Weitere ähnliche Inhalte Ähnlich wie Chapter1 rev1.0 (20) Chapter1 rev1.01. Services in a
Converged WAN
Accessing the WAN – Chapter 1
ITE I Chapter 6 © 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 1
2. Objectives
Describe how the Cisco Enterprise Composite
Model (ECNM) provides integrated services
over an Enterprise network.
Describe the key WAN technology concepts.
Identify the appropriate WAN technologies to
use when matching ECNM best practices with
typical enterprise requirements for WAN
communications.
ITE 1 Chapter 6 © 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 2
3. 1.1 Providing Integrated
Services to the Enterprise
Accessing the WAN – Chapter 1
ITE I Chapter 6 © 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 3
4. The purpose and function of WANs
ITE 1 Chapter 6 © 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 4
5. The purpose and function of WANs
A WAN is a data communications network that
operates beyond the geographic scope of a LAN.
Characteristics include:
Connect devices that are separated by a broader
geographical area than can be served by a LAN.
Use the services of carriers, such as telephone
companies, cable companies, satellite systems, and
network providers.
Use serial connections of various types to provide
access to bandwidth over large geographic areas.
ITE 1 Chapter 6 © 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 5
6. The Evolving Enterprise Network
•Network requirements of a
company can change
dramatically as the company
grows over time.
ITE 1 Chapter 6 © 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 6
7. The Hierarchical Design Model
Access layer - Grants user access to network devices.
Distribution layer - aggregates WAN connections at the
edge of the campus and provides policy-based connectivity.
Core layer - high-speed backbone that is designed to switch
packets as fast as possible.
ITE 1 Chapter 6 © 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 7
8. Cisco Enterprise Architecture
An architecture
developed by Cisco that
has relevance to the
different stages of
growth of a business.
The Cisco Enterprise Architecture consists of modules
representing focused views that target each place in the network.
Each module has a distinct network infrastructure with services
and network applications that extend across the modules.
ITE 1 Chapter 6 © 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 8
9. Modules in the Enterprise Architecture
•Enterprise Campus Architecture - describes the recommended
methods to create a scalable network, while addressing the
needs of campus-style business operations.
•Enterprise Edge Architecture - enables the enterprise to use
Internet and partner resources, and provide resources for its
customers.
•Enterprise Branch Architecture - allows businesses to extend the
applications and services found at the campus to remote
locations and users or to a small group of branches.
•Enterprise Data Center Architecture – manages and maintains
centralized data systems for the entire enterprise
•Enterprise Teleworker Architecture – connects individual
employees to network resources remotely, typically from home.
ITE 1 Chapter 6 © 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 9
10. 1.2 WAN technology
overview
Accessing the WAN – Chapter 1
ITE I Chapter 6 © 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 10
11. Describe the Key WAN Technology
Concepts
WAN operations focus primarily on Layer 1 and Layer 2.
ITE 1 Chapter 6 © 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 11
12. WAN Physical Layer Terminology
Customer Premises
Equipment
Data
Communications
Equipment
Data Terminal
Equipment
Demarcation Point
ITE 1 Chapter 6 © 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 12
13. WAN Physical Layer Terminology
Customer Premises Equipment - Devices and inside
wiring located at the premises of the subscriber and
connected with a telecommunication channel of a
carrier.
Data Communications Equipment - consists of devices
that put data on the local loop
Data Terminal Equipment - customer devices that pass
the data from a customer network or host computer for
transmission over the WAN.
Demarcation Point - a point established in a building or
complex to separate customer equipment from service
provider equipment.
ITE 1 Chapter 6 © 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 13
14. WAN Physical Layer Terminology
Local loop - the copper or fiber telephone cable that
connects the CPE at the subscriber site to the CO of
the service provider; also called last mile
Central Office - a local service provider facility or
building where local telephone cables link to long-haul,
all-digital, fiber-optic communications lines through a
system of switches and other equipment.
ITE 1 Chapter 6 © 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 14
15. WAN Devices
ITE 1 Chapter 6 © 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 15
16. WAN Devices
Modem - Modulates an analog carrier signal to encode
digital information, and also demodulates the carrier
signal to decode the transmitted information.
CSU/DSU- used on T1 and T3 lines; The CSU
provides termination for the digital signal and ensures
integrity through error correction. The DSU converts
the T-carrier line frames into frames that the LAN can
interpret.
Access Server - concentrates dial-in and dial-out user
communications.
ITE 1 Chapter 6 © 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 16
17. WAN Devices
WAN switch - a multiport internetworking device used
in carrier networks; typically switches traffic like Frame
Relay, ATM, or X.25; operates at the data link layer of
the OSI model
Modem - Modulates an analog carrier signal to encode
digital information, and also demodulates the carrier
signal to decode the transmitted information.
Router- provides internetworking and WAN access
interface ports that are used to connect to the service
provider network.
