1. CURRICULUM VITAE
RANJITH KUMAR.S
FS Eng (TÜV Rheinland, #13045/ 16, Safety
Instrumented Systems)
Block 174D,Edgedale plains # 04-197,
Singapore-820168
Cell No:-91884672
E-Mail: ranjith.kumar03@gmail.com
OBJECTIVE:
Looking for a challenging career in the field of Industrial automation & Instrumentation in a
progressive organization where I can develop my technical skills and contribute it resourcefully
towards the growth of the organization.
PROFESSIONAL EXPERIENCE:
Working for Invensys Singapore as Project Application Engineer 2 (Triconex) till date
PREVIOUS EXPERIENCE:
• Worked for Wartsila Singapore as Design Engineer Automation July 2011 to May 2012
• Worked for Cognizant Technology Solution , Executing projects for Invensys Development
centre) July 2009 to July 2011
• Worked for ABB India as Project Engineer , Executing projects for China ABB(Beijing
Metals Divison.) Jan 2006 to July 2009
• Worked for STTAR Engineering Services (System Integrator for Modicon PLC’s), as a
Project Engineer in the Department of Control systems (June 2005 to Dec 2005).
• Worked for PMA Controls India ltd as Testing Engineer (Jan 2005 to May 2005).
• Worked for Proteck Machinery Private Ltd (April 2004 to Sept 2004).
JOB RESPONSIBILITIES
• Automation System design – Hardware and software Tricon Safety PLC Systems.
• Cabinet Design for System Marshalling Cabinet , IO Assingment ,IO Termination List
• ISA Logic Diagram Preparation for Safety Shutdown Systems. Burner Management Systems
• IO Testing for Turbine machinery system
• Conducting FAT , IAT
• Loop checking
• Triconex Safety Logic Preparation
• Acquaint with new devices for design inputs
• Perform design, test engineering systems, and assist team members
• Loop Templates Creation
• Generating Loop Drawing
SELECTED ACHIVEMENTS:
• Automation of Triconex ,Trident Safety PLC Hardware and Software Engineering
• Integration Of IA Infusion DCS with Tricon and Trident Safety PLC
• Set Up and Installation of IA Infusion DCS
• Creating Wonderware SCADA Face Plate and Symbols

2. • Successfully performed Installation and commissioning of Jisco Cold annealing line Using
800 XA DCS
• Successfully performed Installation and commissioning of Remote Container Tracking
System Using Premium , Micro PLC’s and Saterm Radio Modem
• Handling Level 1 and Level 2 Communication for Automation, OPC, DDE, Profibus ,
Modbus
• FAT, SAT, Loop Testing, Automation Network Layout
• Conducting integration testing on the hardware and software.
EXPERIENCE PROFILE:
• Programming Software : PL7 Pro, Codesys, Control Builder M, Simatic Step
7,Tristation,IACC Configurator,C
• Fire & Gas : Novec System Sotware for Pipe Sizing and
FluidFlow Calculation
• Over Speed Detection system : Protek (WOODWARD)
• DCS : ABBDCS-800XASystem,Infusion DCS,PCS-7.
• PLC’s : Modicon , ABB , Seimens ,Allenbradely, Triconex.
• SCADA : PCIM , WINCC ,Wonderware , InTouch,Iconics
• HMI : Modicon(Magelis),ABB PP210
• Drives : ACS 800 Drives
• Equipments Handled : AEG Thyristors , PMA Controllers
PMA Transmitters , Gatner DAC System
Radio Modems (Satel Communications)
Elecon Energy Meter
• Protocols : Modbus, Profibus DP, I2C, SPI, CAN.
• Languages : C , Embedded C,C# on .NET 3.5.
CERTIFICATIONS:
• FS Eng (TÜV Rheinland, #13045/ 16, Safety Instrumented
Systems)
• Tricon Saftey PLC from Invensys Singapore
• Delta V Fischer Rosemount D.C.S From Prolific Systems (08-12-
2003 to 13-12-2003).
• PLC , SCADA Automation Certification from TechnoCrat (5-
Feb-2004 to 26-03-2004).
• Embedded System Programming From Anna University (07-10-
2004 to 17-01-2005).
• 800 XA DCS Certification.
• PILZ Safety PLC Training from PILZ.
• CEH.
• C,C++,C# From NIIT.
• CCNA From IIHT.

