• Process of the system & Design basis.
• Scope of Supply with Technical Specification & Scope of exclusion.
• Price with Commercial terms & Conditions.
We hope that we will provide you best project with best services & expect to remember ourselves
before finalization of your most valued project.
For R.O.Tack water Technology,
Ayaz Attari M. Azhar Farooqi
Engineer Chief Executive
Manufacturing water treatment plant , produce the water containing sufficient
/required quantity of minerals which is required to human bodies.

4. Process:
Water is passed through following different stages for process of
filtration & separation in packaged drinking water plant process.
• Pressure Sand filter.
To remove suspended matter from the water. By means of Multi size Graded sand filled in the
Vessel of FRP material, which is natural process of filtration adopted by the nature.
• Activated Carbon filter.
To remove Color, Odor and Smell from the water. By means of using Activated Natural carbon.
By absorbing contaminated particles of Oil & Grease from the raw water.
To control the BOD & COD in the raw water.
• Antiscalant Dosing.
To prevent the desalting element from scale deposition.
• Micron Filtration.
To remove the micron particles from the raw water. By means of using disposable candles having
Perfect micron size of porosity for filtration.
• Osmotic pressure System ( H. P. Pump ).
To create the osmotic pressure in raw water. By using pump.
• Desalination by R.O. Membrane Element.
To desalt the raw water R.O.Tack to reduce the total dissolve salts.
By using Semi permeable Membrane filter elements, Where ion filtration process is carried
out by applying pressure in the water.
So finally we will get low total dissolve salts and High purity.
Here will Have to drain the water at one side to Wash the Membrane filter elements
continuously because of filtration process there is nothing to be polluted in the system.
• Cleaning/Flushing System.
To prevent the membranes from scaling , it is neccesory to flush the membranes with treated
water whenever stop the R.O. plant for hours.
• Remineralization System.
To Balance the natural minerals quantity in the product which is recommended from W.H.O.
and P.S.Q.C.A. for drinking water.
Storage of R.O. treated water.
To remove back pressure in R.O. Membrane elements. It is only storage of the treated Water.
• Fine Polishing Filtration.
To filter the water from 5 micron to 1 microns to achieve the crystal clear filtered mineral water.
4

5. • UV System.
To kill the bacteria from fine water.
• Ozonization.
Feeding of ozone gas for removal of bacteria from treated water. Ozone gas is not storable
So that by using ozone gas generator we are producing ozone gas R.O.Tack O3 , & is passed through
The water ,as ozone is having capacity to kill the bacteria as well as to control the further growth
In the stored & packed water. Also it is increasing the level of oxygen in the water, where water
Becoming very healthy.
• Finally healthiest, crystal clear and with required Quantity of
minerals, purified & bacteria free drinking water will be send
to packing/filling.

6. ⇒SCOPE OF SUPPLY
The scope of supply for 10000gpd. packaged drinking water project contains
Raw Water Feeding Pump 1 No.
Pressure Sand Filter 1 No.
Activated Carbon Filter 1 No.
Antiscalant Dosing Pump 1 No.
Micron cartridge filter 1 Nos.
High Pressure Pump 1 No.
Reverse Osmosis Element 2 No.
Pressure Vessel for elements 1 No
Instruments 1 set
Fine Polishing M C F system-1.0 Microns
Cleaning/Flushing system
2 Nos.
1 No.
Ultraviolet Disinfection System 1 No.
Ozone Generator 1 No.
Electric Panel 1 No.
Skid 1 No.
6

7. Source Of Water :
R.O. plant is designed based on 1000ppm TDS & 200 ppm raw water hardness.
Treated Water Quality
The approximate quality of treated water is as follows considered for design of system.
Suspended Solids : Nil
Turbidity : Nil
PH : 7.00 to 7.5
T D S : Less than 50 ppm
Total Hardness : 30 ppm as CaCo3
Bacteria Coliform : Nil
Feed Water Conditions For R.O. Systems.
Max. Temperature : 40 deg. C
Free Chlorine, Bacteria, Oil : Nil
Iron/Manganese etc. : Nil
Turbidity : Less than 1.0 NTU
Scope of Exclusion .
1. Foundation for Equipments and any Civil Works.
2. Power, Water and Electrifications.
3. Raw water storage.
4. Testing Chemicals and Facility.
⇒ Scope of Supply
The following are the technical specification for the equipments supply for packaged drinking water project.
1. Raw Water Feeding Pump.
Type : Centrifugal
Max. Flow : 1100gph
Working flow : 1000gph
Working pressure : 2.5 bar
M.O.C. : S.S.
Power : 2.0 HP.
Make : Lowara.( Refurbished )
Nos. Offered : One No.

8. 2. Pressure Sand Filter.
Type : Down Flow Graded Sand Type
Model : 16”x65”
M.O.C. : FRP.
Make of Vessel : Komatsu/ equivalent.
Pipe Line Size : 1”.
Sand with Gravels Qty. : 150 Kgs.
Valve : Top mount multiport valve.
Valve size : 1”
Max. Flow : 1100gph.
Working Flow : 1000gph.
3. Activated Carbon Filter.
Type : Down Flow Graded Carbon Type
Model : 16”x65”
M.O.C. : FRP
Make of Vessel : Komatsu/ Equivalent
Pipe Line Size : 1”.
Carbon Qty. : 25 Kgs.
Valve : Top mount multiport valve.
Valve size : 1”
Max. Flow : 1100gph.
Working Flow : 1000gph.
4. Antiscalant Dosing .
Type : Electronic.
Dosing Pump : Diaphragm type.
M.O.C. of Dosing Pump : Pvc
Capacity of Dosing : 0 to 4 LPH.
Rate Of Dosing Chemical. : 2 to 4 PPM.
Dosing Tank. : 100 ltrs. H.D.P.E.
Power. : 220 V, Single Phase.
Make. : E DOSE/Metering pump.U.S.A.
5. Micron Cartridge Filter.
Model : MCF 20/UT/PP
Size : 20” Long.
Micron Rating : 5 Micron.
Type of Candle : P.P. Wound.
Make Of Cartridge : seitz,USA./EG
Material Of Housing : s.s
Nos. of Candles : 01 No.
Max. Flow : 1100gph.
Working Flow : 1000gph.
8

