Buy the Paxton Access 514-326-US at JMAC Supply! https://www.jmac.com/Paxton_Access_514_326_US_p/paxton-access-514-326-us.htm?=slideshare

1. Ins-40081-US Net2 desktop reader USB
Desktop Reader
The desktop reader is designed to sit next to the PC. It is used for adding tokens to a Net2 system and also for
identifying lost cards. Additional workstations can also have desktop readers.
With the Net2 software running, any new token presented above the desktop reader will cause the new user wizard
to appear with the appropriate card number displayed. The users details can then be entered and the token issued.
If the token is already known to the system, the relevant user's record will appear.
Paxton
Part number Description
514-326-US Net2 USB desktop reader
Net2 USB desktop reader – options
Installation This unit is for Indoor use only
Plug the reader into a convenient USB port on the PC with the supplied USB cable.
Stop and then restart the Net2 server program. The device will now be available to the Net2 program.
PAGE 1
Paxton
This unit requires Net2 v3.09 or later software. Support for Mifare cards requires v4.17 or later.
Call Technical Support if you require a software upgrade.
03/01/2010
Technical Support
Technical help is available: Monday - Friday from 02:00 AM - 8:00 PM (EST)
1.800.672.7298 supportUS@paxton-access.com
Documentation on all Paxton products can be found on our web site - http://www.paxton-access.com/
For instructions in alternative languages - http://paxton.info/1000

2. -20 °C ( -4 °F ) +55 °C ( + 131 °F )
5V DC
100 mA
4 1/2 inch 3 inch 3/4 inch
Following the completed installation of this equipment, no further maintenance or testing is required.
It is advisable to ensure that any third party backup power supplies or recovery procedures are checked regularly
to ensure that the operation of the Paxton system is not compromised.
Maintenance
The power for the unit is supplied via the USB cable. No additional supply is required.
Power Supply
Wiring methods shall be in accordance with the National Electrical Code (ANSI/NFPA70), local codes, and the
authorities having jurisdiction.
Voltage
Specifications
Operating temperatures - all items
Electrical
Environment
Dimensions
Min Max
Width HeightDepth
Current
Waterproof
Min Max
No
PAGE 2
FCC Compliance
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Changes or modifications not expressly approved by
the party responsible for compliance could void the user's authority to operate the equipment.
Product compliance and limitations
Wiring methods shall be in accordance with the National Electrical Code (ANSI/NFPA70), local codes, and the
authorities having jurisdiction.
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following
two conditions: (1) this device may not cause interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of the device.

3. Ins-40081-US Net2 desktop reader USB
Desktop Reader
The desktop reader is designed to sit next to the PC. It is used for adding tokens to a Net2 system and also for
identifying lost cards. Additional workstations can also have desktop readers.
With the Net2 software running, any new token presented above the desktop reader will cause the new user wizard
to appear with the appropriate card number displayed. The users details can then be entered and the token issued.
If the token is already known to the system, the relevant user's record will appear.
Paxton
Part number Description
514-326-US Net2 USB desktop reader
Net2 USB desktop reader – options
Installation This unit is for Indoor use only
Plug the reader into a convenient USB port on the PC with the supplied USB cable.
Stop and then restart the Net2 server program. The device will now be available to the Net2 program.
PAGE 1
Paxton
This unit requires Net2 v3.09 or later software. Support for Mifare cards requires v4.17 or later.
Call Technical Support if you require a software upgrade.
03/01/2010
Technical Support
Technical help is available: Monday - Friday from 02:00 AM - 8:00 PM (EST)
1.800.672.7298 supportUS@paxton-access.com
Documentation on all Paxton products can be found on our web site - http://www.paxton-access.com/
For instructions in alternative languages - http://paxton.info/1000

4. -20 °C ( -4 °F ) +55 °C ( + 131 °F )
5V DC
100 mA
4 1/2 inch 3 inch 3/4 inch
Following the completed installation of this equipment, no further maintenance or testing is required.
It is advisable to ensure that any third party backup power supplies or recovery procedures are checked regularly
to ensure that the operation of the Paxton system is not compromised.
Maintenance
The power for the unit is supplied via the USB cable. No additional supply is required.
Power Supply
Wiring methods shall be in accordance with the National Electrical Code (ANSI/NFPA70), local codes, and the
authorities having jurisdiction.
Voltage
Specifications
Operating temperatures - all items
Electrical
Environment
Dimensions
Min Max
Width HeightDepth
Current
Waterproof
Min Max
No
PAGE 2
FCC Compliance
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Changes or modifications not expressly approved by
the party responsible for compliance could void the user's authority to operate the equipment.
Product compliance and limitations
Wiring methods shall be in accordance with the National Electrical Code (ANSI/NFPA70), local codes, and the
authorities having jurisdiction.
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following
two conditions: (1) this device may not cause interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of the device.