3. • Microsoft Project 2003 From Cognizant
• QTP Training From Cognizant
P R O J E C T S
PROJECT : 1 Invensys Singapore Pte Ltd
JSC PROJECT (RUSSIA)
• Automation System design – Hardware and software Tricon Safety PLC Systems.
• Generation of system cabinet , Analog marshalling Cabinet , Digital Marshalling Cabinet,
MPS / OSTM Cabinet , Network Architecture
• Generation of IO Assingment , Termination List , Functional Design Specification
• Perform design, test engineering systems, and assist team members
• Loop Templates Creation
• Hardware Loop Testing for Turbine Machinery control
PROJECT : 2 Invensys Singapore Pte Ltd
MAADEN AMMONIA PROJECT (SAUDI ARABIA)
• Automation System design – Hardware and software Tricon Safety PLC Systems.
• Generation of system cabinet , Analog marshalling Cabinet , Digital Marshalling Cabinet,
MPS / OSTM Cabinet , Network Architecture
• Generation of IO Assingment , Termination List , Functional Design Specification
• Perform design, test engineering systems, and assist team members
• Loop Templates Creation
• Hardware Loop Testing for Turbine Machinery control
PROJECT : 3 Invensys Singapore Pte Ltd
LAKE CHARLES CHEMICAL PROJECT (USA) Cracked Gas Compressor , C3
Refrigerant Compressor , C2 Refrigerant / Heat Pump Compressor
• Automation System design – Hardware and software Tricon Safety PLC Systems.
• Generation of system cabinet , Analog marshalling Cabinet , Digital Marshalling Cabinet,
MPS / OSTM Cabinet , Network Architecture
• Generation of IO Assingment , Termination List , Functional Design Specification
• Perform design, test engineering systems, and assist team members
• Loop Templates Creation
• Hardware Loop Testing for Turbine Machinery control
PROJECT : 4 Invensys Singapore Pte Ltd

4. PETRONAS FERTLIZER (SABAH AMMONIA UREA) ( MALAYSIA) , Process Air
Compressor , Synthesis Gas Compressor , Ammonia Refrigeration Compressor , CO2
Compressor
• Automation System design – Hardware and software Tricon Safety PLC Systems.
• Conducting FAT , IFAT
• Generation of system cabinet , Analog marshalling Cabinet , Digital Marshalling Cabinet,
MPS / OSTM Cabinet , Network Architecture
• Perform design, test engineering systems, and assist team members
• Loop Templates Creation
• Generating Loop Drawing
• Hardware Loop Testing for Turbine Machinery control
• Generation and Submission of AS Built Drawing.
PROJECT : 5 Invensys Singapore Pte Ltd
ESD , BMS System Petron Oil and Gas (PHILIPINES) ( EPC Daelim )
• Automation System design – Hardware and software Tricon Safety PLC Systems.
• ISA Logic Diagram Preparation for Safety Shutdown Systems,Burner Management Systems
• Preparation of Cause and Effect Logic in Tristation.
• Conducting FAT , IAT
• Triconex Safety Logic Preparation
• Acquaint with new devices for design inputs
• Perform design, test engineering systems, and assist team members
• Loop Templates Creation
• Generating Loop Drawing
• Hardware Loop Testing for Turbine Machinery control
PROJECT : 6 Wartsilla Singapore Pte Ltd
Automation of Helipad Valves
• Create Electrical wiring diagram for the Valves
• Hardware Engineering
• Create Relay Circuit for Auto Opening and Closing
• Generating Fault logic
• Power Cable Sizing
PROJECT : 7 Wartsilla Singapore Pte Ltd
Design Fire and Gas System (Novec) JASCON 18 Ship
• Novec Fluid Flow Calcultaion using Novec Software
• Automation System design – Hardware and software
• Novec Fire and Gas Systems Design
• Sizing of Pipes using Novec software
• Nozzle Sizing using Novec Software
• Creating Wiring Diagram for Cylinder and Nozzle activation
• Develop process design and documentation as per requirements
• Co-ordinate with Senior Engineers for design review
• Acquaint with new devices for design inputs
• Making Necessary Changes In Autocad Drawing as per Design Changes

5. PROJECT : 8 Invensys Development Centre /Cognizant Technology
Testing Of IA Series Infusion View 2 SCADA(Maseriti DCS)
• Understanding the System Requirement Specification and the Feasablity
• Creating Test Documentation for IA Series Infusion View 2 SCADA Based on UCD
• Set Up Creation and Installation of IA Infusion DCS
• Creating Wonderware SCADA Face Plate and Symbols
• Associating Faceplate and Symbols to Strategies and Online Simulation with FCP270
• SetUp Installation and Testing Of IEW Infusion View 2 Software
• Deploying Outputs to Wonderware SCADA
• Providing Detailed Support For the Software Engineers In Automation Domain
• Testing of IEW for the Functionality /Black Box Testing
• Creating TRR
• Creating Detailed Test Report
PROJECT : 9 Invensys Development Centre /Cognizant Technology
Testing Of Invensys Engineering Work Bench 3.1 Enhancement
• Understanding the System Requirement Specification and the Feasablity
• Creating Test Documentation for Invensys Engineering WorkBench 3.1
• Automation of Cause and Effect Matrix For Triconex Safety PLC and INFUSION DCS
• Automation of Infusion DCS and Triconex Interface
• Automation of Infusion DCS and Tristation Software Engineering and Hard Ware Engineering
• Providing Detailed Support For the Software Engineers In Automation Domain
• Testing of IEW for the Functionality /Black Box Testing
• Creating TRR
• Creating Detailed Test Report
PROJECT : 10 Invensys Development Centre /Cognizant Technology
Testing Of Invensys Engineering Work Bench 3.0
• Understanding the System Requirement Specification and the Feasablity
• Creating Test Documentation for Invensys Engineering Workbench3.0
• Automation of Cause and Effect Matrix For Triconex Safety PLC and INFUSION DCS
• Automation of Infusion DCS and Triconex Interface
• Automation of Infusion DCS and Tristation Software Engineering and Hard Ware Engineering
• Providing Detailed Support For the Software Engineers In Automation Domain
• Testing of IEW for the Functionality /Black Box Testing
• Creating TRR
• Creating Detailed Test Report
PROJECT : 11 Invensys Development Centre /Cognizant Technology
Testing Of Invensys Engineering Work Bench 2.0
• Understanding the System Requirement Specification and the Feasablity
• Creating Test Documentation
• Testing Of Automated Software workflow for IEW
• Providing Detailed Support For the Software Engineers In Automation Domain
• Testing of IEW Modules for the Functionality /Black Box Testing

