The Taco Solar Pumping Station combines all the components needed for a closed loop solar water heating system, including a variable speed circulator, isolation valves, an air eliminator, flow meter, and safety components. The variable speed solar control continually adjusts the circulator speed to maximize solar collector output and improve system performance by 20% by preventing short cycling. The Solar Pumping Station simplifies installation with just 5 connections for the solar collectors, storage tank heat exchanger, and expansion tank.
2. Submittal Data # 101-139 Effective: 10/08/09
Submittal Data Information Supersedes: New
Solar Pumping Station — SPS-PC
Features Variable Speed Pays Big Performance Dividend:
All-in-One Pre-insulated and The variable speed circulator in the Solar Pumping Station continuously
Pre-plumbed Module optimizes the flow through the collector to achieve maximum energy gain.
Ball Valves on Supply and Return with: For example, there is no benefit of pulling 80° water out of the collector when
• Temperature Gauges you are trying to maintain 120° in a tank. If a proper Delta-T is maintained
• Solar Check Valves through the collector then higher source temperatures can be achieved
Flow Meter graduated in GPM over longer periods of time, no matter the weather conditions.
with Integral Balancing Valve
Safety Group: The Solar Pumping Station truly simplifies your closed loop solar water
• Pressure Gauge heating installation. With just a few connections, you install the heart of the
• Pressure Relief Valve system; circulator, solar control and all safety and measurement equipment.
• Expansion Tank Connection
Fill and Purge Valves
Air Eliminator with Manual Vent Pressure relief
Expansion Tank Bracket and Flex Tubing Pressure Gauge
Standard 2-Bolt Flanged Circulator
Variable Speed Solar Differential Control expansion Tank Connection
• Matches Output of Collector
• No Short Cycling of Circulator return Temperature Gauge & shut-off valve
• +20% Increased Performance supply Temperature Gauge & shut-off valve
User Definable Line Voltage
Output, Supports: Air eliminator & Vent
• External Heat Exchanger
• Collector Sink / Dump Variable speed solar Control
• Storage Tank Supplement
standard 2-Bolt Flanged Circulator
• 1 or 2 Storage Tanks
Fill Port Hose Connection
Specifications
Body Construction .........Bronze / Brass Flow Meter in GPM
Insulating Enclosure ..........EPP
Purge Port Hose Connection
Maximum Working Temp.
(Excluding Circulating Pump) .....250˚F (120˚C) union Connections X 3/4” sweat
Short Time ..........................320˚F (160˚C) for
20 Seconds Insulated enclosure
Pressure Relief Setting.........87 PSI (6BAR)
Temperature Gauges ......30-250˚F
(0-120˚C) 008 Variable Speed Solar Circulator
FLOW-M3/H
Pressure Gauges ..............0-145 PSI 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5
..............................................(0-10BAR)
16 5.0
TOTAL HEAD-METERS
Flow Meter .......................0 - 3.25 GPM 4.5
TOTAL HEAD-FEET
14
(0-12 l/min) 12
4.0
3.5
10 3.0
Exp. Tank Connections ......3/4” BSP or NPT 8 2.5
2.0
6
End Connections .............3/4” FM Copper 4
1.5
1.0
Sweat X 1” Union 2 0.5
0 0.0
Unit Dimensions ..............12.1” x 17” x 6.6” 0 2 4 6 8 10 12 14
FLOW-GPM
Shipping Weight ................25 LBS
For Indoor use only
Taco Inc., 1160 Cranston Street. Cranston, RI 02920 / (401) 942-8000 / Fax (401) 942-2360
Taco (Canada) Ltd., 8450 Lawson Road, Unit #3, Milton, Ontario L9T 0J8 / (905) 564-9422 / Fax (905) 564-9436
www.taco-hvac.com