1. 70-270 Q & A
Piratez
431 Questions covering all exam objectives.
57 on Installation.
87 on Administration of resources.
74 on Hardware devices & drivers.
60 On System optimization.
31 On Desktop Environment.
75 On Network Protocols & services.
47 On Security.
With
How to register for an exam.
Exam Objectives.
Exam FAQs.
Exam Retaking Hints & Tips.
2. From Piratez
Thank you for your interest in this release.
This book was written using Testout study guide CDs so the content doesn’t express the idea of Piratez.
So if you find any problem don’t contact us ; but www.testout.com .
This product is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without
even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
This is freely distributable and available for use by anyone, without restrictions. With this there is no
need to worry about piracy.
We encourage you to make as many copies as you like and to give them to your friends and
colleagues. Everyone is permitted to copy and distribute verbatim copies of this document, but
changing it is not allowed. You are under no moral or legal obligation to pay anyone for this right to use
this.
Wish you all the best for your 70-270 exam !
-Piratez
3. Exam FAQs
Exam FAQs
Click the questions for information about registering for an exam, taking the exam, and much more.
Where do I take an exam?
What do I take with me to the exam?
What specific information do I need to know to pass the exam?
What's an adaptive test?
How does the exam work?
What types of questions will I be asked?
How many questions are on an exam, and how long do I have to complete it?
How soon after I take the exam will I know whether I've passed it?
I didn't pass the exam. What do I do now? Can I retake the exam?
Where Do I Take an Exam?
When you contact Prometric or Pearson VUE, ask the customer service representative for a list of locations near you. You
can also find testing locations on the Web at http://www.prometric.com for Prometric, or at http://www.vue.com/ for Pearson
VUE.
Back to top
What Do I Take With Me to the Exam?
You will need two forms of identification, one with a picture. For example, you could use a driver's license and a credit card.
Be sure to arrive on time. Prometric recommends that you come 20 minutes early. You will be given a pen and scratch paper
to use during the exam. Notes or other reference materials are not allowed inside the testing center.
Back to top
What Specific Information Do I Need to Know to Pass the Exam?
People often ask, "What's on the exam?" This course and its posttest help you understand the concepts and tasks
necessary to do your job. However, we highly recommend that you use the TestOut Exam Simulation in order to prepare for
the certification exam.
While it does not include the exact questions, our TestOut Exam Simulation software can give you a good idea of the types
of questions you will see on each certification exam. The test objectives for an exam are listed on the Report screen of the
TestOut Exam Simulation software. These objectives outline the skills being measured by an exam. You must understand
the material relating to each objective. The TestOut Exam Simulation software is designed to test your knowledge in these
areas, and to focus your studies for the exam.
Back to top
What's an Adaptive Test?
Some exams you might take will be in an adaptive format. An adaptive test begins by giving you an easy-to-moderate
question. If you answer the question correctly, it gives you a more difficult question. With each correct answer, the difficulty
of the questions increases. On the other hand, if you answer the second question incorrectly, the next questions will be
easier. The test changes the question difficulty until it determines your skill level.
There are two primary characteristics you will notice as you take an adaptive exam.
You cannot skip questions or review previously answered questions. This means you need to take a little more time to
answer each question carefully before going on to the next question. (Adaptive exams display a warning screen at the
beginning of the exam stating that you will not be allowed to review previous questions.)
The tests are typically shorter than the traditional exams. (The current adaptive exams range between 15 and 35
questions.)
The TestOut Exam Simulation is not an adaptive test. However, because the content of the objectives for an exam are more
comprehensive than any single adaptive test, the Exam Simulation is still the best way to prepare for taking the certification
exam. Adaptive tests are too short to give you a thorough review and the chance to practice taking the test. You need to
understand all of the questions before you take the actual test.
4. Exam FAQs
Back to top
How Does the Exam Work?
Certification exams are all computer based. After entering your testing ID and selecting the test you want to take, you will
have the chance to view a tutorial on the exam software. Time spent reviewing the tutorial does not count towards the time
you have to take the exam.
After starting an adaptive exam, you cannot go back to exam questions that you skipped, so answer each question. Some
tests may be available in both adaptive and traditional versions.
Back to top
What Types of Questions Will I Be Asked?
Exam question types depend on the organization that publishes the exam. Common exam question types include the
following:
Multiple-choice, single-select (one correct answer)
Multiple-choice, multiple-select (several correct answers)
Fill-in-the-blank
Case-study questions (read a case study and answer questions)
Hot-spot question (click the correct place on a graphic)
Simulation (perform the task)
Select-and-place question (drag elements to place them)
Case-study questions present a detailed case study, then ask you to design, configure, or answer questions based on that
information. They include a tree view, as well as questions that ask you to select and connect elements, or place elements in
the correct order.
Hot-spot questions require you to examine one or more graphics or exhibits and click the graphic to indicate your response.
The majority of questions will be multiple-choice questions. If more than one answer is required for a single question, you will
be told either to select a number of answers or to select all that apply. Occasionally, you will be asked to click a specific area
of a graphic to indicate your answer.
A scenario question presents a scenario problem, requirements, and a solution, then asks you to determine and indicate
which requirements the solution fulfills.
Simulation questions require you to perform actual configuration tasks in a simulated interface. Be sure to stop and restart
IIS services when you configure them.
Select-and-place questions ask you to drag elements to their appropriate places on a graphic or table.
Our TestOut Exam Simulation software is designed to give you a feel for the actual exam interface.
Back to top
How Many Questions Are on an Exam and How Long Do I Have to Complete It?
The number of questions on the exam and the time limit depend on which test you are taking, and which format it is in. For
up to date information, check the vendor Web site for the exam you want to take.
A traditional, nonadaptive certification exam contains about 50-65 questions and allows you 90 minutes to complete
the exam.
A short-form traditional certification exam contains about 30 questions, and allows you 60 minutes to complete the
exam.
An adaptive exam contains between 15-35 questions, and has varying time limits.
A case study exam contains about four case studies with about 10 questions each. You usually have between three
and four hours to complete the exam.
Back to top
5. Exam FAQs
How Soon After I Take the Exam Will I Know Whether I've Passed It?
As soon as you have answered all of the questions, select Finish Test to end the test. The testing program provides
immediate feedback (it just feels like a thousand years) and automatically prints a report showing the required passing score
and your score on the exam. Before leaving the testing center, be sure to pick up your exam report and have it validated by
a Prometric or Pearson VUE representative. You should keep this report in case there are any discrepancies in your
certification program.
Back to top
I Didn't Pass the Exam. What Do I Do Now? Can I Retake the Exam?
If you do not pass an exam the first time you take it, you may retake it at any time. Individual certifications might have
varying rules about how quickly you can retake the exam. You need to pay for each exam that you take or retake.
Back to top
6. How to Register for an Exam
How Do I Register for an Exam?
Exams are scheduled through Prometric and Pearson VUE. The number you call depends on the vendor that offers the
exam (i.e. Microsoft, Novell, CompTIA, or Cisco). To register for a certification exam, call the number in the table that
corresponds to the certification you want to receive.
Certification Provider Phone Number
Microsoft Prometric (800) 755-3926
Pearson VUE (800) 837-8734
CompTIA A+ Prometric (800) 77-MICRO (64276)
Pearson VUE (877) 551-PLUS (7587)
CompTIA Network+ Prometric (888) 895-6116
Pearson VUE (877) 551-PLUS (7587)
CompTIA Security+ Prometric (800) 977-EXAM (3926)
Pearson VUE (877) 551-PLUS (7587)
Novell Prometric (800) RED-EXAM (733-3926)
Pearson VUE (800) TEST-CNE (837-8263)
Cisco Prometric (800) 204-EXAM (3926)
Pearson VUE (877) 404-EXAM (3926)
Inform the customer service representative that you need to register for an exam, and then supply the exam name and/or
number. The customer service representative will ask you for the following information when you register:
ID number (This is usually your Social Security Number.)
Mailing address and telephone number
E-mail address
Organization or company name
Method of payment (credit card number or check). Payment must be made in advance. Exams are $125 per exam at
the time of this writing. Certification exam prices are subject to change. Please contact your local testing center for
exact pricing.
Other important registration and cancellation information:
At the testing center, you must accept the terms of a non-disclosure agreement before you take your certification
exam. You must also complete a brief demographic survey.
You can schedule exams up to six weeks in advance or just one working day before the exam date. Be aware that the
testing centers may be busy, so it is best to call for scheduling a few days before you want to take an exam. Same-
day registration may be possible in some locations, if space is available. You must register at least 30 minutes before
test time.
You can cancel or reschedule your exam, but you must contact the testing vendor at least one working day before the
exam.
If you cancel, the exam must be taken within one year of payment. You may receive a full refund at any time after
registration and before taking an exam. No refunds are given after you have taken an exam.
7. Hacked by Piratez 70-270
Exam-taking Hints and Tips
Follow these hints to make your exam experience less stressful and more successful.
