2k-epoxy adhesive for metal bonding of industrial strength. It hardens like steel after mixing epoxy resin and hardener. Can be drilled, tapped, sanded, led. Chemical resistance – for both industrial and private use.
2. K2 METAL BOND is a two-part, fast-
acting epoxy glue for connecting metals
of industrial endurance. The epoxy
resin and hardener harden like steel
after mixing. After complete hardening,
the surface can be drilled, threaded,
grounded, and worked with a file.
Resistant to chemical substances.
Suitable for removing remnants.
Various household, workshop and
industrial use.
Component A
- Hardener
Component B
- Resin
DESCRIPTION
www.K2car.com
3. 1 2 3
4(1) Preparing the surface – clean, dry and degrease elements to be treated.
(2/3) Preparing the epoxy – squeeze a similar amount of both components from the tubes.
The resin (yellow tube) has a light gray colour, the hardener (green tube) – black.
(4) Mix both components with each other to reach uniform, dark gray mixture, ready for use.
Attention! Product at room temperature binds in a couple of minutes, so such an amount of
mixture should be prepared, so as to use it in that time and not allow for drying. The speed
of binding of the glue depends on the temperature of the surroundings – at low
temperatures the glue binds slower, at higher temperatures – quicker.
www.K2car.com
DIRECTIONS
4. 5 6 7
Apply an appropriate amount of glue to the element and squeeze. (5) In case of gluing
flat surfaces it is enough to apply glue to only one surface. (6) The process of gluing
doesn't require constant squeezing of the elements. (7) Both surfacecs should be
connected, squeezed, the excess of glue should be removed, and the elements should be
left to dry.
www.K2car.com
DIRECTIONS
5. The glue hardens in a couple minutes (usually around 4 minutes). This time depends on
the temperature of the surroundings. After hardening the weld may be subject to further
treatment, e.g. grinding, drilling, painting.
www.K2car.com
DIRECTIONS
6. K2 MAGIC BAND
Index: B304
K2 MEGA MIRROR
Glue for rear-view mirror,
works where other glues fall
down. Super strong and
fast. More effective than
epoxidand super glues.
Permanently joins ends of
mirrors. Could be used for
connecting metal/metal,
glass/glass, ceramic,
jewellery and others.
Index: B110
www.K2car.com
RELATED PRODUCTS
Excellent insulating and
sealing tape, perfectly
suitable in emergency
repairs, including various
home repairs, industry and
workshop repairs. Features
unique fast-fusing properties
(bonds to itself in seconds) in
both low and very high
temperature range,
showing an impressive
resistance against frost or
sunlight.
8. Thank you for your interest in our products, in the event of further questions please contact us at sales@melle.com or global@melle.com
Melle Sp. z o. o., Stary Staw 9, 63-400 Ostrów Wlkp. Poland, Europe +48 62 735 16 00, www.K2car.com,
Visit
www.K2car.com
and see how to
make your car as
good as new!
Melle Sp. z o.o. reserves the right to mistakes and errors in the presentation content and is not responsible for the possible consequences of actions taken on the basis of the information
provided in it. Characteristics, specifications, packaging, labeling and/or capacity of the presented product may be subject to change. Current data on the products are available on request
directly from the manufacturer.
Become our
distributor!
For more details
visit
www.K2car.com
CAR LIKE NEW
www.K2car.com