Qualir Automobile Electronics Co., LTD, founded in 1998, aims to create automobile owners's drive more quickly and cosily by providing automobile electronics of Good quality and Reliability. In May 1998, Qualir started to create and generate Car CD, VCD Players and property CD,DVD Players. In March 2003, Qualir began to develop and create Automobile Mp3 players,Car DVD Players,and effectively developed Auto DVD Players with Built-in GPS function in 2004. In June 2007, Qualir made the decision to create a platform for direct wholesale of Auto electronics. In September 2007, Qualir's wholesale Dept was successfully founded and our on the internet wholesale shop www.AutoDVDGPS.com was lastly completed.
1. How to Remove Car Stereo?
by qualir - http://www.autodvdgps.com/blog reply-pdf@qualir-mail.com
date:2011-11-15
How to Remove Car Stereo?
2011-06-20 08:26:49 By qualir
To remove and repair some car parts and accessories seems hard for some people. Actually it’s not so hard as
someone said if you study on this. The process is very simple in some case. For example, to remove a car stereo
is very easy. No matter you want repair a car stereo or replace it with a new one, remove a car stereo is
something you could do it on your own. You could do this without any help of any professional and technicians.
And you could save the expenditure.
The following are the steps of car stereo removal. It could tell you how to remove a car stereo which is installed
with clips, and is held in place with screws.
Some cars come with stereos mounted on four small clips. The procedure of removing this kind of car stereo is
simple and could be completed in few minutes.
Invest in DIN tools, especially for car stereo removal, to removal a car stereo mounted on clips.
The u-shaped tools have some poles that can be inserted in the clips stereo.
Upon inserting them, you will hear a “click”, and the stereo are able to remove easily.
The cable of the antenna is now being unscrewed, which is at the far end, close to the passenger side.
Now break the wiring harness connector at the back of the stereo, that holds all the wires connected to the
stereo, held in place by a wiring clip. These can be connected to the new car stereo.
There is another kind of car stereo, named bolt-on car stereo. It is held in place or bolted by a couple of screws.
This procedure is slightly longer than the previous one, but is still easy.
You might require a flat headed screwdriver for a bolt-on car stereo removal, though this procedure is slightly
longer.
In order to begin car stereo removal, first the face area plate has to be removed, to be able to remove the
screws that keep the stereo in place. To do so, you have to pull the face plate firmly but gently. There are also
certain tools to remove the face plate, which you may invest in, that enable its removal without any damage.
You may also use a make use of a flat head screwdriver to remove the face plate but be careful because you
may end up cracking it in an attempt to remove it.
After removing the face plate, you may be able to locate the screws underneath ash tray or the glove box.
Remove the screws that hold the stereo in place. You may use a magnetic screwdriver to do so, so that the
screws don’t fall and get misplaced. The stereo can now easily be removed.
The cable of the antenna is to be unscrewed, which is at the far end, close to the passenger side.
Now disconnect the wiring harness connector at the back of the stereo, that holds all the wires connected to the
stereo, held in place by a wiring clip. These can be connected to the new car stereo. The car stereo can now be
completely removed.
Original article page link:http://www.autodvdgps.com/blog/qualir-help/how-to-remove-car-stereo/4639/
page 1 / 1
Powered by TCPDF (www.tcpdf.org)