Before the Exam
Print out the review module included in the course materials, or prepare a short review sheet for the exam. It should
contain reference tables and information that you have trouble remembering. Shortly before you start the exam, study
your notes for a last-minute review. Your notes should include specific details, such as subnet charts for TCP/IP or
predefined groups in Windows 2000. You can also print out the text from the review module of this course for a longer
summary of the items covered on the exam.
Arrive 10 to 15 minutes early, and relax for a few minutes before the exam. Take a deep breath. Look at the review
sheet one last time. You will make fewer mistakes if you are not tense and rushed.
Before the actual exam begins, you will have the option to take an orientation exam to familiarize yourself with the
actual exam program. Take the orientation before you take your first exam. The time you spend on the orientation
exam does not count toward the actual test time. If you have any questions, ask the exam administrator before the
exam begins. The exams are timed, so don't use any of your test time asking questions that you could have asked
earlier.
During the Exam
When answering a question you are not sure of, eliminate the obviously incorrect answers first. Eliminating the
obvious makes it easier for you to try to select the correct answer, and increases your chances of selecting the
correct answer if you have to guess.
If you simply don't know, guess! Be sure you answer all the questions before you finish. Unanswered questions are
wrong and scored as incorrect answers. If you are unsure of an answer, make an educated guess. There is no extra
penalty for incorrect answers.
If you have time, review your answers before going on to the next question. A word of caution: be absolutely sure
before you change an answer! If you are positive that your answer is wrong, change it. But if you are not sure and
cannot explain to yourself why you need to change an answer, leave it. Most of the time, your first instinct is correct.
Note: Remember, with an adaptive test, you cannot skip questions or go back to review previous questions. This means you
will need to take the time to thoroughly read and understand each question. However, adaptive tests are also shorter, so you
do not have to worry as much about running out of time.
Use Your Scratch Paper
You will be given scratch paper and a pen to use during the exam. Some testing centers provide paper and a pencil.
Some provide laminated paper and an erasable marker.
Right after you start the exam, write down anything that could be a useful reference during the exam. This is the time
to remember what you studied on your review sheet. The information on the review sheet should be fresh in your
mind because you just did a quick review. Write lists, reference tables, and any other vital information on the paper.
(Don't spend a lot of time here--just a minute or two writing down reference material.) The list of information will save
you time as you answer the questions.
Use the paper to draw out permissions, domain diagrams, subnet masks, and so forth. A question may be easier to
answer after you see a diagram.
Case Studies
Case studies are more complex than scenario questions. With case studies, you are given a large case study and about 10
questions to answer regarding the case study. You can refer to the case study while answering questions. To help
familiarize you with this type of question, applicable TestOut exams contain questions that follow this format. Here are some
other tips to keep in mind.
Create an optimal test-taking environment. Flickering monitors, noise, and interruptions can cause you to lose
concentration. Explain the nature of the test to the testing personnel and ask to be placed in the best seat possible.
Be sure to use the restroom and eat before the exam. Case study exams may take nearly four hours.
Pace yourself. Although there are only forty questions, you will probably need the entire testing time to consult the
scenarios and decide your answers.
Understand the way the question count works. On a 40 question exam, the question count says Question 1 of 48 and
so forth. Understand that each Instructions and Case screen counts in the question total.
Look first for exhibits. Before wasting time trying to diagram what a case is trying to describe, look for an exhibit.
There is not always an exhibit, but if there is one, you can save a lot of time.
8. Hacked by Piratez 70-270
Be conservative on your note taking. You could take a lot of unnecessary notes and waste a lot of time while reading
a scenario. It might be better to read the scenario through, get oriented regarding where certain types of information is
located, and consult the specific parts of the scenario and take more detailed notes as required to answer specific
questions. That said, you should still ask for extra paper and pencils because you may need to take many notes.
Consider the pros and cons of reading the questions first. Reading the questions first can give you an idea of what to
look for as you read the scenarios. However, depending on the computer being used, it might take up to 6 seconds
per click just to move from one question to another. Clicking Next, then Back, then Next through every question can
take a fair amount of time. Also, it might be a better strategy to get an overview of the scenario. Then consult specific
parts of the scenario in more detail as you read and answer each question.
Consider the pros and cons of using the All tab. The All tab lists the content of all the other tabs and radio buttons in a
single scrollable document. While it might be convenient to read everything in one place, it also might be harder to
orient yourself to the structure of the scenario and relocate information when you need it. Consider becoming familiar
with the other tabs and radio buttons so you can more quickly find information you are looking for (and decrease the
use of the scroll bar).
Don't worry if the scenario lacks all the details, and in fact be grateful for it. For example, if a scenario mentions that
an organization has 20 buildings but only mentions subnet IDs for three of them, it is just that much useless
information you need to wade through to come up with an answer for a question. In fact, it may indicate a clue
regarding what to focus on.
Be tolerant with ambiguity. Sometimes its hard to figure out what Microsoft is talking about. Try to tolerate the
ambiguity and give it your best guess rather than spending a lot of time trying to reason through what does not seem
reasonable. That said, if there is something you need to reason through, spend the time to get it right.
Exam Retakes
If you do not pass the exam, use the score report on your transcript to identify areas needing further study.
As soon as possible, think carefully about the exam and make notes about the questions that you couldn't answer.
Look up the correct answers in your study materials. You may get the same or similar questions the next time.
Don't wait too long to retake the exam. You already know much of the material, and you may forget what you know if
you wait too long.
9. Hacked by Piratez 70-270
Exam Objectives
Exam 70-270 Installing, Configuring, and Administering Microsoft® Windows® XP Professional
This certification exam measures your ability to implement, administer, and troubleshoot information systems that
incorporate Microsoft Windows XP Professional. Before taking the exam, you should be proficient in the job skills listed
below.
# Exam Objective Module-
Section
100 Installing Windows XP Professional
101 Perform and troubleshoot an attended installation of Windows XP Professional. 10-1
10-2
102 Perform and troubleshoot an unattended installation of Windows XP Professional. 10-2
Install Windows XP Professional by using Remote Installation Services (RIS).
Install Windows XP Professional by using the System Preparation Tool.
Create unattended answer files by using Setup Manager to automate the installation of
Windows XP Professional.
103 Upgrade from a previous version of Windows to Windows XP Professional. 10-1
10-2
Prepare a computer to meet upgrade requirements.
Migrate existing user environments to a new installation.
104 Perform post-installation updates and product activation. 10-1
105 Troubleshoot failed installations. 10-2
200 Implementing and Conducting Administration of Resources
201 Monitor, manage, and troubleshoot access to files and folders. 4-3
5-1
Configure, manage, and troubleshoot file compression. 5-2
Control access to files and folders by using permissions. 5-3
Optimize access to files and folders.
202 Manage and troubleshoot access to shared folders. 5-3
5-5
Create and remove shared folders. 7-1
Control access to shared folders by using permissions.
Manage and troubleshoot Web server resources.
203 Connect to local and network print devices. 6-1
6-2
Manage printers and print jobs. 6-3
Control access to printers by using permissions. 6-4
Connect to an Internet printer.
Connect to a local print device.
204 Configure and manage file systems. 4-1
Convert from one file system to another file system.
Configure NTFS, FAT32, or FAT file systems.
205 Manage and troubleshoot access to and synchronization of offline files. 5-4
300 Implementing, Managing, Monitoring, and Troubleshooting Hardware Devices and Drivers
301 Implement, manage, and troubleshoot disk devices. 2-1
4-2
Install, configure, and manage DVD and CD-ROM devices. 4-3
Monitor and configure disks. 8-3
Monitor, configure, and troubleshoot volumes.
Monitor and configure removable media, such as tape devices.
302 Implement, manage, and troubleshoot display devices. 2-3
Configure multiple-display support.
Install, configure, and troubleshoot a video adapter.
10. Hacked by Piratez 70-270
303 Configure Advanced Configuration Power Interface (ACPI). 2-3
304 Implement, manage, and troubleshoot input and output (I/O) devices. 2-1
Monitor, configure, and troubleshoot I/O devices, such as printers, scanners, multimedia
devices, mouse, keyboard, and smart card reader.
Monitor, configure, and troubleshoot multimedia hardware, such as cameras.
Install, configure, and manage Infrared Data Association (IrDA) devices.
Install, configure, and manage wireless devices.
Install, configure, and manage USB devices.
Install, configure, and manage hand held devices.
Install, configure, and manage network adapters.
Install, configure, and manage modems.
305 Manage and troubleshoot drivers and driver signing. 2-2
306 Monitor and configure multiprocessor computers. 2-3
400 Monitoring and Optimizing System Performance and Reliability
401 Monitor, optimize, and troubleshoot performance of the Windows XP Professional desktop. 8-1
8-2
Optimize and troubleshoot memory performance.
Optimize and troubleshoot processor utilization.
Optimize and troubleshoot disk performance.
Optimize and troubleshoot application performance.
Configure, manage, and troubleshoot Scheduled Tasks.
