1. GHULAM MUHYUDDIN
Address: AL-Yusuf Building 611 Hamdan Street Abu Dhabi Cell: 050-1412190, 0543206000.
narejogm@gmail.com
________________________________________________________________________________________________________
P R O F E S S I O N A L P R O F I L E
I am a multi-skilled Quality Professional highly organized and efficient in fast-paced multitasking
environments; able to prioritize effectively to accomplish objectives with creativity, enthusiasm & commitment.
With almost 5 years of working experience as a QA/QC Engineer I have had opportunity to work with well
reputed Clients like Abu Dhabi Refinery Takreer, Zakhum Development Company (ZADCO UZ-750
Project) & Petrofac. During my time with those companies I gained comprehensive exposure of Construction,
Fabrication, QA/QC, Inspections, Internal Audits, Final Documents Turnover, Asset Management software and
at the same time being surrounded by top professionals it helped polishing my Leadership and Professional
Skills. I have very good experience of conducting quality inspections as per ITP, participating in Quality Audits
with Clients’ Quality Assurance Teams and have performed Internal Audits during Engineering & construction
Phases to ensure compliance to Project Management System Requirements. Handling Product related Non-
conformances raised by Client/Contractor throughout the project and expediting for close out on timely manner.
Monitoring and measuring the KPIs set at different functions and for different disciplines in the projects.
P R O F E S S I O N A L E X P E R I E N C E
NAEL BIN HARMAL HYDROEXPERT ABU DHABI UAE
Clients: Petrofac & ZADCO
Project: UZ 750 EPC 2 – Island Surface Facilities
Position: QA/QC ENGINEER January 2016 till to date.
 Raising NCRs and follow up their timely closure.
 Conducting inspections as per ITP raising RFIs and Closing them on time.
 Conducting joint inspections with client Quality representatives
 Review of project quality documents like Project Quality Plan, NCR/CAR Procedure, Quality KPI
Dashboard, and Audit schedule, ITPs etc.
 Compilation of Weekly Quality inputs / KPI Inputs received from various Fabrication and
construction subcontractors and prepares Weekly & Monthly Quality reports and KPI dashboard for
timely submission to client.
 Preparation of Final Closeout Documentation (Dossiers).
GULFCOAST ELECTRO-MECHANICL Co. W.L.L. ABU DHABI UAE
Client: Abu Dhabi Refinery TAKREER Division
Position: QA/QC ENGINEER October 2014 to December 2015
Projects: Construction of Contractors’ Laydown Area & Sea Water Intake in EX-CHLORINE
PLANT at Abu Dhabi Refinery TAKREER &
Chemical Injection Facilities for 10 PPM Gas Oil Product at ABU DHABI REFINERY TAKRRER
Chemical Injection Skid for Lubricity & Antistatic Additives.
Process Piping for Gas Oil Product.
Interconnection Piping for Lubricity & Antistatic Injection

2.  Reviewing the QA/QC Plan, ITPs and their preparation.
 Meeting with consultant & client to resolve the issues during the project according to client
requirement, standard & project specification.
 Making schedule for inspection with TPC & Client at site.
 Making of QA/QC team for the area and assigning specific responsibilities according to their
experience & skills.
 Co-ordinate with design department to resolve the design issues.
 Conduct investigation of welding issues & develop solutions to improve current welding methods
techniques & procedures.
 Preparing daily inspection reports, defect marking on welding joints to carry out repairs as per code
and standard requirements.
 Monitoring work performance and taking corrective action to solve any problem rapidly.
 Monitoring welder performance & consumable control system.
 Monitor & witness Hydrotest as per code & specification.
 Carried out Hot Tapping on a 14’’ running line.
Wajedo International Corp. (Pvt) Ltd Karachi Pakistan January 2012 to September 2014.
Clients: Pakistan Oil Fields
Oil & Gas Development Company Ltd OGDCL Pakistan
Pak-Arab Refinery Limited (PARCO), Pakistan
Projects: 184 Kilometers Crude & Gas Flow lines OGDCL Sinjhoro Field
16”DIA 16 K.M CRUDE OIL PIPLE LINE KORANGI BY PASS KORANGI Karachi Pakistan
10” Diameter KCDF Crude Oil Pipeline of 36 Kilometers Ahmedal to Attock Refinery District Attock
Islamabad Pakistan
Responsibilities:
 Attend all necessary inspections as identified in the approved Inspection and Test Plan (ITP).
 Record and document any and all deviations from the Project Quality Program
 Coordinate with the client representatives to ensure that inspections are carried out
expediently.
 Generate client Requests for Inspection (RFI) where required providing sufficient notice for
Hold, Witness and Inspection points.
 Review the calibration status of any test equipment being utilized on the project ensuring the
equipment is within calibration prior to use.
 Material receiving inspection of pipes, fittings, gasket, flanges, bolts and nuts and pipe
supports.
 Controlling the filler wires and electrodes as per ASME Sec. IIC and
WPS.
 Inspection of weld joint preparation, fit up, alignment & dimensional inspection as per
drawings.
 WQT (Welder qualification test) PQR (and procedure qualification test).

