SlideShare ist ein Scribd-Unternehmen logo
1 von 79
FINISHING AND CEMENTATION

www.indiandentalacademy.com
INDIAN DENTAL ACADEMY
Leader in continuing dental education
www.indiandentalacademy.com

www.indiandentalacademy.com
Contents
Introduction
Procedures
Abrasives
Zones of the casting
Cementation
Ideal requirements
Types
Conclusion
References
www.indiandentalacademy.com
The unpolished surface is relatively
rough, and a series of finishing
procedures are needed to produce a
highly polished surface to limit the
accumulation and retention of plaque
and facilitate maintenance the health
the supporting periodontal tissues.

www.indiandentalacademy.com
Cast metal restorations needs a series of
finishing procedures before try in and
cementation.

1.
2.
3.
4.
5.

Preliminary procedures
Try in and adjustment
Pre cementation polishing
Cementation and
Post cementation polishing.

www.indiandentalacademy.com
ABRASIVES AND POLISHING MATERIALS

Abrasion : It is the smoothening of
rough surface before preparing it for
polishing. The smoothening is carried
out by cutting action.

www.indiandentalacademy.com
COMMON ABRASIVES USED

1. Diamond: chips are bound to a metal

shape by ceramic bond or
electroplating.hardest of all abrasives used
on enamel or porcelain.

www.indiandentalacademy.com
2. Silicon carbide: basic material for
carborundom. It is sintered or pressed with
a binder into grinding wheels or discs.

www.indiandentalacademy.com
3. Emery: it is a mixture of aluminium oxide
and iron oxide.Hard and black natural mineral
can be used on gold and porcelain.

www.indiandentalacademy.com
4. Garnet: several minerals having similar
properties.used for grinding plastics and metal
alloys.
5. Sand paper: form of quartz,rounded or
angular in shape.they are typically bonded to
Paper discs for grinding metals and plastics.

www.indiandentalacademy.com
6. Aluminium oxide: common abrasive used in
dentistry in the form discs and strips.
It is also impregnated into rubber wheels and
points. Used to adjust enamel or finish metal
alloys and ceramic materials

www.indiandentalacademy.com
www.indiandentalacademy.com
Zone-1 Internal margins:
Objective: To minimize any dissolution of the
luting agent, a 1mm wide band of metal
must be obtained that is closely adapted to
the tooth surface.

www.indiandentalacademy.com
Here we should inspect the internal portion for
small nodules or bubbles and should be
removed with a hand piece using round
bur,but care should be taken to avoid damage
to the margin and annoying remakes.

www.indiandentalacademy.com
Zone-2 Internal
surface:
Objective: is that no
contact should exist
between the disc and
the internal surface of
the casting.
It should be
examined for the
nodules.

www.indiandentalacademy.com
Nodules should be
removed with a round
bur and carefully seated
on the die.
Force should not be
applied as any nodule
present may scratch the
die and this will result in
a restoration with poor
margins and poor
prognosis.

www.indiandentalacademy.com
In the areas of the nodule, deliberate
removing of slightly greater amount of
alloy is recommended and should be
removed in one single step.

www.indiandentalacademy.com
Marking agents
Several agents are commercially
available to facilitate identifications seating
interference between the casting and die.
1.Water soluble dies eg;ligna mark.
2.Solvent based dies eg;accufilm
3.Powdered sprays eg;occludent
4.A suspension of rouge in chloroform.
www.indiandentalacademy.com
Zone-3 The sprue:
Objective; Is to establish proper coronal
morphology and function.
A corborundum separating disk is used
to cut the sprue
Cutting should be done circumferentially
Excess in the area of the sprue
attachment is removed with the disk, and
the area is refined with stones and
sandpaper disks
www.indiandentalacademy.com
www.indiandentalacademy.com
Zone-4 Proximal
contacts
Objective: is to adjusted
so that they will be in
correct when evaluated
in the mouth.
Proximal contacts on the
stone cast can be
achieved by careful
scraping of the adjacent
teeth with a blade.

www.indiandentalacademy.com
Articulating strips between adjacent castings
or between the castings and the adjacent
tooth is helpful, as it allows the areas where
binding contact occurs to be adjusted
through grinding.

www.indiandentalacademy.com
Connectors
The connectors require
special attention when
fixed partial denture is
finished
Periodontal health is
compromised if they are
not properly contoured
and finished.
Parabolic configuration

www.indiandentalacademy.com
Rotary instruments
such as rubber
wheels, which
allows access to the
cervical margin are
used so that they do
not jeopardize the
margins

www.indiandentalacademy.com
Zone-5 Occlusal
surface
Objective is to re-establish
Occlusal contacts in static and
dynamic relationship to the
opposing arch.
Occlusal contacts are
checked with Mylar
articulating strips.
Occlusal prematurities are a
result of excessive heavy
contact on the wax pattern as
the wax is subject to elastic
recovery.

www.indiandentalacademy.com
The adjustments are
done with flame
shaped finishing
burs.The entire
ridge or cusp should
be redeveloped
rather than grinding
only the point of
interference.
After refinement of
the Occlusal
contacts ,they
should be altered
with extensive
polishing.
www.indiandentalacademy.com
Zone-6 Axial walls

Objective: The axial walls
should be smoothly
contoured and polished so
that the patient can carry out
plaque control.
Surface defects are removed
by grinding with abrasive
particles
Polishing should be carried
out by using the abrasives in
a sequence. The finer
abrasive should be used last
because the coarser grits
will remove material
www.indiandentalacademy.com
efficiently
Zone-7- External
margins
Objective: for the
restorations longevity.
Cavo-surface margins
should be finished
directly on the tooth.
Those parts that
cannot be finished on
the tooth should be
finished on the disc
The edges of the
margin should not be
distorted
www.indiandentalacademy.com
A fine grit stone is used to remove casting
roughness, followed by soft rubber wheel and
finally by rouge or a brush, during all these
procedures, the casting should be supported by
the finger.

www.indiandentalacademy.com
Once the laboratory procedures are completed the
restoration should be evaluated in the patient’s
mouth
before final finishing and cementation
•It should be evaluated for the following:
1.Proximal contacts
2.Margin integrity
3.Stability
4.Internal fit
5.External contour
6.Occlusion
7.Surface finish
www.indiandentalacademy.com
Proximal contacts
Proximal contacts should be like those of natural
teeth
Use of floss is a convenient method to compare
the contacts
If the floss does not pass, the contact is too tight
Ideal contact should allow for positional stability of
the abutments and adjacent teeth as well as easy
maintenance of the supporting structures

www.indiandentalacademy.com
EXCESSIVE
TIGHTNESS.

1. Metal restorations
Adjustments are made with
rubber wheel. The satin
finish produced helps to
identify where binding
occurs because a shiny
spot will appear where
adjustment is necessary.

www.indiandentalacademy.com
2.porcelain
restorations
If high proximal
contact in unglazed
porcelain is easily
adjusted with cylindrical
mounted stone. Area
identified by red pencil.
If adjustment of glazed
porcelain is needed, it
can be polished with
diamond impregnated
silicone points or
diamond polishing paste

www.indiandentalacademy.com
Deficiency
Usually corrected by soldering.
Armamentarium:
Soldering tweezers
Gold solder
Paste flux
Bunsen burner
Antiflux and polishing armamentarium
www.indiandentalacademy.com
1.
2.
3.
4.