402 Manage, monitor, and optimize system performance for mobile users. 2-4
8-2
403 Restore and back up the operating system, System State data, and user data. 8-3
Recover System State data and user data by using Windows Backup.
Troubleshoot system restoration by starting in safe mode.
Recover System State data and user data by using the Recovery Console.
500 Configuring and Troubleshooting the Desktop Environment
501 Configure and manage user profiles and desktop settings. 0-1
1-1
1-2
1-4
502 Configure support for multiple languages or multiple locations. 1-1
Enable multiple-language support.
Configure multiple-language support for users.
Configure local settings.
Configure Windows XP Professional for multiple locations.
503 Manage applications by using Windows Installer packages. 8-1
600 Implementing, Managing, and Troubleshooting Network Protocols and Services
601 Configure and troubleshoot the TCP/IP protocol. 3-2
3-3
602 Connect to computers by using dial-up networking. 3-1
3-4
Connect to computers by using a virtual private network (VPN) connection. 3-5
Create a dial-up connection to connect to a remote access server. 3-6
Connect to the Internet by using dial-up networking.
Configure and troubleshoot Internet Connection Sharing (ICS).
603 Connect to resources by using Internet Explorer. 3-5
7-1
604 Configure, manage, and implement Internet Information Services (IIS). 5-5
605 Configure, manage, and troubleshoot Remote Desktop and Remote Assistance. 3-7
606 Configure, manage, and troubleshoot an Internet Connection Firewall (ICF). 3-6
700 Configuring, Managing, and Troubleshooting Security
701 Configure, manage, and troubleshoot Encrypting File System (EFS). 5-1
702 Configure, manage, and troubleshoot security configuration and local security policy. 1-5
11. Hacked by Piratez 70-270
9-1
703 Configure, manage, and troubleshoot local user and group accounts. 1-2
1-3
Configure, manage, and troubleshoot auditing. 1-5
Configure, manage, and troubleshoot account settings. 9-1
Configure, manage, and troubleshoot account policy. 9-2
Configure, manage, and troubleshoot user and group rights. 9-3
Troubleshoot cache credentials.
704 Configure, manage, and troubleshoot Internet Explorer security settings. 9-4
13. Hacked by Piratez 70-270
You are the desktop administrator for your company. You are getting ready to install Windows XP Professional on
a new computer.
You previously copied the Windows XP source files to a folder on Server1 and shared the folder using XPPro as a
share name. You boot the computer with a Windows 98 boot floppy.
You want to begin the Windows XP installation program. What should you do?
j
k
l
m
n Run //Server1/XPPro/Setup.exe.
j
k
l
m
n Run //Server1/XPPro/Winnt32.exe.
j
k
l
m
n Run //Server1/XPPro/Setup32.exe.
i
j
k
l
m
n Run //Server1/XPPro/Winnt.exe.
Explanation:
To start a Windows XP installation, run either Winnt.exe or Winnt32.exe. If you are booted to a 32-bit Windows environment
such as Windows 95, 98, ME, NT 4 (or NT 3.5), 2000, or XP, run Winnt32.exe. If you are booted to a 16-bit environment,
such as MS-DOS or Windows 3.x, run Winnt.exe.
Note: Booting with a Windows 95/98 boot floppy boots you to a 16-bit, command-line DOS environment. You need to use
Winnt.exe to start the installation.
Objective(s):
101. Perform and troubleshoot an attended installation of Windows XP Professional.
Reference(s):
TestOut for Windows XP Administration, Section 10.2
[101 #186]
You are the desktop administrator for your company. You are preparing to install Windows XP Professional on a
computer. The computer is a 266 MHz computer with a single 6 GB drive with three partitions. Both the D: and the
E: drives have 1.5 GB of free space.
You consult the Windows XP HCL and discover that the computer's CD-ROM drive is not supported under
Windows XP. The computer is currently running Windows 95, which supports the CD-ROM drive.
You want to install Windows XP on this computer from the source files on the Windows XP installation CD. What
should you do?
i
j
k
l
m
n Boot the computer to Windows 95 and run Winnt32 /makelocalsource.
Boot to Windows 95 and copy all the files to the hard drive. Then run Winnt32 /m:folder_name, where
j
k
l
m
n folder_name is the location of the installation files.
j
k
l
m
n Boot to Windows 95 and copy all the files to the hard drive. Then run Winnt.
j
k
l
m
n Boot the computer with a Windows 95 boot disk and run Winnt /b.
Explanation:
Winnt32 uses switches to control the installation process. The /makelocalsource switch makes Setup copy the installation
files to the local hard drive. Thus, the installation is run off the local hard drive, and you don't need access to the
14. Hacked by Piratez 70-270
unsupported CD-ROM drive.
Objective(s):
101. Perform and troubleshoot an attended installation of Windows XP Professional.
Reference(s):
TestOut for Windows XP Administration, Section 10.1
[101 #194]
You are the network administrator for your company. To simplify administration, you have created a shared folder
that holds the Windows XP Professional installation files. Administrators use this folder to install new workstations.
You receive a new service pack, and you want to modify the installation folder to include the service pack. What
should you do?
Create a new share for the service pack. Instruct administrators to install Windows XP as usual, then run
j
k
l
m
n Update.exe to apply the service pack.
j
k
l
m
n From the service pack, copy Layout.inf, Dosnet.inf and Txtsetup.sif to each distribution share.
i
j
k
l
m
n Run the Update.exe -s command in the service pack, specifying the path to the network share.
Run Package.exe from the service pack to create new installation files. Replace all files in the share with
j
k
l
m
n those generated by this utility.
j
k
l
m
n From the service pack, copy Driver.cab, Layout.inf, Dosnet.inf and Txtsetup.sif to the distribution share.
Copy all files in the service pack to the network share. Run Update.exe to install both Windows XP and the
j
k
l
m
n service pack at the same time.
Explanation:
To apply a new service pack to a distribution folder, use the Update.exe -s:[distribution_folder] switch. This applies the
service pack changes to the installation files in the folder, updating all files to the latest files. Administrators can then install
Windows XP as usual to get the latest copy.
Objective(s):
101. Perform and troubleshoot an attended installation of Windows XP Professional.
Reference(s):
TestOut for Windows XP Administration, Section 10.2
[101 #202]
You are the desktop administrator for your company. You are installing Windows XP Professional on a Pentium II
computer. The computer has two hard drives, each of which contains a single 8 GB FAT32 partition. Windows 98
is installed on the first drive.
You want to use both Windows 98 and Windows XP. You also want the existing directories and data to remain on
the first drive.
What should you do to minimize the amount of effort while achieving the desired results?
15. Hacked by Piratez 70-270
Back up the data on the first drive. Reformat the partition on the first drive with NTFS. Install Windows XP
j
k
l
m
n and restore the data and directories.
i
j
k
l
m
n Install a new Windows XP installation on the second drive.
j
k
l
m
n Install a Windows XP upgrade installation on the first drive.
j
k
l
m
n Delete the partition on the first drive. Then create a new partition and install Windows XP.
Explanation:
For this scenario, install Windows XP on the second drive. The installation program will not remove the existing data
directories and files on the first drive, and you will be able to boot to both Windows 98 and Windows XP.
If you upgrade from Windows 98 to Windows XP, Windows 98 will no longer exist. Deleting the existing partition without
backing up the data would result in a data loss. Backing up the data, reformatting the partition, and installing Windows XP
would also remove Windows 98.
Objective(s):
101. Perform and troubleshoot an attended installation of Windows XP Professional.
Reference(s):
TestOut for Windows XP Administration, Section 10.1
[101 #212]
You are the desktop administrator for your company. Your company has recently decided to upgrade ten Windows
2000 Professional computers to Windows XP Professional.
You create a network share called XPpro on Server1 with the Windows XP installation files. You want to make
sure that the most recent device drivers are used during the installation. You download the dynamic update file
and extract it to the Updates share on Server1.
You want to install Windows XP from the network and use the most updated drivers from the network share. What
should you do? (Choose two. Each correct choice is part of the correct solution.)
c
d
e
f
g Run //Server1/Updates/Update.exe -s://Server1/XPpro.
c
d
e
f
g Run //Server1/XPpro/winnt /duprepare://Server1/XPpro.
c
d
e
f
g Run //Server1/XPpro/winnt32.exe.
b
c
d
e
f
g Run //Server1/XPpro/winnt32 /duprepare://Server1/Updates.
c
d
e
f
g Run //Server1/XPpro/winnt32 /dushare://Server1/Updates -s://Server1/XPpro.
c
d
e
f
g Run //Server1/XPpro/winnt.exe.
b
c
d
e
f
g Run //Server1/XPpro/winnt32 /dushare://Server1/Updates.