Core router-A router that resides within the middle or
backbone of the WAN
ITE 1 Chapter 6 © 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 17
18. WAN Physical Layer Standards
ITE 1 Chapter 6 © 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 18
19. WAN Physical Layer Standards
EIA/TIA-232- allows signal speeds of up to 64 kbps on
a 25-pin D-connector over short distances
(RS232/V.24)
EIA/TIA-449/530 - a faster version of EIA/TIA-232. It
uses a 36-pin D-connector and is capable of longer
cable runs.
EIA/TIA-612/613 - Describes the High-Speed Serial
Interface (HSSI) protocol, which provides access to
services up to 52 Mb/s on a 60-pin D-connector.
ITE 1 Chapter 6 © 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 19
20. WAN Physical Layer Standards
V.35 - the ITU-T standard for synchronous
communications between a network access device and
a packet network.
X.21 - an ITU-T standard for synchronous digital
communications. It uses a 15-pin D-connector.
ITE 1 Chapter 6 © 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 20
21. WAN Data Link Layer Standards
ITE 1 Chapter 6 © 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 21
22. WAN Frame Encapsulation Formats
ITE 1 Chapter 6 © 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 22
23. Circuit Switching
Ex: ISDN and
PSTN
A circuit-switched network is one that establishes a
dedicated circuit between nodes and terminals before the
users may communicate.
The internal path taken by the circuit between exchanges
is shared by a number of conversations. Time division
multiplexing (TDM) gives each conversation a share of
the connection in turn.
ITE 1 Chapter 6 © 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 23
25. Packet Switching
Packet switching splits traffic data into packets that are
routed over a shared network.
Packet-switching networks do not require a circuit to be
established, and they allow many pairs of nodes to
communicate over the same channel.
The switches in a packet-switched network determine which
link the packet must be sent on next from the addressing
information in each packet.
Packet-switched networks may establish routes through the
switches for particular end-to-end connections called virtual
circuits. A VC is a logical circuit created within a shared
network between two network devices. Two types of VCs
exist: PVC and SVC (more on Ch. 3)
ITE 1 Chapter 6 © 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 25
26. 1.3 Internet Connection Options
Accessing the WAN – Chapter 1
ITE I Chapter 6 © 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 26
27. Various options for connecting subscribers to the WAN
ITE 1 Chapter 6 © 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 27
28. Leased line
ITE 1 Chapter 6 © 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 28
30. Packet switching options
X25
Frame Relay
ATM
ITE 1 Chapter 6 © 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 30
31. Broadband Services
ADSL
Cable
Wireless (WiMax)
ITE 1 Chapter 6 © 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 31
34. Factors to consider when selecting a WAN
connection
ITE 1 Chapter 6 © 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 34
35. Factors to consider when selecting a WAN
connection (cont.)
ITE 1 Chapter 6 © 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 35
36. Summary
A WAN is defined as
A data communications network that operates beyond the
geographic scope of a LAN
WAN primarily operate on layer 1 & 2 of the OSI model
WAN technologies include
–Leased line
–ISDN
–Frame relay
–X.25
–ATM
ITE 1 Chapter 6 © 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 36
37. Summary
Cisco Enterprise Architecture
–This is an expansion of the hierarchical model that further
divides the enterprise network into
•Physical areas
•Logical areas
•Functional areas
Selecting the appropriate WAN technology requires
considering some of the following:
–WAN’s purpose
–Geographic scope of WAN
–Traffic requirements
–If WAN uses a public or private infrastructure
ITE 1 Chapter 6 © 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 37
38. Next Module
ITE 1 Chapter 6 © 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 38
39. ITE 1 Chapter 6 © 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 39
Hinweis der Redaktion Graphic 1.1.1.1 Graphic 1.1.1.1 Graphic 1.1.2.1 Graphic 1.1.3.2 Graphic 1.1.3.3 Graphic 1.2.1.1 Graphic 1.2.2.1 If space permits add graphics 1.2.2.2 & 1.2.2.3 (if forced to make a choice between the 2 graphic pick 1.2.2.2) Graphic 1.2.3.1 Graphic 1.2.4.1 Alternative graphic can be found at the following URL (not necessary to use – just a thought): http://www.cisco.com/image/jpg/en/us/guest/products/ps6438/c1244/cdccont_0900aecd802c2010_0900aecd802c2010-08.jpg graphic 1.2.4.2 Graphic 1.2.4.1 Alternative graphic can be found at the following URL (not necessary to use – just a thought): http://www.cisco.com/image/jpg/en/us/guest/products/ps6438/c1244/cdccont_0900aecd802c2010_0900aecd802c2010-08.jpg graphic 1.2.4.2 Graphic 1.3.1.1 Graphic 1.3.2.1 Graphics 1.3.3.1 & 1.3.3.2 Graphic 1.3.4.1 Graphic 1.3.4.1 Graphic 1.3.4.1 The objective stated above does not make sense to me. Reword the above objective as follows: List factors to consider when selecting a WAN connection Graphic 1.3.5.4 The objective stated above does not make sense to me. Reword the above objective as follows: List factors to consider when selecting a WAN connection Graphic 1.3.5.4