www.proteusind.com: Vortex Flow Meters with Pulse Output - Industrial size vortex flow meters with pulse output are tailor-made and need relevant size for particular applications.
2. When a vortex meter is installed
correctly, the liquid flow calibration
accuracy for saturated flow exceeds a
certain percentage of reading in the most
fundamental pipe sizes.
The operations of the vortex flowmeters
usually occur under the vortex shedding
rule, where a vibrating vortex occurs
when a fluid like water flow past feign
(instead of a streamlined) body.
Highly accurate
3. The capacity of performing difficult
density measurements enable a vortex
flowmeter to offer the direct liquid
flow calibration with no requirement
of an individual mass flow calculator.
The frequency that the vortex is shed
at relies on the shape and the size of
that body. It’s just perfect for the
applications where you give
importance to the low maintenance
cost.
Offers direct liquid flow calibration
4. This can be accomplished by utilizing a
sensor design which improves the
sensitivity of the signal and maximizes
the meter’s operating range. Sensors
are placed behind the bluff body and
are highly protected from water
hammer and pressure shocks.
Industrial size vortex flow meters with
pulse output are tailor-made and need
relevant size for particular applications.
Topnotch vortex flow sensing
5. The loop powered design eases signal
processing and wiring. Alongside, every
vortex meter is factory manufactured and
prepared for usage with authorization.
The inbuilt user interface offers access to
every programming function, with the
inclusion of a complete self-diagnostic
capacity. This ability is considered as a
useful tool to recognize basic installation
issues.
Easy installation and authorization
6. Every vortex flowmeter undergoes
different types of measurements.
Additionally, this meter is also
programmed individually using
particular application info given by
the client.
A vortex flowmeter can be considered
to be one of the best flow calibration
devices which are highly suitable for
liquid flow measurements.
Individual calibration and programming
7. All vortex meters are manufactured with
advanced filtering algorithms. These
algorithms enable the meters to build
constant real-time standards for signal
quality and strength. Unpredictable
changes to the predicted quality or
strength of the incoming signal are refused
as noise. Extra signal processing reduces
the impact of the common mode noise.
This type of noise is often related to the
vibration that occurs in the piping
framework.
Advanced signal processing improves accuracy
8. Proteus Industries Inc.
340 Pioneer Way Mountain View
California USA 94041,
(650) 943-4127
(650) 965-9355
sales@proteusind.com
Technical Support
David Chiasson (650) 943-4111
Mark Malfatti (650) 943-4127
Alex Gahrahmat (650) 943-4158
Customer Service
Wiki Fragio (650) 943-4110
Dana Laing (650) 943-4106
Ruth Ricacho (650) 943-4135
Contact Us