Elcometer 6910-3 setaflash series3 active cool offers the same features as the Elcometer 6910/1 Setaflash but is fitted with a cup suitable for testing corrosive samples supplied in india by Multilab Chennai Product Description: Flash Point is defined as “the lowest temperature of a liquid at which its vapours will form a combustible mixture with air”. It is a convenient and reliable classification of the “flammability” of many substances. Open Cup tests simulate an un-contained condition, for example a spillage. Closed Cup tests simulate an enclosed environment, for example storage in a tank or sealed container and are usually specified due to improved precision. Measuring Flash Point Most industries need to test the Flash Point of raw materials, products or waste to ensure: Product quality - as a measure of consistency and performance comparison Compliance testing - to test safety classification for handling, storage, transport and waste In-service analysis - tests on in-use oils and other substances for contamination / adulteration General safety - to evaluate hazard potential Specifications - to check conformance The Setaflash Series 3 Active-Cool Tester offers the same features as the Elcometer 6910/1 Setaflash but is fitted with a cup suitable for testing corrosive samples. It has been designed to carry out Flash/No Flash tests rapidly and efficiently to determine the Flash Point of liquids and semi-solids in the 10°C to 130°C (50°F to 266°F) temperature range. Flash Point is automatically detected using a thermally activated detector,reducing the risk of operator error and minimising the potential danger of inhaling fumes during a test. A rechargeable gas tank with On/Off switch and fine adjustment are integral to the unit. Supplied with a 2ml (0.067fl oz) syringe and ignitor. Features: Flash Point test in less than 2 minutes Small sample size - 2ml (0.067 fl oz) or 4ml (0.135 fl oz) Electronic Peltier cooling effect °C or °F display Certificate available Certificate of Calibration: issued for Fixed Calibration equipment and shows readings and traceability. Packing List Elcometer 6910 Setaflash Series 3 active-cool closed cup tester, 2ml (0.067fl oz) syringe, gas canister and ignitor, silicone rubber tubing for gas canister to gas jet connection, silicone sample well ‘O’ ring seal for cup/lid (red coloured), viton sample well ‘O’ ring seal for cup/lid (black coloured), mains power cable, automatic flash detector probe, Series 3 manuals (on CD) and operating instructions Can be used in accordance with: ASTMD 1655, ASTMD 3278, ASTMD 3828, ASTMD 3934, ASTME 502, BS 3900-A11, BS3900-A13 BS 3900- A14, BS 6664-4, BS 6664-4, EN 456, ISO 3679, ISO 3680 Standards in grey have been superseded but are still recognised in some industries

1. data sheet
Elcometer 6910 Setaflash “Series 3” Active-Cool Tester
with Corrosion Resistant Cup
The Elcometer 6910 Setaflash “Series 3”
Active-Cool Tester has been designed to
rapidly and efficiently carry out Flash /
No Flash tests to determine the flash
point of liquids and semi-solids in the 10
to 130°C (50 to 266°F) temperature
range.
Elcometer 6910 Setaflash
“Series 3” Active-Cool Tester
At a glance:
Ease of operation with
minimum skill required.
Suitable for testing corrosive
samples
Digital Display.
Rechargeable gas tank.
Can be used in accordance with:
ASTM D 3278
ISO 3679
Features include:
Extended operating temperature
range:
Determine the flash point of liquids
and semi-solids in the 10 to 130°C
(50 to 266°F) temperature range.
Precise and safe:
Thermally activated to detect
flashpoint and reduce risk of inhaling
fumes and operator error.
ASTM D 3828
BS 3900 Part A13
It is fitted with a cup suitable for testing
corrosive samples and a rechargeable
gas tank with on/off switch and fine
adjustment is integral to the unit.
Flash Point
When developing any solvent
based liquids such as coatings
or perfumes, it is imperative
that you determine the
flashpoint to meet the stringent
regulations laid down by most
governments around the world
and declare it on the material
safety data sheet.
ISO 3680
UN Class 3 Non-viscious flammable
liquids
Portable:
Lightweight and compact design can
easily be carried.
Versatile:
Wide temperature range for most
applications.