3.  Preparing Hydrotest Packages & Witness Hydrotest.
 Monitor consumable storage, handling, packing and drying temperature as per project
approved procedure.
 Coordinate and Monitoring of Pre heat, Inter pass temperature and inter pass cleaning as per
WPS.
 Witness Radiographic Testing, development of films, interpretation & Report writing.
 Welder qualification test (WQT) and procedure qualification test.
 Assisting in preparation of Inspection Formats, Procedure and QCPs and
Submitting.
 Preparing Weld Maps & Controlling the welding joints as per Isometric Drawings.
 Preparing daily, weekly & Monthly Inspection/Quality Reports to Client.
A C A D E M I C B A C K G R O U N D
Mehran University of Engineering & Technology Jamshoro Sindh Pakistan
Masters of Engineering in Metallurgy & Materials 2012-2013 (Course Work Completed) (EVENING
Program) GPA: 3.7/4.0
Mehran University of Engineering & Technology Jamshoro Sindh Pakistan
Bachelor of Engineering in Metallurgy & Materials 2008-2011 GPA: 3.48/4.0
Institute of Business Administration Pakistan
One Month Course on Principles of Management
PROFESSIONAL CERTIFICATIONS & TRAININGS
 Completed Project Management Processional Training (PMP) from Cambridge Institute Abu
Dhabi.
 Attended Training of ISO 9001-2008 from TUV Austria in Pakistan.
 Attended TAK-SPIR Documentation training course at Abu Dhabi Refinery Takreer.
 Attended training for MAXIMO at Abu Dhabi Refinery Takreer an Asset Management
Software widely used in ADNOC Group Companies.
 Completed Offshore Petroleum Industry Training (OPITO) Emirates Technical & Safety
Development Centre
 CSWIP 3.1 - Welding Inspector - Level 2[Certificate No. 82733 (Expiry: 05-12-2018)]
 Ultrasonic Testing Level-2 certification from Velosi Integrity & Safety Pakistan.
 Dye Penetrant Testing Level- 2 from Velosi Integrity & Safety Pakistan.
 Magnetic Particle Inspection Level-2 from Velosi Integrity & Safety Pakistan.
 Attended Permit to Work Training course at Abu Dhabi Refinery Takreer.
 Understanding of Codes like ASME SECTION- IX, ASME SECTION VIII, ASME
SECTION V, ASME B31.3, API -1104 & ASME B16.5 etc.

4. A D D I T I O N A L S K I L L S
 Excellent Communication & Presentation Skills.
 Excellent knowledge of computer applications including MS Office, Windows XP, Window
7 & Windows 8 Applications.
 Very good planning and coordination skills.
 Excellent fluency in English, Urdu and Sindhi (oral, written and Presentation).

C O N F E R E N C E S & W O R K S H O P S A T T E N D E D
 One week Workshop on Vacuum Sciences & Technology organized by National Institute of
Vacuum Sciences & Technology Islamabad Pakistan.
 Attended 5 days International Symposium on Advanced Materials organized by National Centre
for Physics Islamabad.
 International Conference on Energy Environment and Sustainable Development 2012 organized
by Energy & Environment Research Group.
 One week Course on MATLAB Programming 2013 from MUET Jamshoro.
 One week short course on Understanding the Applications of Autocad2006-2D in Drafting &
Designing.
A W A R D S A N D H O N O R S
 First position in Second Intra-Department Quiz/Presentation Competition (2011) at Mehran
University of Engineering & Technology Jamshoro, Pakistan.
 1st
division with distinction throughout the academic career.
 Worked as a President of Mehranian Materials Advantage Chapter (MMAC) from January 2011
to December 2012.
 Received 4 times meritorious scholarship from University.
 Was a permanent member of University’s Debating Society where I participated in many
Debating & Declamation Contests.
R E F E R E N C E S
Mr. Mariano Roque Sengha (Senior Project Coordinator)
Abu Dhabi Refinery TKREER Division
Cell: 050-3243781 Email: mrs9999@takreer.com