Enjoy Night ≽ 8448380779 ≼ Call Girls In Gurgaon Sector 52 (Gurgaon)
Sullivan Palatek Product Book
1. Distributed by
Sullivan-Palatek
1201 W. US Highway 20
Michigan City, IN 46360
PH: (800) 438-6203
FX: (800) 725-6203
info@palatek.com
www.sullivanpalatek.com
Product HM 5/13 2M
Filters
40-500 HP
Refrigerated Air Dryers
NEW
CRP-IDC
“The Ultimate Performance
Rotary Screw Air Compressor”
Manufacturer of Electric Air
Compressor for Industrial Use
Featuring
Rotary Screw Air Compressors
Manufactured in U.S.A.
5-10 HP Belt Driven
15-40 HP Direct Drive
40-500 HP
High and Low Pressure
Variable Frequency Drive Designs
Specialty Packaged Systems
Piston Air Compressors
Splash Lube
Pressure Lube
Gas Driven
Compressed Air Accessories
Refrigerated Air Dryers
Desiccant Air Dryers
Air Filters
Condensate Management Systems
Oil Free Systems
Air System Analysis
System Management Solutions
Gear Driven 25-50 HP
Data Logger
Regenerative Dryer
Reciprocating
VFD
M-Series
CDD
Direct Drive 15-40 HP
2. Sullivan-Palatek
1201 W. US Highway 20
Michigan City, IN 46360
PH: (800) 438-6203
FX: (800) 725-6203
info@palatek.com
www.sullivanpalatek.com
D185P3
D185
D375
750-900 CFM
Off Shore
D750P
D1600PH
Electric
Construction
Aftercooler/Dryer
Skid Package
SPB-60
SCH-3
SRD-75
Distributed by
Featuring
Portable Compressors
Manufactured in the U.S.A.
185 cfm to 1800 cfm
John Deere, CAT and Cummins Engines
3 year Air End Warranty
Utility Models
Offshore Models
High Pressure Portable and Skid
950/350 to 1150/350
Instrument Quality Air
375H to 1600H
Skid Mount Aftercoolers
Skid Mount Dryers and Aftercoolers
Electric Construction Compressors
50 to 450 HP
Electronic Parts Orders Through
SmartEquipTM
Full Line of Pneumatic Tools
Hoses and Accessories
“The Ultimate Performance
Rotary Screw Air Compressor”
Manufacturer of Portable Air
Compressors for Construction Use
3.
4. D185 Series
Portable
Compressors
“The Ultimate Performance Rotary Screw Air Compressor”
• All 185 Compressors have Galvaneal Enclosures that protect against
chipping and rust.
• Glow plug engines provide easy starting in all climates.
• The D185P model has galvanized wheel wells and tool boxes for extra
rust protection.
• Pintle eye or 2” ball hitch is available, adjustable height jackstand and
safety chains are standard on all models.
• Two-stage air filters with dry type elements provide separate filtration for
engine and compressor.
Sullivan-Palatek Portable Features:
Model shown: D185 P
5. Dedicated to Quality &
KEEP IT SIMPLE...
KEEP IT CLEAN...
MAKE IT SOLID...
MAKE IT Sullivan!
The Sullivan-Palatek
Compressor
The advantages of owning a
Sullivan-Palatek Rotary Screw
Air Compressor.
Sullivan-Palatek provides low maintenance,
high performance and the most reliable air
ends in the industry.
Our design features our advanced profile
108mm rotary screws for high efficiency.
Reliability, Low Operating Cost
and Longevity.
• Rear panel detaches for external cleaning of coolers.
All units have side by side coolers.
• The Standard D185P model has a 29 gallon steel
fuel tank, galvanized wheel wells and tool boxes,
heavy-duty 15” “ST” rated tires for stability and ease
of towing.
• The P2 & P3 models have 20 gallon plastic fuel
tanks, and tires with 13 inch wheels.
• P2 Model has a containment frame, fork pockets
and external drains.
• Drawbars are made of strong tubular steel with
choice of 3” pintle, or 2” ball hitch.
• Adjustable, swivel screwjack.
• Standard safety chains.
Easy Access
Model shown: D185 P
Quality Built Model shown: D185 P2
P2 and P3
FlexAir
Full length tool box
on each side.
(PJD & PCA models only.)
Sullivan-Palatek manufactures air ends in our
Michigan City plant to ensure complete control over
assembly, quality and testing of all components.
Oversized tapered roller bearings and other design
features add to the quality of every Sullivan-Palatek
machine. We offer a Three Year Unlimited Hour Air
End Warranty on all of our machines.
6. Committed to Support
Alternator warning light
Hour meter
Ignition on/off switch
Fuel gauge
Discharge air pressure gauge
Engine water temp gauge*
Engine oil pressure gauge*
Starting aid light
Start run selector switch
Start bypass button
Start switch
Alternator warning light
Hour meter
Ignition on/off switch
Discharge air pressure gauge
Starting aid light
Load unload selector switch
Bypass button
Start switch
Model D185P JD/CA Model D185 P2 P3
*CAT has warning light only.
P2 FlexAir Machine is built with removable
drawbar and running gear so it can easily be
mounted on a truck bed or any other utility type
vehicle installation.
It has fork lift pockets for lifting and floor mounting,
a full containment frame and external drains for
all fluids. The FlexAir can be a cost effective
replacement for a dedicated purpose built Utility
model compressor.
185 U2
SmartEquip
To place electronic parts
orders, or direct access
to technical information,
visit Sullivan-Palatek’s
home page at:
www.sullivanpalatek.com
and click on SmartEquip
Pneumatic Tools
Available for all Portable
Air Compressors
The standard factory fill in all
our portable compressors.
• Used for all weather
conditions
• Anti-wear & anti-rust
additives
• Anti-foaming additives
• Quick water separation
• Excellent viscosity index
Weather-All Portable
Compressor Fluid
MODEL PSI CFM ENGINE
MANUFACTURER
ENGINE HORSE-
POWER
LENGTH
(inches)
HEIGHT
(inches)
WIDTH
(inches)
WEIGHT
(pounds)
D185 PJD 100 185 JOHN DEERE 49 138.25 63.5 55 2300
D185 PCA 100 185 CATERPILLAR 49 138.25 63.5 55 2230
D185 P2JD 100 185 JOHN DEERE 49 121.81 60.39 55 2000
D185 P2CA 100 185 CATERPILLAR 49 121.81 60.39 55 1910
D185 P3JD 100 185 JOHN DEERE 49 121.92 61.87 55 1980
D185 P3CA 100 185 CATERPILLAR 49 121.92 61.87 55 1890
SPECIFICATIONS
Description, Specifications and Pictures represented in this brochure may vary from actual equipment purchased.
Sullivan-Palatek D185
Model Air Line Lubricator
Option and Hose Reels
Dual hose reels require 75”
A-frame drawbar. (Available for
PJD & PCA models and higher.)
Examples:
• Chippers
• Breakers
• Rivet Busters
• Scalers
• Drills
• Air Lance
APPROX.
SHIPPING
7. Electric Driven Industrial Air Compressors
5-10 HP Belt Driven
15-40 HP Direct Drive
40-400 HP Updraft
High and Low Pressure
Variable Frequency Drive Designs
Specialty Packaged Systems
Piston Air Compressors
Splash Lube
Pressure Lube
Gas Driven
Compressed Air Accessories
Refrigerated Air Dryers
Desiccant Air Dryers
Air Filters
Condensate Management Systems
Oil Free Systems
Air System Analysis
System Management Solutions
Diesel Driven Portable Air Compressors
185 cfm to 1800 cfm
John Deere, Cat and Cummins Engines
3 year Air End Warranty
Utility Models
Offshore Models
High Pressure Portable and Skid
950/350 to 1150/350
Instrument Quality Air
375H to 1600H
Skid Mount Aftercoolers
Skid Mount Dryers and Aftercoolers
Electric Construction Compressors
50 to 400 HP
Electronic Parts Orders Through
SmartEquipTM
Full Line of Pneumatic Tools
Hoses and Accessories
Sullivan-Palatek
1201 W US Hwy 20
Michigan City, IN 46360
Distributed By:
PH: 800-438-6203
FX: 800-725-6203
info@sullivanind.com
www.sullivanpalatek.com
SM RP 8-12 2/M
8.
9.
10. D210-D375 Series
Portable
Compressors
“The Ultimate Performance Rotary Screw Air Compressor”
Sullivan-Palatek Portable Features:
• All 210-375 Compressors have Galvaneal Enclosures that protect
against chipping and rust.
• Galvanized wheel wells and tool boxes for extra rust protection.
• Pintle eye or 2” ball hitch is available, adjustable height jackstand and
safety chains are standard on all models.
• Two-stage air filters with dry type elements provide separate filtration
for engine and compressor.
• Noise level limited to maximum of 76 dBA at 7 meters
Shown with Optional
Pneumatic 3rd Wheel Jack
11. Dedicated to Quality &
KEEP IT SIMPLE...
KEEP IT CLEAN...
MAKE IT SOLID...
MAKE IT Sullivan!
The Sullivan-Palatek
Compressor
The advantages of owning a
Sullivan-Palatek Rotary Screw
Air Compressor.
Sullivan-Palatek provides low maintenance, high
performance and the most reliable air ends
in the industry.
Our design features 108mm in D210 to 250 and
127.5mm in 300 to 375 packages for high efficiency.
Operating costs are significantly reduced because
our compressors can be sized to desired operating
conditions.
Model shown: D250
Galvaneal coated sheet metal
Safety orange powder coat paint
Aluminum hinges
Stainless steel hardware
(Latches, sheet metal,
bolts and nuts)
One piece canopy is
easily removable for
major service
Tool Boxes
SmartEquip
To place electronic parts
orders, or direct access
to technical information,
visit Sullivan-Palatek’s
home page at:
www.sullivanpalatek.com
and click on SmartEquip
Internal tool boxes
are solid steel and
fully galvanized.
Canopy, Hinges and Hardware
Sullivan-Palatek manufactures air ends in our
Michigan City plant to ensure complete control over
assembly, quality and testing of all components.
Tapered roller bearings and other design features
add to the quality of every Sullivan-Palatek machine.
We offer a Three Year Unlimited Hour Air End
Warranty on all of our machines.
12. Committed to Support
Heavy Duty Drawbar
The Drawbars on all our portable
compressors are made of strong
tubular steel and enable easy backing.
Adjustable 3” pintle, or 2” ball hitch.
Adjustable, swivel screwjack.
Standard
safety chains.
Optional
3rd wheel
available.
Hour meter
Fuel gauge with low fuel shutdown
Discharge air pressure gauge
Engine water temp gauge
Engine oil pressure gauge
Full electronic engine diagnostic gauge
Electric system circuit breaker
Start run valve (unloaded starting)
On-Off start switch
Dual high-low pressure switch from
150 to 100 PSI (Tools at 100 line
testing, or blasting 150)
Alternator warning light
Hour Meter
Igniton on/off switch
Fuel gauge
Discharge air pressure
gauge
Start run selector switch
Start bypass button
Start switch
D375 Full Gauge Panel
Pneumatic Tools
Available for all
Portable Air
Compressors
Examples:
• Chippers
• Breakers
• Rivet Busters
• Scalers
• Drills
• Air Lance
The standard factory fill in all
our portable compressors.
• Used for all weather
conditions
• Anti-wear & anti-rust
additives
• Anti-foaming additives
• Quick water separation
• Excellent viscosity index
Weather-All
Portable
Compressor
Fluid
MODEL PSI CFM ENGINE
MANUFACTURER
ENGINE
HORSEPOWER
LENGTH
(inches)
HEIGHT
(inches)
WIDTH
(inches)
WEIGHT
(pounds)
D210 PHJD 150 210 JOHN DEERE 74 138.25 63.5 55 2710
D250 PJD 100 250 JOHN DEERE 74 138.25 63.5 55 2500
D300 PDJD 200 300 JOHN DEERE 140 145.00 62.5 55 3500
D375 PDJD 100-150 375 JOHN DEERE 140 145.00 62.5 55 3340
D375 PDCA 100-150 375 CATERPILLAR 126 145.00 62.5 55 3360
SPECIFICATIONS
Description, Specifications and Pictures represented in this brochure may vary from actual equipment purchased.
Dual Control
Regulators
Switchable dual control regulators
for high (150 psi) and low (100 psi)
Select Advantages 210 250 300 375
Multiple service connections
Exclusive 3 year warranty
Low fuel level shutdown OP OP
Automatic shutdown protection system
Automatic 0 to 100% capacity control
Cooler access panel for cleaning
Containment base
Remote drains
High-low selector switch for dual pressure
Comparison Chart
Air Line Lubricatior
Dual Hose Reel Option
Other options include:
A-Frame drawbar, cold weather
kit and in-line oilers.
210 Gauge Panel
APPROX.
SHIPPING
13. Electric Driven Industrial Air Compressors
5-10 HP Belt Driven
15-40 HP Direct Drive
40-400 HP Updraft
High and Low Pressure
Variable Frequency Drive Designs
Specialty Packaged Systems
Piston Air Compressors
Splash Lube
Pressure Lube
Gas Driven
Compressed Air Accessories
Refrigerated Air Dryers
Desiccant Air Dryers
Air Filters
Condensate Management Systems
Oil Free Systems
Air System Analysis
System Management Solutions
Diesel Driven Portable Air Compressors
185 cfm to 1800 cfm
John Deere, Cat and Cummins Engines
3 year Air End Warranty
Utility Models
Offshore Models
High Pressure Portable and Skid
950/350 to 1150/350
Instrument Quality Air
375H to 1600H
Skid Mount Aftercoolers
Skid Mount Dryers and Aftercoolers
Electric Construction Compressors
50 to 400 HP
Electronic Parts Orders Through
SmartEquipTM
Full Line of Pneumatic Tools
Hoses and Accessories
Sullivan-Palatek
1201 W US Hwy 20
Michigan City, IN 46360
Distributed By:
PH: 800-438-6203
FX: 800-725-6203
info@sullivanind.com
www.sullivanpalatek.com
SM RP 8-12 2/M
14.