6. • Creating Detailed Test Report
PROJECT : 12 ABB INCRC
Testing of PLC and OPC Server Testing for High Availability
• Performing tests on the newly developed CodeSys OPC server and AC500 Utility Library.
• Designing the TestLab ,Installing Systems, PLC’s and Network Setups
• Setting Up Test Lab for AC500 PLC’s
• Testing of Newly Developed High Availablity Function for AC500 PLC’S
• Testing Of Newly Developed CodeSys OPC Server DA and Alarm and Event Functions
• Monitoring the developed system using Dijivis, SCADA.
• Testing Of Dijivis SCADA Faceplate’s
PROJECT : 13 Shanghai CAPL
• Creating the Domain Group
• Setting up the 800 XA DCS System
• Programming CAPL Entry Section Hydraulic Sequence
• Programming Coil Car Movement Sequence
• Programming Strip Head and Tail Positioning Sequence
PROJECT : 14 Bhaushin Steel
• Control Panel Designing
• Generating Control Panel Wiring Distribution
• Generating Remote IO Panel Wiring
• Generating Field Equipments Wiring to Remote IO Panel
PROJECT : 15 Shanghai CAPL
• Control Panel Designing
• Generating Control Panel Wiring Distribution
• Generating Remote IO Panel Wiring
PROJECT : 16 Jisco CAPL
• Generating Field Equipments Wiring to Remote IO Panel.
• Creating Domains For Setting Up 800 XA DCS
• Installation of ABB DCS 800 XA system. In the Created Domain
• Programming Entry Section Auxiliary Sequence
• 800 XA Graphics Pages and HMI Screen Development
• Performing Integration Tests to The systems
• Installation and Commissioning of 800 XA DCS
• Establishing Ethernet Network and Optical Fibre Communication, Profibus Communication as per
Network Layout
• Establishing Communication with GUILD Welding Machine and EMG CPC
• Loss Compensation for ACS 800 Multi Bus Drives
• Commissioning of Control Panels .Loop Checking
• Commissioning of Hydraulic Section Sequence and Entry Section Auxillaries Movements
• Commissioning of Coil Car Sequence

7. • Enhancement of Strip Positioning and Strip Movement Sequence for Entry and Exit Section
• Commissioning of Process Section Strip Movement
• Maintenance , Guarantee Test and FAT
PROJECT : 17 Shanghai HAPL
• Creating the Domain Group
• Setting up the 800 XA DCS System
• Programming HAPL Process Section Using Control Module , Function Module and SFC
• Performing Integration Test for 800 XA DCS With Profibus Device’s ,Safety PLC’s
• Programming Entry Section Auxillaries ,Coil Car Movement and Hydraulic Sequence
• 800 XA Graphic Screen Creation and Deployment
PROJECT : 18 Shanghai HAPL
• Control Panel Designing
• Generating Control Panel Wiring Distribution
• Generating Remote IO Panel Wiring
• Generating Field Equipments Wiring to Remote IO Panel
PROJECT : 19 AS Shipping Agencies
• Designing Control Panels for PLC’s and IO’s
• Programming Premium and Micro PLC,Using Function Module and Gracefet Languages
• PCIM SCADA Pages and Magelis HMI Pages Creation
• Establishing RS 485 Communication Between PLC’s and Radio Modems . ModBus on Ethernet
Communication for PLC and SCADA
• Integration Test for The system
• Performing tests and implementation of the developed module
• Installation and Commissioning of PLC Control Panels and The Wireless Communication Set Up
EDUCATION:-
1 Completed Bachelor of Engineering (B.E.) - Instrumentation and Control in October 2002
score 61% aggregate.
2 Passed Higher Secondary Examination in March 98 score 67%.
3 Passed 10TH
in March 96 score 68%.
UNIVERSITY:-
Madras University,
PERSONAL PROFILE:-
1. Fathers name : N.SIVASANKAR PILLAI.
2. Date of birth : 02-06-1980
3. Age : 30 years.
4. Sex : Male.
5. Nationality : Indian.

8. 6. Marital status : Married.
7. Languages known : Hindi , English , Malayalam, Tamil , Japanese Basic, German Basic
DECLARATION:-
I hereby declare that the above-mentioned facts are true to the extent of my knowledge and
conscience.
DATE:-
STATION:- CHENNAI S.RANJITH KUMAR