Explanation:
Use the /duprepare and /dushare switches with the Winnt32 command to perform an installation of Windows XP
Professional from a network share using dynamic updates downloaded from Microsoft. For example, if Tiffany had
downloaded the dynamic updates and extracted them to the Server1Updates share, she would do the following to install
Windows XP:
1. Run Server1XPprowinnt32 /duprepare:Server1Updates to ready the files for use.
2. Run Server1XPprowinnt32 /dushare:Server1Updates to start the installation with the downloaded update files.
16. Hacked by Piratez 70-270
The /dudisable switch prevents the dynamic update from occurring. The Update.exe command and the -s switch are not
required because you are not slipstreaming a service pack. You also do not need to specify a source for the installation files
when running Winnt32 from the Server1XPpro share (that would use the /s switch).
Note: The Windows XP Dynamic Update package only works if you are running an upgrade that is initiated by Winnt32.exe.
It does not work with Winnt.exe, booting off of the CD-ROM, booting off of the floppy disks, RIS installations, and
Winnt32.exe installations that are started from within WINPE.
Objective(s):
101. Perform and troubleshoot an attended installation of Windows XP Professional.
Reference(s):
TestOut for Windows XP Administration, Section 10.2
[101 #260]
You are the workstation administrator for your company. You have been asked to upgrade to Windows XP
Professional on 30 department computers that are currently running Windows 2000 Professional.
You copy the contents of the i386 folder from a Windows XP Professional CD-ROM to the //Server7/XPImage
network share. You start the installation on the first system and notice that there is a long pause as the computer
tries to perform dynamic updates over the Internet connection. You contact the router administrator who says the
Internet connection will be down all day.
You want to continue to upgrade to Windows XP, but prevent the install from trying to download any updates
during the install. What should you do?
j
k
l
m
n Run //Server7/XPImage/Winnt32.exe /makelocalsource, then run Winnt32.exe from the hard drive.
j
k
l
m
n Run //Server7/XPImage/Winnt32.exe /nodownload.
j
k
l
m
n Run //Server7/XPImage/Winnt32.exe /noupdate.
j
k
l
m
n Run //Server7/XPImage/Winnt32.exe /unattend.
i
j
k
l
m
n Run //Server7/XPImage/Winnt32.exe /dudisable.
Explanation:
Use the /dudisable switch to install Windows XP Professional without performing the Dynamic Update. After the installation,
you will need to update Windows XP.
Copying installation files to the hard drive with the /makelocalsource switch or performing an unattended installation without
a custom script file will not disable automatic updates. The other options are not valid switches for the Winnt32 command.
Objective(s):
101. Perform and troubleshoot an attended installation of Windows XP Professional.
Reference(s):
TestOut for Windows XP Administration, Section 10.1
[101 #268]
You are the desktop administrator for a small branch office. The branch office uses a shared 56k dialup
connection on Server2 to connect to the Internet You have been asked to upgrade 20 computers running
17. Hacked by Piratez 70-270
connection on Server2 to connect to the Internet. You have been asked to upgrade 20 computers running
Windows 98 to Windows XP Professional.
You check the HCL and find that the network card on each of the computers requires an updated driver for
Windows XP that is not included on the Windows XP CD-ROM, but it is included as a dynamic update. The
C:/XPInstall folder is shared on Server2 using the share name XPInstall. The C:/Updates folder is shared on
Server2 using the share name Updates. You copy the i386 directory from the Windows XP installation CD-ROM to
the XPInstall share on Server2. Next, you download the XP updates and extract them to the Updates shared
folder on Server2.
You want to install Windows XP on each computer while keeping Internet usage to a minimum and using the
updated driver for the network card. What should you do? (Choose two. Each correct choice is part of the
solution.)
c
d
e
f
g On each computer, run //Server2/Updates/winnt32.exe /duprepare://Server2/XPInstall.
c
d
e
f
g On each computer, run //Server2/XPInstall/winnt32.exe /duprepare://Server2/Updates.
c
d
e
f
g On each computer, run //Server2/Updates/winnt32.exe /dushare://Server2/XPInstall.
c
d
e
f
g On Server2, run C:/Updates/winnt32.exe /duprepare://Server2/XPInstall.
c
d
e
f
g On Server2, run C:/Updates/winnt32.exe /dushare://Server2/XPInstall.
b
c
d
e
f
g On each computer, run //Server2/XPInstall/winnt32.exe /dushare://Server2/Updates.
c
d
e
f
g On Server2, run C:/XPInstall/winnt32.exe /dushare://Server2/Updates.
b
c
d
e
f
g On Server2, run C:/XPInstall/winnt32.exe /duprepare://Server2/Updates.
Explanation:
To complete the installation, you will need to perform two tasks:
1. Prepare the updates for use during installation. Run Winnt32.exe from the XPInstall directory with the /duprepare
switch pointing to the Updates folder. You will only need to run this once to prepare the folder on the server.
2. On each computer, install Windows XP using the updated files. Run Winnt32.exe from the XPInstall directory with
the /dushare switch pointing to the Updates share. The installation files will use the updated files in the Updates share
when necessary.
Be sure to run Winnt32.exe each time from the XPInstall share (not the Updates share). Running Server2
XPInstallwinnt32.exe /duprepare:Server2Updates from each Windows 98 computer would prepare the updates 20
different times, whereas a single preparation is required (in addition, because of a bug this update procedure will not work
when run from a Windows 98 system). Running C:XPInstallwinnt32.exe /dushare:Server2Updates on the server would
attempt to install Windows XP on the server.
Objective(s):
101. Perform and troubleshoot an attended installation of Windows XP Professional.
Reference(s):
TestOut for Windows XP Administration, Section 10.2
[101 #277]
You are the desktop administrator for your company. You are installing Windows XP Professional on a Pentium II
computer. The computer has two hard drives, each of which contains a single 8 GB FAT32 partition. Windows 95
is installed on the first drive. All user data is stored on the second drive.
You want to use Windows XP rather than Windows 95 from now on. When you are finished, you want Windows
XP rather than Windows 95 on the first drive. You also want the existing user data on the second drive to be
accessible.
What should you do to minimize the amount of effort while achieving the desired results?
18. Hacked by Piratez 70-270
i
j
k
l
m
n Install a new Windows XP installation on the existing partition of the first drive.
Back up the data on the first drive. Reformat the partition on the first drive with NTFS. Install Windows XP
j
k
l
m
n and restore the data and directories.
j
k
l
m
n Delete the partition on the first drive. Then create a new partition and install Windows XP.
j
k
l
m
n Install a Windows XP upgrade installation on the existing partition of the first drive.
Explanation:
For this scenario, install Windows XP on the existing partition. The installation program will not remove the existing data
directories and files. (Keep in mind that it is always a good idea to back up the computer before performing major operations
such as this, although backing up is not a requirement in this scenario.)
You cannot upgrade from Windows 95 to Windows XP. Deleting the existing partition without backing up the data would
result in a data loss. Backing up the data, reformatting the partition, and installing Windows XP would provide the desired
results. However, reformatting the drive and restoring the data is unnecessary. If user data were stored on the first drive, this
would be the desired action because data stored in a user profile folder can be overwritten when installing Windows XP to
an existing Windows folder. The existing Windows folder is removed before the new Windows XP installation takes place
(you should be warned of this before the Windows XP installation begins.)
Objective(s):
101. Perform and troubleshoot an attended installation of Windows XP Professional.
Reference(s):
TestOut for Windows XP Administration, Section 10.1
[101 #289]
You are the desktop administrator for your company. You are upgrading a Windows 98 computer to Windows XP
Professional. The computer has a single 20 GB hard drive with a single FAT32 partition that has 9.3 GB of free
space.
You insert the Windows XP Professional CD-ROM, restart the computer, and boot to the installation program on
the CD. You choose to install Windows XP Professional to the existing partition and keep the existing file system
intact. The installation program then displays a message indicating that the current files in the /Windows folder
(and perhaps even documents in the My Documents folder) will be deleted.
You want to upgrade Windows 98, including upgrading system and user settings and keeping user files. What
should you do?
j
k
l
m
n Specify a different installation folder and continue the setup process.
j
k
l
m
n Continue the setup process. Afterwards, convert the drive from FAT32 to NTFS.
Boot the computer to Windows 98. Back up user data files and the registry. Re-run the installation program
j
k
l
m
n as you did previously. Afterwards, restore the registry settings and user data that you backed up.
Boot the computer to Windows 98, insert the Windows XP Professional CD, and run the 32-bit installation
i
j
k
l
m
n program.
Explanation:
To upgrade Windows 98, Windows NT 4.0, or Windows 2000, start the Winnt32.exe installation program from inside the
existing operating system rather than booting to the Windows XP Professional CD and running Winnt.exe. Winnt.exe installs
a clean copy of Windows XP Professional.
19. Hacked by Piratez 70-270
Objective(s):
101. Perform and troubleshoot an attended installation of Windows XP Professional.
Reference(s):
TestOut for Windows XP Administration, Section 10.1
[101 #300]
You are the desktop administrator for your company. You are installing Windows XP Professional on a new
computer that has the following hardware:
PCI video adapter
PCI network adapter
24-bit sound card
ISA SCSI adapter and one internal SCSI hard disk
CD-ROM drive
Floppy drive
You boot to the Windows XP Professional CD-ROM and begin the installation. During the installation, you receive
an error message indicating that Setup cannot locate a hard drive. You verify that the SCSI hard drive is in
working condition and is supported under Windows XP. You also verify SCSI IDs and terminations. You then
restart the installation, but receive the same error message.