Roughening the area with disk
Adding antiflux- granite
Roughened surface is painted with flux
Then the casting is held on the bunsen
flame at the height of the reduction
portion of the flame

www.indiandentalacademy.com
5. As the solder heats up it starts to fuse
and rapidly spread. It should be tipped
to help the solder flow in the desired
direction.
6. Proximal contact is then readjusted.

www.indiandentalacademy.com
Porcelain restorations
Deficient porcelain contact requires
additional fixing, it is at bisque stage.
If restoration has been completely
finished, add on or convection
porcelain can be used

www.indiandentalacademy.com
Margin integrity
The completed
restoration should go
into its place without
binding and the best
adaptation should be at
its margins.
A sharp explorer moved
from restoration to tooth
and from tooth to
restoration can be
evaluated for marginal
adaptation.
www.indiandentalacademy.com
www.indiandentalacademy.com
Stability
The restoration should be checked for
stability. It should not rock or rotate, any
degree of instability is likely to cause failure
during function.

www.indiandentalacademy.com
Occlusion
The occlusion contact with the
opposing teeth is carefully
checked.any undesirable
eccentric contacts as well as
centric interferences must be
identified.
Use of two different colored
ribbon tapes or articulating
paper is used for excursive
movements and centric
contacts. Ant interferes are
then corrected with diamond
or white stone
www.indiandentalacademy.com
Ceramic restorations
Ceramic restorations need certain additional
steps during evaluation to satisfy esthetic,
biologic and mechanical requirements.
Contour, surface characteristics and color
match.

www.indiandentalacademy.com
Contour
The contours of the gingival third is verified
Excessive bulk may be associated with
periodontal disease
When adjustment is necessary porcelain and
metal should not be grounded together.

www.indiandentalacademy.com
If at all grinding both is
absolutely necessary, the
direction of grinding is
parallel to the metalceramic junction.
The incisal edge should be
checked for proper position
and shape
This is the key for good
esthetics and function.
www.indiandentalacademy.com
The negative space
should be evaluated
(incisal embrasures)
The absence of
embrasures draws
attention to the
prosthesis
When viewed from the
incisal inter proximal
embrasures should be
as narrow and deep as
possible
www.indiandentalacademy.com
Cementation
Cement: Binding agent used as a substance to
make objects to adhere to each other, or
something serving to firmly unite. GPT-8
Luting agent: Material that on hardening will fill
a space or bind adjacent objects. GPT-8

www.indiandentalacademy.com
Cementation- The process of attaching
parts by means of cement or attaching a
restoration to natural teeth by means of
cement.GPT-7.
Luting materials play a central role in indirect
dentistry by aiding the retention of
restorations and in the prevention of leakage
at their margins.

www.indiandentalacademy.com
The ideal luting material should be:
Bio- compatible with the tissues
Adhere to tooth surface and restoration either
chemically, mechanically or both.
Prevent leakage by producing a good marginal
seal
Have sufficient mechanical properties to resist
forces transmitted to the lute through the
restoration that is it should have high tensile and
compressive strength, high fracture toughness
and fatigue strength and a modulus of elasticity
which is appropriate for stress absorption
www.indiandentalacademy.com
Be cariostatic
Be insoluble in the dilute organic acids
Resist water sorption
Be available in sufficient range of shades
Achieve optimal physical properties as quickly
as possible
Allow easy removal of excess and clean- up

www.indiandentalacademy.com
It should have sufficiently low film thickness, so
that the restoration may seat fully.
Should have radio-opacity similar to or greater
than dentine
Additionally the luting cement should be
technique insensitive

www.indiandentalacademy.com
They can be classified according to the material
from which they are formed and more generally,
as active and passive.

www.indiandentalacademy.com
Active luting materials
They are bonded both to tooth and restoration
make the restoration and tooth synergistic and
there by play a role in the retention of the
restoration,as well as sealing its margins and
filling the space between restoration and tooth.

www.indiandentalacademy.com
Passive luting materials
They merely fill the gap between the indirect
restoration and tooth, with no chemical
adhesion at the restorative or lute and or tooth
or lute interface.

www.indiandentalacademy.com
PASSIVE LUTING MATERIALS
Zinc phosphate cement:
Oldest of the currently available luting materials
Powder- liquid material has zinc oxide as the
main constituent of the powder and liquid is an
aqueous solution of phosphoric acid.
Zinc oxide powder react with phosphoric acid to
form an insoluble phosphate

www.indiandentalacademy.com
Setting time can be lengthened by mixing on a
chilled glass slab and working time can be
prolonged by adding small increments of
powder to the liquid
PH of freshly mixed cement is between 1.6 –
3.6.
Clean – up is relatively simple, as the setting
cement reaches a rubbery stage and can be
peeled off the restoration.
Compressive and tensile strengths are
adequate but the solubility of the set material is
high in solutions of lower ph.
Another major disadvantage is the lack of
adhesion to the tooth surface.
www.indiandentalacademy.com
Zinc-polycarboxylate
Fore runner to glass ionomer cements
Introduced by SMITH in 1968, showed true
adhesive attachment by molecular bonding to tooth
structure.
Based on the reaction of zinc oxide and polyacrylic
acid to form zinc polyacrylate

www.indiandentalacademy.com
Clean –up is difficult as it will stick to the mucosa
and should be removed as soon as possible after
placement.
They are as strong as zinc phosphate with higher
tensile strength, however, they are more soluble
than zinc phosphate and may absorb water.

www.indiandentalacademy.com
Glass ionomer cements
The first glass ionomer cements were developed in
1978
These cements contain anion- leach able fluoroalumino-silicate glass which reacts with a water
soluble polymeric acid
The outer layer of glass particles are decomposed
leading to release of Ca+,Al+ and F- ions.thus the
set cement is therefore a core of unreacted glass
particles sheathed by a siliceous hydro gel bounded
together by the reaction products.
www.indiandentalacademy.com
These materials also release fluoride. The value
of this fluoride release in cariostatic is
questionable.
These cements adhere to enamel and dentin and
contribute to the retention of the restoration. 2030% higher retention than zinc phosphate or zinc
polycarboxylate cement.
However these cements have been reported to
cause inflammatory response in pulpal tissue
under deep restorations
They have superior compressive strength but
their tensile strength is low and fracture
toughness is also low
www.indiandentalacademy.com
Resin modified glass ionomer cements
These materials were developed to overcome some
of the short comings of traditional glass ionomer
cements
In addition to components of glass ionomer they
contain a monomer such as 2 hydroxy-ethyl
methacrylate (HEMA) or BIS-GMA.

www.indiandentalacademy.com
Advantages over Conventional Glass
Ionomers are:
Improved bio-compatibility
Better fluoride release
Improved adhesion to tooth and
Improved physical properties, specially tensile
strength
Clean- up is easy as it goes through a rubbery
phase.eg: Fujiplus,Fuji-cem and rely-X

www.indiandentalacademy.com
Active luting agents
Resin based luting materials
These cements bond to the tooth by the cure of
dentin – bonding agent. These materials may also
be bonded to a ceramic surface which has been
rendered micro-mechanically retentive by treating
with acids such as hydrofloric acid, while bonding
to metal surfaces may be achieved by oxidising
ortin plating gold surfaces
www.indiandentalacademy.com
Bonding is usually achieved with organophosphates, HEMA or 4-META(4-methacryl
ethyl trimellitic anhydride)

www.indiandentalacademy.com
Their physical properties include=
Excellent compressive and tensile strength and
fracture toughness
Low solubility in oral fluids
Low potential for microleackage when bonded to
a tooth by an intermediary bonding systems.
High bio-compatibility when used with dentin
bonding systems

www.indiandentalacademy.com
CHOICE OF LUTING AGENT
Zinc – phosphate

1. Cast restorations
2. Normal conservatively prepared tooth

www.indiandentalacademy.com
Zinc polycarboxylate cement

1. Recommended on retentive preparations with
minimal pulp irritation.
Eg: children with large pulp chambers.

www.indiandentalacademy.com
Glass ionomer cement
Popular for luting cast restorations

www.indiandentalacademy.com
Resin modified glass ionomer luting
agents
Most popular because low solubility and low
micro leakage and reduced post
cementation sensitivity.

www.indiandentalacademy.com
Adhesive resin
Material of choice with all ceramic
restorations.

www.indiandentalacademy.com
Cementation with zinc phosphate
The field must be dry
Isolated with cotton rolls
Protection of pulp by application of
varnish|dentin bonding agent
Mixing done by adding increments
Mixing done on a wide area
www.indiandentalacademy.com
When the consistency is right,load the
cement on to the restoration.
Tell the patient to put force to the
Occlusal surface by closing on a plastic
wafer.
Once the cement has set remove the
excess with explorer.

www.indiandentalacademy.com
Cementation with
polycarboxylate
Isolate the quadrant
Blot dry the tooth
Dispense proper powder-liquid ratio
Spatulation should be complete in 30
secs
Cement is coated on the inside of the
casting and seated on the tooth.