15.
16. D750 PHCA/CU, D825 PCA/PCU, D900 PCA/PCU, D900 PHCU
“The Ultimate Performance Rotary Screw Air Compressor”
Sullivan-Palatek Portable Features:
• Automatic zero to 100% capacity control
• Electric brakes, standard
• Automatic shutdown & protection system
• Automatic blowdown valve
• Unloaded starting/closed inlet start
• Noise level limited to maximum of 76 dBA at 7 meters
• Reinforced jack stand
D750 - D900
Portable
Compressors
17. Dedicated to Quality & ..
KEEP IT SIMPLE...
KEEP IT CLEAN...
MAKE IT SOLID...
MAKE IT Sullivan!
The Sullivan-Palatek
Compressor
The advantages of owning a
Sullivan-Palatek Rotary Screw
Air Compressor.
Sullivan-Palatek provides low maintenance,
high performance and the most reliable air ends
in the industry.
Our design features advanced profile 204mm
rotary screws for high efficiency.
Operating costs are significantly reduced
because compressors can be sized to desired
operating conditions.
Sullivan-Palatek manufactured air end ensures
complete control over quality and testing of all
components. Tapered roller bearings add to the
quality of every Sullivan-Palatek machine.
Sullivan-Palatek provides A THREE YEAR,
Unlimited Hour, Air End Warranty, on all machines.
Reliability, Low Operating
Cost and Longevity.
• Corrosion resistant galvaneal steel
enclosure
• Extra large service doors for easy
maintenance
• Aluminized fuel tank resists corrosion
• Heavy-duty chassis & drawbar for
stable towing
• 24 Volt, maintenance free battery
system (2300 to 2800 CCA)
Pneumatic tools available for
all Portable Air Compressors
SmartEquip
To place electronic parts
orders, or direct access
to technical information,
visit Sullivan-Palatek’s
home page at:
www.sullivanpalatek.com
and click on SmartEquip
18. .. Committed to Support
Heavy Duty Drawbar
The Drawbars on all our portable
compressors are made of heavy
duty formed steel.
• Adjustable, swivel screwjack
• Standard safety chains
• Adjustable Lunette Eye
Standard Gauges:
• Fuel gauge, low fuel shutdown
• Air filter maintenance indicators
• Air/Oil separator maintenance indicators
• Tachometer/Hourmeter
• Discharge air pressure
• Compressor air temperature
• Engine oil pressure
• Engine water temperature
• Voltmeter
• Low coolant warning light
Tattletail gauges will quickly pinpoint the
reason for shutdown.
IQ Aftercooler/Filter Option
A modular Aftercooler and filter package
is available in the 750, 825 and 900 CFM
packages. An efficient aftercooler which
will give 15 degree approach temperatures,
coupled with downstream filtration will supply
Instrument Quality air for those applications
where cleaner dryer air is required. Meets ISO
8573.1 : 2001 compressed air quality standards.
IQ Packages are supplied with two outlets,
standard air, IQ Air.
Extra Advantages
• Weather-All compressor oil
• Adjustable height drawbar
• High ambient operation
• 3 stage air filters
• Heavy duty frame
• Heavy duty drawbar
Optional:
• Aftercooler/Filter for IQ Air
• Aftercooler
• Hydraulic Brakes
• Fuel-water separator
• Drains for fuel, engine oil, and
compressor oil
• Full containment base
(Cummins Instrument Panel Shown)
The standard factory fill in all our
portable compressors.
• Used for all weather conditions
• Anti-wear & anti-rust additives
• Anti-foaming additives
• Quick water separation
• Excellent viscosity index
Weather-All
Portable
Compressor Fluid
Pneumatic Tools
Available for
all Portable Air
Compressors
MODEL PSI CFM ENGINE
MANUFACTURER
ENGINE HORSE-
POWER
LENGTH
(inches)
HEIGHT
(inches)
WIDTH
(inches)
WEIGHT
(pounds)
D750 PHCA 150 750 CATERPILLAR 275 199.48 94.50 76.50 8,722
D750 PHCU 150 750 CUMMINS 305 199.48 94.50 76.50 9,020
D825 PCA 125 825 CATERPILLAR 275 199.48 94.50 76.50 8,722
D825 PCU 125 825 CUMMINS 305 199.48 94.50 76.50 9,020
D900 PCA 100 900 CATERPILLAR 275 199.48 94.50 76.50 8,722
D900 PCU 100 900 CUMMINS 305 199.48 94.50 76.50 9,020
D900 PHCU 150 900 CUMMINS 305 199.48 94.50 76.50 9,020
SPECIFICATIONS
Description, Specifications and Pictures represented in this brochure may vary from actual equipment purchased.
CAT engines are available only for export out of the USA
19. Electric Driven Industrial Air Compressors
5-10 HP Belt Driven
15-40 HP Direct Drive
40-400 HP Updraft
High and Low Pressure
Variable Frequency Drive Designs
Specialty Packaged Systems
Piston Air Compressors
Splash Lube
Pressure Lube
Gas Driven
Compressed Air Accessories
Refrigerated Air Dryers
Desiccant Air Dryers
Air Filters
Condensate Management Systems
Oil Free Systems
Air System Analysis
System Management Solutions
Diesel Driven Portable Air Compressors
185 cfm to 1800 cfm
John Deere, Cat and Cummins Engines
3 year Air End Warranty
Utility Models
Offshore Models
High Pressure Portable and Skid
950/350 to 1150/350
Instrument Quality Air
375H to 1600H
Skid Mount Aftercoolers
Skid Mount Dryers and Aftercoolers
Construction Electric Rentals
50 to 400 HP
Electronic Parts Orders Through
SmartEquipTM
Full Line of Pneumatic Tools
Hoses and Accessories
Sullivan-Palatek
1201 W US Hwy 20
Michigan City, IN 46360
Distributed By:
PH: 800-438-6203
FX: 800-725-6203
info@sullivanind.com
www.sullivanpalatek.com
BIG RP 5-12 2/M
20.
21.
22. Sullivan-Palatek Portable Features:
• Automatic zero to 100% capacity control
• Surge brakes, standard
• Automatic shutdown & protection system
• Automatic blowdown valve
• Unloaded starting/closed inlet start
• Noise level limited to maximum of 76 dBA at 7 meters
• Reinforced jack stand
D1300PH CA/CU, D1600P CA/CU, D1600PH CA/CU, D1800P CA/CU
“The Ultimate Performance Rotary Screw Air Compressor”
D1300 - D1800
Portable
Compressors
23. Dedicated to Quality & ..
Sullivan-Palatek
Portable Air
Compressors are
Reliable, Economical
to Operate & Built
in America!
The Sullivan-Palatek
Compressor
The advantages of owning a
Sullivan-Palatek Rotary Screw
Air Compressor.
Sullivan-Palatek provides low maintenance,
high performance and the most reliable air ends
in the industry.
Our design features advanced profile 321mm
rotary screws for high efficiency.
Operating costs are significantly reduced
because compressors can be sized to desired
operating conditions.
Sullivan-Palatek manufactured air end ensures
complete control over quality and testing of all
components. Tapered roller bearings add to the quality
of every Sullivan-Palatek machine.
Sullivan-Palatek provides A THREE YEAR,
Unlimited Hour, Air End Warranty, on all machines.
Reliability, Low Operating
Cost and Longevity.
• Corrosion resistant galvaneel steel
enclosure.
• Extra large service doors for easy
maintenance.
• Aluminized fuel tank resists
corrosion.
• Heavy-duty chassis & drawbar for
stable towing.
• 24 Volt, maintenance free battery
system (2300 to 2800 CCA).
SmartEquip
To place electronic parts
orders, or direct access
to technical information,
visit Sullivan-Palatek’s
home page at:
www.sullivanpalatek.com
and click on SmartEquip
24. .. Committed to Support
Heavy Duty Drawbar
The Drawbars on all our portable
compressors are made of heavy
duty formed steel.
• Adjustable, swivel screwjack.
• Standard safety chains.
• Adjustable Lunette Eye.
IQ Aftercooler Option
A modular Aftercooler and filter package is
available in the 1300, 1600 and 1800 CFM
packages. An efficient aftercooler which will
give 15 degree approach temperatures, coupled
with downstream filtration will supply Instrument
Quality air (.01 PPM) for those applications
where cleaner dryer air is required. Meets ISO
8573 compressed air quality standards.
Extra Advantages
• Weather-All compressor oil
• High ambient operation
• 3 stage air filters
• Heavy duty frame
• Full containment base.
• Heavy duty drawbar
• Drains for fuel, engine oil, and
compressor oil.
Optional:
• Aftercooler/Filter for IQ Air
• Aftercooler
• Fuel-water separator
MODEL PSI CFM ENGINE
MANUFACTURER
ENGINE HORSE-
POWER
LENGTH
(inches)
HEIGHT
(inches)
WIDTH
(inches)
WEIGHT
(pounds)
D1300 PHCA 150 1300 CATERPILLAR 475 273 103 90.5 19,000
D1300 PHCU 150 1300 CUMMINS 485 273 103 90.5 19,000
D1600 PCA 125 1600 CATERPILLAR 475 273 103 90.5 19,000
D1600 PCU 125 1600 CUMMINS 485 273 103 90.5 19,000
D1600 PHCA 150 1600 CATERPILLAR 540 273 103 90.5 19,000
D1600 PHCU 150 1600 CUMMINS 535 273 103 90.5 19,000
D1800 PCA 125 1800 CATERPILLAR 475 273 103 90.5 19,000
D1800 PCU 125 1800 CUMMINS 485 273 103 90.5 19,000
SPECIFICATIONS
Description, Specifications and Pictures represented in this brochure may vary from actual equipment purchased.
CAT engines are available only for export out of the USA
Pneumatic Tools
Available for
all Portable Air
Compressors
The standard factory fill in all our
portable compressors.
• Used for all weather conditions
• Anti-wear & anti-rust additives
• Anti-foaming additives
• Quick water separation
• Excellent viscosity index
Weather-All
Portable
Compressor Fluid
New Standard Gauge Panel:
• Panel light
• Fuel gauge, low fuel shutdown
• Air filter maintenance indicators
• Air/Oil separator maintenance indicators
• Discharge air pressure gauge
• Compressor air/oil temperature gauge
• Low coolant warning light
New Engine Fault Reader quickly
pinpoints reason for shutdown and
monitors engine functions.
25. Electric Driven Industrial Air Compressors
5-10 HP Belt Driven
15-40 HP Direct Drive
40-400 HP Updraft
High and Low Pressure
Variable Frequency Drive Designs
Specialty Packaged Systems
Piston Air Compressors
Splash Lube
Pressure Lube
Gas Driven
Compressed Air Accessories
Refrigerated Air Dryers
Desiccant Air Dryers
Air Filters
Condensate Management Systems
Oil Free Systems
Air System Analysis
System Management Solutions
Diesel Driven Portable Air Compressors
185 cfm to 1800 cfm
John Deere, Cat and Cummins Engines
3 year Air End Warranty
Utility Models
Offshore Models
High Pressure Portable and Skid
950/350 to 1150/350
Instrument Quality Air
375H to 1600H
Skid Mount Aftercoolers
Skid Mount Dryers and Aftercoolers
Electric Construction Compressors
50 to 400 HP
Electronic Parts Orders Through
SmartEquipTM
Full Line of Pneumatic Tools
Hoses and Accessories
Sullivan-Palatek
1201 W US Hwy 20
Michigan City, IN 46360
Distributed By:
PH: 800-438-6203
FX: 800-725-6203
info@sullivanind.com
www.sullivanpalatek.com
LG RP 5-12 1/M
26.
27. Dedicated to Quality.....Committed to Support
• Large, 108 mm Diameter Twin Screw
Air End has Exclusive Three Year unlimited
hour Warranty
• Automatic 0 to 100% Capacity Control
• Two Stage Dry Type Air Filter
• Multiple Service Connections
• Oil Level Sight Glass
• Side by Side Coolers for Compressor and
Engine
• Caterpillar or John Deere Engine
• 20 Gallon Fuel Tank
• Safety Chains
• 13” Wheels & Tires
• Choice of Adjustable Height Lunnette Eye
or Optional Ball Hitch on Drawbar
• Noise Level Limited to Maximum of 76dBA
at 7 Meters
• Gull-Wing Doors for Superior access
to Components and servicing
• Heavy Duty Lifting Eye
• Automatic Shutdown and Protection System
• Automatic Blowdown Valve
• Stop, Turn, Tail Lights
• Unloaded Starting
• Standard Instrumentation
Alternator Light
Discharge Pressure Gauge
Hourmeter
• Space Saving Flip Up Towbar
• For Optional Equipment, Consult Factory
D185P3
Portable Series
Our most popular portable air compressor, the D185 P3 series, is more
compact and lighter weight with the same reliable operating components as
our full size units. Reduced weight saves fuel while towing from site to site.
28. ENGINE
COMPRESSOR
DIMENSIONS
Type Single Stage, oil flooded rotary screw Single Stage, oil flooded rotary screw
Ambient Oper. Temp. Range -20º to +125ºF (-29º to +52ºC) -20º to +125ºF (-29º to +52ºC)
Oil Capacity 5.5 gal. (21 L) 5.5 gal. (21 L)
Total Receiver Volume 1.7 ft. ³ (48 L) 1.7 ft. ³ (48 L)
Air Service Connections Two 3/4” NPT Two 3/4” NPT
Type Cooling System Oil to Air Oil to Air
Type Air Intake System Two Stage Dry Two Stage Dry
Type of Control 0-100% Demand 0-100% Demand
Tire Size 175/80D13 175/80D13
Rated Delivery 185 cfm (5.2 m ³/min) 185 cfm (5.2 m ³/min)
Rated Operating Pressure 100 psig (6.9 Bar) 100 psig (6.9 Bar)
Operating Pressure Range 70-125 psig (4.9-8.6 Bar) 70-125 psig (4.9-8.6 Bar)
Estimated Weight, Serviced 1980 lbs 1890 lbs
D185P3CA
Type Diesel Diesel
Make John Deere CAT
Model 4024TF TIER 4 INT. C2.2T TIER 4 INT
Number of Cylinders 4 4
Bore and Stroke 3.39” x 4.13” (86 x 105mm) 3.3” x 3.9” (84 x 100mm)
Displacement 149 cu. in ³ (2.4 L) 135 in ³ (2.2 L)
Total Oil Capacity 8.5 qts (8 L) 11.2 qts (10.6 L)
Cooling System Capacity 14 qts (13.2 L) 14 qts (13.2 L)
Battery Rating 12 Volts 12 Volts
CCA @ 0ºF 700 Amps 700 Amps
Fuel Tank Capacity 20 gal (75.7 L) 20 gal (75.7 L)
Horsepower @ rated RPM 49 (36.5kw) 49 HP (36.5kw)
Full Load Speed 2650 RPM 2660 RPM
Idle Speed 1650 RPM 1650 RPM
D185P3CA
D185P3JD-D185P3CA 08/12 1M
Specifications subject to change without notice.
