This document provides a high-level overview of a typical installation of the Filtek filtration system. The system uses a mounting bracket to hold both the fuel and oil canisters as well as the Filtek Auto-Oil Dispenser (FAD). Hose connections from the canisters provide fuel and oil to and from the vehicle. The FAD hose must not be higher than the sump level and can be adjusted using visible windows to ensure the correct sump level is maintained. More detailed installation instructions are available in a separate manual.

1. Superior Filtration Solutions
General Information Sheet:
Typical installation - Filtek system
General
This sheet does NOT serve as an installation manual but rather as a high level overview of a
typical approved installation. Each installation may differ due to space constraints and varying
canopy designs.
*NOTE: Once a system has been approved for high volume deployment exact hose lengths for
both the fuel and oil canisters will be provided.
For detailed installation instructions
Please request or download: ‘Installation Manual-Filtek System.PDF’
Typical installation overview
Fuel Canister Oil Canister
Fuel in/out
connections to pump
System mounting
and OEM filter.
Bracket.
Mounts both the
canisters and the
FAD.
Oil in/out connections
from sender unit and
return to sump.
Filtek Auto-oil
dispenser (FAD)
Ball valve for ease in
Bracket must allow removing used oil
for height adjustment when service is due.
to correct sump level.
Adjust to correct FAD hose must NOT
sump level via visible be higher than sump
window. level – always equal
too or below.

2. System Mounting Bracket
FAD – sump level
adjustment slots.
More concepts…
Canisters
Website URL: www.filtek.co
Filtek Industries Limited
Contact email: sales@filtek.co
Ebène House, 3rd Floor, 33 Cybercity,
Contact cell : +27 72 059 9363
Ebène, Mauritius.
+27 83 451 3647