You want to successfully complete the installation of Windows XP Professional on this computer. What should you
do?
j
k
l
m
n Replace the SCSI Adapter with an IDE adapter.
j
k
l
m
n Set the IRQ for the SCSI adapter.
i
j
k
l
m
n Restart the Installation, and choose F6 to install the driver for the SCSI adapter.
j
k
l
m
n Modify the system BIOS to allow the computer to boot from the SCSI hard drive.
Explanation:
You need to supply the appropriate SCSI adapter driver from a floppy disk and restart the installation of Windows XP. Most
likely the driver for the SCSI adapter is not accessible to Windows XP Professional, which is preventing XP from locating the
hard drive attached to the SCSI adapter. During the text-mode portion of the XP installation you will see an informational
message at the bottom that says to press F6 if you need to install a third-party SCSI or RAID driver.
Replacing the SCSI adapter reduces the overall functionality and configuration options of your computer, and would be
costly to do on all machines. The new computer should already be configured to boot from the hard drive, and the IRQ for
the SCSI adapter should also be pre-set.
Objective(s):
101. Perform and troubleshoot an attended installation of Windows XP Professional.
Reference(s):
TestOut for Windows XP Administration, Section 10.1
[101 #308]
You are the desktop administrator for your company. Shanda, a software tester, contacts you and asks you to
20. Hacked by Piratez 70-270
walk her through the process of installing Windows XP Professional on a lab computer.
You first ask Shanda to summarize the computer's hardware requirements. Shanda indicates that the computer is
a Pentium II 300 MHz computer with 64 MB of RAM. It has an 8 GB hard drive formatted with FAT32. The drive
has 1 GB of free space.
You need to make sure Shanda can install Windows XP. What should you instruct Shanda to do?
j
k
l
m
n Update the system BIOS.
j
k
l
m
n Add more memory.
j
k
l
m
n Reformat the hard drive with NTFS.
i
j
k
l
m
n Free up hard disk space.
Explanation:
You must increase the amount of free disk space to complete the installation. Windows XP Professional requires a minimum
of 1.5 GB for the install. If the computer has too little disk space, you'll receive the error 'Not enough disk space for
installation.'
You can use Setup to create a partition from existing free space on the hard drive. If there isn't enough free space, you must
delete files from the installation partition. You can also delete existing partitions and create a new partition that's large
enough for installation. Be aware that you will lose all data if you delete a partition.
Objective(s):
101. Perform and troubleshoot an attended installation of Windows XP Professional.
Reference(s):
TestOut for Windows XP Administration, Section 10.1
[101 #316]
You are the desktop administrator for your company. You are installing Windows XP Professional on a new
computer.
You have created an answer file with the Setup Manager Wizard. The answer file supports a fully-automated
Windows XP installation.
You want to use the answer file you have created as you install Windows XP Professional from the Windows XP
installation CD. What should you do? (Choose two. Each correct choice is part of the solution.)
b
c
d
e
f
g Name the answer file Winnt.sif.
c
d
e
f
g Copy the answer file to a network share.
c
d
e
f
g Name the answer file Unattend.inf.
c
d
e
f
g Name the answer file Udf.txt.
c
d
e
f
g Name the answer file Unattend.txt.
b
c
d
e
f
g Copy the answer file to a floppy.
Explanation:
An automated installation of Windows XP performed from the CD-ROM requires the name of the answer file to be Winnt.sif.
During the CD installation of Windows XP, the setup program looks for the Winnt.sif file on the floppy drive of the computer
21. Hacked by Piratez 70-270
where the installation is being performed. The unattended installation will not check for any other file names in any other
locations while performing the installation from the CD-ROM.
Objective(s):
102. Perform and troubleshoot an unattended installation of Windows XP Professional.
Reference(s):
TestOut for Windows XP Administration, Section 10.2
[102 #260]
You are the desktop administrator for your company. You have been asked to install Windows XP Professional on
15 new systems that have identical hardware. Microsoft Office and the company's standard anti-virus software
also needs to be installed on each system.
You prepare a source computer with the required software and create an RIS image. After deploying the RIS
Image to the first computer, you notice that icons for Microsoft Office and the anti-virus software do not appear.
You restart the source computer and verify that the icons are present.
By default, you want the icons to appear on new computers as they do on the source computer. However, you do
not want to prevent users from deleting or moving the icons to a different location, if they so desire. What should
you do?
On the source computer, copy the local administrator account profile to the Default User profile. Recreate the
i
j
k
l
m
n RIS image.
j
k
l
m
n On the source computer, copy the All Users profile to the Default User profile. Recreate the RIS image.
j
k
l
m
n On the source computer, run Rbfg.exe before installing the standard applications. Recreate the RIS image.
j
k
l
m
n On the source computer, run Riprep.exe before installing the standard applications. Recreate the RIS image.
On the source computer, copy the local administrator account profile to the All Users profile. Recreate the
j
k
l
m
n RIS image.
Explanation:
To modify the RIS image, copy the local administrator account profile to the Default User profile. When you created the RIS
image, you were logged on as an administrator. When the applications were installed, icons were added to the current user
(not to the All Users profile or the Default User profile). You need to copy the icons (shortcut files) from the administrator
profile to the Default User profile so that the changes will be applied to all new users. You can do this by copying the
individual shortcut files or by copying the entire profile. If you copy the entire profile, you should log on to the computer using
a different administrative account (you should not copy to or from the profile of a currently logged on user). You should
perform the copy to the Default User profile rather than the All Users profile. Because each new user's profile is a copy of the
Default User profile, each user will be able to update his or her own profile without affecting other users. The All Users profile
applies to all users and only users with appropriate administrative privileges can update the All Users profile.
Rbfg.exe is used to create the boot disk for non-PXE compliant network adapters, and will not impact the RIS image.
Riprep.exe is used to create the image of the reference computer. If you ran it before you added the applications, the
applications would not be available to anyone. The All Users profile will not contain the custom settings that were created
during the installation of the applications.
Objective(s):
102. Perform and troubleshoot an unattended installation of Windows XP Professional.
Reference(s):
TestOut for Windows XP Administration, Section 10.2
22. Hacked by Piratez 70-270
[102 #270]
You are a temporary administrator hired to assist in the rollout of 500 Windows XP Professional clients at a new
office building in Phoenix. No services currently exist on the network.
You verify that all the new machines have PXE-compliant network cards and decide to use RIS to perform the
installation.
You want to install and configure the necessary services to perform an RIS installation. What should you do?
(Choose all that apply.)
b
c
d
e
f
g Install and configure DHCP.
b
c
d
e
f
g Install and configure RIS.
b
c
d
e
f
g Install and configure DNS.
b
c
d
e
f
g Install and configure Active Directory.
c
d
e
f
g Install and configure SMS.
b
c
d
e
f
g Authorize the RIS server.
b
c
d
e
f
g Authorize the DHCP server.
c
d
e
f
g Install and configure WINS.
c
d
e
f
g Install and configure SNMP.
Explanation:
An RIS installation of Windows XP requires DHCP, DNS, RIS, and Active Directory. When the PXE-compliant machine
boots up, it requests IP information, including a DNS Server address, from DHCP. If RIS is running on the DHCP server,
DHCP also provides the RIS server address. Otherwise, the RIS server responds to a subsequent client DHCP broadcast to
identify itself as a boot server. Both DHCP and RIS must therefore be authorized to respond to DHCP requests on the
network. The client then contacts the RIS server to begin the installation of Windows XP Professional. Before beginning the
installation, the RIS server contacts Active Directory (which requires a DNS lookup) and gets configuration information,
some of which determines whether the RIS server will respond to the installation request at all.
Objective(s):
102. Perform and troubleshoot an unattended installation of Windows XP Professional.
Reference(s):
TestOut for Windows XP Administration, Section 10.2
[102 #278]
You are the desktop administrator for K.J. Fountains. You have been asked to create an automated installation
process for 75 Windows XP Professional installations. Each new computer contains a 40 GB hard drive, floppy
drive, and a DVD-ROM drive. They do not contain a network card or sound card.
You create an answer file that contains the standard installation settings and decide to use the Sysprep utility to
prepare a source computer image, which you will duplicate.
Which two actions should you take in preparation to use Sysprep? (Choose two. Each correct answer is part of the
solution.)
23. Hacked by Piratez 70-270
c
d
e
f
g Copy Setupcl.exe to the C:/Windows directory.
c
d
e
f
g Copy Setupcl.exe to the C:/Windows/System32 directory.
b
c
d
e
f
g Copy Setupcl.exe to the C:/Sysprep directory.
c
d
e
f
g Copy Setupcl.exe to the root of the C: drive.
c
d
e
f
g Copy Sysprep.exe to the C:/Windows directory.
c
d
e
f
g Copy Sysprep.exe to the C:/Windows/System32 directory.
b
c
d
e
f
g Copy Sysprep.exe to the C:/Sysprep directory.
c
d
e
f
g Copy Sysprep.exe to the root of the C: drive.