www.indiandentalacademy.com
Cementation with glass
ionomer
Clean and dry the tooth
The preparation can be dried with
pumice to increase retention.
Powder liquid ratio is 3.4:1
Mixing should be fast,applied on to the
restoration and seat the crown.
Excess cement removed after it has
become brittle
www.indiandentalacademy.com
Resin cements
For metal restorations
Air abrade the the inside of the crown,rinse it
and dry it.
Dentin activator is appliued for 10 secs
Base catalyst ratio is 4:1,to this 2 scoops of
powder is added and stirred gently for 5 secs
to produce a creamy mixture
Apply the cement onto the restoration and
placed over the tooth.10 mins is the setting
time.
www.indiandentalacademy.com
Ceramic restorations
Crown is is silaned by applying the silane
agent onto the internal surface of the crown.
The prepared tooth is cleaned with pumice
washed and dried.
Etch the enamel,rinse for 30 secs
Apply primer to dentin and polymerize for 30
secs
Dispense equal amount of base and catalyst
mix for 20 secs,apply thin layer onto the
internal surface of the crown and seat the
crown
Light cure at marginal areas from
facial,lingual and Occlusal directions.
www.indiandentalacademy.com
Conclusion
When a restoration is tried in the mouth
the proximal contacts,margin
integrity,and occlusion must be verified.
With metal ceramic restorations the
contour in the cervical third is critical for
the maintenance of health of supporting
structures.
Proper shaping of gingival and incisal
embrasures will improve the esthetics.
www.indiandentalacademy.com
No matter what type of cement is used
for cementation,proper moisture control
is essential .
Cement should be protected from
moisture during initial set,and removal
of excess from the gingival sulcus is
critical for continued periodontal health.
Active luting, in which the material
bonds the restoration to the tooth is the
most desirable feature, which make the
resinbonded the material of choice but
they are technique sensitive.
www.indiandentalacademy.com
References
Contemporary Fixed ProsthodonticsRosenstiel
Fundamentals Of Fixed ProsthodonticsShilling burg
Trends In Indirect Dentistry-Dental
Update 2005.

www.indiandentalacademy.com
Thank you
www.indiandentalacademy.com
Leader in continuing dental education

www.indiandentalacademy.com

Weitere ähnliche Inhalte

Was ist angesagt?

Luting cements/ dental crown & bridge courses
Luting cements/ dental crown & bridge coursesLuting cements/ dental crown & bridge courses
Luting cements/ dental crown & bridge coursesIndian dental academy
 
luting cement
luting cement luting cement
luting cement Dr Hiba
 
Kuraray cementation indirect_restorations_guide
Kuraray cementation indirect_restorations_guideKuraray cementation indirect_restorations_guide
Kuraray cementation indirect_restorations_guideJan Pleumsamran
 
Luting agents for fixed prosthodontics/ orthodontic course by indian dental a...
Luting agents for fixed prosthodontics/ orthodontic course by indian dental a...Luting agents for fixed prosthodontics/ orthodontic course by indian dental a...
Luting agents for fixed prosthodontics/ orthodontic course by indian dental a...Indian dental academy
 
Cementation procedures in fpd
Cementation procedures in fpdCementation procedures in fpd
Cementation procedures in fpdsmidsprostho
 
Luting cements/prosthodontic courses
Luting cements/prosthodontic coursesLuting cements/prosthodontic courses
Luting cements/prosthodontic coursesIndian dental academy
 
Resin luting agents  /orthodontic courses by Indian dental academy 
Resin luting agents  /orthodontic courses by Indian dental academy Resin luting agents  /orthodontic courses by Indian dental academy 
Resin luting agents  /orthodontic courses by Indian dental academy Indian dental academy
 
Anterior cementation technique guide
Anterior cementation technique guideAnterior cementation technique guide
Anterior cementation technique guideKristineAntonsen
 
Luting cements/ dental courses/endodontic courses
Luting cements/ dental courses/endodontic coursesLuting cements/ dental courses/endodontic courses
Luting cements/ dental courses/endodontic coursesIndian dental academy
 
Luting agent/ orthodontic course by indian dental academy
Luting agent/ orthodontic course by indian dental academyLuting agent/ orthodontic course by indian dental academy
Luting agent/ orthodontic course by indian dental academyIndian dental academy
 
Dental luting cements/ colleges for dentistry
Dental luting cements/ colleges for dentistryDental luting cements/ colleges for dentistry
Dental luting cements/ colleges for dentistryIndian dental academy
 

Was ist angesagt? (20)

Luting cements/ dental crown & bridge courses
Luting cements/ dental crown & bridge coursesLuting cements/ dental crown & bridge courses
Luting cements/ dental crown & bridge courses
 
luting cement
luting cement luting cement
luting cement
 
Kuraray cementation indirect_restorations_guide
Kuraray cementation indirect_restorations_guideKuraray cementation indirect_restorations_guide
Kuraray cementation indirect_restorations_guide
 
Select of cement
Select of cementSelect of cement
Select of cement
 
Luting agents for fixed prosthodontics/ orthodontic course by indian dental a...
Luting agents for fixed prosthodontics/ orthodontic course by indian dental a...Luting agents for fixed prosthodontics/ orthodontic course by indian dental a...
Luting agents for fixed prosthodontics/ orthodontic course by indian dental a...
 
Cementation procedures in fpd
Cementation procedures in fpdCementation procedures in fpd
Cementation procedures in fpd
 
Luting cements/prosthodontic courses
Luting cements/prosthodontic coursesLuting cements/prosthodontic courses
Luting cements/prosthodontic courses
 
Dental cements and cementation procedures
Dental cements and cementation proceduresDental cements and cementation procedures
Dental cements and cementation procedures
 
Dental Cement
Dental CementDental Cement
Dental Cement
 
Incomplete seating of cement crowns
Incomplete seating of cement crownsIncomplete seating of cement crowns
Incomplete seating of cement crowns
 
Resin luting agents  /orthodontic courses by Indian dental academy 
Resin luting agents  /orthodontic courses by Indian dental academy Resin luting agents  /orthodontic courses by Indian dental academy 
Resin luting agents  /orthodontic courses by Indian dental academy 
 
Anterior cementation technique guide
Anterior cementation technique guideAnterior cementation technique guide
Anterior cementation technique guide
 
Luting agents/ General orthodontics
Luting  agents/ General orthodonticsLuting  agents/ General orthodontics
Luting agents/ General orthodontics
 
Luting cements/ dental courses/endodontic courses
Luting cements/ dental courses/endodontic coursesLuting cements/ dental courses/endodontic courses
Luting cements/ dental courses/endodontic courses
 
Luting
LutingLuting
Luting
 
luting cement
luting cementluting cement
luting cement
 
Luting agent/ orthodontic course by indian dental academy
Luting agent/ orthodontic course by indian dental academyLuting agent/ orthodontic course by indian dental academy
Luting agent/ orthodontic course by indian dental academy
 
Dental luting cements/ colleges for dentistry
Dental luting cements/ colleges for dentistryDental luting cements/ colleges for dentistry
Dental luting cements/ colleges for dentistry
 
Luting cements
Luting cementsLuting cements
Luting cements
 
Resin Luting cements (2nd edition)
Resin Luting cements (2nd edition) Resin Luting cements (2nd edition)
Resin Luting cements (2nd edition)
 

Andere mochten auch

Try in and cementation of crown
Try in and cementation of crownTry in and cementation of crown
Try in and cementation of crownchann veasna
 
phosphate coating on alloys
phosphate coating on alloysphosphate coating on alloys
phosphate coating on alloysengrktk
 
Phosphating and chromating
Phosphating and chromatingPhosphating and chromating
Phosphating and chromatingAbishek Arumugam
 
Failure of fixed prosthodontics
Failure of fixed prosthodonticsFailure of fixed prosthodontics
Failure of fixed prosthodonticshesham1964
 
dental cements (3) dental material
dental cements (3) dental materialdental cements (3) dental material
dental cements (3) dental materialDr-Faisal Al-Qahtani
 

Andere mochten auch (9)

Try in and cementation of crown
Try in and cementation of crownTry in and cementation of crown
Try in and cementation of crown
 
Alloys/cosmetic dentistry courses
Alloys/cosmetic dentistry coursesAlloys/cosmetic dentistry courses
Alloys/cosmetic dentistry courses
 
phosphate coating on alloys
phosphate coating on alloysphosphate coating on alloys
phosphate coating on alloys
 
Phosphating and chromating
Phosphating and chromatingPhosphating and chromating
Phosphating and chromating
 
Cementation
CementationCementation
Cementation
 
Bridge failure
Bridge failureBridge failure
Bridge failure
 
Failure of fixed prosthodontics
Failure of fixed prosthodonticsFailure of fixed prosthodontics
Failure of fixed prosthodontics
 
Cementation
CementationCementation
Cementation
 
dental cements (3) dental material
dental cements (3) dental materialdental cements (3) dental material
dental cements (3) dental material
 

Ähnlich wie Finishing and cementation /certified fixed orthodontic courses by Indian dental academy

Finishing and cementation/ dental education in india
Finishing and cementation/ dental education in indiaFinishing and cementation/ dental education in india
Finishing and cementation/ dental education in indiaIndian dental academy
 
Composite restoration
Composite restorationComposite restoration
Composite restorationHazhar Ahmed
 