9. 6. High Pressure Pump.
Type : Vertical centrifugal pump
M.O.C. : S.S.
Max. Pressure : 250psi.
Working Pressure : 200psi.
Max. Flow : 1100gph.
Working Flow : 1000gph.
Motor : 5.0HP, 3 phase
Make of pump : Lowara. ( Refurbished )
Nos. offered : 1 Nos.
7.R O Membrane Elements.
Model : BW 30-400 Element
Type : spiral wound
Material : Polyamide.
Size : 8” Dia X 40” Long
Make : Hydranoutics/DOW filmtec
Nos. Offered : 2 Nos.
8. Pressure Vessels.
M.O.C. : FRP Or
Model : Code/ SIDE/3/Revitt
Type : Horizontal Tube Type
Size : 8” X 88”
Max. Pressure : 300 psi.
Working Pressure : 200 psi.
Nos. Offered : 1 Nos.
9. Instruments .
A Pressure Gauges : 2 Nos.
Type : Analog Tube Type
Make : H. Guru/ K.I.
Range : 0 - 28, 0 - 7 Kg/cm2
B Rotameters : 2 Nos.
Type : Float
M.O.C. : Acrylic Body, SS Float.
Range ( 0 - 5000 Lph ) : 2 No
Make : ASTER
C T.D.S. meter : 1 Nos.
Type : Digital Type, Online
Range : 0 - 999 micro mho/cm

10. Make : ASTER
10. Treated water storage Tank . : 01Nos.
No. offered : One no.
Type : Vertically Cylindrical type.
MOC : pvc, Super Tuf
Holding Capacity : 1000 gal
11 Treated water transfer pump.
Type : Centrifugal.
Make of Pump : Lowara. ( Refurbished )
MOC : SS
Capacity : 01 HP
Working Flow : 15m3/hr.
Max flow : 15m3/hr.
12 Fine Polishing Filtration System.
Model : MCF/WM/PP
Size : 20” Long.
Micron Rating : 1.0 Microns.
M.O.C. of Candle : P.P. Plated
Make Of Cartridge : Seitz USA.
Material Of Housing : pvc
Nos. of Candles : 01 Nos.
Working Flow : 15 m3/hr.
14. U. V. Disinfection System.
Type : Fluorescent Tube
Max flow : 15m3/hr.
Working Flow : 15m3/hr.
Working Pressure : 1 Kg/cm2
Material : SS 316
Make of UV Tube : Sanyo Denki Japan
No of UV system offered : 1 nos.
15. OZONE GENERATOR. 03.gm/hr.
No. offered : One no.
Type : Ozone from Natural Air type.
Flow rate : 15m3/hr..
Ozone dosing : 1 PPM
Casing : C.A.
Make of ozone generator : Prozone, U.S.A.Or Equiv.
10

11. 16. Electric Panel.
Powder coated mild steel, with circuit breaker, overload, indication lamps, operating switches, Ampere & Volts
meters.
17. Skid.
Powder coated mild steel, 1” square pipe.
18. Pvc pipe & Fitting Schedule 80
Type : Food Grade
Material : pvc
Make : Hydroseal Canada
20. Bottle Washing Unit ( manual )
It contains a Stainless steel table with three step bottle washing.
Step # 1- Bottle’s outer body washing with soapy liquid.
Step # 2- Bottle’s Inner washing with pressurized water.
Pipes and fitting will be pvc hydroseal Canada.
21.Bottle Filling unit ( manual )
It contains a Stainless steel table with 02 to 05 taps pvc
hydroseal Canada.

12. TERMS AND CONDITION:
• Prices are Ex workshop korangi, Karachi.
• Forwarding, transportation, octroi & insurance shall be extra at actual at the time of
delivery.
• Necessary Tools, tackles, labor & Chemical should be provided by client.
• Raw water tank and Boring providing is the responsibility of the Client.
• Sales Taxes/ VAT & Transportation will be Extra.
• PAYMENT TERMS :
• 60% Advance along with Techno-commercial clear order.
• 30% At the time of delivery.
• 10% At the time of commissioning.
• DELIVERY :
• Within 04 weeks after receipt of your order with advance.
• . ELECTRIC CONSUMPTION
Total electric consumption is 10. kw. (III phase)
• REQUIRED SPACE FOR THE SYSTEM
Required covered area for the plant is 105X10’.
• GUARANTEE / WARRANTY :
Offering you warranty for 06 months from the date of supply of the plant.
(Warranty clause is valid for Mfg. Defect/Workmanship Defect only Our
liability is limited to repair or replace of the same.)
For, R.O.Tack Water Technology
AYAZ ATTARI AZHAR FAROOQI
( MECHANICAL ENGINEER ) ( CHIEF EXECUTIVE )
12