Explanation:
Sysprep.exe prepares the system for duplication. Setupcl.exe runs a mini-setup wizard when the duplicated drive is booted.
Sysprep.inf is an optional answer file that automates the mini-setup wizard. It follows the same format as a typical answer
file, but it must be named Sysprep.inf. Typically, you put all these files in the Sysprep folder at the root of the system drive
(C:Sysprep in this case). You can also put the Sysprep.inf file on a floppy disk, which can be inserted when the mini-setup
wizard begins.
Objective(s):
102. Perform and troubleshoot an unattended installation of Windows XP Professional.
Reference(s):
TestOut for Windows XP Administration, Section 10.2
[102 #288]
You are the desktop administrator for K.J. Fountains. You have been asked to create an automated installation
process for 75 Windows XP Professional installations. Each new computer contains a 40 GB hard drive, floppy
drive, and a DVD-ROM drive. They do not contain a network card or sound card.
You want to prepare a source computer for imaging. You copy the Sysprep.exe and Setupcl.exe files to the source
computer’s C:/Sysprep folder.
You want to automate the setup process. Which additional actions should you take? (Choose two. Each correct
answer is part of the solution.)
c
d
e
f
g Create an answer file named Winnt.sif.
c
d
e
f
g Create an answer file named Unattend.txt.
b
c
d
e
f
g Create an answer file named Sysprep.inf.
c
d
e
f
g Copy the answer file to the C:/Windows directory.
c
d
e
f
g Copy the answer file to the C:/Windows/System32 directory.
b
c
d
e
f
g Copy the answer file to the C:/Sysprep directory.
Explanation:
Sysprep.exe prepares the system for duplication. Setupcl.exe runs a mini-setup wizard when the duplicated drive is booted.
Sysprep.inf is an optional answer file that automates the mini-setup wizard. It follows the same format as a typical answer
file, but it must be named Sysprep.inf. Typically, you put all these files in the Sysprep folder on the C: drive (Windows XP
should be installed on the C: drive). You can also put the Sysprep.inf file on a floppy disk, which can be inserted when the
mini-setup wizard begins.
24. Hacked by Piratez 70-270
Objective(s):
102. Perform and troubleshoot an unattended installation of Windows XP Professional.
Reference(s):
TestOut for Windows XP Administration, Section 10.2
[102 #300]
You are the desktop administrator for your company. You use RIS to install Windows XP Professional on client
computers.
You have been asked to install Windows XP Professional on a computer that has the following attributes:
1.2 GHz CPU
256 MB RAM
10 GB hard drive
PCI network adapter
Floppy drive
PXE-compliant = No
You want to use RIS to complete the installation. What should you do?
i
j
k
l
m
n Run Rbfg.exe, located in the RemoteInstall/admin/i386 folder on the Remote Installation Server.
j
k
l
m
n Run Rbfg.exe, located in the i386 folder on the Windows 2000 Server installation CD-ROM.
j
k
l
m
n Run Makeboot.exe, located in the RemoteInstall/admin/i386 folder on the Remote Installation Server.
j
k
l
m
n Run Makeboot.exe, located in the i386 folder on the Windows 2000 Server installation CD-ROM.
Explanation:
You can use RIS with clients that don't support the Net PC specification (non-PXE compliant) by creating a remote
installation boot disk. This boot disk simulates the PXE boot process. Use the Windows Remote Boot Disk Generator
(Rbfg.exe) to create the boot disk. The Rbfg.exe file is located in the RemoteInstalladmini386 folder on the Remote
Installation Server. Not all network adapters are supported, so the computer must contain one of the PCI adapters listed in
the Adapters List in the Remote Boot Disk Generator.
Objective(s):
102. Perform and troubleshoot an unattended installation of Windows XP Professional.
Reference(s):
TestOut for Windows XP Administration, Section 10.2
[102 #310]
You are the desktop administrator for your company. You have been asked to install Windows XP Professional on
30 PXE-compliant computers and 35 non-PXE-compliant computers. All hardware for the 65 computers is
included on the current hardware compatibility list (HCL).
You create an RIS image and copy the image to multiple RIS servers. You also pre-stage each computer in Active
Directory. You then start the 65 computers. The 30 PXE-compliant computers connect to the RIS server and begin
the installation. However, the 35 non-PXE-compliant computers cannot connect to the RIS server.
You want to use RIS to complete the Windows XP installation on all the computers What should you do?
25. Hacked by Piratez 70-270
You want to use RIS to complete the Windows XP installation on all the computers. What should you do?
j
k
l
m
n Grant the Everyone group NTFS Read permission for the RIS image.
j
k
l
m
n Grant the Administrators group NTFS Read permission for the RIS image.
i
j
k
l
m
n Run Rbfg.exe to create a non-PXE-compliant startup disk.
j
k
l
m
n Run Riprep.exe to create a non-PXE-compliant startup disk.
Explanation:
Because the installation works for the PXE-compliant computers, permissions are not likely the problem. Use the Remote
Boot Disk Generator (Rbfg.exe) to create a floppy disk for computers that do not contain the PXE-based remote boot ROM.
You can then use the Remote Installation Services feature for these computers. Not all network adapters are supported, so
the computer must contain one of the PCI adapters listed in the Adapters List in the Remote Boot Disk Generator.
Objective(s):
102. Perform and troubleshoot an unattended installation of Windows XP Professional.
Reference(s):
TestOut for Windows XP Administration, Section 10.2
[102 #318]
You are the network administrator for your company. You have 60 Windows 98 computers on your network on
which you want to install Windows XP Professional.
Because there is no important data on the computers, you decide to use RIS to install a clean copy of Windows
XP over the top of the existing Windows 98 installation. The computers all require the same Hardware Abstraction
Layer (HAL) and are PXE-compliant. However, the installation works only on the first 20 computers.
You want to complete the Windows XP installation on the remaining computers. What should you do?
j
k
l
m
n Change the CMOS settings.
i
j
k
l
m
n Add more IP addresses to the DHCP server.
j
k
l
m
n Make startup disks using Rbfg.exe.
j
k
l
m
n Make startup disks using Riprep.exe.
Explanation:
When PXE-compliant computers begin the installation process, they request a new IP address from the DHCP server. If
your Windows 98 computers leased IP addresses from the DHCP server for the default time of eight days, there is still some
time before those 60 IP addresses will be free. If you run out of IP addresses, you will need to increase the size of the DHCP
scope or release IP addresses on some of the computers. You do not make startup disks with Riprep. You only make
startup disks with Rbfg when your computers are non-PXE-compliant. If there is a problem with the CMOS configuration of
some computers, it is highly unlikely that the problem will manifest itself as described in the question.
Objective(s):
102. Perform and troubleshoot an unattended installation of Windows XP Professional.
Reference(s):
26. Hacked by Piratez 70-270
TestOut for Windows XP Administration, Section 10.2
[102 #326]
You are the administrator of your company's network. Your network has 10 Windows 2000 Server computers in
the westsim.com domain. Your network also has 175 Windows 98 computers. You want to perform a clean
installation of Windows XP Professional on all of the Windows 98 computers. All of the Windows 98 computers
use the same Hardware Abstraction Layer (HAL) and are PXE-compliant.
You want to accomplish the following goals:
Perform an unattended installation of Windows XP Professional.
Perform an unattended installation of company-standard applications during the installation of Windows XP
Professional.
Assign each computer a unique security identifier (SID).
Modify the unattended installation script so computers automatically join the westsim.com domain.
You propose the following course of action:
1. Install Windows XP Professional on a Windows 98 computer.
2. Install and configure company-standard applications on that computer.
3. Use Setup Manager on the computer to create an Unattend.txt file based on the current configuration,
including domain membership.
4. Start the remaining Windows 98 computers, and then install Windows XP Professional. Use the
Unattend.txt file from the first computer to provide the settings for the installation.
Which result or results do these actions produce? (Select all that apply.)
b
c
d
e
f
g Assign each computer a unique security identifier (SID).
b
c
d
e
f
g Modify the unattended installation script so computers automatically join the westsim.com domain.
b
c
d
e
f
g Perform an unattended installation of Windows XP Professional.
Perform an unattended installation of company-standard applications during the installation of Windows XP
c
d
e
f
g Professional.
Explanation:
The proposed solution does not install the company applications. You must use Riprep.exe to create an RIS image of a
source computer after installing the company applications. The proposed solution does not use RIS at all.
Objective(s):
102. Perform and troubleshoot an unattended installation of Windows XP Professional.
Reference(s):
TestOut for Windows XP Administration, Section 10.2
[102 #334]
You are the desktop administrator for your company. You need to upgrade several computers from Windows NT
Workstation 4.0 to Windows XP Professional.