D185P3JD
D185P3JD
1201 W. US Highway 20
Michigan City, IN 46360
Tel: 219-874-2497
Tel: 800-438-6203
www.sullivanpalatek.com Email: info@palatek.com
TECHNICAL DATA
29. “The Ultimate Performance
Rotary Screw Air Compressor”
Dedicated to Quality.....Committed to Support
• Large, 108mm (D250) 127mm (D375)
Diameter Twin Screw Air End
• Exclusive Three Year Warranty
• Automatic 0 to 100% Capacity
Control
• Two Stage Dry Type
Air Filter - External Access
• Oil Level Sight Gauge
• Side by Side Coolers for compressor and
engine
• John Deere or Caterpillar TIER III Engines
• Steel Fuel Tank
• Cooler Access Panel for Cleaning
• Safety Chains with Storage
• 15” Wheels & Tires
• Choice of Adjustable Height Lunette Eye or
Optional Ball Hitch on
Drawbar
• Large Full Length Lockable Tool
Boxes on Each Side
• Noise Level Limited to Maximum of 76 dBA
at 7 Meters
• Easily Removable Upper Enclosure
• Galvaneal Enclosure-Rust & Corrosion
Resistant
• Low Fuel Level Shutdown
(D300 & D375’s only)
• Automatic Shutdown and Protection System
• Containment Base (D300-D375 Only)
• Remote Drains (D300-D375 Only)
• Automatic Blowdown Valve
• Stop, Turn, Tail Lights
• Unloaded Starting
Standard Instrumentation
Alternator Light
Fuel Level Gauge
Discharge Pressure Gauge
Hourmeter
Engine Oil Pressure Gauge*
Engine Water Temperature Gauge*
• High-Low Selector Switch for
Dual Pressure (D375’s only)
• Optional Equipment
Instrument Quality Air
Low approach temperature aftercooler
Water Separator/Trap
Primary & Secondary Filtration to 0.01 micron
Hose Reels
Gauges
Tachometer
PLUS MANY OTHERS
D250PJD D300PDHHJD D375PDCA D375PDJD
*Warning Light Used on CAT Powered Units
30. ENGINE
COMPRESSOR
SPECIFICATIONS
DIMENSIONS
Type Single Stage, oil flooded rotary screw Single Stage, oil flooded rotary screw Single Stage, oil flooded rotary screw Single Stage, oil flooded rotary screw
Ambient Oper. Temp. Range -20º to +125ºF (-29º to +52ºC) -20º to +125ºF (-29º to +52ºC) -20º to +125ºF (-29º to +52ºC) -20º to +125ºF (-29º to +52ºC)
Oil Capacity 5.5 gal. (21 L) 10 gal. (38 L) 10 gal. (38 L) 10 gal. (38 L)
Total Receiver Volume 1.7 ft. ³ (48 L) 3.6 ft. ³ (102 L) 3.6 ft. ³ (102 L) 3.6 ft. ³ (102 L)
Air Service Connections Two 3/4” NPT One 1 1/2” NPT/Two 3/4” NPT One 1 1/2” NPT/Two 3/4” NPT One 1 1/2” NPT/Two 3/4” NPT
Type Cooling System Oil to Air Oil to Air Oil to Air Oil to Air
Type Air Intake System Two Stage Dry Two Stage Dry Two Stage Dry Two Stage Dry
Type of Control 0-100% Demand 0-100% Demand 0-100% Demand 0-100% Demand
Tire Size ST 205/75D15 Hwy Tubeless ST 205/75D15 Hwy Tubeless ST 205/75D15 Hwy Tubeless ST 205/75D15 Hwy Tubeless
Rated Delivery 250 cfm (7.1 m ³/min) 300 cfm (8.49 m ³/min) 375 cfm (10.6 m ³/min) 375 cfm (10.6 m ³/min)
Rated Operating Pressure 100 psig (700 kPa) 200 psig (1379 kPa) 150 psig (1034k Pa) 150 psig (1034k Pa)
Operating Pressure Range 70-125 psig (480-860 kPa) 70-200 psig (480-1379 kPa) 70-165 psig (480-1138 kPa) 70-165 psig (480-1138 kPa)
Estimated Weight, Serviced 2507 lbs 3400 lbs 3400 lbs 3395 lbs
D250PJD D300PDHHJD
D300PDHHJDD250PJD
(Metric in Parentheses)
Specifications subject to change without notice
D250 D300 D375
H 58.5 62.5 62.5
(1486) (1588) (1588)
L ¹ 88.25 96 96
(2242) (2438) (2438)
L ² 138.25 145 145
(3512) (3708) (3708)
(Metric in Parentheses) L ¹
L ²
Exhaust
Adj.
15 to 19
(381) (483)
50
(1270)
Jack Stand
17
(432)
Lifting
Eye
55
(1397)
H
46.5
(1181)
Towing
Eye
SP250-300-375SPEC-RP 1/12 2M
D375PDJD
Type Diesel Diesel Diesel Diesel
Make JOHN DEERE JOHN DEERE JOHN DEERE CATERPILLAR
Model 4045TF290 IT4 4045HF285 IT4 4045HF285 IT4 C4.4T (TIER III)
Number of Cylinders 4 4 4 4
Bore and Stroke 4.19” x 5.00” (106 x 127mm) 4.19” x 5” (106 x 127mm) 4.19” x 5” (106 x 127mm) 4.1” X 5” (105 X 12mm)
Displacement 276 in ³ (4.5 L) 276 in ³ (4.5 L) 276 in ³ (4.5 L) 268 in ³ (4.4 L)
Total Oil Capacity 9 qts (8.5 L) 14 qts (13.2 L) 14 qts (13.2 L) 8 qts. (7.57 L)
Cooling System Capacity 14 qts (13.2 L) 16 qts. (15.1 L) 16 qts (15.1 L) 16 qts. (15.1 L)
Battery Rating 12 Volts 12 Volts 12 Volts 12 Volts
CCA @ 0ºF 700 Amps 900 Amps 900 Amps 900 Amps
Idle Speed 1650 RPM 1650 RPM 1650 RPM 1650 RPM
Fuel Tank Capacity 29 gal (109.8 L) 40 gal. (151 L) 40 gal (151 L) 40 gal. (151 L)
Horsepower @ rated RPM 74 HP 140 HP 140 HP 126 HP
Full Load Speed 2400 RPM 2300 RPM 2500 RPM 2500 RPM
D375PDJD
1201 US Highway 20 West TEL: 219-874-2497 FAX: 219-872-5043 www.sullivanpalatek.com
Michigan City, IN 46360 TEL: 800-438-6203 FAX: 800-725-6203 info@sullivanind.com
D375PDCA
D375PDCA
31. Dedicated to Quality & Committed to Support
D375Q7JDC
EXPORT Portable
Compressors
• Large, 127mm Diameter Air End
• Exclusive Three Year Warranty on Air End
• Automatic 0 to 100% Capacity Control
• Dry Air Filters
• Oil Level Sight Gauge
• Side by Side Coolers
• Cooler Access Panel
• John Deere 4025TF250 Tier 1 Engine
• Steel Fuel Tank
• 15” Wheels
• Safety Chains
• Choice of Lunnette Eye or Ball Hitch on
Height Adjustable Drawbar
• Large Full Length Tool Boxes in Each Side
with Lockable Handles
• Easily Removable Upper Enclosure
• Access Panel in Roof for Separator Service
• Noise Level Limited to Maximum of 76 dBA
at 7 Meters
• Galvaneal Enclosure-Rust & Corrosion Resistant
• Low Fuel Level Shutdown
• Stop, Turn, Tail Lights
• Automatic Blowdown Valve
• Unloaded Starting
• Automatic Shutdown and Protection System
High Compressor Temperature
Low Engine Oil Pressure
High Engine Temperature
Standard Instrumentation
Alternator Light
Fuel Level Gauge
Discharge Pressure Gauge
Hourmeter
Start Run Valve
Fuse
Ignition Start Switch
Bypass for Engine Oil Pressure
• Optional Equipment
Racor Type Fuel Filters
Hose Reels
Third Wheel
Factory Fill - Weather-All Compressor Fluid
32. ENGINE
COMPRESSOR
DIMENSIONS
D375Q7 HM 1/13 1M
Specifications subject to change without notice.
1201 W. US Highway 20
Michigan City, IN 46360
Tel: 219-874-2497
Tel: 800-438-6203
www.sullivanpalatek.com Email: info@palatek.com
TECHNICAL DATA
Type Single Stage, Oil Flooded Rotary Screw
Ambient Oper. Temp. Range -20º to +125ºF (-29º to +52ºC)
Oil Capacity 10 gal. (38 L)
Total Receiver Volume 3.6 ft. ³ (102 L)
Air Service Connections One 1 1/2” NPT/Two 3/4” NPT
Type Cooling System Oil to Air
Type Air Intake System Two Stage Dry
Type of Control 0-100% Demand
Rated Delivery 375 cfm (10.6 m ³/min)
Rated Operating Pressure 100 psig (7 Bar)
Operating Pressure Range 70-125 psig (4.8 - 8.6 Bar)
Estimated Weight, Serviced 3400 lbs
D375Q7 JDA
Type Diesel
Make JOHN DEERE
Model 4045TF250 Tier 1
Number of Cylinders 4
Bore and Stroke 4.19” x 5.00” (106 x 127 mm)
Displacement 276 in ³ (4.5 L)
Total Oil Capacity 14 qts. (13.25 L)
Cooling System Capacity 16 qts (15.1 L)
Battery Rating 12 Volts
CCA @ 0ºF 850 Amps
Idle Speed 1650 RPM
Fuel Tank Capacity 40 gal (151 L)
Horsepower @ rated RPM 125 HP (93 kw)
Full Load Speed 2500 RPM
D375Q7 JDA
33. “The Ultimate Performance
Rotary Screw Air Compressor”
Dedicated to Quality.....Committed to Support
• Large 204mm Diameter Twin Screw
Air End Manufactured In The USA by
Sullivan-Palatek
• Exclusive Three Year Warranty
• Automatic 0 to 100% Capacity
Control
• 2” Service Connection
• Oil Level Sight Gauge
• Caterpillar or Cummins Engine
• Aluminized Fuel Tanks
• Ether Starting Aid
• Single Point Lifting Bail
• Dual-Axle Running Gear
• Adjustable 3” Lunette Eye
• Noise Level Limited to Maximum of
76 dBA at 7 Meters
• Automatic Shutdown and Protection
System
• Electric or hydraulic surge brakes
• Galvaneal sheet metal
• Automatic Blowdown Valve
• Large Service Doors for ease of Maintenance
• Standard Instrumentation
Fuel Level Gauge, low fuel shutdown
Air Filter Maintenance Indicators
Air/Oil Separator Maintenance Indicators
Tachometer/Hourmeter
Discharge Pressure Gauge
Compressor Temperature Gauge
Engine Oil Pressure Light - CAT Only
Engine Water Temperature Light - CAT only
Voltmeter
Low Coolant Warning Light
• Options
Built in Aftercooler, Filters
Hydraulic Brakes
Dual Air Outlets
Containment Base
More Options Available
Sullivan-Palatek Portable Compressors
Sizes 750 to 900 CFM - Pressures 90 to 150 PSI
Caterpillar or Cummins Engines
FEATURES
34. Specifications
Dimensions & Specifications subject to change without notice
Dimensions
(Metric in Parentheses)
SP750-900SPEC-RP 08/11 2M
1201 US Highway 20 West TEL: 219-874-2497 FAX: 219-872-5043 www.sullivanpalatek.com
Michigan City, IN 46360 TEL: 800-438-6203 FAX: 800-725-6203 info@sullivanind.com
CATERPILLAR (All CA Models) CUMMINS (All CU Models)
COMPRESSOR SPECS
Type Single Stage, oil flooded rotary screw
Ambient Oper. Temp. Range -20º to +125ºF (-29º to +52ºC)
Oil Capacity 30 gal. (114 L)
Total Receiver Volume 11.5 ft. ³ (362 L)
Air Service Connections 2” NPT
Type Cooling System Oil to Air
Type Air Intake System Three Stage Dry
Type of Control 0-100% Demand
Tire Size 14.5-6HP 14 Ply Rating
Operating Pressure Range 70-150 psig (4.9-10.3 bar)
Estimated Weight, Serviced 9000 lbs
ENGINE SPECS
Type Diesel
Make CATERPILLAR or CUMMINS
Number of Cylinders 6
Cooling System Capacity 10.5 gal. (40 L)
Battery Rating 24 Volts
CCA @ 0ºF 1150 Amps per Battery (2)
Idle Speed 1400 RPM
Fuel Tank Capacity 150 gal (568 L)
COMPRESSORS
CATERPILLAR
Model Rated Delivery Rated Operating Pressure
D750PHCA 750 cfm (21.2 m ³/min) 150 psig (10.3 Bar)
D825PCA 825 cfm (23.3 m ³/min) 70-125 psig (4.9-8.6 Bar)
D900PCA 900 cfm (26.4 m ³/min) 100 psig (7 Bar)