Small sample size:
Requires only 2 or 4ml of sample,
including corrosive samples.
www.elcometer.com
Elcometer Flashpoint
V1: 26.02.08
1/2

2. data sheet
Voltage
115/220V (switchable)
Sample Size
2ml for flash points up to 100ºC (212ºF)
4ml for flash points between 100ºC to 300ºC (212ºF to 572ºF)
Test Time
1 to 99 minutes
Default Values
1 minute for flash points up to 100ºC (212ºF)
2 minutes for flash points between 100ºC to 300ºC (212ºF to 572ºF)
Cup Material
Corrosion Resisting Steel
Dimensions
25.6 x 28 x 25.6cm (10.08 x 11.02 x 10.8”)
Weight
5kg (11lb)
Packing List
Elcometer 6910 “Series 3” Active-Cool, 2ml syringe, gas canister
and igniter, silicone rubber tubing for gas canister to gas jet
connection, silicone sample well “O” ring seal for cup/lid (red
coloured), viton sample well “O” ring seal for cup/lid (black
coloured), mains powder cable, automatic flash detector probe and
operating instructions
ENGLAND
Elcometer Ltd
Edge Lane
Manchester M43 6BU
Part Numbers
K0006910M013
Elcometer 6910 Setaflash “Series 3”
Active-Cool with Corrosion Resistant Cup, 220V
K0UK6910M013
Elcometer 6910 Setaflash “Series 3”
Active-Cool with Corrosion Resistant Cup, 240V
K0US6910M013
Elcometer 6910 Setaflash “Series 3”
Active-Cool with Corrosion Resistant Cup, 110V
Related Products
Elcometer 6910 Setaflash
“Series 3” Closed Cup Tester
Elcometer 6910 Setaflash “Series 3”
Closed Cup Tester
Combining the latest design
standards with the highly successful
Setaflash Tester, the new Setaflash
Series 3 offers the fastest and most
accurate flash point instrument at a
cost effective price.
Elcometer 6910 Setaflash “Series 3”
Open Cup Tester
Certain substances classified as
Flammable by Closed Cup Flash
Point Testing may be reclassified as
non-flammable by combustibility
testing. This has significant potential
cost implications for the packaging
storage and shipping of many
materials.
Elcometer 6910 Setaflash
“Series 3” Open Cup Tester
Tel: +44 (0)161 371 6000
Fax: +44 (0)161 371 6010
e-mail: sales@elcometer.com
www.elcometer.com
USA
Elcometer Inc
1893 Rochester Industrial Drive
Rochester Hills Michigan 48309
Tel: +1 248 650 0500
Toll Free: 800 521 0635
Fax: +1 248 650 0501
e-mail: inc@elcometer.com
www.elcometer.com
CANADA
Elcometer Ltd
PO Box 622, 401 Ouelette Avenue
Windsor, Ontario N9A 6N4
Tel: +1 248 650 0500
Toll Free: 800 521 0635
Fax: +1 248 650 0501
e-mail: ca_info@elcometer.com
www.elcometer.com
ASIA & THE FAR EAST
Elcometer (Asia) Pte Ltd
896 Dunearn Rd
Sime Darby Centre #3-09
Singapore 589472,
Republic of Singapore
Tel: +65 6462 2822
Fax: +65 6462 2860
e-mail: asia@elcometer.com
www.elcometer.com
BELGIUM
Elcometer SA
Rue Vallée 13
B-4681 Hermalle /s Argenteau
Tel: +32 (0)4 379 96 10
Fax: +32 (0)4 374 06 03
e-mail: be_info@elcometer.be
www.elcometer.be
FRANCE
Elcometer Sarl
97 Route de Chécy
45430 BOU
Tel: +33 (0)2 38 86 33 44
Fax: +33 (0)2 38 91 37 66
e-mail: fr_info@elcometer.fr
www.elcometer.fr
GERMANY
Elcometer Instruments GmbH
Ulmer Strasse 68
D-73431 Aalen
Tel: +49 (0)7361 52806 0
Fax: +49 (0)7361 52806 77
e-mail: de_info@elcometer.de
www.elcometer.de
www.elcometer.com
Elcometer Flashpoint
V1: 26.02.08
2/2