You manually create an Unattend.txt file using a text editor and copy the file to a floppy disk. You then start the
installation on a test computer using the Windows XP Professional CD-ROM. You insert the floppy disk after the
computer starts. Although you have set the user interaction level to full unattended mode, you are prompted for all
the required parameters.
27. Hacked by Piratez 70-270
You want to ensure that the unattended installation does not prompt you for input. What should you do? (Choose
two. Each choice represents part of the solution.)
b
c
d
e
f
g On the floppy disk, rename Unattend.txt to Winnt.sif.
c
d
e
f
g On the floppy disk, rename Unattend.txt to Win2000.sif.
c
d
e
f
g On the floppy disk, rename Unattend.txt to Winnt.inf.
b
c
d
e
f
g Under [Data] in the Unattend.txt file, verify that the Unattendedinstall parameter is set to Yes.
c
d
e
f
g In the [Unattended] section of the Unattend.txt file, set the Unattendmode parameter to Fullunattended.
Explanation:
Windows XP provides the ability to perform an unattended installation from a CD-ROM. To perform an unattended
installation from a CD-ROM, the following conditions must be met:
The computer must support booting from a CD-ROM, and must adhere to the El-Torito non-emulation specification.
The unattended answer file must be renamed to Winnt.sif and copied to a floppy disk so Setup can access it. When
Setup displays the message that it is examining the hardware configuration, insert the floppy disk containing the
Winnt.sif file.
The answer file must contain a valid [Data] section with the following entries to the unattended answer file:
UnattendedInstall=Yes - Value must be set to "yes".
MSDosInitiated=No - Value must be set to "no" or Setup will stop during the graphical portion of Setup.
AutoPartition=1 - If the value is set to 1, the installation partition is automatically selected. If the value is set to 0
(zero), you are prompted for the installation partition during the text portion of Setup.
Objective(s):
102. Perform and troubleshoot an unattended installation of Windows XP Professional.
Reference(s):
TestOut for Windows XP Administration, Section 10.2
[102 #342]
You are the desktop administrator for your company. You are preparing an unattended answer file for ten new
Windows XP Professional computers. The person initiating the setups should not have to answer questions during
the installations.
You want to comply with Microsoft licensing requirements. How do you accept the terms of the license agreement
for all new installations?
j
k
l
m
n Create the license agreement answer in the [LicenseFilePrintData] section of the answer file.
j
k
l
m
n Include /L:Yes as a switch when you run Winnt32.exe.
Create the license agreement answer in a UDF file associated with the computer name of each computer that
j
k
l
m
n will be installed.
i
j
k
l
m
n Accept the terms of the license agreement while using Setup Manager to prepare the answer file.
Explanation:
While in Setup Manager, you will be asked to accept the terms of the license agreement for all unattended installations if you
choose the Fully Automated option. Using the /unattend switch with Winnt32 also affirms that you and/or the user have read
and accepted the Microsoft License Agreement for Windows XP. However, you use Winnt32 when upgrading from Windows
98/ME or NT/2000, not on a new computer.
28. Hacked by Piratez 70-270
Objective(s):
102. Perform and troubleshoot an unattended installation of Windows XP Professional.
Reference(s):
TestOut for Windows XP Administration, Section 10.2
[102 #351]
You are the desktop administrator for your company. You are installing Windows XP Professional on several
computers throughout your company’s site.
You copy the installation files to the XPPro share on the NY-CORP-SRV1 server. You also create an answer file
named Unattend.txt and a Uniqueness Database File named Unique.udb. You copy both the answer file and
uniqueness database to the XPPro share. You boot a computer with a Windows 98 boot disk in the A: drive. You
also connect to the XPPro share. The computer will be named NY-DEV-WRK4, and appropriate entries have been
made in the Uniqueness Database File under that name.
What command should you enter to begin the installation?
j
k
l
m
n Winnt /u:unattend.txt /udb: unique.udb,NY-DEV-WRK4 /s://NY-CORP-SRV1/XPPro
j
k
l
m
n Winnt32 /unattend:unattend.txt /udf:unique.udb,NY-DEV-WRK4 /s://NY-CORP-SRV1/XPPro
j
k
l
m
n Winnt32 /unattend:unattend.txt /udb:unique.udb,NY-DEV-WRK4 /s://NY-CORP-SRV1/XPPro
j
k
l
m
n Winnt /u:unattend.txt /udb:NY-DEV-WRK4,unique.udb /s://NY-CORP-SRV1/XPPro
j
k
l
m
n Winnt /u:unattend.txt /udf:unique.udb,NY-DEV-WRK4 /s://NY-CORP-SRV1/XPPro
i
j
k
l
m
n Winnt /u:unattend.txt /udf:NY-DEV-WRK4,unique.udb /s://NY-CORP-SRV1/XPPro
j
k
l
m
n Winnt32 /unattend:unattend.txt /udf:NY-DEV-WRK4,unique.udb /s://NY-CORP-SRV1/XPPro
j
k
l
m
n Winnt32 /unattend:unattend.txt /udb:NY-DEV-WRK4,unique.udb /s://NY-CORP-SRV1/XPPro
Explanation:
Because you are running the setup from MS-DOS (a Windows 98 boot disk starts MS-DOS), you must use Winnt. You can
only use Winnt32 when starting the installation from inside a 32-bit operating system (Windows 95, 98, ME, NT 4, 2000, or
XP). Use the /u switch to indicate that you will be using an unattended answer file. Use the /udf switch to use a Uniqueness
Database File. The computer's ID goes before the name of the Uniqueness Database File name. Use the /s switch to specify
the path to the source files.
Objective(s):
102. Perform and troubleshoot an unattended installation of Windows XP Professional.
Reference(s):
TestOut for Windows XP Administration, Section 10.2
[102 #359]
You are the desktop administrator for K.J. Fountains. You have been asked to create an automated installation
process for 75 Windows XP Professional installations. Each new computer contains a 40 GB hard drive, floppy
drive, and a DVD-ROM drive. They do not contain a network card or sound card.
You prepare a source computer for imaging using Sysprep and apply the image to the first computer's hard drive.
29. Hacked by Piratez 70-270
However, when you boot the computer, you must complete a short setup process.
You want to ensure that users do not need to complete a setup program when they turn their new computers on.
What can you do? (Choose two. Each correct answer is part of the solution.)
Create an answer file named Winnt.sif and copy it to the C:/Sysprep folder on the source computer. Recreate
c
d
e
f
g the image.
Create an answer file named Unattend.txt and copy it to the C:/Sysprep folder on the source computer.
c
d
e
f
g Recreate the image.
Create an answer file named Sysprep.inf and copy it to the C:/Sysprep folder on the source computer.
b
c
d
e
f
g Recreate the image.
Create an answer file named Sysprep.inf and copy it to a floppy disk. Instruct each user to insert the floppy
b
c
d
e
f
g disk when their new computer boots for the first time.
Create an answer file named Winnt.sif and copy it to a floppy disk. Instruct each user to insert the floppy disk
c
d
e
f
g when their new computer boots for the first time.
Create an answer file named Unattend.inf and copy it to a floppy disk. Instruct each user to insert the floppy
c
d
e
f
g disk when their new computer boots for the first time.
Explanation:
A mini-setup wizard runs when a Sysprep image is booted. Sysprep.inf is an optional answer file that automates the mini-
setup wizard. It follows the same format as a typical answer file, but it must be named Sysprep.inf. Typically, you put all
these files in the Sysprep folder on the system drive (C:Sysprep in this case). You can also put the Sysprep.inf file on a
floppy disk, which can be inserted when the mini-setup wizard begins.
Objective(s):
102. Perform and troubleshoot an unattended installation of Windows XP Professional.
Reference(s):
TestOut for Windows XP Administration, Section 10.2
[102 #375]
You are the desktop administrator for your company. You use RIS to install Windows XP Professional on client
computers.
You have been asked to install Windows XP Professional on a computer that has the following attributes:
1.2 GHz CPU
256 MB RAM
10 GB hard drive
ISA network adapter
Floppy drive
PXE-compliant = No
You want to use RIS to complete the installation. What should you do?
j
k
l
m
n Run Rbfg.exe, located in the RemoteInstall/admin/i386 folder on the Remote Installation Server.
j
k
l
m
n Run Makeboot.exe, located in the i386 folder on the Windows 2000 Server installation CD-ROM.
j
k
l
m
n Run Makeboot.exe, located in the RemoteInstall/admin/i386 folder on the Remote Installation Server.
j
k
l
m
n Run Rbfg.exe, located in the i386 folder on the Windows 2000 Server installation CD-ROM.
i
j
k
l
m
n Run Rbfg.exe and examine the list of supported network adapters. Install a supported PCI network adapter.