CUMMINS
D750PHCU 750 cfm (21.2 m ³/min) 150 psig (10.3 Bar)
D825PCU 825 cfm (23.3 m ³/min) 70-125 psig (4.9-8.6 Bar)
D900PCU 900 cfm (26.4 m ³/min) 100 psig (7 Bar)
D900PHCU 900 cfm (26.4 m ³/min) 150 psig (10.3 Bar)
ENGINES
Model Bore & Stroke Displacement
Total Oil
Capacity
HP @ rated
RPM
Full Load
Speed
CATERPILLAR
D750PHCA C7 ACERT 4.33” x 5.0” (110 x 127mm) 442 cu. In. (7.2L) 7.5 gal. (28 L) 275 HP 1900 RPM
D825PCA C7 ACERT 4.33” x 5.0” (110 x 127mm) 442 cu. In. (7.2L) 7.5 gal. (28 L) 275 HP 2000 RPM
D900PCA C7 ACERT 4.33” x 5.0” (110 x 127mm) 442 cu. In. (7.2L) 7.5 gal. (28 L) 275 HP 2200 RPM
CUMMINS
D750PHCU QSC 8.3 4.49" x 5.31" (114 x 135 mm) 506 cu. In. (8.3 L) 7.3 gal. (27.5 L) 305 HP 1900 RPM
D825PCU QSC 8.3 4.49" x 5.31" (114 x 135 mm) 506 cu. In. (8.3 L) 7.3 gal. (27.5 L) 275 HP 2000 RPM
D900PCU QSC 8.3 4.49" x 5.31" (114 x 135 mm) 506 cu. In. (8.3 L) 7.3 gal. (27.5 L) 305 HP 2200 RPM
D900PHCU QSC 8.3 4.49” x 5.31” (114 x 135 mm) 506 cu. In. (8.3 L) 7.3 gal. (27.5 L) 305 HP 2200 RPM
35. “The Ultimate Performance
Rotary Screw Air Compressor”
Dedicated to Quality.....Committed to Support
• Large 321mm Diameter Twin Screw Air End
Manufactured by Sullivan-Palatek
• Exclusive Three Year Warranty
• Automatic 0 to 100% Capacity
Control
• 8” Closed Start, Inlet Valve
• One 3” Service Connection
• Oil Level Sight Gauge
• Caterpillar or Cummins Engine
• Steel Fuel Tank
• Ether Starting Aid
• Single Point Lifting Bail
• Tri-Axle Running Gear
• Adjustable 3” Lunnette Eye
• Noise Level Limited to Maximum of
76 dBA at 7 Meters
• Automatic Shutdown and Protection System
• Direct Drive-No Gears
• Containment Base
• Large Service Doors for Easy Maintenance
• Automatic Blowdown Valve
• Dual Air Outlets (with Aftercooler option)
• Standard Instrumentation
Air Filter Maintenance Indicator
Air/Oil Separator Maintenance Indicator
Tachometer/Hourmeter
Engine Oil Pressure Gauge
Engine Water Temperature Gauge
Fuel Level Gauge, low fuel shutdown
Voltmeter
Compressor Discharge Temperature Gauge
Compressor Discharge Air Pressure Gauge
Low Coolant Warning Light
• Options
Built in Aftercooler and Filters
PLUS MANY MORE
Sullivan-Palatek Portable Compressors
Sizes 1300, 1600 and 1800 CFM
FEATURES
36. Dimensions & Specifications subject to change without notice
SP1300-1800SPEC-RP 08/12 1M
1201 US Highway 20 West TEL: 219-874-2497 FAX: 219-872-5043 www.sullivanpalatek.com
Michigan City, IN 46360 TEL: 800-438-6203 FAX: 800-725-6203 info@sullivanind.com
COMPRESSOR SPECS
CATERPILLAR (All CA Models) CUMMINS (All CU Models)
Type Single Stage, oil flooded rotary screw
Ambient Oper. Temp. Range -20º to +125ºF (-29º to +52ºC)
Oil Capacity 55 gal. (208 L)
Total Receiver Volume 21 ft. ³ (595 L)
Air Service Connections 3” NPT
Type Cooling System Oil to Air
Type Air Intake System Two Stage Dry
Type of Control 0-100% Demand
Tire Size 8-14.5
Operating Pressure Range 70-150 psig (4.9 - 10.3 Bar)
Estimated Weight, Serviced 19000 lbs
ENGINE SPECS
CATERPILLAR CUMMINS
Type Diesel Diesel
Number of Cylinders 6 6
Bore and Stroke 5.4” x 6.75” (137 x 171mm) 5.4” x 6.7” (137 x 169mm)
Displacement 928 in ³ (15.2 L) 915 in ³ (15 L)
Total Oil Capacity 8.75 gal. (33 L) 12 gal. (45.41 L)
Cooling System Capacity 18.5 gal. (70 L) 18.5 gal. (70 L)
Battery Rating 24 Volts 24 Volts
CCA @ 0ºF 1400 Amps per Battery 1400 Amps per Battery
Idle Speed 1400 RPM 1400 RPM
Fuel Tank Capacity 200 gal (757 L) 200 gal. (757 L)
COMPRESSORS ENGINES
Rated Delivery Rated Operating Pressure Model
HP @ Rated
RPM
Full Load
Speed
CATERPILLAR
D1300PHCA 1300 cfm (37 m ³/min) 150 psig (10.3 Bar) C15 ACERT 475 HP 1800 RPM
D1600PCA 1600 cfm (45 m ³/min) 125 psig (8.6 Bar) C15 ACERT 475 HP 1900 RPM
D1600PHCA 1600 cfm (45 m ³/min) 150 psig (10.3 Bar) C15 ACERT 540 HP 2000 RPM
D1800PCA 1800 cfm (51 m ³/min) 100 psig (8.6 Bar) C15 ACERT 475 HP 2100 RPM
CUMMINS
D1300PHCU 1300 cfm (37 m ³/min) 150 psig (10.3 Bar) QSX15 485 HP 1800 RPM
D1600PCU 1600 cfm (45 m ³/min) 125 psig (8.6 Bar) QSX15 485 HP 1900 RPM
D1600PHCU 1600 cfm (45 m ³/min) 150 psig (10.3 Bar) QSX15 535 HP 2000 RPM
D1800PCU 1800 cfm (51 m ³/min) 100 psig (6.9 Bar) QSX15 485 HP 2100 RPM
D1800PMCU 1800 cfm (51 m ³/min) 125 psig (8.6 Bar) QSX15 535 HP 2100 RPM
(Metric in Parentheses)
SPECIFICATIONS
DIMENSIONS
37. Dedicated to Quality & Committed to Support
D950-D1150
High Pressure
Two Stage
FEATURES
• Automatic 0 to 100% Capacity
• One 3” Service Connection
• Oil Level Sight Gauge
• Cummins QSX15 or Caterpillar C-15 ACERT
• Steel Fuel Tanks
• Ether Starting Aid
• Single Point Lifting Bail
• Tri-Axle Running Gear for Towing Up to
55 MPH
• Noise Level Limited to Maximum of 76
dBA at 7 Meters
• Automatic Shutdown and Protection System
• Automatic Blowdown Valve
• Unloaded warm up
• Adjustable 3” Lunette Eye
• Six Large Service Doors for Ease of
Maintenance
STANDARD INSTRUMENTATION
Air Filter Maintenance Indicator
Air/Oil Separator Maintenance Indicator
Tachometer/Hourmeter
Engine Oil Pressure Gauge
Engine Water Temperature Gauge
Fuel Level Gauge
Voltmeter
Compressor Discharge Temperature Gauge
Compressor Discharge Air Pressure Gauge
Low Coolant Warning Light
OPTIONS
• Aftercooler with Separator Trap & Filter
• Variable Pitch Fan
• Low Oil Level Make-up System
• Cold Weather Control System Heater
D950PVHCA-CU, D1150PVHCA-CU
38. 1201 W. US Highway 20
Michigan City, IN 46360
Tel: 219-874-2497
Tel: 800-438-6203
www.sullivanpalatek.com Email: info@palatek.com
TECHNICAL DATA
SPECIFICATIONS
Dimensions & Specifications subject to change without notice
DIMENSIONS
(Metric in Parentheses)
950-1150 SPEC-HM 06/13 2M
COMPRESSORS D950PVHCA D950PVHCU D1150PVHCA D1150PVHCU
Type Two Stage, oil flooded
rotary screw
Two Stage, oil flooded
rotary screw
Two Stage, oil flooded
rotary screw
Two Stage, oil flooded
rotary screw
Ambient Oper. Temp.
Range
-20º to +125ºF (-29º to
+52ºC)
-20º to +125ºF (-29º to
+52ºC)
-20º to +125ºF (-29º to
+52ºC)
-20º to +125ºF (-29º to
+52ºC)
Oil Capacity 55 gal. (208 L) 55 gal. (208 L) 55 gal. (208 L) 55 gal. (208 L)
Total Receiver Volume 19.4 ft. ³ (549 L) 19.4 ft. ³ (549 L) 19.4 ft. ³ (549 L) 19.4 ft. ³ (549 L)
Air Service Connections One 3” NPT One 3” NPT One 3” NPT One 3” NPT
Type Cooling System Oil to Air Oil to Air Oil to Air Oil to Air
Type Air Intake System Two Stage Dry Two Stage Dry Two Stage Dry Two Stage Dry
Type of Control 0-100% Demand 0-100% Demand 0-100% Demand 0-100% Demand
Tire Size 8-14.5 8-14.5 8-14.5 8-14.5
Rated Delivery 950 cfm (26.9 m ³/min) 950 cfm (26.9 m ³/min) 1150 cfm (32.6 m ³/min) 1150 cfm (32.6 m ³/min)
Rated Operating Pressure 350 psig (24.13 BAR) 350 psig (24.13 BAR) 350 psig (24.13 BAR) 350 psig (24.13 BAR)
Operating Pressure Range 250-350 psig (17.2-24.1
BAR)
250-350 psig (17.2-24.1
BAR)
250-350 psig (17.2-24.1
BAR)
250-350 psig (17.2-24.1
BAR)
Estimated Weight, Serviced 17500 lbs (7938 kg) 17500 lbs (7938 kg) 17500 lbs (7938 kg) 17500 lbs (7938 kg)
ENGINES D950PVHCA D950PVHCU D1150PVHCA D1150PVHCU
Type Diesel Diesel Diesel Diesel
Make CATERPILLAR CUMMINS CATERPILLAR CUMMINS
Model C15 ACERT QSX15 C15 ACERT QSX15
Number of Cylinders 6 6 6 6
Bore and Stroke 5.4” x 6.75” (137 x
171mm)
5.4" X 6.7" (137mm x
169mm)
5.4” x 6.75” (137 x
171mm)
5.4" X 6.7" (137mm x
169mm)
Displacement 928 cu. In. (15.2 L) 915 cu. In. (15L) 928 cu. In. (15.2 L) 915 cu. In. (15 L)
Total Oil Capacity 8.75 gal. (33 L) 12 gal. (45.41L) 8.75 gal. (33 L) 12 gal. (45.41L)
Cooling System Capacity 18.5 gal (70 L) 18.5 gal (70L) 18.5 gal (70 L) 18.5 gal (70L)
Battery Rating 24 Volts 24 Volts 24 Volts 24 Volts
CCA @ 0ºF 1400 Amps per
Battery (2)
1400 Amps per
Battery (2)
1400 Amps per
Battery (2)
1400 Amps per
Battery (2)
Idle Speed 1400 RPM 1400 RPM 1400 RPM 1400 RPM
Fuel Tank Capacity 200 gal (757 L) 200 gal (757 L) 200 gal (757 L) 200 gal (757 L)
Horsepower @ rated RPM 475 HP 485 HP 540 HP (403 kw) 535 HP
Full Load Speed 1900RPM 1900 RPM 1800 RPM 1800 RPM
39. Dedicated to Quality & Committed to Support
D300-D375 Off Shore
Portable
Compressors
• 127mm (D375) Diameter Twin Screw Air End
• Exclusive Three Year Warranty on Air End
• Automatic 0 to 100% Capacity Control
• Two Stage Dry Type Air Filter
• Oil Level Sight Gauge
• Side by Side Coolers for Compressor and Engine
• John Deere or Caterpillar TIER III Engines
• Steel Fuel Tank
• Cooler Access Panel for Cleaning
• Large Full Length Tool Boxes in Each Side
with Lockable Handles
• Noise Level Limited to Maximum of 76 dBA
at 7 Meters
• Removable Upper Enclosure
• Galvaneal Enclosure-Rust & Corrosion Resistant
• Low Fuel Level Shutdown
• Automatic Shutdown and Protection System
• Containment Base
• Remote Drains
• Automatic Blowdown Valve
• Unloaded Starting
• Chalwyn Valve with Emergency Pull Handle
• Heavy Duty Fuel/Water Separator
• Line Backer Protection
• Pull Tested Galvanized Skid with Four Point Lift
• Spark Arrester Mufflers
Standard Instrumentation
Alternator Light
Fuel Level Gauge
Discharge Pressure Gauge
Hourmeter
Engine Oil Pressure Gauge*
Engine Water Temperature Gauge*
• High-Low Selector Switch for Dual Pressure
(D375’s only)
Optional Equipment
Instrument Quality Air
Aftercooler
Water Separator/Trap
Discharge Air Filtration to 0.01 micron
Tachometer
PLUS MANY OTHERS
*Warning Light Used on CAT Powered Units
Off Shore Features:
40. ENGINE
COMPRESSOR
DIMENSIONS
OS D300-D375 FP 9/13 1M
Specifications subject to change without notice.
