Keval Patil
4
Followers
Personal Information
Beruf
Teacher
Branche
Education
Tags
mumbai university. mechanical engineering sem iii
mechanical engineering
sem iii
mumbai university
motion- periodic
damper models
damper
mass
vibration parameters - springs
causes and effects of vibrations
to convert rigid body in to two mass with and with
turning moment on crank shaft 2.2 dynamically equi
engine force analysis
in slider crank mechanism (neglecting mass of conn
gyroscopic effect due to lateral misalignment of r
permissible speeds on curve paths
rolling and their stabilization. effect of gyrosco
pitching
naval ships during steering
gyroscopic couple and its effect on spinning bodie
governors effort and power 1.2 gyroscope: introduc
performance characteristics of governors
force analysis of governors- porter and hartnell g
mumbai university. mechanical engineering sem v dy
applications and nano composites 6.3 an overview t
examples
synthesis of nanomaterials
concepts
various types of composites and their applications
advantages over metallic materials
processing of composites
material technology module 6 introduction to new m
effect of alloying elements on phase transformatio
effects of major and minor constituents
classification of tool steels and metallurgy of to
alloying elements
significance of alloying elements
induction hardening and flame hardening processes
carbonitriding
cyaniding
nitriding
surface hardening: hardening and surface hardening
maraging and ausforming process
martempering
austempering
subzero treatment
tempering
hardening heat treatment
normalizing
process annealing and cyclic annealing
diffusion annealing
properties and applications of full annealing
annealing- principle process
classification of heat treatment process
influence of carbon in iron- carbon alloying iron-
allotropic forms of iron
importance of iron as engineering material
peritectoid) and their analysis
eutectoid
rev 2016 19 peritectic
b. e. (mechanical engineering)
08 university of mumbai
eutectic
different types of phase diagrams (isomorphous
solidification of pure metal
classification and properties of different types o
definition
properties and applications
their microstructures
nodular and malleable irons
white iron
graphitization of iron- grey iron
cct diagram hardenability concepts and tests
creep resistant materials
analysis of classical creep curve and use of creep
mechanism and types of creep
creep testing and data presentation and analysis
effect of temperature and creep on mechanical beha
creep: definition and significance of creep
thermal fatigue.
corrosion fatigue
effect of pre-stressing
surface effect
notch effect
influence of important factors on fatigue
s-n curve and its interpretation
test data presentation and statistical evolution
fatigue testing
mechanism of fatigue and theories of fatigue failu
definition and significance
ductility transition
fracture toughness
ductile fracture: notch effect on fracture
critical stress and crack propagation velocity for
dislocation theory of fracture
orowan’s modification
brittle fracture: griffith’s theory of fracture
recrystallization annealing: stages of recrystalli
effect of strain hardening on engineering behaviou
strain hardening.
dislocation theory of strain hardening
bcc and hcp lattice systems.
slip systems and deformability of fcc
deformation in single crystal and polycrystalline
critical resolved shear stress
mechanism of deformation and its significance in d
elastic and plastic deformation
conditions of multiplication and significance
frank reed source
generation of dislocation
their significance
sub-angle grain boundary and stacking faults
surface defects - grain boundary
motion of dislocations and their significance
material technology
dislocation - edge and screw dislocations burger’s
mechanical enginnering
their formation and effects
lattice imperfections
interstitial and impurity atom defects
classification and significance of imperfections p
ppt
Mehr anzeigen
- Präsentationen
- Dokumente
- Infografiken