1. Page 1 of 3
Mohamed Zaher Ahmed Ismail
Personal Details
Birth Date: May 31th 1988
Gender: Male
Citizenship: Egyptian
Marital Status: Married
Military Status: Exempted
Address El-Salam tamlek Building No. 27- Flat No. 3, Port said , Egypt
Mobile 01009011808 - 01273510033
E-Mail Eng.MZ@hotmail.com
Objective
I`m seeking a good opportunity in the field of Mechanical Power Engineering, to become a member in a
leading company, where I can demonstrate my technical and business skills and access to high position and
enables me to become expert while achieving the corporation’s goals.
Education
Working Experience
 Working in EMC "Egyptian Maintenance Company" @ TCI Sanmar chemicals SAE, Port Said, Egypt
, Since November 2015 till now, as a
Mechanical Maintenance Engineer
TCI Sanmar chemicals has set up fully Petrochemicals complex in Egypt at a cost of 1.15 Billion USD.
TCI Sanmar is a major producer of PVC, Ethylene, EDC, Caustic Soda, Chlorine, and HCL in Egypt.
 My work as Mechanical Maintenance Engineer in PVC, VCM, ZLD, EDC & Incinerator units is
providing high standard plant maintenance service to the client according to O&M agreement, maintain a
high quality of mechanical plant equipment by performing Preventive PM and Predictive PDM
maintenance tasks according to maintenance plan; timely response on any plant operational problem.
 Executing maintenance for different types of pumps (single stage centrifugal pumps,
multistage stage centrifugal pumps, Gear pumps, screw pumps and diaphragm pumps).
 Executing maintenance for VCM liquid Ring compressors.
 Executing maintenance for Air Blowers and Air Compressors.
 Executing maintenance for Gearboxes, Belts, Rotary valves, Mixers, & Screw conveyers.
 Executing maintenance for Centrifuge " Broadbent 12T/HR"
 Working on a Hydro jet Pump "pressure up to 2750 bar" for cleaning Heat Exchangers &
Reactors.
 Support Maintenance Manager in preparing maintenance procedure, check form and
outage planning, advise Maintenance Technicians.
 Port Said University – Faculty of engineering September 2005 - May 2010
 Bachelor of Mechanical Power Engineering
 General grade: Good with Percentage: 72.23 %
 Graduation Project: Study of Swirling Flame Combustion Using Natural Gas
 Graduation Project Grade: Excellent

2. Page 2 of 3
 Working in GPS for TCI Sanmar chemicals SAE, Port Said, Egypt , Since October 2010 till October
2015, as a
Mechanical Engineer
 My work as Mechanical Maintenance Engineer in off-site units is to follow the day to day operation
process of the mechanical equipment , and participate with the maintenance team in any work in the unit
to achieve the best performance of operation and saving time;
 Executing maintenance for Centrifugal pumps with Mechanical seals.
 Executing Periodic maintenance for Screw compressors.
 Executing maintenance for Shell and Tube heat exchangers.
 Executing Alignment using the latest version of Laser alignment.
 Can read the Vibration analysis reports of the different diagnostics problems and perform the
appropriate maintenance.
 I have Operation Experience in Unloading Stations of Ethylene Die Chloride "EDC" and Ethanol.
 Unloading Propylene Iso-tanks to liquefaction system using Reciprocating compressor.
 Commissioning and Starting up Freon "R22" Water and Brine Chillers 360 TR with 3 Screw
compressors.
 My work as A Mechanical construction Engineer in off-site units was to follow the day to day Site work
and prepare the daily productivity reports;
 Planning and executing the construction of Ethylene Boil-Off Gas "BOG" system.
 Commissioning of Vinyl Chloride Monomer "VCM" spheres storage system.
 Modify Piping systems and firefighting systems as per process request.
 Equipment erection such as "Pumps, Compressors, Vessels, and Chillers."
 Using all available drawing such as "Piping Isometrics, P&I Diagram, GAD and GFD".
 Using standards such as "API, ASME, ANSI, ASTM and ISO".
Courses Undertaken
Date :( 13/12/2014 – 21/1/2015)
 Mechanical Engineering Diploma
Oil and Gas Skills Alex. (OGS)
Trained In
o Pumps Operation, Selection Trouble shooting and Maintenance.
o Gas Compressors Operation, Selection Trouble shooting and Maintenance.
o Gas Turbine Operation, Selection Trouble shooting and Maintenance.
o Vibration Monitoring and Analysis for Turbo machinery protection systems.
o Machine Alignment and Balancing Techniques for Turbo machines.
Date :( 6/2/2010 – 6/3/2010)
 PLC Advanced Course (level-1)
Jelecom Egypt, Port Said
Trained In
o Worked and experienced with LG & Siemens PLC units.
o Programming applications using ladder Logic.
Date: (28/6/2009 – 1/10/2009)
 Basics Of Heavy Machine Maintenance
Heavy Machine Training Center (HMTC), 6 October
Trained In
o Learned the basic maintenance of heavy equipment:
(Diesel, Hydraulic, Undercarriage, Automobile electricity and Brief knowledge
of Welding)

3. Page 3 of 3
Date :( 22/6/2008 – 26/6/2008)
 Basic hydraulic
Technology Competency Center (TCC), Cairo
Trained In
o Worked and experienced with hydraulic machines (Strong knowledge in
machine parts such as pumps, valves and circuits)
Training Experience
Date: (9/2/2010 – 13/2/2010)
 Training in (Suez Canal Container Terminal "SCCT")
o Trained on maintenance of hydraulic Equipment and Diesel engines.
Date: (30/8/2008 – 11/9/2008)
 Training in ( International Pipe Industry Company "IPIC")
o Trained in the mills for manufacturing LSAW Carbon Steel Pipes and Hot
Induction Bends.
o Trained on maintenance of hydraulic machines.
Date: (19/7/2008 – 28/8/2008)
 Training in (Suez Canal Authority "water station")
o Trained on maintenance of centrifugal pumps with packing
Summary of Qualifications
Computer Skills:
 Solid Works 3D (Part design, Assembly design, and Drafting).
 AutoCAD (2D, Mechanical and 3D plant).
 ICDL license (Windows, Word, Excel, PowerPoint, outlook, Access).
 Automation studio 5 (pneumatic , hydraulic and automatic control )
 Excellent knowledge of ( Internet application searching and browsing)
 Developed ability to produce all different types of technical reports and presentations to
a professional standard.
Personal Skills:
 Demonstrates the ability to plan and prioritize workload in order to meet required
deadlines and performance standards.
 Familiar with planned and preventive maintenance.
 Problem solving in highly production based environment.
 Effective communication skills that allows the individual to communicate internally and
externally, at all levels.
 Able to pass on knowledge to other team members and apprentices
 Self-Motivated, Decision making & Working under stress.
 Strong team working and Leadership.
Languages
Arabic  Native language
English  Very good at writing , reading and conversation
References
I assume that the contents above in my Resume are true and correct to my best of Knowledge.
"All references are available upon request"