1201 W. US Highway 20
Michigan City, IN 46360
Tel: 219-874-2497
Tel: 800-438-6203
www.sullivanpalatek.com Email: info@palatek.com
TECHNICAL DATA
Type Single Stage, Oil Flooded
Rotary Screw
Single Stage, Oil Flooded
Rotary Screw
Single Stage, Oil Flooded
Rotary Screw
Ambient Oper. Temp. Range -20º to +125ºF (-29º to +52ºC) -20º to +125ºF (-29º to +52ºC) -20º to +125ºF (-29º to +52ºC)
Oil Capacity 10 gal. (38 L) 10 gal. (38 L) 10 gal. (38 L)
Total Receiver Volume 3.6 ft. ³ (102 L) 3.6 ft. ³ (102 L) 3.6 ft. ³ (102 L)
Air Service Connections One 1 1/2” NPT/Two 3/4” NPT One 1 1/2” NPT/Two 3/4” NPT One 1 1/2” NPT/Two 3/4” NPT
Type Cooling System Oil to Air Oil to Air Oil to Air
Type Air Intake System Two Stage Dry Two Stage Dry Two Stage Dry
Type of Control 0-100% Demand 0-100% Demand 0-100% Demand
Rated Delivery 300 cfm (8.5 m ³/min) 375 cfm (10.6 m ³/min) 375 cfm (10.6 m ³/min)
Rated Operating Pressure 200 psig (13.79 Bar) 150 psig (10.34 Bar) 150 psig (10.34 Bar)
Operating Pressure Range 70-200 psig (4.8-13.79 Bar) 70-165 psig (4.8-11.38Bar) 70-165 psig (4.8-11.38 Bar)
Estimated Weight, Serviced 5800 Lbs 5800 Lbs 5800 Lbs
D300SDHHJD D375SDJD D375SDCA
D300SDHHJD
Type Diesel Diesel Diesel
Make JOHN DEERE JOHN DEERE CATERPILLAR
Model 4045HF285 (TIER 3) 4045HF285 (TIER 3) C4.4T (TIER 3)
Number of Cylinders 4 4 4
Bore and Stroke 4.19” x 5” (106 x 127mm) 4.19” x 5” (106 x 127mm) 4.1” X 5” (105 X 127mm)
Displacement 275 in ³ (4.5 L) 275 in ³ (4.5 L) 268 in ³ (8.0 L)
Total Oil Capacity 15.53 qts (14.7 L) 15.53 qts (14.7 L) 8.5 qts. (2.25 L)
Cooling System Capacity 16 qts. (15.1 L) 16 qts (15.1 L) 16 qts. (15.1 L)
Battery Rating 12 Volts 12 Volts 12 Volts
CCA @ 0ºF 1000 Amps 1000 Amps 850 Amps
Idle Speed 1650 RPM 1650 RPM 1650 RPM
Fuel Tank Capacity 40 gal. (151 L) 40 gal (151 L) 40 gal. (151 L)
Horsepower @ rated RPM 140 HP 140 HP 126 HP
Full Load Speed 2300 RPM 2475 RPM 2475 RPM
D375SDJD D375SDCA
41. Dedicated to Quality & Committed to Support
• Large 204mm Diameter Twin Screw Air End
Manufactured In The USA by Sullivan-Palatek
• Exclusive Three Year Warranty On Air End
• Automatic 0 to 100% Capacity Control
• 2” Service Connection
• Oil Level Sight Gauge
• Caterpillar or Cummins Engine
• Noise Level Limited to Maximum of 76 dBA
at 7 Meters
• Automatic Shutdown and Protection System
• Block Heater (Standard with Cummins Engine,
Option with CAT Engine)
• Automatic Blowdown Valve
• Large Service Doors for ease of Maintenance
• IQ Package (Optional)
• Enclosure Fabricated from Galvaneal and
Powder Coated to Provide Maximum
Corrosion Protection
• Environmentally Friendly Containment Base
Fabricated from Steel and Galvanized for
Maximum Corrosion Protection
• Galvanized Railings to Protect Machine in
Close Quarters
• Aluminized Fuel Tanks
• Chalwyn Valve with Emergency Pull Handle
• Heavy Duty Fuel/Water Separator
• Line Backer Protection
• Pull Tested Galvanized Skid with Four Point
Lift
• Spark Arrester Mufflers
D750-D900
Off Shore
Portable Series
Off Shore Features:
• Standard Instrumentation
• Fuel Level Gauge, Low Fuel Shutdown
• Air Filter Maintenance Indicators
• Air/Oil Separator Maintenance Indicators
• Tachometer/Hourmeter
• Discharge Pressure Gauge
• Compressor Temperature Gauge
• Engine Oil Pressure Light - CAT Only
• Engine Water Temperature Light - CAT only
• Voltmeter
• Low Coolant Warning Light
42. 1201 W. US Highway 20
Michigan City, IN 46360
Tel: 219-874-2497
Tel: 800-438-6203
www.sullivanpalatek.com Email: info@palatek.com
TECHNICAL DATA
SPECIFICATIONS
Dimensions & Specifications subject to change without notice
DIMENSIONS
(Metric in Parentheses)
OS D750-900-SPEC-FP 9/13 1M
CATERPILLAR (All CA Models) CUMMINS (All CU Models)
COMPRESSOR SPECS
Type Single Stage, oil flooded rotary screw
Ambient Oper. Temp. Range -20º to +125ºF (-29º to +52ºC)
Oil Capacity 30 gal. (114 L)
Total Receiver Volume 11.5 ft. ³ (362 L)
Air Service Connections 2” NPT
Type Cooling System Oil to Air
Type Air Intake System Three Stage Dry
Type of Control 0-100% Demand
Operating Pressure Range 70-150 psig (4.9-10.3 bar)
Estimated Weight, Serviced 13,000 Lbs.
ENGINE SPECS
Type Diesel
Make CATERPILLAR or CUMMINS
Number of Cylinders 6
Cooling System Capacity 10.5 gal. (40 L)
Battery Rating 24 Volts
CCA @ 0ºF 1050 Amps per Battery (2)
Idle Speed 1400 RPM
Fuel Tank Capacity 159 gal (602 L)
COMPRESSORS
CATERPILLAR
Model Rated Delivery Rated Operating Pressure
D750SH3CA 750 cfm (21.2 m ³/min) 150 psig (10.3 Bar)
D825S3CA 825 cfm (23.3 m ³/min) 125 psig (8.6 Bar)
D900S3CA 900 cfm (26.4 m ³/min) 100 psig (7 Bar)
CUMMINS
D750SH3CU 750 cfm (21.2 m ³/min) 150 psig (10.3 Bar)
D825S3CU 825 cfm (23.3 m ³/min) 125 psig (8.6 Bar)
D900S3CU 900 cfm (26.4 m ³/min) 100 psig (7 Bar)
D900SH3CU 900 cfm (26.4 m ³/min) 150 psig (10.3 Bar)
ENGINES
Model Bore & Stroke Displacement
Total Oil
Capacity
HP @
rated
RPM
Full Load
Speed
CATERPILLAR
D750SHCA C7 ACERT 4.33” x 5.0” (110 x 127mm) 442 cu. In. (7.2L) 7.5 gal. (28 L) 275 HP 1800 RPM
D825SCA C7 ACERT 4.33” x 5.0” (110 x 127mm) 442 cu. In. (7.2L) 7.5 gal. (28 L) 275 HP 1900 RPM
D900SCA C7 ACERT 4.33” x 5.0” (110 x 127mm) 442 cu. In. (7.2L) 7.5 gal. (28 L) 275 HP 1900 RPM
CUMMINS
D750SHCU QSC 8.3 4.49" x 5.31" (114 x 135 mm) 506 cu. In. (8.3 L) 5.25 gal. (19.9 L) 305 HP 1800 RPM
D825SCU QSC 8.3 4.49" x 5.31" (114 x 135 mm) 506 cu. In. (8.3 L) 5.25 gal. (19.9 L) 305 HP 1900 RPM
D900SCU QSC 8.3 4.49" x 5.31" (114 x 135 mm) 506 cu. In. (8.3 L) 5.25 gal. (19.9 L) 305 HP 1900 RPM
D900SHCU QSC 8.3 4.49” x 5.31” (114 x 135 mm) 506 cu. In. (8.3 L) 5.25 gal. (19.9 L) 305 HP 1900 RPM
43. Dedicated to Quality & Committed to Support
D1300-D1800
Off Shore
Portable Series
Off Shore Features:
• Air End Manufactured by Sullivan-Palatek
• Exclusive Three Year Warranty On Air End
• Automatic 0 to 100% Capacity
Control
• 10” Closed Start, Pneumatic Valve
• One 3” Service Connection
• Oil Level Sight Gauge
• Caterpillar or Cummins Engine
• Noise Level Limited to Maximum of
76 dBA at 7 Meters
• Automatic Shutdown and Protection System
• Direct Drive-No Gears
• Aluminized Fuel Tanks
• IQ Package (Optional)
• Enclosure Fabricated from Galvaneal and
Powder Coated to Provide Maximum
Corrosion Protection
• Environmentally Friendly Containment
Base Fabricated from Steel and Galvanized
for Maximum Corrosion Protection
• Galvanized Railings to Protect Machine in
Close Quarters
• Chalwyn Valve with Emergency Pull
Handle
• Heavy Duty Fuel/Water Separator
• Line Backer Protection
• Pull Tested Galvanized Skid with Four
Point Lift
• Spark Arrestor Mufflers
44. 1201 W. US Highway 20
Michigan City, IN 46360
Tel: 219-874-2497
Tel: 800-438-6203
www.sullivanpalatek.com Email: info@palatek.com
TECHNICAL DATA
SPECIFICATIONS
Dimensions & Specifications subject to change without notice
DIMENSIONS
(Metric in Parentheses)
OS 1300-1800 FP 09/13 1M
COMPRESSOR SPECS
CATERPILLAR (All CA Models) CUMMINS (All CU Models)
Type Single Stage, oil flooded rotary screw
Ambient Oper. Temp. Range -20º to +125ºF (-29º to +52ºC)
Oil Capacity 55 gal. (208 L)
Total Receiver Volume 21 ft. ³ (595 L)
Air Service Connections 3” NPT
Type Cooling System Oil to Air
Type Air Intake System Two Stage Dry
Type of Control 0-100% Demand
Tire Size 8-14.5
Operating Pressure Range 70-150 psig (4.9 - 10.3 Bar)
Estimated Weight, Serviced 23,800 Lbs.
ENGINE SPECS
CATERPILLAR CUMMINS
Type Diesel Diesel
Number of Cylinders 6 6
Bore and Stroke 5.39” x 6.73” (137 x
171mm)
5.39” x 6.65” (137 x
169mm)
Displacement 928 in ³ (15.2 L) 915 in ³ (15 L)
Total Oil Capacity 8.75 gal. (33 L) 12 gal. (45.41 L)
Cooling System Capacity 18.5 gal. (70 L) 18.5 gal. (70 L)
Battery Rating 24 Volts 24 Volts
CCA @ 0ºF 1400 Amps per Battery 1400 Amps per Battery
Idle Speed 1400 RPM 1400 RPM
Fuel Tank Capacity 200 gal (757 L) 200 gal. (757 L)
COMPRESSORS ENGINES
Rated Delivery
Rated Operating
Pressure
Model
HP @ Rated
RPM
Full Load
Speed
CATERPILLAR
D1300SHCA 1300 cfm (37 m ³/min) 150 psig (10.3 Bar) C15 ACERT 475 HP 1800 RPM
D1600SCA 1600 cfm (45 m ³/min) 125 psig (8.6 Bar) C15 ACERT 475 HP 1900 RPM
D1600SHCA 1600 cfm (45 m ³/min) 150 psig (10.3 Bar) C15 ACERT 540 HP 2000 RPM
D1800SCA 1800 cfm (51 m ³/min) 100 psig (8.6 Bar) C15 ACERT 475 HP 2100 RPM
CUMMINS
D1300SHCU 1300 cfm (37 m ³/min) 150 psig (10.3 Bar) QSX15 485 HP 1800 RPM
D1600SCU 1600 cfm (45 m ³/min) 125 psig (8.6 Bar) QSX15 485 HP 1900 RPM
D1600SHCU 1600 cfm (45 m ³/min) 150 psig (10.3 Bar) QSX15 535 HP 2000 RPM
D1800SCU 1800 cfm (51 m ³/min) 100 psig (6.9 Bar) QSX15 485 HP 2100 RPM
D1800SMCU 1800 cfm (51 m ³/min) 125 psig (8.6 Bar) QSX15 535 HP 2100 RPM
45. FEATURES:
ELECTRIC MOTOR 230/460 volt, NEMA T-frame, C-face, TEFC, energy efficient.
ELECTRIC Cam-Lok cable connectors.
MOTOR STARTER 460 volt, wye delta starter with 110 volt controls, Nema-4 enclosure, UL, ETL listed
and solid state three phase overload relay. (50-HP 230/460)
PROTECTIVE
DEVICES
Class 20 solid state overload relay, high air temperature, high pressure shutdown
switches and anti-restart pressure switch, preventing starting while air compressor is
pressurized. Electric Phase Reversal, Anti-reversing warning light standard.
AIR INTAKE FILTER Heavy duty 2-stage
CONTROLS Full modulation, solenoid controlled for smooth lowest possible no load power.
Automatic start/stop or constant speed. Timed dual control.
ACOUSTICAL
ENCLOSURE
Easy removable panels for faster maintenance and accessibility.
SKID MOUNTING Complete fluid containment skid with drains.
LIFTING POINT Central located lift bail for ease of loading and unloading
INSTRUMENTATION Line pressure gauge, discharge pressure gauge, hour meter, temperature gauge,
lube filter and separator element differential gauges.
LUBE FILTER Spin on type mounted strategically for ease of maintenance.