Wax patterns fabrication for fixed partial dentures
Wax patterns fabrication for fixed partial denturesWax patterns fabrication for fixed partial dentures
Wax patterns fabrication for fixed partial denturesShebin Abraham
 
Composite restoration pptx
Composite restoration pptxComposite restoration pptx
Composite restoration pptxHazhar Ahmed
 
Ceramic inlays and onlays
Ceramic inlays and onlaysCeramic inlays and onlays
Ceramic inlays and onlaysRamesh Maharjan
 
Provisional restorations finalised /certified fixed orthodontic courses by In...
Provisional restorations finalised /certified fixed orthodontic courses by In...Provisional restorations finalised /certified fixed orthodontic courses by In...
Provisional restorations finalised /certified fixed orthodontic courses by In...Indian dental academy
 
Provisional restorations finalised /certified fixed orthodontic courses by In...
Provisional restorations finalised /certified fixed orthodontic courses by In...Provisional restorations finalised /certified fixed orthodontic courses by In...
Provisional restorations finalised /certified fixed orthodontic courses by In...Indian dental academy
 
Impression Techniques in Fixed partial denture
Impression Techniques in Fixed partial dentureImpression Techniques in Fixed partial denture
Impression Techniques in Fixed partial dentureDr.Richa Sahai
 
Finishing and-polishing (1)
Finishing and-polishing (1)Finishing and-polishing (1)
Finishing and-polishing (1)Satyanarayana Ss
 
Lab procedures in conventional cast partial dentures / dental lab courses
Lab procedures in conventional cast partial dentures / dental lab coursesLab procedures in conventional cast partial dentures / dental lab courses
Lab procedures in conventional cast partial dentures / dental lab coursesIndian dental academy
 
Lab procedures in cast partial dentures / dental lab courses
Lab procedures in cast partial dentures / dental lab coursesLab procedures in cast partial dentures / dental lab courses
Lab procedures in cast partial dentures / dental lab coursesIndian dental academy
 
Operative dentistry fourth year lecture 8
Operative dentistry fourth year lecture 8Operative dentistry fourth year lecture 8
Operative dentistry fourth year lecture 8Lama K Banna
 
Lab procedures ( part 1 ) / dental courses
Lab procedures  ( part 1 ) / dental coursesLab procedures  ( part 1 ) / dental courses
Lab procedures ( part 1 ) / dental coursesIndian dental academy
 
Die materials /certified fixed orthodontic courses by Indian dental academy
Die materials   /certified fixed orthodontic courses by Indian dental academy Die materials   /certified fixed orthodontic courses by Indian dental academy
Die materials /certified fixed orthodontic courses by Indian dental academy Indian dental academy
 
Finishing & polishing materials in dentistry/ rotary endodontic courses by in...
Finishing & polishing materials in dentistry/ rotary endodontic courses by in...Finishing & polishing materials in dentistry/ rotary endodontic courses by in...
Finishing & polishing materials in dentistry/ rotary endodontic courses by in...Indian dental academy
 
LAB PROCEDURES IN CPD
LAB PROCEDURES IN CPDLAB PROCEDURES IN CPD
LAB PROCEDURES IN CPDDiyaSharma39
 

Ähnlich wie Finishing and cementation /certified fixed orthodontic courses by Indian dental academy (20)

Finishing and cementation/ dental education in india
Finishing and cementation/ dental education in indiaFinishing and cementation/ dental education in india
Finishing and cementation/ dental education in india
 
Composite restoration
Composite restorationComposite restoration
Composite restoration
 
Wax patterns fabrication for fixed partial dentures
Wax patterns fabrication for fixed partial denturesWax patterns fabrication for fixed partial dentures
Wax patterns fabrication for fixed partial dentures
 
Composite restoration pptx
Composite restoration pptxComposite restoration pptx
Composite restoration pptx
 
Class i cavity prep1
Class i cavity prep1Class i cavity prep1
Class i cavity prep1
 
Ceramic inlays and onlays
Ceramic inlays and onlaysCeramic inlays and onlays
Ceramic inlays and onlays
 
Provisional restorations finalised /certified fixed orthodontic courses by In...
Provisional restorations finalised /certified fixed orthodontic courses by In...Provisional restorations finalised /certified fixed orthodontic courses by In...
Provisional restorations finalised /certified fixed orthodontic courses by In...
 
Provisional restorations finalised /certified fixed orthodontic courses by In...
Provisional restorations finalised /certified fixed orthodontic courses by In...Provisional restorations finalised /certified fixed orthodontic courses by In...
Provisional restorations finalised /certified fixed orthodontic courses by In...
 
Impression Techniques in Fixed partial denture
Impression Techniques in Fixed partial dentureImpression Techniques in Fixed partial denture
Impression Techniques in Fixed partial denture
 
RESIN-BONDED.pptx
RESIN-BONDED.pptxRESIN-BONDED.pptx
RESIN-BONDED.pptx
 
Finishing and-polishing (1)
Finishing and-polishing (1)Finishing and-polishing (1)
Finishing and-polishing (1)
 
record_bases-.ppt
record_bases-.pptrecord_bases-.ppt
record_bases-.ppt
 
Lab procedures in conventional cast partial dentures / dental lab courses
Lab procedures in conventional cast partial dentures / dental lab coursesLab procedures in conventional cast partial dentures / dental lab courses
Lab procedures in conventional cast partial dentures / dental lab courses
 
Lab procedures in cast partial dentures / dental lab courses
Lab procedures in cast partial dentures / dental lab coursesLab procedures in cast partial dentures / dental lab courses
Lab procedures in cast partial dentures / dental lab courses
 
Operative dentistry fourth year lecture 8
Operative dentistry fourth year lecture 8Operative dentistry fourth year lecture 8
Operative dentistry fourth year lecture 8
 
Lab procedures ( part 1 ) / dental courses
Lab procedures  ( part 1 ) / dental coursesLab procedures  ( part 1 ) / dental courses
Lab procedures ( part 1 ) / dental courses
 
Die materials /certified fixed orthodontic courses by Indian dental academy
Die materials   /certified fixed orthodontic courses by Indian dental academy Die materials   /certified fixed orthodontic courses by Indian dental academy
Die materials /certified fixed orthodontic courses by Indian dental academy
 
Oper.ii 06
Oper.ii 06Oper.ii 06
Oper.ii 06
 
Finishing & polishing materials in dentistry/ rotary endodontic courses by in...
Finishing & polishing materials in dentistry/ rotary endodontic courses by in...Finishing & polishing materials in dentistry/ rotary endodontic courses by in...
Finishing & polishing materials in dentistry/ rotary endodontic courses by in...
 
LAB PROCEDURES IN CPD
LAB PROCEDURES IN CPDLAB PROCEDURES IN CPD
LAB PROCEDURES IN CPD
 

Mehr von Indian dental academy

Indian Dentist - relocate to united kingdom
Indian Dentist - relocate to united kingdomIndian Dentist - relocate to united kingdom
Indian Dentist - relocate to united kingdomIndian dental academy
 
1ST, 2ND AND 3RD ORDER BENDS IN STANDARD EDGEWISE APPLIANCE SYSTEM /Fixed ort...
1ST, 2ND AND 3RD ORDER BENDS IN STANDARD EDGEWISE APPLIANCE SYSTEM /Fixed ort...1ST, 2ND AND 3RD ORDER BENDS IN STANDARD EDGEWISE APPLIANCE SYSTEM /Fixed ort...
1ST, 2ND AND 3RD ORDER BENDS IN STANDARD EDGEWISE APPLIANCE SYSTEM /Fixed ort...Indian dental academy
 
Invisalign -invisible aligners course in india
Invisalign -invisible aligners course in india Invisalign -invisible aligners course in india
Invisalign -invisible aligners course in india Indian dental academy
 
Invisible aligners for your orthodontics pratice
Invisible aligners for your orthodontics praticeInvisible aligners for your orthodontics pratice
Invisible aligners for your orthodontics praticeIndian dental academy
 
Development of muscles of mastication / dental implant courses
Development of muscles of mastication / dental implant coursesDevelopment of muscles of mastication / dental implant courses
Development of muscles of mastication / dental implant coursesIndian dental academy
 
Corticosteriods uses in dentistry/ oral surgery courses  
Corticosteriods uses in dentistry/ oral surgery courses  Corticosteriods uses in dentistry/ oral surgery courses  
Corticosteriods uses in dentistry/ oral surgery courses  Indian dental academy
 
