This study guide is intended to provide those pursuing the CCNA certification with a framework of what concepts need to be studied. This is not a comprehensive document containing all the secrets of the CCNA, nor is it a “braindump” of questions and answers.
I sincerely hope that this document provides some assistance and clarity in your studies.
3. Console Connectivity
•
Connect a rollover cable to the router console port
(RJ-45 connector).
•
Connect the other end of the rollover cable to the
RJ-45 to DB-9 converter
•
Attach the female DB-9 converter to a PC Serial Port.
•
Open emulation software on the PC.
3
4. Emulation Software
WINDOWS
•
Start Programs Accessories Communications
HyperTerminal HyperTerminal.
•
Give the Connection Name & Select Any Icon
•
Select Serial (Com) Port where Router is Connected.
•
In Port Settings Click on Restore Defaults
LINUX
•
# minicom -s
4
19. System Bootstrap, Version 11.0(10c), SOFTWARE
Copyright (c) 1986-1996 by cisco Systems
2500 processor with 2048 Kbytes of main memory
Notice: NVRAM invalid, possibly due to write erase.
F3: 5575260+78596+410108 at 0x3000060
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
19
20. Cisco Internetwork Operating System Software
IOS(tm) 2500 Software(C2500-P-L),Version 12.1(24),RELEASE SOFTWARE(fc1
Copyright (c) 1986-2002 by cisco Systems, Inc.
Compiled Mon 30-Sep-02 20:43 by srani
Image text-base: 0x0302EA54, data-base: 0x00001000
Cisco 2500(68030)processor(revision N) with 2048K/2048K bytes of memory
Processor board ID 11169613, with hardware revision 00000001
X.25 software, Version 3.0.0.
Basic Rate ISDN software, Version 1.1.
1 Ethernet/IEEE 802.3 interface(s)
2 Serial network interface(s)
1 ISDN Basic Rate interface(s)
32K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read ONLY)
--- System Configuration Dialog --Would you like to enter the initial configuration dialog? [yes/no]: n
20
21. Press RETURN to get started!
00:00:20: %LINK-3-UPDOWN: Interface Ethernet0, changed state to up
00:00:20: %LINK-3-UPDOWN: Interface Serial0, changed state to down
00:00:20: %LINK-3-UPDOWN: Interface Serial1, changed state to down
00:00:21: %LINEPROTO-5-UPDOWN: Line protocol on Interface Ethernet0,
changed state to up
00:00:21: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0,
changed state to down
00:00:21: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1,
changed state to down
00:12:43: %LINK-5-CHANGED: Interface Ethernet0, changed state to
administratively down
00:12:43: %LINK-5-CHANGED: Interface Serial0, changed state to
administratively down
00:12:43: %LINK-5-CHANGED: Interface Serial1, changed state to
administratively down
00:12:44: %LINEPROTO-5-UPDOWN: Line protocol on Interface Ethernet0,
changed state to down
00:12:46: %SYS-5-RESTART: System restarted
21
22. Cisco Internetwork Operating System Software
IOS(tm) 2500 Software(C2500-P-L),Version 12.1(24),RELEASE SOFTWARE(fc1
Copyright (c) 1986-2002 by cisco Systems, Inc.
Compiled Mon 30-Sep-02 20:43Usersrani
by
UserMode
Mode
Router> enable
Privileged Mode
: Privileged Mode
Commands :
Router# show running-config ::Commands :: enable
ping, telnet, traceroute, enable
:Commands :
Commands
ping, telnet, traceroute,
Building configuration .....
show, copy, write, reload,
show, copy, write, reload,
Current configuration:
configure terminal
configure terminal
!
version 12.1
no service password-encryption
no service udp-small-servers
no service tcp-small-servers
!
hostname Router
!
interface Ethernet0
no ip address
shutdown
--More--
22
23. interface Serial0
no ip address
shutdown
!
interface Serial1
no ip address
shutdown
!
no ip classless
!
!
line con 0
line aux 0
line vty 0 4
login
!
end
Router# show startup-config
% Non-volatile configuration memory has not been set up or bad checksum
Router#
23
24. Router# show flash
System flash directory:
File Length
Name/status
1
8108960 /c2500-ipx-ip.bin
[8109024 bytes used, 8668192 available, 16777216 total]
16384K bytes of processor board System flash (Read ONLY)
Router# show version
Cisco Internetwork Operating System Software
IOS (tm) 2500 Software (C2500-JS-L),Version 12.1(17),RELEASE SOFTWARE
Copyright (c) 1986-1999 by cisco Systems, Inc.