ELECTRIC
CONSTRUCTION
COMPRESSORS
46. MODEL 50UD 100DG 200DG 250DG 350UD 400UD
COMPRESSOR DATA 60Hz
Capacity, ACFM 200 440 750 900 1490 1490
Maximum full load/unload, psig 150 125 150 150 125 150
Minimum full load, psig 70 70 70 70 70 70
Motor horsepower 50 100 200 250 350 400
COOLING DATA, AIR COOLED
Fan Horse Power 1HP 3 HP 5 HP 10 HP 15 HP 20HP
Aftercooler approach degree F 12 10 15 15 10 10
Fluid capacity 5 GAL 10 GAL 25 GAL 25 GAL 45 GAL 45 GAL
DISCHARGE PIPING, NPT FEMALE
Air cooled, base mounted 1-1/4” 2” 3” 3” 3” 3”
ELECTRICAL DATA
Compressor Motor, FLA @460V 58 112 229 287 392 443
Compressor Motor, FLA @ 230V 116 N/A N/A N/A N/A N/A
Starting Amp Requirement 140/280 300 542 690 957 1049
1201 W. US Highway 20
Michigan City, IN 46360
Tel: 219-874-2497
Tel: 800-438-6203
www.sullivanpalatek.com
Email: info@palatek.com
Distributed By:
Electric 10/11 1m
Mike Gonder, Inside Sales Manager Melissa Shepherd, Inside Sales Michael Anderson, Service Manager
Ph: 219-874-2497 x7016 Ph: 219-874-2497 x7013 Ph: 219-874-2497 x7049
mgonder@palatek.com mhommey@palatek.com Cell: 219-670-0613
manderson@palatek.com
47. ®
Aftercooler/Dryer
Air Treatment
Skid Package
Aftercooler - Filter - Dryer Construction Packages
The Advantages of owning a Sullivan-Palatek Dryer Skid Package:
»» Operation of the desiccant dryer skid package is fully automated with all sequencing and
function controlled by an electronic timing module.
»» Wet compressed air discharged from the air compressor enters the Aftercooler where the
compressed air temperature is reduced to near ambient.
»» The coalescing prefilter removes any liquid moisture carryover.
»» The regenerative dryer reduces air to -40°F.
»» Aftercooler fan is available with air or electric motor.
»» 100 - 4000 CFM at -40°
»» Heavy duty drag/fork skid with I-beam frame and single point lift.
»» Heavy duty control filter.
»» High performance .01-micron coalescer
»» Centrifugal separator with drain.
SPS
SPAF
48. 1201 W. US Highway 20
Michigan City, IN 46360
Tel: 219-874-2497
Tel: 800-438-6203
www.sullivanpalatek.com
Email: info@sullivanind.com
DIMENSIONS
Distributed By:
MODEL HEIGHT
(inches)
A
LENGTH
(inches)
B
WIDTH
(inches)
C
WEIGHT
(pounds)
SPS-500RS 86.00 60.50 50.00 2300
SPS-1000RS 96.00 75.00 62.38 3655
SPS-1600RS 103.50 96.00 73.00 4918
SPAF-500RS 58.00 45.00 29.00 400
SPAF-1000RS 68.00 50.50 38.00 1434
SPAF-1600RS 71.00 67.00 48.00 1652
Contact Factory for Other Available Sizes
Aftercooler RP 5/12 1m
B
A
C
B
A
C
SPS Series
SPAF Series
49. 1201 US Hwy 20 West · Michigan City, IN 46360 · Tel: 219-874-2497 · FAX: 219-872-5043 · www.sullivanpalatek.com
SULLIVAN’S NEW WEATHER-ALL PORTABLE COMPRESSOR FLUID
• Used for all weather
conditions
• Anti-wear additives
• Anti-rust additives
• Anti-foaming additives
• Quick water separation
• Excellent viscosity index
• Extended life
As of December 2010, we are now using WEATHER-ALL 5W-20 as our standard factory fill
in all our portable compressors.
Pricing is as follows:
5 gallon Pail P/N 00823062 0009 $130.00 list
55 gal Drum P/N 00823062 0010 $1,375.00 list
Standard discount levels apply
ANNOUNCING!ANNOUNCING!
50. Product Description
WEATHER-ALL™ COMPRESSOR FLUID is designed for all types of rotary screw air compressors used
in varying conditions encountered in the construction industry.
Sullivan-Palatek’s Weather-All is formulated as a 5W-20 Multi-Viscosity fluid with additives for maximum
protection against scuffing and wear to bearings and rotors.
Extensive testing has shown this fluid exhibits excellent resistance to foaming, oil oxidation and corrosion.
Special attention has been made toward limiting rust of ferrous metals and corrosion of yellow metals.
Product Features and Benefits
Our Weather-All lubricant will provide extended life compared to other brand oils.
Weather-All fluid provides quick water separation which helps protect equipment in wet and humid
service environments.
Our compressor fluid has an excellent viscosity index (180), as well as, low pour point (-40°F).
This specially formulated multi-viscosity compressor fluid provides wear control for steel and brass parts
when operating at maximum pressure ratings, resulting in excellent compressor operation.
Weather-All Compressor 5W-20 Fluid combines the superior additive technology and quality hydrocarbon
based oils for Extended Life and is a custom-formulated lubricant specifically designed for long life under
the severe, demanding conditions normally encountered in recirculating systems such as rotary screw
compressors.
Weather-All combines the advantages of a synthesized hydrocarbon, which results in performance
improvements beyond conventional mineral oils and many synthetic oils.
Characteristics:
• Exceptional oxidative stability • Longer life
• Low sludging tendency • Low evaporation loss
• Thermal & hydrolytic stability • Improved performance
• Rust and corrosion inhibited • Viscosity stability
• Lower equipment maintenance • Extended anti-wear protection
1201 US Hwy 20 West · Michigan City, IN 46360 · Tel: 219-874-2497 · FAX: 219-872-5043 · www.sullivanpalatek.com
Portable Compressor Fluid Multi-Viscosity
ISO Viscosity Grade 32 Viscosity Index 180
SAE Viscosity Grade SW-20 Pour Point -40ºC
Viscosity, cSt. 210ºF 50 SUS -40ºF
100ºF 170 SUS Flash Point 199ºC
Normal Service Life 2000 Hrs
These values are not intended for use in preparing specifications
5W-20
52. Contact Info
Sullivan-Palatek, Inc.
1201 US Hwy 20 West
Michigan City, IN 46360
T: 219-874-2497
F: 219-872-5043
productsupport@palatek.com
www.sullivanpalatek.com
53. iii
Preface
This document explains product support policies and procedures that apply to Portable Air Compressor products.
Our objective is to provide superior product support and assist you in achieving your business goals. We provide
superior spare parts availability, accurate technical information and prompt warranty claim resolution. We
have established these operating guidelines and procedures for the conduct of business. As Sullivan-Palatek
distributors, your understanding of the policies and procedures is important for efficient day-to-day business
between our companies.
The handbook is brief. We have addressed all of the important issues and frequently asked questions. If any
issue is unclear please contact us for clarification. A list of key contact persons is included with this manual.
Everyone at Sullivan-Palatek is eager to assist you.
Thank you for your business and the opportunity to be of service.
54. iv
A word about older products...
Our distributors are occasionally asked to provide service and repair on older Sullivan products. Many parts
available today can be used to make these repairs. However, not all parts are stocked or readily available. Contact
our Product Support or Part Department staff to determine if we can help. Our general policy is as follows:
We will continue to provide support and spare parts for products manufactured before 1998 as long as a
reasonable demand exists and sources are available. Prices charged for technical documentation and support
for older products reflects our costs for providing these services. We do not stock parts for which no sustainable
demand exists. Non-current parts for machines produced before 1998 may not be available or may only be
available under special order terms. An example is certain compressor enclosure components (fabricated sheet
metal) for models no longer in production. Orders for parts in these categories, if a source is available, will be
accepted on a pre-paid, non-cancelable and non-returnable basis. Some time may be required to obtain current
pricing. Delivery times may be extended and will be advised at the time of order.
55. v
Contents
Spare Parts...................................................................................................................................................... 1
Ordering Parts................................................................................................................................................................ 1
Shipping and Freight..................................................................................................................................................... 1
Payment Terms.............................................................................................................................................................. 1
Damaged Freight........................................................................................................................................................... 1
Returns and Adjustments ........................................................................................................................................... 2
Parts Prices.................................................................................................................................................................... 2
Recommended Parts Lists............................................................................................................................................ 2
Warranty Policy............................................................................................................................................... 3
Warranty Duration......................................................................................................................................................... 3
Warranty Commencement............................................................................................................................................ 3
Diesel Engines............................................................................................................................................................... 3
Airends........................................................................................................................................................................... 3
What Is Covered............................................................................................................................................................. 3
What Is Not Covered...................................................................................................................................................... 3
Customer Responsibility............................................................................................................................................... 4
Request for Warranty Adjustment (RWA)..................................................................................................... 5
Warranty Adjustment Qualification............................................................................................................................... 5
Submitting Request for Warranty Adjustment (RWA).................................................................................................. 5
Return Stock Authorization (RSA)................................................................................................................................. 5
Warranty Adjustment Approval..................................................................................................................................... 5
Warranty
Portable Compressors.................................................................................................................................... 7
57. 1
Spare Parts
Ordering Parts
Place your orders with our Parts Department by telephone, telefax, SmartEquip or e-mail.
• Telephone: 219-874-2497 or 800-438-6203
• Telefax: 219-872-5043 or 800-725-6203
• SmartEquip: Password required (refer to SmartEquip below)
• E-mail: parts@palatek.com
Please include the following information on all orders:
• Purchase order number
• Shipping address
• Shipping instructions
• Serial number of compressor
• Part number, description and quantity of each part required
• Contact name and telephone number, in case we have questions
• Customer account number, if known
The parts department operates from 8:00 AM to 5:00 PM, Central Time, Monday through Friday. Orders received
before 12:00 noon will usually be shipped on the same day. In emergency “machine down” situations we will
make every reasonable effort to ship parts ordered as late as 3:00 PM. Our ability to do this will be determined by
the volume of orders in process on the particular day.
Sullivan-Palatek participates in the SmartEquip online system. Distributors with established Sullivan-
Palatek accounts are encouraged to obtain a SmartEquip login user name and password. This enables
them to enter orders electronically. Contact the Parts Department about incentives for using SmartEquip
and to obtain a password. Entering orders using SmartEquip is easy and includes all prompts necessary to
provide the information we need to process your order. Access to the Sullivan-Palatek SmartEquip web site
can be found at www.SullivanPalatek.com and click on SmartEquip or go directly to our SmartEquip web
site at www.smartequip.net/sullivan/index.html. Anyone can enter as a guest to look up information and
review illustrated parts lists.
Shipping and Freight
We ship F.O.B. our plant. Unless specified otherwise we will ship orders by UPS Ground or Motor Freight depending
on size and weight. Freight charges will be prepaid and added to the invoice. Expedited shipping is available by
UPS, Federal Express, DHL and others. Discuss your requirements with our Parts Department representatives.
Payment Terms
Established accounts that are current have “open account” status with an established line of credit. Standard
terms of payment are net 30 days. Sullivan-Palatek does accept Master Card and Visa in instances where no
customer account has been established, and we are unable to help by referring a customer to an established
distributor for support.
Damaged Freight
• All orders are shipped F.O.B., Michigan City, IN. This means that the title to the goods transfers to the
consignee when the freight carrier accepts the goods for transport at our plant.
58. 2
• The consignee must make freight damage claims to the delivering carrier.
Do not return damaged shipments to Sullivan-Palatek.
• Contact our traffic department if you require assistance or the delivering carrier fails to meet its obligation
under ICC rules.
• You have a limited time within which to file claims and report concealed damage. Contact the delivering carrier
to determine these time limits.
Returns and Adjustments
Notify the Parts Department of errors, under-shipments or defective parts received within 15
days of the shipment date. All sales are considered final after 15 days from shipment.
Do not return parts to Sullivan-Palatek without first obtaining a Return Stock Authorization
(RSA). Shipments received without an RSA are subject to being refused by our Receiving
Department.
Contact our Parts Department to request an RSA. We will accept parts found to be defective upon receipt
(excluding freight damaged parts) or parts shipped in error (meaning not according to your purchase order). We
will also accept current parts that are surplus in your inventory if they were purchased for stock within the past 12
months. Credit toward future purchases will be allowed as follows:
Defective Parts and Parts Shipped in Error
For parts found to be defective upon receipt (excluding freight damaged parts) or parts shipped in error, notify us
within 15 days of shipment from our plant and we will issue full credit, including prepaid return freight, upon return
of the part(s) in new, undamaged condition.
Surplus Spare Parts Inventory
For surplus spare parts inventory, established distributors who buy spare parts for their stock to support Sullivan-
Palatek products may request the return of stock in excess of their market needs. Parts will be accepted and credit
issued for the net price paid for the part(s) less a restocking charge. Proof of purchase will be required (invoice or
packing slip number). Certain types of parts are non-returnable. These include common hardware, gaskets, seals,
fluids, and any items with limited shelf life. Parts identified as non-returnable at the time of order, non-current
parts, and special-order parts are not returnable. Each line item must have an extended value (quantity X price)
of at least $10. Authorized returns must be received, freight prepaid, within 45 days of the date of the return
authorization or the RSA is void.
To receive prompt credit and avoid complications, remember the following:
• Always obtain an RSA
• Ship returns freight pre-paid
• Mark all boxes with RSA number and enclose a copy of the RSA as a packing list
• Surplus parts returned must be in new, undamaged condition.
Parts Prices
We publish a Parts Price List that contains prices of frequently ordered parts. Prices of unlisted parts can be
obtained by calling the Parts Department. A general price review is accomplished periodically and prices are
subject to change without notice. The price list is available on CD as an MS Excel spreadsheet and Adobe PDF
format. To obtain copies of the Parts Price List contact the Parts Department.
Recommended Parts Lists
Recommended parts lists are published in each User’s Manual for current products. These lists contain basic
recommendations. For special situations our Service Department can prepare custom recommendations. Contact
our Parts Department for assistance.
59. 3
Warranty Policy
Warranty Duration
Sullivan-Palatek, Inc. warrants its portable compressor products to be free from defects in material and
workmanship for the following periods:
Portable Compressors
• Overall — 1 year, unlimited hours
• Airend installed in a standard pressure (100 psi) and high pressure (150 psi) portable compressor — 3 years,
unlimited hours
• Airend installed in a “Very High” pressure (350 psi or more) compressor — 2 years, unlimited hours
• Remanufactured Air Ends purchased to replace worn or damaged — 1 year
Warranty Commencement
To initiate the warranty the original purchaser, or the authorized Sullivan-Palatek distributor on the behalf of the
purchaser, is required to complete the warranty registration form provided in the information and manuals folder
with all new products. The warranty period begins with delivery of the product to the first user, whether as a sale or
a rental. The maximum warranty obligation by Sullivan-Palatek is the stated warranty period plus 6 months from
shipment of the product from our factory. See the product warranty statement for details.
