1.Use full pneumatic control cleaning, pneumatic logic control 2.Without electricity, avoid fire hazards 3.Can use water or solvent, safe and reliable 4.Totally enclosed cleaning process, to avoid direct contact with cleaning fluid 5.Liquid can be recycled, save cost 6.Spray pressure, and the size of the diaphragm pump air pressure is adjustable 7.The machine maintenance is simple, all 304 stainless steel body, prolong life

1. S1688 Stencil Cleaner
machine
http://www.smthelp.com

2. Product introduction:
Pneumatic design of stencil cleaning machine adopts full
pneumatic control wash, to clean the stencil type circuit
board, can effectively remove the solder paste and flux
residue driven by the pneumatic logic control and
efficient, fast, safe is cleaning the stencil current and
recommended method, using rotating efficient
atomization spray arms, four heavy solution filtration
cycle use, simple maintenance, all stainless steel body,
guarantee the life span.Adjust the appropriate screen
hanging rack, move to clean items to center position, can
be carried out on the screen or circuit board cleaning.
Using range:
Steel mesh, wire mesh, copper mesh,
microporous network, scraper, fixture, PCB,
etc., can effectively lower removal from the
solder paste, such as red glue residue.
http://www.smthelp.com

3. Features:
1.Use full pneumatic control cleaning, pneumatic logic control
2.Without electricity, avoid fire hazards
3.Can use water or solvent, safe and reliable
4.Totally enclosed cleaning process, to avoid direct contact with cleaning fluid
5.Liquid can be recycled, save cost
6.Spray pressure, and the size of the diaphragm pump air pressure is adjustable
7.The machine maintenance is simple, all 304 stainless steel body, prolong life
http://www.smthelp.com

4. The main preparation
Pneumatic diaphragm pump
(American Ingersoll rand)
Pneumatic timer (Germany FESTO)
The handle
(the United States - Southco)
Pneumatic switch, indicator light
（ Japan, SMC ）
http://www.smthelp.com

5. Working principle of the cleaning ：
Nylon filter 20 microns→
Activated carbon filter→
Positive resin filter→
reservoir→
10 micron filter filter→
Powerful diaphragm pump→
Pneumatic motor convulsions→
The rotary valve→
Rotary jet cleaning chamber→
Nylon filter and then repeat cycle 20 microns.
In the strong cleaning time can be set when
the diaphragm pump, in the pneumatic motor
convulsions blow drying time can be set.
Press the Start button began to work.One key
operation, easy for cleaning and drying work process
http://www.smthelp.com

6. Automatic, drainage system,
more conducive to the
production of flexible
management
Replaceable modularized controller and
the quick insert design, maintenance,
maintenance easy and convenient.
http://www.smthelp.com

7. Cleaning pipe
Contrast figure before and after cleaning
http://www.smthelp.com

8. Technical parameters:
http://www.smthelp.com