Cytotoxicity of silicone materials used in maxillofacial prosthesis / dental ...
Cytotoxicity of silicone materials used in maxillofacial prosthesis / dental ...Cytotoxicity of silicone materials used in maxillofacial prosthesis / dental ...
Cytotoxicity of silicone materials used in maxillofacial prosthesis / dental ...Indian dental academy
 
Diagnosis and treatment planning in completely endntulous arches/dental courses
Diagnosis and treatment planning in completely endntulous arches/dental coursesDiagnosis and treatment planning in completely endntulous arches/dental courses
Diagnosis and treatment planning in completely endntulous arches/dental coursesIndian dental academy
 
Properties of Denture base materials /rotary endodontic courses
Properties of Denture base materials /rotary endodontic coursesProperties of Denture base materials /rotary endodontic courses
Properties of Denture base materials /rotary endodontic coursesIndian dental academy
 
Use of modified tooth forms in complete denture occlusion / dental implant...
Use of modified  tooth forms  in  complete denture occlusion / dental implant...Use of modified  tooth forms  in  complete denture occlusion / dental implant...
Use of modified tooth forms in complete denture occlusion / dental implant...Indian dental academy
 
Dental luting cements / oral surgery courses  
Dental   luting cements / oral surgery courses  Dental   luting cements / oral surgery courses  
Dental luting cements / oral surgery courses  Indian dental academy
 
Dental casting alloys/ oral surgery courses  
Dental casting alloys/ oral surgery courses  Dental casting alloys/ oral surgery courses  
Dental casting alloys/ oral surgery courses  Indian dental academy
 
Dental casting investment materials/endodontic courses
Dental casting investment materials/endodontic coursesDental casting investment materials/endodontic courses
Dental casting investment materials/endodontic coursesIndian dental academy
 
Dental casting waxes/ oral surgery courses  
Dental casting waxes/ oral surgery courses  Dental casting waxes/ oral surgery courses  
Dental casting waxes/ oral surgery courses  Indian dental academy
 
Dental ceramics/prosthodontic courses
Dental ceramics/prosthodontic coursesDental ceramics/prosthodontic courses
Dental ceramics/prosthodontic coursesIndian dental academy
 
Dental implant/ oral surgery courses  
Dental implant/ oral surgery courses  Dental implant/ oral surgery courses  
Dental implant/ oral surgery courses  Indian dental academy
 
Dental perspective/cosmetic dentistry courses
Dental perspective/cosmetic dentistry coursesDental perspective/cosmetic dentistry courses
Dental perspective/cosmetic dentistry coursesIndian dental academy
 
Dental tissues and their replacements/ oral surgery courses  
Dental tissues and their replacements/ oral surgery courses  Dental tissues and their replacements/ oral surgery courses  
Dental tissues and their replacements/ oral surgery courses  Indian dental academy
 

Mehr von Indian dental academy (20)

Indian Dentist - relocate to united kingdom
Indian Dentist - relocate to united kingdomIndian Dentist - relocate to united kingdom
Indian Dentist - relocate to united kingdom
 
1ST, 2ND AND 3RD ORDER BENDS IN STANDARD EDGEWISE APPLIANCE SYSTEM /Fixed ort...
1ST, 2ND AND 3RD ORDER BENDS IN STANDARD EDGEWISE APPLIANCE SYSTEM /Fixed ort...1ST, 2ND AND 3RD ORDER BENDS IN STANDARD EDGEWISE APPLIANCE SYSTEM /Fixed ort...
1ST, 2ND AND 3RD ORDER BENDS IN STANDARD EDGEWISE APPLIANCE SYSTEM /Fixed ort...
 
Invisalign -invisible aligners course in india
Invisalign -invisible aligners course in india Invisalign -invisible aligners course in india
Invisalign -invisible aligners course in india
 
Invisible aligners for your orthodontics pratice
Invisible aligners for your orthodontics praticeInvisible aligners for your orthodontics pratice
Invisible aligners for your orthodontics pratice
 
online fixed orthodontics course
online fixed orthodontics courseonline fixed orthodontics course
online fixed orthodontics course
 
online orthodontics course
online orthodontics courseonline orthodontics course
online orthodontics course
 
Development of muscles of mastication / dental implant courses
Development of muscles of mastication / dental implant coursesDevelopment of muscles of mastication / dental implant courses
Development of muscles of mastication / dental implant courses
 
Corticosteriods uses in dentistry/ oral surgery courses  
Corticosteriods uses in dentistry/ oral surgery courses  Corticosteriods uses in dentistry/ oral surgery courses  
Corticosteriods uses in dentistry/ oral surgery courses  
 
Cytotoxicity of silicone materials used in maxillofacial prosthesis / dental ...
Cytotoxicity of silicone materials used in maxillofacial prosthesis / dental ...Cytotoxicity of silicone materials used in maxillofacial prosthesis / dental ...
Cytotoxicity of silicone materials used in maxillofacial prosthesis / dental ...
 
Diagnosis and treatment planning in completely endntulous arches/dental courses
Diagnosis and treatment planning in completely endntulous arches/dental coursesDiagnosis and treatment planning in completely endntulous arches/dental courses
Diagnosis and treatment planning in completely endntulous arches/dental courses
 
Properties of Denture base materials /rotary endodontic courses
Properties of Denture base materials /rotary endodontic coursesProperties of Denture base materials /rotary endodontic courses
Properties of Denture base materials /rotary endodontic courses
 
Use of modified tooth forms in complete denture occlusion / dental implant...
Use of modified  tooth forms  in  complete denture occlusion / dental implant...Use of modified  tooth forms  in  complete denture occlusion / dental implant...
Use of modified tooth forms in complete denture occlusion / dental implant...
 
Dental luting cements / oral surgery courses  
Dental   luting cements / oral surgery courses  Dental   luting cements / oral surgery courses  
Dental luting cements / oral surgery courses  
 
Dental casting alloys/ oral surgery courses  
Dental casting alloys/ oral surgery courses  Dental casting alloys/ oral surgery courses  
Dental casting alloys/ oral surgery courses  
 
Dental casting investment materials/endodontic courses
Dental casting investment materials/endodontic coursesDental casting investment materials/endodontic courses
Dental casting investment materials/endodontic courses
 
Dental casting waxes/ oral surgery courses  
Dental casting waxes/ oral surgery courses  Dental casting waxes/ oral surgery courses  
Dental casting waxes/ oral surgery courses  
 
Dental ceramics/prosthodontic courses
Dental ceramics/prosthodontic coursesDental ceramics/prosthodontic courses
Dental ceramics/prosthodontic courses
 
Dental implant/ oral surgery courses  
Dental implant/ oral surgery courses  Dental implant/ oral surgery courses  
Dental implant/ oral surgery courses  
 
Dental perspective/cosmetic dentistry courses
Dental perspective/cosmetic dentistry coursesDental perspective/cosmetic dentistry courses
Dental perspective/cosmetic dentistry courses
 
Dental tissues and their replacements/ oral surgery courses  
Dental tissues and their replacements/ oral surgery courses  Dental tissues and their replacements/ oral surgery courses  
Dental tissues and their replacements/ oral surgery courses  
 

Kürzlich hochgeladen

Arihant handbook biology for class 11 .pdf
Arihant handbook biology for class 11 .pdfArihant handbook biology for class 11 .pdf
Arihant handbook biology for class 11 .pdfchloefrazer622
 
Measures of Dispersion and Variability: Range, QD, AD and SD
Measures of Dispersion and Variability: Range, QD, AD and SDMeasures of Dispersion and Variability: Range, QD, AD and SD
Measures of Dispersion and Variability: Range, QD, AD and SDThiyagu K
 
Introduction to Nonprofit Accounting: The Basics
Introduction to Nonprofit Accounting: The BasicsIntroduction to Nonprofit Accounting: The Basics
Introduction to Nonprofit Accounting: The BasicsTechSoup
 
fourth grading exam for kindergarten in writing
fourth grading exam for kindergarten in writingfourth grading exam for kindergarten in writing
fourth grading exam for kindergarten in writingTeacherCyreneCayanan
 
Grant Readiness 101 TechSoup and Remy Consulting
Grant Readiness 101 TechSoup and Remy ConsultingGrant Readiness 101 TechSoup and Remy Consulting
Grant Readiness 101 TechSoup and Remy ConsultingTechSoup
 
Presentation by Andreas Schleicher Tackling the School Absenteeism Crisis 30 ...
Presentation by Andreas Schleicher Tackling the School Absenteeism Crisis 30 ...Presentation by Andreas Schleicher Tackling the School Absenteeism Crisis 30 ...
Presentation by Andreas Schleicher Tackling the School Absenteeism Crisis 30 ...EduSkills OECD
 