Diesel Engines
The engine manufacturer warrants the engines installed in Sullivan-Palatek portable air compressors. Consult the
written engine warranties for details. Registration of the engine for warranty with the manufacturer will ensure
prompt warranty service from engine dealers. Customers should contact the nearest appropriate engine dealer
to obtain prompt warranty service and repairs or to purchase extended warranty coverage. Note that John Deere
engines in D185 through D375 compressor models have warranty coverage for up to 5 years or 5000 hours
without additional cost. See the warranty information with each compressor or consult our Service Department for
details.
Airends
The 3-year airend warranty specifically covers the stator and rotor assembly. The warranty period for related or
attached components such as drive coupling, inlet valve, air-oil separator system and shaft seal is one year.
What Is Covered
Sullivan-Palatek obligations under its warranty include:
• Repair or replace, at our option and subject to the return of failed parts when requested, any parts found to be
defective in material or workmanship that fail within the warranty period.
Credit will be issued at distributor net price for parts approved under warranty.
• Pay reasonable labor at our published rate to repair or replace the failed part or parts.
• For portable compressors with two or three axles (currently 750 cfm and higher) pay reasonable travel costs
to make field repairs. Travel is not reimbursed for field repairs to Utility and single axle compressor products
(currently 185 cfm through 375 cfm). Travel cost reimbursement is allowed up to a 100-mile radius and 4
hours labor per round trip. Only one trip per warranty incident will be reimbursed.
What Is Not Covered
• The cost of prescribed and normal maintenance and service
• Consequences of negligence, misuse, accident, improper application or storage
• Consequences of any modification or alteration not approved by Sullivan-Palatek
60. 4
• Necessary labor and other costs related to removing accessories or attachments installed by the distributor or
customer to gain access for warranty repairs or troubleshooting
• Premium or overtime labor to make repairs at the request of the customer
• Labor costs in excess of what Sullivan-Palatek considers necessary or customary for a given repair
• Incidental travel costs such as meals, lodging, tolls and other similar costs
• Travel cost necessary to service a compressor located more than 100 miles from the servicing distributor’s
location
• Outside services or repairs not authorized by Sullivan-Palatek
• Purchase of repair parts, other than normal shop supplies, from other than Sullivan-Palatek to make
warrantable repairs unless approved in advance by Sullivan-Palatek in writing
Customer Responsibility
The following elements are the responsibility of the customer/ distributor under the Sullivan-Palatek warranty.
• Provide written notice of warrantable failure within the warranty period.
• Make the product available for repair at an authorized Sullivan-Palatek repair facility.
• Pay all costs of returning failed parts to Sullivan-Palatek when requested.
• Pay shipping cost for replacement parts.
61. 5
Request for Warranty Adjustment (RWA)
Sullivan-Palatek distributors and rental companies established as direct accounts are authorized to perform
warranty repairs. Upon completion of the repair, a Request for Warranty Adjustment (RWA) can be submitted for
reimbursement in accordance with the terms and conditions of the Sullivan-Palatek warranty.
Warranty Adjustment Qualification
Only failures occurring during the warranty period will be considered. Claims submitted more than 30 days after
the warranty period has expired will be denied. Hours reported on a claim are subject to verification. Include the
service work order (distributor work order) with the RWA.
Hold failed parts for possible return to Sullivan-Palatek until claim has been settled. Maintain parts in the “as
failed” condition and fully assembled for our evaluation.
Do not disassemble airends or parts. Disassembly will void the warranty and may result in
additional cost for an exchange airend.
Only new or remanufactured parts or components furnished by Sullivan-Palatek are to be used for warranty
repairs. Proof of purchase of replacement parts is required and will be established by identifying the Invoice
Number or Packing List Number of the order for warranty parts. The claim form provides space to list the invoice
number for parts purchased to make repairs.
Submitting Request for Warranty Adjustment (RWA)
Submit RWA within 30 days of completion of repairs.
Timely submission of claims is important. Claims submitted long after the repair date are difficult to verify and
resolve. Amounts paid on late claims may be less than requested if verification and support data are missing or
unavailable.
The form must be completed with no fields omitted. Incomplete RWA’s will be returned and processing suspended
pending the receipt of the missing information.
The RWA can be submitted by email or by telefax using our RWA form:
Email: productsupport@palatek.com
Telefax: 219-878-8544
Return Stock Authorization (RSA)
Do not return parts without a Request Stock Authorization (RSA) and always include the RSA
with the parts being returned.
Sullivan-Palatek will request that parts, other than air ends, be returned only when necessary to fairly and properly
resolve the claim. All failed air ends must be returned to receive full warranty adjustment or the allowable core
credit.
Parts must be returned in the “as failed” condition and fully assembled. This is critical for fair warranty
determination and correcting problems to improve our products for your benefit as a user.
Claims are held in suspense pending return of parts when required. Parts must be promptly returned after receipt
of the RSA to ensure timely processing of the related claim. The RWA and RSA will be suspended for 20 days from
date of issue. Parts should be received at our factory within that time.
Warranty Adjustment Approval
Technical assistance and advice on the conduct and execution of repair does not constitute warranty approval.
Only after all facts are known will Sullivan-Palatek determine the warranty outcome. We recommend that the
servicing distributor make this clear to the customer and obtain a commitment from the customer to pay for any
non-warranty repairs.
The preceding is only to assist in the administration of warranty coverage and is not a warranty statement. Only
the written warranty will control the terms and conditions.
63. 7
Warranty
Portable Compressors
Sullivan-Palatek, Inc. warrants its new portable air compressor products to be free from defects in material and
workmanship, subject to the following provisions:
Warranty Registration: To validate the warranty for each product the purchaser shall complete and return the warranty
registration form within 30 days of delivery to the first user or rental.
Warranty Period: The warranty period for applicable Sullivan-Palatek products is as follows (subject to the Exclusions and
Limitations noted below):
Air ends on new machines – stator and rotor assembly: Single stage compressor models: the first to expire; 42 months
from shipment by Sullivan-Palatek or 36 months from delivery to the first user. Two stage high pressure compressor
models: the first to expire; 30 months from shipment by Sullivan-Palatek or 24 months from delivery to the first user.
Remainder of new portable air compressor machines: the first to expire; 18 months from shipment by Sullivan-Palatek or
12 months from delivery to the first user.
Parts, accessories and attachments sold separately from machines, excluding warranty replacement parts and hand
tools: the first to expire; 6 months from shipment by Sullivan-Palatek or 3 months from delivery to the first user.
Warranty replacement parts: remainder of the original warranty period of the replaced part.
Sullivan-Palatek’s Obligations: Sullivan-Palatek’s exclusive obligations with respect to breach of warranty are (i) to repair
or replace (at Sullivan-Palatek option and subject to return of defective parts) any defective part, (ii) to pay the reasonable
cost of making the repair or reinstalling the replacement part and (iii) only for air compressors having two or more axles,
to reimburse up to four hours travel labor at the travel reimbursement rate and mileage at the mileage reimbursement
rate for up to 200 miles (100 miles travel radius) per event to make repairs.
Customer’s Responsibility: As a condition to Sullivan-Palatek’s obligations under this warranty, Customer shall (i) give
Sullivan-Palatek written notice of any warrantable failure of any Sullivan-Palatek product within the applicable warranty
period, (ii) make the product available for repair at a Sullivan-Palatek authorized repair facility, (iii) pay all costs of
returning failed parts to Sullivan-Palatek, (iv) pay shipping costs for replacement parts, (v) pay reasonable travel expenses
for field repairs performed at customer’s request and (vi) pay the costs of investigating performance complaints that are
not covered by this warranty.
Exclusions and Limitations: Air end seals are not warranted. Engines, tires and batteries are not warranted by Sullivan-
Palatek and are warranted only by the manufacturers of these components. Sullivan-Palatek has no obligation for
product failures or defects resulting from overloading, misuse, neglect, accident, failure to comply with Sullivan-Palatek’s
product manual or failure to install product improvements provided by Sullivan-Palatek. Use on a product of attachments,
accessories or service parts not supplied or recommended by Sullivan-Palatek may, at Sullivan-Palatek’s option, void the
warranty of that product. Sullivan-Palatek has no obligation to pay costs of returning defective parts to Sullivan-Palatek or
shipping replacement parts to customer.
THIS WARRANTY IS SULLIVAN-PALATEK’S ONLY WARRANTY OF ITS PORTABLE AIR COMPRESSOR PRODUCTS AND IS
IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR IMPLIED. ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR
OF FITNESS FOR A PARTICULAR PURPOSE ARE EXCLUDED. SULLIVAN-PALATEK HAS NO OBLIGATION UNDER THIS
WARRANTY OR OTHERWISE (REGARDLESS OF THE FORM OF ACTION) FOR SPECIAL, CONSEQUENTIAL OR INCIDENTAL
DAMAGES, INCLUDING WITHOUT LIMITATION LOST PROFITS OR LOST INCOME.
This warranty applies to all Sullivan-Palatek portable air compressors shipped after April 1, 2011 unless expressly
superseded by a later warranty. In the event of any conflict between this warranty and earlier warranty statements, the
terms of this warranty will apply.
64.
65.
66. Contact Info
Sullivan-Palatek, Inc.
1201 US Hwy 20 West
Michigan City, IN 46360
T: 219-874-2497
F: 219-872-5043
productsupport@palatek.com
www.sullivanpalatek.com
67. ®
M-Series
Compressors
CDFE CDD
INDUSTRIAL AIR COMPRESSOR - 5, 7.5, 10 HP M-SERIES
»» Modular oil flooded rotary screw continuous duty industrial air compressor
»» 208/230/460/575 volt 3-phase open drip motor
»» Full voltage magnetic starter with 115 volt control power
»» Automatic dual control
»» Line pressure gauge, oil temperature gauge, and hour meter
»» Air cooled oil cooler/aftercooler with Palasyn 45, 4000 hour synthetic oil
»» Spin on type oil filter and separator elements for ease of maintenance
»» Air Filter: combination pleated and foam dry type, easily replaceable
CDF/CDFE
Complete compressor package with
mounted refrigerated air dryer, high
efficiency coalescing air filter, and receiver
tank. A modulating thermostatic expansion
valve gives a more effective refrigeration
control over a wide span of operating
conditions. It prevents compressor failure
due to liquid return commonly found in
capillary
tube
designs.
CDD/CDDE
Complete compressor package with
mounted desiccant air dryer and
high efficiency coalescing air filter.
EXTENDED LIFE mounted
desiccant dryer to eliminate
moisture and contaminants.
-40ºF Dew Point
High Efficiency Coalescing Air Filter
High Quality Compressed Air Filtration
Particle Removal Down to 0.01 Micron
Max. Oil Carryover 0.008 PPM w/w
Nominal Pressure Drop 1.2 PSID
ISO 8573 (Class 1)
99.9999% Efficiency
(Shown with optional
receiver tank)
68. 1201 W. US Highway 20
Michigan City, IN 46360
Tel: 219-874-2497
Tel: 800-438-6203
www.sullivanpalatek.com
Email: info@palatek.com
TECHNICAL DATA
MODEL LENGTH HEIGHT WIDTH
Base Mount 38.63” 26.34” 24.14”
Base Mount Enclosed 38.88” 27.43” 24.46”
Platform Mount with Separator Trap 38.63” 56.34” 24.14”
Platform Mount Enclosed w/Sep-Trap 38.88” 57.43” 24.46”
Tank Mount - 80G with Auto Drain 65.2” 48.9” 25.20”
Tank Mount Enclosed - 80G w/drain 64” 50.93” 25.20”
Tank Mount - 120G with Auto Drain 69.88” 51.87” 23.74”
Tank Mount Enclosed - 120 G w/drain 68” 53.93” 24.46”
Distributed By:
SELECT THE COMBINATION
THAT’S RIGHT FOR YOUR JOB
Consult factory for shipping weights.