Compiled Mon 04-Jan-99 17:27 by ashah
Image text-base: 0x03040148, data-base: 0x00001000
ROM: System Bootstrap, Version 11.0(10c), SOFTWARE
BOOTFLASH: 3000 Bootstrap Software (IGS-BOOT-R), Version 11.0(10c),
RELEASE SOFTWARE (fc1)
--More--
24
25. Router uptime is 1 hour, 28 minutes
System restarted by power-on
System image file is "flash:/c2500-ipx-ip.bin", booted via flash
Cisco 2500(68030)processor(revision N) with 2048K/2048K bytes of memo
Processor board ID 11169613, with hardware revision 00000001
X.25 software, Version 3.0.0.
Basic Rate ISDN software, Version 1.1.
1 Ethernet/IEEE 802.3 interface(s)
2 Serial network interface(s)
1 ISDN Basic Rate interface(s)
32K bytes of non-volatileGlobal Configuration Mode
configuration memory.
Global Configuration Mode
16384K bytes of processor board :System flash (Read ONLY)
Commands :
: Commands :
hostname, interface,
hostname, interface,
Configuration register enable password, enable secret
is 0x2102
enable password, enable secret
Router# configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)# hostname Hyderabad
Hyderabad(config)#
25
26. Hyderabad(config)# interface ethernet 0
Interface Mode
Interface 255.255.255.0
Hyderabad(config-if)# ip address 192.168.1.150 Mode
::Commands ::
Commands
Hyderabad(config-if)# no shutdown
ip address, no shutdown
Configuring Ethernet shutdown
ip address, no interface
Hyderabad(config-if)# exitConfiguringEthernet interface
Hyderabad(config)# line vty 0 4 interface ethernet <no.>
Router(config)# interface ethernet <no.>
Router(config)#
Hyderabad(config-line)# login
Router(config-if)# ip address <address><mask>
Router(config-if)# ip
Hyderabad(config-line)# password zoomaddress <address><mask>
Router(config-if)# no shutdown
Router(config-if)# Telnet password
Hyderabad(config-line)# exit Settingnoshutdown
Setting Telnet password
Hyderabad(config)# line con 0
Router(config)# line vty 0 4
Router(config)# line vty 0 4
Hyderabad(config-line)# login
Router(config-line)# login
Router(config-line)# login
Hyderabad(config-line)# password ccna
Router(config-line)#Enable password
Setting the Enable
Router(config-line)#password <password>
password <password>
Setting the Console password
Hyderabad(config-line)# exitSettingConsolepassword
Setting
Router(config)#enable con 0
Hyderabad(config)# line aux 0
Router(config)#enablepassword <password>
Router(config)# line con 0
Router(config)# line password <password>
Hyderabad(config-line)# login
Router(config)#enable login <password>
Router(config)#enablesecret <password>
Router(config-line)# login
Router(config-line)# secret
Hyderabad(config-line)# password cisco
Router(config-line)# password <password>
Hyderabad(config-line)# exitSettingAuxilary password
Setting Auxilary password
Router(config-line)# password <password>
Hyderabad(config)# enable password cisco0
Router(config)# line aux
Router(config)# zoom
Hyderabad(config)# enable secret line aux 0
Router(config-line)# login
Hyderabad(config)# ^Z
Router(config-line)# login
Router(config-line)# password <password>
Router(config-line)# password <password>
26
27. Hyderabad# show running-config
Building configuration .....
Current configuration:
!
version 12.1
no service password-encryption
no service udp-small-servers
no service tcp-small-servers
!
hostname Hyderabad
!
enable secret 5 $1$60nw$8XzAJ445GBzx1mgYJTUjo1
enable password cisco
!
interface Ethernet0
ip address 192.168.1.150 255.255.255.0
!
interface Serial0
no ip address
shutdown
--More--
27
28. interface Serial1
no ip address
shutdown
!
no ip classless
!
line con 0
login
password ccna
line aux 0
login
password cisco
line vty 0 4
login
password zoom
!
end
Hyderabad# show startup-config
% Non-volatile configuration memory has not been set up or bad checksum
Hyderabad#
28
29. Hyderabad# copy running-config startup-config
Building configuration .....
[OK]
Hyderabad# show startup-config Configuration
Saving Router Configuration
Saving Router
Building configuration .....
Router#copy running-config startup-config
Router#copy running-config startup-config
Current configuration:
!
version 12.1
no service password-encryption
no service udp-small-servers
no service tcp-small-servers
!
hostname Hyderabad
!
enable secret 5 $1$60nw$8XzAJ445GBzx1mgYJTUjo1
enable password cisco
!
interface Ethernet0
ip address 192.168.1.150 255.255.255.0
--More--
29
30. interface Serial0
no ip address
shutdown
!
interface Serial1
no ip address
shutdown
!
no ip classless
!
line con 0
login
password ccna
line aux 0
login
password cisco
line vty 0 4
login
password zoom
!
end
Hyderabad#
30