Student login on Anyboli platform.helpin
Student login on Anyboli platform.helpinStudent login on Anyboli platform.helpin
Student login on Anyboli platform.helpinRaunakKeshri1
 
Class 11th Physics NEET formula sheet pdf
Class 11th Physics NEET formula sheet pdfClass 11th Physics NEET formula sheet pdf
Class 11th Physics NEET formula sheet pdfAyushMahapatra5
 
Explore beautiful and ugly buildings. Mathematics helps us create beautiful d...
Explore beautiful and ugly buildings. Mathematics helps us create beautiful d...Explore beautiful and ugly buildings. Mathematics helps us create beautiful d...
Explore beautiful and ugly buildings. Mathematics helps us create beautiful d...christianmathematics
 
General AI for Medical Educators April 2024
General AI for Medical Educators April 2024General AI for Medical Educators April 2024
General AI for Medical Educators April 2024Janet Corral
 
The Most Excellent Way | 1 Corinthians 13
The Most Excellent Way | 1 Corinthians 13The Most Excellent Way | 1 Corinthians 13
The Most Excellent Way | 1 Corinthians 13Steve Thomason
 
Measures of Central Tendency: Mean, Median and Mode
Measures of Central Tendency: Mean, Median and ModeMeasures of Central Tendency: Mean, Median and Mode
Measures of Central Tendency: Mean, Median and ModeThiyagu K
 
Sanyam Choudhary Chemistry practical.pdf
Sanyam Choudhary Chemistry practical.pdfSanyam Choudhary Chemistry practical.pdf
Sanyam Choudhary Chemistry practical.pdfsanyamsingh5019
 
Unit-IV- Pharma. Marketing Channels.pptx
Unit-IV- Pharma. Marketing Channels.pptxUnit-IV- Pharma. Marketing Channels.pptx
Unit-IV- Pharma. Marketing Channels.pptxVishalSingh1417
 
9548086042 for call girls in Indira Nagar with room service
9548086042  for call girls in Indira Nagar  with room service9548086042  for call girls in Indira Nagar  with room service
9548086042 for call girls in Indira Nagar with room servicediscovermytutordmt
 
1029 - Danh muc Sach Giao Khoa 10 . pdf
1029 -  Danh muc Sach Giao Khoa 10 . pdf1029 -  Danh muc Sach Giao Khoa 10 . pdf
1029 - Danh muc Sach Giao Khoa 10 . pdfQucHHunhnh
 
Interactive Powerpoint_How to Master effective communication
Interactive Powerpoint_How to Master effective communicationInteractive Powerpoint_How to Master effective communication
Interactive Powerpoint_How to Master effective communicationnomboosow
 
Activity 01 - Artificial Culture (1).pdf
Activity 01 - Artificial Culture (1).pdfActivity 01 - Artificial Culture (1).pdf
Activity 01 - Artificial Culture (1).pdfciinovamais
 

Kürzlich hochgeladen (20)

Arihant handbook biology for class 11 .pdf
Arihant handbook biology for class 11 .pdfArihant handbook biology for class 11 .pdf
Arihant handbook biology for class 11 .pdf
 
Measures of Dispersion and Variability: Range, QD, AD and SD
Measures of Dispersion and Variability: Range, QD, AD and SDMeasures of Dispersion and Variability: Range, QD, AD and SD
Measures of Dispersion and Variability: Range, QD, AD and SD
 
Introduction to Nonprofit Accounting: The Basics
Introduction to Nonprofit Accounting: The BasicsIntroduction to Nonprofit Accounting: The Basics
Introduction to Nonprofit Accounting: The Basics
 
fourth grading exam for kindergarten in writing
fourth grading exam for kindergarten in writingfourth grading exam for kindergarten in writing
fourth grading exam for kindergarten in writing
 
Grant Readiness 101 TechSoup and Remy Consulting
Grant Readiness 101 TechSoup and Remy ConsultingGrant Readiness 101 TechSoup and Remy Consulting
Grant Readiness 101 TechSoup and Remy Consulting
 
Presentation by Andreas Schleicher Tackling the School Absenteeism Crisis 30 ...
Presentation by Andreas Schleicher Tackling the School Absenteeism Crisis 30 ...Presentation by Andreas Schleicher Tackling the School Absenteeism Crisis 30 ...
Presentation by Andreas Schleicher Tackling the School Absenteeism Crisis 30 ...
 
Student login on Anyboli platform.helpin
Student login on Anyboli platform.helpinStudent login on Anyboli platform.helpin
Student login on Anyboli platform.helpin
 
Class 11th Physics NEET formula sheet pdf
Class 11th Physics NEET formula sheet pdfClass 11th Physics NEET formula sheet pdf
Class 11th Physics NEET formula sheet pdf
 
Explore beautiful and ugly buildings. Mathematics helps us create beautiful d...
Explore beautiful and ugly buildings. Mathematics helps us create beautiful d...Explore beautiful and ugly buildings. Mathematics helps us create beautiful d...
Explore beautiful and ugly buildings. Mathematics helps us create beautiful d...
 
General AI for Medical Educators April 2024
General AI for Medical Educators April 2024General AI for Medical Educators April 2024
General AI for Medical Educators April 2024
 
Mattingly "AI & Prompt Design: Structured Data, Assistants, & RAG"
Mattingly "AI & Prompt Design: Structured Data, Assistants, & RAG"Mattingly "AI & Prompt Design: Structured Data, Assistants, & RAG"
Mattingly "AI & Prompt Design: Structured Data, Assistants, & RAG"
 
The Most Excellent Way | 1 Corinthians 13
The Most Excellent Way | 1 Corinthians 13The Most Excellent Way | 1 Corinthians 13
The Most Excellent Way | 1 Corinthians 13
 
Measures of Central Tendency: Mean, Median and Mode
Measures of Central Tendency: Mean, Median and ModeMeasures of Central Tendency: Mean, Median and Mode
Measures of Central Tendency: Mean, Median and Mode
 
Sanyam Choudhary Chemistry practical.pdf
Sanyam Choudhary Chemistry practical.pdfSanyam Choudhary Chemistry practical.pdf
Sanyam Choudhary Chemistry practical.pdf
 
Unit-IV- Pharma. Marketing Channels.pptx
Unit-IV- Pharma. Marketing Channels.pptxUnit-IV- Pharma. Marketing Channels.pptx
Unit-IV- Pharma. Marketing Channels.pptx
 
INDIA QUIZ 2024 RLAC DELHI UNIVERSITY.pptx
INDIA QUIZ 2024 RLAC DELHI UNIVERSITY.pptxINDIA QUIZ 2024 RLAC DELHI UNIVERSITY.pptx
INDIA QUIZ 2024 RLAC DELHI UNIVERSITY.pptx
 
9548086042 for call girls in Indira Nagar with room service
9548086042  for call girls in Indira Nagar  with room service9548086042  for call girls in Indira Nagar  with room service
9548086042 for call girls in Indira Nagar with room service
 
1029 - Danh muc Sach Giao Khoa 10 . pdf
1029 -  Danh muc Sach Giao Khoa 10 . pdf1029 -  Danh muc Sach Giao Khoa 10 . pdf
1029 - Danh muc Sach Giao Khoa 10 . pdf
 
Interactive Powerpoint_How to Master effective communication
Interactive Powerpoint_How to Master effective communicationInteractive Powerpoint_How to Master effective communication
Interactive Powerpoint_How to Master effective communication
 
Activity 01 - Artificial Culture (1).pdf
Activity 01 - Artificial Culture (1).pdfActivity 01 - Artificial Culture (1).pdf
Activity 01 - Artificial Culture (1).pdf
 

Finishing and cementation /certified fixed orthodontic courses by Indian dental academy