30. Hacked by Piratez 70-270
Explanation:
You can use RIS with clients that don't support the Net PC specification (non-PXE compliant) by creating a remote
installation boot disk. This boot disk simulates the PXE boot process. Use the Windows Remote Boot Disk Generator
(Rbfg.exe) to create the boot disk. The Rbfg.exe file is located in the RemoteInstalladmini386 folder on the Remote
Installation Server. Not all network adapters are supported, so the computer must contain one of the PCI adapters listed in
the Adapters List in the Remote Boot Disk Generator. ISA and PCMCIA adapters are not supported.
Reference(s):
TestOut for Windows XP Administration, Section 10.2
[102 #387]
You are the desktop administrator for your company. You have just installed and configured a network RIS Server
to assist in the deployment of Windows XP Professional.
When booting the Accounting manager's new computer to begin installing Windows XP Professional, you receive
an error message indicating that an operating system is not found. You review the Windows XP Professional HCL
and verify that the PXE-compliant network card is supported by XP.
You need to complete the Windows XP installation using RIS as soon as possible. What should you do?
j
k
l
m
n Configure the DHCP server to assign a DNS server address.
j
k
l
m
n Install and configure a DNS server on the same subnet as the RIS server.
i
j
k
l
m
n Configure the computer's BIOS settings to allow it to boot from the network.
Modify the RIS Server permissions to give yourself administrative permissions to the Windows XP
j
k
l
m
n Professional image.
Explanation:
There is a BIOS setting that must be enabled to permit the computer to boot from the network. This BIOS setting, in
conjunction with the PXE-compliant network card, enables the computer to contact the RIS server. The PXE-compliant
computer receives IP configuration information by contacting a DHCP server. If the RIS service is installed on the same
computer as the DHCP service, the RIS server address is also returned. Otherwise, the RIS server responds to a
subsequent DHCP broadcast by the client. If a RIS server cannot be found and an existing operating system does not exist
on the computer, a message indicating that an operating system could not be found might occur. RIS uses DNS to contact
an Active Directory server and obtain RIS configuration information. The domain-user account used to perform the
installation requires the Log on as a Batch Job user right on the RIS server.
Reference(s):
TestOut for Windows XP Administration, Section 10.2
[102 #396]
You are the desktop administrator for your company. A software tester needs you to install Windows XP
Professional on a computer currently running Windows 95. You need to retain the Windows 95 installation and set
up a dual-boot configuration.
You examine the computer's hardware and discover that it is a Pentium II 266 MHz computer with 64 MB of RAM
and 500 MB of free space remaining on the hard disk.
You need to complete the Windows XP installation. What should you do before starting the installation?
31. Hacked by Piratez 70-270
j
k
l
m
n Upgrade the processor.
j
k
l
m
n Add more memory.
i
j
k
l
m
n Free up more disk space.
j
k
l
m
n Run Winnt32 /checkupgradeonly.
Explanation:
Before beginning the installation, you will need additional disk space. Windows XP requires a minimum of 1.5 GB of free disk
space. Although additional memory and a faster processor are recommended, they are not required. You would not run
Winnt32 /checkupgradeonly from within Windows 95 because you will not be upgrading the operating system (Windows 95
cannot be upgraded to Windows XP directly).
Objective(s):
103. Upgrade from a previous version of Windows to Windows XP Professional.
Reference(s):
TestOut for Windows XP Administration, Section 10.1
[103 #260]
You are the desktop administrator for your company. The manager of your Human Resources department has
recently acquired an application that will help manage employee benefits. The application will run only on
Windows 2000 or Windows XP Professional. She is currently running Windows 98 on her computer and wants you
to upgrade her computer to Windows XP Professional.
You begin by checking the hardware of her computer and discover she has 256 MB of RAM, a Pentium 166 MHz
processor, a 4 GB drive that has 2 GB of free space, a super VGA video adapter, and an 8 speed CD-ROM.
You want to perform an unattended installation of Windows XP from the CD-ROM. What should you do to ensure
you have a successful installation?
j
k
l
m
n Install an additional 4 GB hard drive.
j
k
l
m
n Add an additional 128 MB of RAM.
i
j
k
l
m
n Upgrade the processor to a 300 MHz processor.
j
k
l
m
n Upgrade the CD-ROM drive to faster model.
Explanation:
The minimum processor speed for a Windows XP Professional installation is 233 MHz, with a recommended processor
speed of 300 MHz. The Windows XP installation also requires at least 1.5 GB free disk space, 64 MB of RAM,
(recommended 128), a Super VGA card, CD-ROM or DVD-ROM drive, as well as the standard keyboard and pointing
device. You should also check that the CD-ROM or DVD-ROM drive is on the Windows XP Hardware Compatibility List
(HCL).
Objective(s):
103. Upgrade from a previous version of Windows to Windows XP Professional.
Reference(s):
32. Hacked by Piratez 70-270
TestOut for Windows XP Administration, Section 10.1
[103 #268]
You are the desktop administrator for your company. You are preparing to upgrade a Windows 98 computer to
Windows XP Professional.
In preparation for the upgrade, you consult the Windows XP Professional minimum hardware requirements and
discover that the computer meets minimum requirements.
You want to verify that the computer's existing applications are compatible with Windows XP. What should you
do?
Create an Unattend.txt file and perform a Windows XP Professional installation on a similar machine. Test all
j
k
l
m
n applications on the Windows XP system.
Install Windows XP on a different partition on the Windows 98 machine. Delete the Windows 98 partition after
j
k
l
m
n you have successfully used all applications under Windows XP.
j
k
l
m
n Create a Windows XP Professional image, copy it to a network share, and perform the installation using RIS.
i
j
k
l
m
n Run the winnt32/checkupgradeonly command on the Windows 98 computer.
Explanation:
Running winnt32/checkupgradeonly on a Windows 98 machine performs a check on your computer for upgrade compatibility
with Windows XP. If you use this option with /unattend, no user input is required. Otherwise, the results are displayed on the
screen, and you can save them under the file name you specify. The default file name is Upgrade.txt and it is stored in the %
systemroot% folder.
Performing a Windows XP installation on another machine and then installing the required applications would not be an
efficient way to determine the compatibility of an existing Windows 98 machine with Windows XP Professional. Installing
Windows XP on a different partition would also require you to install and test all applications on the new XP installation. You
cannot use RIS to perform an upgrade.
Objective(s):
103. Upgrade from a previous version of Windows to Windows XP Professional.
Reference(s):
TestOut for Windows XP Administration, Section 10.1
[103 #276]
You are the desktop administrator for your company. You are upgrading 26 Windows 98 computers to Windows
XP Professional. You need to examine each computer's hardware and software readiness for Windows XP
Professional.
You boot each computer and run the Winnt32 /checkupgradeonly command, along with the /unattend switch.
Which file should you examine after the command completes successfully?
j
k
l
m
n %systemroot%/compat.txt
j
k
l
m
n C:/compat.inf
i
j
k
l
m
n %systemroot%/upgrade.txt
j
k
l
m
n C:/compat.txt
33. Hacked by Piratez 70-270
Explanation:
The default file name is Upgrade.txt and it is stored in the %systemroot% folder (the folder where the current operating
system files are stored). Running winnt32/checkupgradeonly on a Windows 98 machine performs a check on your computer
for upgrade compatibility with Windows XP. If you use this option with /unattend, no user input is required. Otherwise, the
results are displayed on the screen, and you can save them under the file name you specify.
Objective(s):
103. Upgrade from a previous version of Windows to Windows XP Professional.
Reference(s):
TestOut for Windows XP Administration, Section 10.1
[103 #284]
You are the desktop administrator for your company. You need to upgrade the company CEO's computer from
Windows 98 to Windows XP Professional without losing any files or settings.
You begin by running the Winnt32 /checkupgradeonly command to ensure the computer and its applications are
compatible with Windows XP Professional. You quickly discover that the hardware is not adequate for an
installation of Windows XP, and you acquire a new computer.
You need to ensure that all of the CEO’s files and settings are migrated to Windows XP Professional. What should
you do? (Choose two. Each correct choice is part of the solution.)
c
d
e
f
g Manually copy the personal data files and settings to the new computer.
c
d
e
f
g Export registry settings from the old computer and import them on the new computer.
c
d
e
f
g Use the local group policy editor on the new system to import all personal settings.
b
c
d
e
f
g Run the Scanstate command-line tool on the old system.
c
d
e
f
g Use the local group policy editor on the old system to export all personal settings.
c
d
e
f
g Change the CEO’s local profile to a roaming profile.
b
c
d
e
f
g Run the Loadstate command-line tool on the new system.
Explanation:
The Scanstate command-line utility allows you to save existing settings and files for use with Windows XP Professional.
After the successful installation of Windows XP, you use the Loadstate utility to load the settings and files on to the
destination machine.
Manually copying files or exporting and importing policy or registry settings will be insufficient to capture all settings
completely and apply them to the new systems. Windows 98 and Windows XP user profiles are incompatible, so simply
using a roaming profile will not work.
Objective(s):
103. Upgrade from a previous version of Windows to Windows XP Professional.
Reference(s):
TestOut for Windows XP Administration, Section 10.1
[103 #292]