COMPRESSOR DATA M5 HM5 HHM5 M7.5 HM7.5 HHM7.5 M10 HM10 HHM10
Capacity acfm 22 18 15.5 29 25 22 44 35 32
Pressure @ Full Load psig (bar) 125 (8.6) 150 (10.3) 175 (12.1) 125 (8.6) 150 (10.3) 175 (12.1) 125 (8.6) 150 (10.3) 175 (12.1)
Minimum Pressure psig (bar) 60 (4.1) 60 (4.1) 60 (4.1) 60 (4.1) 60 (4.1) 60 (4.1) 60 (4.2) 60 (4.2) 60 (4.2)
Motor Output (60 Hz) hp (kW) 5 (3.7) 5 (3.7) 5 (3.7) 7.5 (5.6) 7.5 (5.6) 7.5 (5.6) 10 (7.5) 10 (7.5) 10 (7.5)
Motor Speed rpm 1755 1755 1755 3530 3530 3530 3515 3515 3515
Motor Output @ Full Load hp (kW) 4.6 (3.4) 5.0 (3.7) 5.2 (3.9) 10.5 (7.8) 8.2 (6.1) 7.7 (5.7) 10.9 (8.1) 9.7 (7.2) 11.2 (8.4)
Motor Output @ 100 psig hp (kW) 4.3 (3.2) 3.9 (2.9) 3.3 (2.5) 7.2 (5.4) 5.6 (4.2) 5.3 (3.9) 9.8 (7.3) 8.2 (6.2) 8.2 (6.2)
Driven Pulley 2.65 2.8 3.00 3.35 3.65 4.12 4.75 5.30 5.60
Drive Ratio 2.26 2.14 2.00 1.79 1.64 1.46 1.26 1.13 1.07
Rotor Diameter mm 60 60 60 60 60 60 75 75 75
COOLING DATA
Fan Airflow cfm 1100 1100 1100 1100 1100 1100 1100 1100 1100
After Cooler Approach °F (°C) 20 (11) 20 (11) 20 (11) 20 (11) 20 (11) 20 (11) 20 (11) 20 (11) 20 (11)
Fluid Capacity gallons (L) 1 (3.8) 1 (3.8) 1 (3.8) 1 (3.8) 1 (3.8) 1 (3.8) 1.50 (5.7) 1.50 (5.7) 1.50 (5.7)
SOUND DATA
Air-Cooled (Open) dba @ 1m 72 72 72 82 82 82 82 82 82
Air-Cooled (Enclosed) dba @ 1m 68 68 68 75 75 75 74 74 74
DISCHARGE PIPING
Air-Cooled (Base-Mounted) NPT 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4
Tank-Mounted (Tank End) NPT 2 2 2 2 2 2 2 2 2
ELECTRICAL DATA
Motor FLA @ 575V (3-Phase) amps 5.5 5.5 5.5 6.8 6.8 6.8 9.6 9.6 9.6
Motor FLA @ 460V (3-Phase) amps 6.6 6.6 6.6 8.6 8.6 8.6 11.6 11.6 11.6
Motor FLA @ 230V (3-Phase) amps 13.2 13.2 13.2 17.2 17.2 17.2 23.2 23.2 23.2
Motor FLA @ 230V (1-Phase) amps 20.5 20.5 20.5 33 33 33 46 46 46
Motor FLA @ 208V (3-Phase) amps 14.7 14.7 14.7 19 19 19 24.5 24.5 24.5
Motor FLA @ 208V (1-Phase) amps 22.7 22.7 22.7 36.5 36.5 36.5 50.9 50.9 50.9
Motor FLA @ 200V (3-Phase) amps 15.3 15.3 15.3 19.8 19.8 19.8 25.5 25.5 25.5
Starter Enclosure Rating NEMA 1 1 1 1 1 1 1 1 1
Control Voltage volts 115 115 115 115 115 115 115 115 115
Motor Enclosure NEMA ODP ODP ODP ODP ODP ODP ODP ODP ODP
Motor Insulation Class NEMA F F F F F F F F F
Motor Service Factor NEMA 1.15 1.15 1.15 1.15 1.15 1.15 1.15 1.15 1.15
Motor Maximum Starts/Hour 15 15 15 12 12 12 12 12 12
M-Series RP 7/12 1M
69. ®
15-30, 40-50, 50-60 HP
Line Shaft
INDUSTRIAL AIR COMPRESSOR - 15-30 LSC, 40-50 LSC, 50-60 LSC
COMPRESSOR:
»» Continuous duty oil flooded rotary screw industrial
air compressor
»» 5 Year Platinum Warranty Available
PILLOW BLOCK:
»» Solidly mounted and aligned to compressor
shaft allowing drive shaft direct connection
and minimizing power loss
FRAME:
»» Rugged steel construction
COUPLING & DRIVE:
»» Compressor is flange mounted to frame for positive
alignment and direct driven by low maintenance
coupling
»» 5 Year Platinum Warranty Available
AIR INTAKE FILTER:
»» Heavy duty dry type with replaceable element
SEPARATOR TANK:
»» ASME coded 200 PSIG sump tank, minimum
pressure check valve, relief valve, high efficiency
replaceable oil separator element, fluid level sight
indicator and vented fill cap
»» 5 Year Platinum Warranty Available
MOUNTING:
»» Base mounted, no special foundation required
»» Optional tank and platform mounting available
COOLING SYSTEM:
»» Air cooled with air cooled oil cooler and aftercooler
»» Compressor temperature maintained by auto
adjusting thermo valve
»» 5 Year Platinum Warranty Available.
CONTROLS:
»» Full modulation pneumatic control for smooth control
»» Pilot unloader valve for minimizing power with no air
demand
INSTRUMENTATION:
»» Air pressure and discharge temperature gauges
PROTECTIVE DEVICES:
»» High temperature shut down switch for interfacing to
driver’s safety circuit
»» Overpressure relief valve
LUBRICATION:
»» Factory filled with 4000 Hour Palasyn 45
»» Equipped with microfiber full flow, spin on oil filter
GENERAL:
»» Consult factory for options or accessories not listed
70. 1201 W. US Highway 20
Michigan City, IN 46360
Tel: 219-874-2497
Tel: 800-438-6203
www.sullivanpalatek.com
Email: info@palatek.com
COMPRESSOR TECHNICAL DATA
Distributed By:
MODEL 15-30 LSC 40-50 LSC 50-60 LSC
COMPRESSOR DATA
Capacity, ACFM 55-115 165-210 215-265
Maximum full load/unload, psig 125 125 125
Minimum full load, psig 60 60 60
Minimum required driver HP 20-35 47-60 65-70
Compressor RPM 1750-3550 3550-4500 4250-5250
Driven pulley C/F C/F C/F
Rotor diameter 108mm 108mm 108mm
L/D 1.65 1.65 2.10
COOLING DATA, AIR COOLED
Fan air flow, CFM 1000-2500 3500-5000 5500-6500
Aftercooler approach degree F 15 15 15
Oil sump, fluid capacity 2.5 gal 3 gal 3.5 gal
SOUND DATA (dba @ 1m)
Air cooled, open 75-81 84 87-90
Note: Rated capacity in ACFM is based on standard conditions @125 psig.
Capacity will vary with ambient conditions;
i.e. temperature and barometric pressure, and compressor output pressure.
Line Shaft RP 3/11 1.5m
BASE MTD 15-30LSC 40-50LSC 50-60LSC
A 55” 64” 70”
B 31” 31” 31”
C 30” 40” 55”
Weight 400 Lbs 500 Lbs 650 Lbs
AB
C
71. ®
Model 15 -30 CDD
Compressors
INDUSTRIAL AIR COMPRESSOR - Model 15-30 HP
Compressor & Desiccant Dryer Package
CDD/CDDE
Complete compressor package
with mounted desiccant air dryer,
high efficiency coalescing air filter,
and receiver tank.
EXTENDED LIFE mounted
desiccant dryer to eliminate mois-
ture and contaminants.
-40ºF Dew Point
ELECTRIC MOTOR:
»» Nema T-Frame, C-Face, double shaft, open drip proof squirrel cage induction type.
»» Direct coupling to motor for positive alignment.
MOTOR STARTER:
»» Full voltage magnetic starter with 120 volt controls, Nema 1 enclosure, circuit
breaker, transformer and three phase over load protector.
AIR INTAKE FILTER:
»» Multi-stage dry type with replaceable element.
CONTROLS:
»» Full modulation, electronically controlled for smooth operation and lowest
possible no load power. Auto dual control, timed stop or constant run.
INSTRUMENTATION:
»» Line pressure gauge, fluid reservoir gauge, hour meter, discharge
temperature gauge, oil filter and separator element differential gauges.
»» Microprocessor control available.
PROTECTIVE DEVICES:
»» Class 20 overload relay, high temperature and overpressure shut down.
COOLING SYSTEM:
»» Air cooled with air cooler/aftercooler and factory filled with Palasyn 45 synthetic
lubricoolant. Equipped with micro fiber full flow oil filter.
AIR DRYER:
»» Desiccant air dryer and coalescing air filter for moisture removal, spin on
replaceable cartridges and built for -40ºF dew point.
MOUNTING:
»» Base mounted, no special foundation required. Optional tank, platform and acoustical
enclosure available. Consult factory for dimensions and weights of optional equipment.
72. 1201 W. US Highway 20
Michigan City, IN 46360
Tel: 219-874-2497
Tel: 800-438-6203
www.sullivanpalatek.com
Email: info@palatek.com
COMPRESSOR TECHNICAL DATA
Distributed By:
MODEL 60Hz 15D 20D 25D4 25D 30D7 30DG
COMPRESSOR DATA
Capacity, ACFM 55 80 95 110 115 125
Maximum full load/unload, psig 120/130 120/130 120/130 120/130 120/130 120/130
Minimum full load, psig 60 60 60 60 60 70
Motor horsepower 15 20 25 25 30 30
Motor speed, RPM 1,750 1,750 1,750 3,550 3,550 1,750
BHP @ full load 14 21.5 25 27 30 34
BHP @ 100 psig 13 19.1 22.2 24 28 32
Driven rotor coupling Direct Direct Direct Direct Direct Direct
Drive ratio Direct Direct Direct Direct Direct Direct
Rotor diameter & L/D 108mm x 1.65 108mm x 1.65 108mm x 2.1 108mm x 1.65 108mm x 1.65 108mm x 2.3
COOLING DATA, AIR COOLED
Fan air flow, CFM 1,000 2,200 2,250 2,600 2,600 4,600
Max. duct loss, “H2O 0.3 0.3 0.25 0.25 0.25 0.2
Aftercooler approach degree F 12 12 15 15 15 10
Heat rejection, BTU/hr. 34,700 51,600 59,200 68,500 71,600 81,408
Fluid capacity 3 gal. 3 gal. 3 gal. 3 gal. 3 gal. 6 gal.
COOLING DATA, WATER COOLED
GPM w/60 deg. F. water 1.5 2.3 3 3 3 4
GPM w/70 deg. F. water 1.9 2.9 3.7 3.7 3.7 4.4
GPM w/80 deg. F. water 2.5 3.8 5 5 5 6
Max. water temp., deg. F. 85 85 85 85 85 85
Water connection in-out 3/4”-3/4” 3/4”-3/4” 3/4”-3/4” 3/4”-3/4” 3/4”-3/4” 3/4”-3/4”
SOUND DATA (dba @ 1m)
Air cooled, open 78 80 81 88 88 82
Air cooled, enclosed 72 72 74 80 78 78
Water cooled, open 75 82 77 87 87 80
Water cooled, enclosed 76 77 73 80 82 70
DISCHARGE PIPING, (FNPT)
Air cooled, base mounted 1” 1” 1” 1” 1” 1”
Water cooled, base mtd. 1” 1” 1-1/2” 1-1/2” 1-1/2” 1-1/2”
Tank mtd. (@ tank end) 2” 2” 2” 2” 2” 2”
ELECTRICAL DATA
Motor, FLA @ 575V 15.4 20.8 27.2 23.2 28.0 31.2
Motor, FLA @ 460V 19.2 26.0 34.0 29.0 35.0 39
Motor, FLA @ 230V 38.4 52.0 68.0 58.0 70.0 78
Motor, FLA @ 208V 42.7 57.5 75.2 64.1 77.4 86.3
Motor, FLA @ 200V 44.2 59.8 74.0 66.7 89.0 89.7
Circuit Breaker Control 115 V 115 V 115 V 115 V 115 V 115 V
CDD RP 2/11 1.5m
73.
74. ®
“The Ultimate Performance Rotary Screw Air Compressor”
Shown with optional tank mount
INDUSTRIAL AIR COMPRESSOR - 15-40 HP
D Series
15 - 40 HP
Compressors
Features:
• Electric Motor 208, 230, 460, 575 Volts
• Motor Starter - 208/230/460/575 Volt (15-25 HP) 460/575 Volt (30-40 HP)
• Protective Devices
• Oil Level Sight Glass
• ASME Coded 200 PSI Separator/Sump Tank
• Direct Drive Coupling
• Quality Instrumentation
• All new Platinum and Platinum-Plus Warranties available.
75. The advantages of owning a
Sullivan-Palatek Rotary Screw
Air Compressor
Sullivan-Palatek manufactures one of the most
reliable, high performance, low maintenance air
ends in the industry.*
Our advanced rotor design features oversize
radial thrust bearings and precision working
rotary screws that provide virtually no wear.
With less friction and less heat, compressors
run cool and the circulating fluid lasts longer.
Standard Features:
Electric Motor
208/230/460/575 volt (15-25 HP) 230/460/575
volt (30-40 H.P.) Nema T-frame, C-face, open
drip proof squirrel cage induction type, energy
efficient.
Motor Starter
208/230/460/575 volt (15-25 HP) 460/575 volt
(30-40 HP), Optional 208/230 volt for 30-40HP.
Full voltage magnetic starter with 110 volt controls,
Nema-1 enclosure, ETL listed, UL certified, solid
state control circuit breaker protection and three
phase overload with reset button and phase
protection. Other voltages available.
Protective Devices
Class 20 solid state overload relay, high tempera-
ture and over pressure shut-down switches, and
an anti-restart pressure switch preventing starting
while air compressor is pressurized. ASME safety
relief valve.
*Air End Warranty, 2 years. Extended 5-year Superior Platinum Warranty or NEW Platinum-PLUS Warranty available with purchase of genuine Sullivan-Palatek parts and fluids.
Description, Specifications and Pictures represented in this brochure may vary from actual equipment purchased.
Lube Fill & Level Elbow
One piece lube fill elbow
and level sight glass.
Vented cap for pressure
release when removing.
Air Intake Filter
Oversized dry type.
Primary and secondary
element. Easily replaced.
Inlet/Check Valve
One piece housing for
dependable performance
and complete modulation
control.
Coupling & Drive
Compressor is flange
mounted to motor C-face for
positive alignment and direct
drive. The coupling element
has a 1 year warranty.*
Separator Tank
ASME coded 200PSIG tank, safety relief
valve, minimum pressure/check valve,
high efficiency replaceable air/lube
separator element and oil
return flow sight glass.
“The Ultimate Performance R
76. Controls
Full modulation, solenoid controlled for smooth
transition to lowest possible no load power.
Automatic start/stop or constant speed selector
switch. Timed dual control.
Instrumentation
Line pressure gauge, discharge pressure gauge,
hour meter, temperature gauge, lube filter and
separator element differential gauges.
Acoustical Enclosure (optional)
Easy removable panels for faster
maintenance and accessibility. Inlet
cooling air filter replaceable element
for clean quiet performance.
Elevated Platform (optional)
19” High, for easy maintenance.
Microprocessor (optional)
Easy to read output, English is standard,
French and Spanish languages available.
Tank Mounted (optional)
ASME coded 120, 200 and
240 gallon air receivers
are readily available.
Rotary Screw Air Compressor”
15D 20D 25D 25D4 30D7 40D
125 psi 55 80 110 95 115 166
150 psi 54 78 95 95 110 115
175 psi N/A 53 80 N/A 105 110
Capacity
Water Cooled
Option Available