  • 2. INDIAN DENTAL ACADEMY Leader in continuing dental education www.indiandentalacademy.com www.indiandentalacademy.com
  • 3. Contents Introduction Procedures Abrasives Zones of the casting Cementation Ideal requirements Types Conclusion References www.indiandentalacademy.com
  • 4. The unpolished surface is relatively rough, and a series of finishing procedures are needed to produce a highly polished surface to limit the accumulation and retention of plaque and facilitate maintenance the health the supporting periodontal tissues. www.indiandentalacademy.com
  • 5. Cast metal restorations needs a series of finishing procedures before try in and cementation. 1. 2. 3. 4. 5. Preliminary procedures Try in and adjustment Pre cementation polishing Cementation and Post cementation polishing. www.indiandentalacademy.com
  • 6. ABRASIVES AND POLISHING MATERIALS Abrasion : It is the smoothening of rough surface before preparing it for polishing. The smoothening is carried out by cutting action. www.indiandentalacademy.com
  • 7. COMMON ABRASIVES USED 1. Diamond: chips are bound to a metal shape by ceramic bond or electroplating.hardest of all abrasives used on enamel or porcelain. www.indiandentalacademy.com
  • 8. 2. Silicon carbide: basic material for carborundom. It is sintered or pressed with a binder into grinding wheels or discs. www.indiandentalacademy.com
  • 9. 3. Emery: it is a mixture of aluminium oxide and iron oxide.Hard and black natural mineral can be used on gold and porcelain. www.indiandentalacademy.com
  • 10. 4. Garnet: several minerals having similar properties.used for grinding plastics and metal alloys. 5. Sand paper: form of quartz,rounded or angular in shape.they are typically bonded to Paper discs for grinding metals and plastics. www.indiandentalacademy.com
  • 11. 6. Aluminium oxide: common abrasive used in dentistry in the form discs and strips. It is also impregnated into rubber wheels and points. Used to adjust enamel or finish metal alloys and ceramic materials www.indiandentalacademy.com
  • 13. Zone-1 Internal margins: Objective: To minimize any dissolution of the luting agent, a 1mm wide band of metal must be obtained that is closely adapted to the tooth surface. www.indiandentalacademy.com
  • 14. Here we should inspect the internal portion for small nodules or bubbles and should be removed with a hand piece using round bur,but care should be taken to avoid damage to the margin and annoying remakes. www.indiandentalacademy.com
  • 15. Zone-2 Internal surface: Objective: is that no contact should exist between the disc and the internal surface of the casting. It should be examined for the nodules. www.indiandentalacademy.com
  • 16. Nodules should be removed with a round bur and carefully seated on the die. Force should not be applied as any nodule present may scratch the die and this will result in a restoration with poor margins and poor prognosis. www.indiandentalacademy.com
  • 17. In the areas of the nodule, deliberate removing of slightly greater amount of alloy is recommended and should be removed in one single step. www.indiandentalacademy.com
  • 18. Marking agents Several agents are commercially available to facilitate identifications seating interference between the casting and die. 1.Water soluble dies eg;ligna mark. 2.Solvent based dies eg;accufilm 3.Powdered sprays eg;occludent 4.A suspension of rouge in chloroform. www.indiandentalacademy.com
  • 19. Zone-3 The sprue: Objective; Is to establish proper coronal morphology and function. A corborundum separating disk is used to cut the sprue Cutting should be done circumferentially Excess in the area of the sprue attachment is removed with the disk, and the area is refined with stones and sandpaper disks www.indiandentalacademy.com
  • 21. Zone-4 Proximal contacts Objective: is to adjusted so that they will be in correct when evaluated in the mouth. Proximal contacts on the stone cast can be achieved by careful scraping of the adjacent teeth with a blade. www.indiandentalacademy.com
  • 22. Articulating strips between adjacent castings or between the castings and the adjacent tooth is helpful, as it allows the areas where binding contact occurs to be adjusted through grinding. www.indiandentalacademy.com
  • 23. Connectors The connectors require special attention when fixed partial denture is finished Periodontal health is compromised if they are not properly contoured and finished. Parabolic configuration www.indiandentalacademy.com
  • 24. Rotary instruments such as rubber wheels, which allows access to the cervical margin are used so that they do not jeopardize the margins www.indiandentalacademy.com
  • 25. Zone-5 Occlusal surface Objective is to re-establish Occlusal contacts in static and dynamic relationship to the opposing arch. Occlusal contacts are checked with Mylar articulating strips. Occlusal prematurities are a result of excessive heavy contact on the wax pattern as the wax is subject to elastic recovery. www.indiandentalacademy.com
  • 26. The adjustments are done with flame shaped finishing burs.The entire ridge or cusp should be redeveloped rather than grinding only the point of interference. After refinement of the Occlusal contacts ,they should be altered with extensive polishing. www.indiandentalacademy.com
  • 27. Zone-6 Axial walls Objective: The axial walls should be smoothly contoured and polished so that the patient can carry out plaque control. Surface defects are removed by grinding with abrasive particles Polishing should be carried out by using the abrasives in a sequence. The finer abrasive should be used last because the coarser grits will remove material www.indiandentalacademy.com efficiently
  • 28. Zone-7- External margins Objective: for the restorations longevity. Cavo-surface margins should be finished directly on the tooth. Those parts that cannot be finished on the tooth should be finished on the disc The edges of the margin should not be distorted www.indiandentalacademy.com
  • 29. A fine grit stone is used to remove casting roughness, followed by soft rubber wheel and finally by rouge or a brush, during all these procedures, the casting should be supported by the finger. www.indiandentalacademy.com
  • 30. Once the laboratory procedures are completed the restoration should be evaluated in the patient’s mouth before final finishing and cementation •It should be evaluated for the following: 1.Proximal contacts 2.Margin integrity 3.Stability 4.Internal fit 5.External contour 6.Occlusion 7.Surface finish www.indiandentalacademy.com
  • 31. Proximal contacts Proximal contacts should be like those of natural teeth Use of floss is a convenient method to compare the contacts If the floss does not pass, the contact is too tight Ideal contact should allow for positional stability of the abutments and adjacent teeth as well as easy maintenance of the supporting structures www.indiandentalacademy.com
  • 32. EXCESSIVE TIGHTNESS. 1. Metal restorations Adjustments are made with rubber wheel. The satin finish produced helps to identify where binding occurs because a shiny spot will appear where adjustment is necessary. www.indiandentalacademy.com
  • 33. 2.porcelain restorations If high proximal contact in unglazed porcelain is easily adjusted with cylindrical mounted stone. Area identified by red pencil. If adjustment of glazed porcelain is needed, it can be polished with diamond impregnated silicone points or diamond polishing paste www.indiandentalacademy.com
  • 34. Deficiency Usually corrected by soldering. Armamentarium: Soldering tweezers Gold solder Paste flux Bunsen burner Antiflux and polishing armamentarium www.indiandentalacademy.com
  • 35. 1. 2. 3. 4. Roughening the area with disk Adding antiflux- granite Roughened surface is painted with flux Then the casting is held on the bunsen flame at the height of the reduction portion of the flame www.indiandentalacademy.com
  • 36. 5. As the solder heats up it starts to fuse and rapidly spread. It should be tipped to help the solder flow in the desired direction. 6. Proximal contact is then readjusted. www.indiandentalacademy.com
  • 37. Porcelain restorations Deficient porcelain contact requires additional fixing, it is at bisque stage. If restoration has been completely finished, add on or convection porcelain can be used www.indiandentalacademy.com
  • 38. Margin integrity The completed restoration should go into its place without binding and the best adaptation should be at its margins. A sharp explorer moved from restoration to tooth and from tooth to restoration can be evaluated for marginal adaptation. www.indiandentalacademy.com
  • 40. Stability The restoration should be checked for stability. It should not rock or rotate, any degree of instability is likely to cause failure during function. www.indiandentalacademy.com
  • 41. Occlusion The occlusion contact with the opposing teeth is carefully checked.any undesirable eccentric contacts as well as centric interferences must be identified. Use of two different colored ribbon tapes or articulating paper is used for excursive movements and centric contacts. Ant interferes are then corrected with diamond or white stone www.indiandentalacademy.com
  • 42. Ceramic restorations Ceramic restorations need certain additional steps during evaluation to satisfy esthetic, biologic and mechanical requirements. Contour, surface characteristics and color match. www.indiandentalacademy.com
  • 43. Contour The contours of the gingival third is verified Excessive bulk may be associated with periodontal disease When adjustment is necessary porcelain and metal should not be grounded together. www.indiandentalacademy.com
  • 44. If at all grinding both is absolutely necessary, the direction of grinding is parallel to the metalceramic junction. The incisal edge should be checked for proper position and shape This is the key for good esthetics and function. www.indiandentalacademy.com
  • 45. The negative space should be evaluated (incisal embrasures) The absence of embrasures draws attention to the prosthesis When viewed from the incisal inter proximal embrasures should be as narrow and deep as possible www.indiandentalacademy.com
  • 46. Cementation Cement: Binding agent used as a substance to make objects to adhere to each other, or something serving to firmly unite. GPT-8 Luting agent: Material that on hardening will fill a space or bind adjacent objects. GPT-8 www.indiandentalacademy.com
  • 47. Cementation- The process of attaching parts by means of cement or attaching a restoration to natural teeth by means of cement.GPT-7. Luting materials play a central role in indirect dentistry by aiding the retention of restorations and in the prevention of leakage at their margins. www.indiandentalacademy.com
  • 48. The ideal luting material should be: Bio- compatible with the tissues Adhere to tooth surface and restoration either chemically, mechanically or both. Prevent leakage by producing a good marginal seal Have sufficient mechanical properties to resist forces transmitted to the lute through the restoration that is it should have high tensile and compressive strength, high fracture toughness and fatigue strength and a modulus of elasticity which is appropriate for stress absorption www.indiandentalacademy.com
  • 49. Be cariostatic Be insoluble in the dilute organic acids Resist water sorption Be available in sufficient range of shades Achieve optimal physical properties as quickly as possible Allow easy removal of excess and clean- up www.indiandentalacademy.com
  • 50. It should have sufficiently low film thickness, so that the restoration may seat fully. Should have radio-opacity similar to or greater than dentine Additionally the luting cement should be technique insensitive www.indiandentalacademy.com
  • 51. They can be classified according to the material from which they are formed and more generally, as active and passive. www.indiandentalacademy.com
  • 52. Active luting materials They are bonded both to tooth and restoration make the restoration and tooth synergistic and there by play a role in the retention of the restoration,as well as sealing its margins and filling the space between restoration and tooth. www.indiandentalacademy.com
  • 53. Passive luting materials They merely fill the gap between the indirect restoration and tooth, with no chemical adhesion at the restorative or lute and or tooth or lute interface. www.indiandentalacademy.com
  • 54. PASSIVE LUTING MATERIALS Zinc phosphate cement: Oldest of the currently available luting materials Powder- liquid material has zinc oxide as the main constituent of the powder and liquid is an aqueous solution of phosphoric acid. Zinc oxide powder react with phosphoric acid to form an insoluble phosphate www.indiandentalacademy.com
  • 55. Setting time can be lengthened by mixing on a chilled glass slab and working time can be prolonged by adding small increments of powder to the liquid PH of freshly mixed cement is between 1.6 – 3.6. Clean – up is relatively simple, as the setting cement reaches a rubbery stage and can be peeled off the restoration. Compressive and tensile strengths are adequate but the solubility of the set material is high in solutions of lower ph. Another major disadvantage is the lack of adhesion to the tooth surface. www.indiandentalacademy.com
  • 56. Zinc-polycarboxylate Fore runner to glass ionomer cements Introduced by SMITH in 1968, showed true adhesive attachment by molecular bonding to tooth structure. Based on the reaction of zinc oxide and polyacrylic acid to form zinc polyacrylate www.indiandentalacademy.com
  • 57. Clean –up is difficult as it will stick to the mucosa and should be removed as soon as possible after placement. They are as strong as zinc phosphate with higher tensile strength, however, they are more soluble than zinc phosphate and may absorb water. www.indiandentalacademy.com
  • 58. Glass ionomer cements The first glass ionomer cements were developed in 1978 These cements contain anion- leach able fluoroalumino-silicate glass which reacts with a water soluble polymeric acid The outer layer of glass particles are decomposed leading to release of Ca+,Al+ and F- ions.thus the set cement is therefore a core of unreacted glass particles sheathed by a siliceous hydro gel bounded together by the reaction products. www.indiandentalacademy.com
  • 59. These materials also release fluoride. The value of this fluoride release in cariostatic is questionable. These cements adhere to enamel and dentin and contribute to the retention of the restoration. 2030% higher retention than zinc phosphate or zinc polycarboxylate cement. However these cements have been reported to cause inflammatory response in pulpal tissue under deep restorations They have superior compressive strength but their tensile strength is low and fracture toughness is also low www.indiandentalacademy.com
  • 60. Resin modified glass ionomer cements These materials were developed to overcome some of the short comings of traditional glass ionomer cements In addition to components of glass ionomer they contain a monomer such as 2 hydroxy-ethyl methacrylate (HEMA) or BIS-GMA. www.indiandentalacademy.com
  • 61. Advantages over Conventional Glass Ionomers are: Improved bio-compatibility Better fluoride release Improved adhesion to tooth and Improved physical properties, specially tensile strength Clean- up is easy as it goes through a rubbery phase.eg: Fujiplus,Fuji-cem and rely-X www.indiandentalacademy.com
  • 62. Active luting agents Resin based luting materials These cements bond to the tooth by the cure of dentin – bonding agent. These materials may also be bonded to a ceramic surface which has been rendered micro-mechanically retentive by treating with acids such as hydrofloric acid, while bonding to metal surfaces may be achieved by oxidising ortin plating gold surfaces www.indiandentalacademy.com
  • 63. Bonding is usually achieved with organophosphates, HEMA or 4-META(4-methacryl ethyl trimellitic anhydride) www.indiandentalacademy.com
  • 64. Their physical properties include= Excellent compressive and tensile strength and fracture toughness Low solubility in oral fluids Low potential for microleackage when bonded to a tooth by an intermediary bonding systems. High bio-compatibility when used with dentin bonding systems www.indiandentalacademy.com
  • 65. CHOICE OF LUTING AGENT Zinc – phosphate 1. Cast restorations 2. Normal conservatively prepared tooth www.indiandentalacademy.com
  • 66. Zinc polycarboxylate cement 1. Recommended on retentive preparations with minimal pulp irritation. Eg: children with large pulp chambers. www.indiandentalacademy.com
  • 67. Glass ionomer cement Popular for luting cast restorations www.indiandentalacademy.com
  • 68. Resin modified glass ionomer luting agents Most popular because low solubility and low micro leakage and reduced post cementation sensitivity. www.indiandentalacademy.com
  • 69. Adhesive resin Material of choice with all ceramic restorations. www.indiandentalacademy.com
  • 70. Cementation with zinc phosphate The field must be dry Isolated with cotton rolls Protection of pulp by application of varnish|dentin bonding agent Mixing done by adding increments Mixing done on a wide area www.indiandentalacademy.com
  • 71. When the consistency is right,load the cement on to the restoration. Tell the patient to put force to the Occlusal surface by closing on a plastic wafer. Once the cement has set remove the excess with explorer. www.indiandentalacademy.com
  • 72. Cementation with polycarboxylate Isolate the quadrant Blot dry the tooth Dispense proper powder-liquid ratio Spatulation should be complete in 30 secs Cement is coated on the inside of the casting and seated on the tooth. www.indiandentalacademy.com
  • 73. Cementation with glass ionomer Clean and dry the tooth The preparation can be dried with pumice to increase retention. Powder liquid ratio is 3.4:1 Mixing should be fast,applied on to the restoration and seat the crown. Excess cement removed after it has become brittle www.indiandentalacademy.com
  • 74. Resin cements For metal restorations Air abrade the the inside of the crown,rinse it and dry it. Dentin activator is appliued for 10 secs Base catalyst ratio is 4:1,to this 2 scoops of powder is added and stirred gently for 5 secs to produce a creamy mixture Apply the cement onto the restoration and placed over the tooth.10 mins is the setting time. www.indiandentalacademy.com
  • 75. Ceramic restorations Crown is is silaned by applying the silane agent onto the internal surface of the crown. The prepared tooth is cleaned with pumice washed and dried. Etch the enamel,rinse for 30 secs Apply primer to dentin and polymerize for 30 secs Dispense equal amount of base and catalyst mix for 20 secs,apply thin layer onto the internal surface of the crown and seat the crown Light cure at marginal areas from facial,lingual and Occlusal directions. www.indiandentalacademy.com
  • 76. Conclusion When a restoration is tried in the mouth the proximal contacts,margin integrity,and occlusion must be verified. With metal ceramic restorations the contour in the cervical third is critical for the maintenance of health of supporting structures. Proper shaping of gingival and incisal embrasures will improve the esthetics. www.indiandentalacademy.com
  • 77. No matter what type of cement is used for cementation,proper moisture control is essential . Cement should be protected from moisture during initial set,and removal of excess from the gingival sulcus is critical for continued periodontal health. Active luting, in which the material bonds the restoration to the tooth is the most desirable feature, which make the resinbonded the material of choice but they are technique sensitive. www.indiandentalacademy.com
  • 78. References Contemporary Fixed ProsthodonticsRosenstiel Fundamentals Of Fixed ProsthodonticsShilling burg Trends In Indirect Dentistry-Dental Update 2005. www.indiandentalacademy.com
  • 79. Thank you www.indiandentalacademy.com Leader in continuing dental education www.indiandentalacademy.com