The Indian Dental Academy is the Leader in continuing dental education , training dentists in all aspects of dentistry and
offering a wide range of dental certified courses in different formats.for more details please visit
www.indiandentalacademy.com
Asian American Pacific Islander Month DDSD 2024.pptx
Dental VTO
1. The Dental VTO: An Analysis ofThe Dental VTO: An Analysis of
Orthodontic Tooth MovementOrthodontic Tooth Movement
RICHARD P. McLAUGHLIN, DDSRICHARD P. McLAUGHLIN, DDS
JOHN C. BENNETT, LDS, DOrthJOHN C. BENNETT, LDS, DOrth
www.indiandentalacademy.com
2. Most cephalometric analyses measure
Maxillary and mandibular skeletal
relationships in the vertical and horizontal
planes, along with the position and
angulation of the incisors
www.indiandentalacademy.com
3. But when were are rendering treatment to theBut when were are rendering treatment to the
patient we are more bothered about the amountpatient we are more bothered about the amount
and and direction of growth of the skeletal basesand and direction of growth of the skeletal bases
that we are altering .that we are altering .
www.indiandentalacademy.com
4. • We must remember that we as orthodontist notWe must remember that we as orthodontist not
only correct jaw bases are also mainly involvedonly correct jaw bases are also mainly involved
in the movment and correction ot the invidualin the movment and correction ot the invidual
teeth.teeth.
• For seketal correction we usually make a detailedFor seketal correction we usually make a detailed
plan about the direction and amount of ofplan about the direction and amount of of
growth to be madegrowth to be made
www.indiandentalacademy.com
5. Few orthodontic analyses, however, provideFew orthodontic analyses, however, provide
information about the direction and amount ofinformation about the direction and amount of
dental movements required during treatmentdental movements required during treatment
within the maxillary and mandibular archeswithin the maxillary and mandibular arches
www.indiandentalacademy.com
6. The dental analysis presented in this articleThe dental analysis presented in this article
——in effect, a dental Visualized Treatmentin effect, a dental Visualized Treatment
Objective—was designed to provide organizedObjective—was designed to provide organized
and simplified information to help in diagnosis,and simplified information to help in diagnosis,
treatment planning, and the extraction/nonextractiontreatment planning, and the extraction/nonextraction
decision. It should be used as an adjunctdecision. It should be used as an adjunct
to, but not a substitute for, conventional cephalometricto, but not a substitute for, conventional cephalometric
analyses.analyses.
www.indiandentalacademy.com
7. Progress can be checked by referring to the
dental VTO at the patient’s regular adjustment
appointments.
www.indiandentalacademy.com
8. Without this information,the orthodontist
can lose sight of the anchorage
requirements of a case and thus
underestimate the amount of patient
cooperation and anchorage needed to
reach treatment objectives.
www.indiandentalacademy.com
10. The dental VTO consists of three charts:
Chart 1 records the initial midline and first
molar positions with the mandible in centric
relation.
Chart 2 measures the lower arch discrepancy,
Chart 3 records the anticipated treatment
change in terms of dental movements of the
first molars, canines, and midlineswww.indiandentalacademy.com
13. Chart 2 measures the lower arch discrepancy.
The four primary factors in each case are:
1. Space required for relief of crowding, measured
from canine to midline and from first molar to
midline on each side.
2. Space required for the desired correction of
protrusion or retrusion of the mandibular
incisors.
www.indiandentalacademy.com
14. 3. Space required for leveling the curve of Spee,
measured as the deepest point on a line
extending from the distal cusps of the second
molars to the incisal edges of the central incisors
on each side; this point is normally found in the
premolar region .
4. Space required for midline correction.
www.indiandentalacademy.com
15. Four secondary factors that can sometimes
provide additional space are listed, if applicable,
below the primary chart:
1. Additional space from interproximal enamel
reduction.
2. Additional space from uprighting or distal
movement of mandibular first molars.
www.indiandentalacademy.com
16. 3. Additional space from buccal uprighting of
mandibular canines and posterior teeth.
4. Additional leeway or “E” space.
www.indiandentalacademy.com
17. According to Moorrees, the leeway space,
or the difference in size between the deciduous
canines, first molars, and second molars and the
permanent canines, first premolars, and second
premolars, is an average of 1.5mm per side in the
mandibular arch and 0.9mm per side in the
maxillary arch.
www.indiandentalacademy.com
18. E space, or the difference
in size between the
primary second molar and
the permanent second
premolar, is an average of
2.5mm per side in the
mandibular arch and
2.3mm per side in the
maxillary arch .
www.indiandentalacademy.com
21. Chart 3 records the anticipated treatment change in terms
of dental movements of the first molars, canines, and
midline.
www.indiandentalacademy.com
22. According to the authors There are four possibleAccording to the authors There are four possible
methods of Class II molar correction in themethods of Class II molar correction in the
growing patient:growing patient:
a.a. Mesial movement of the mandibular firstMesial movement of the mandibular first
molars .molars .
b.b. Distal movement of the maxillary firstDistal movement of the maxillary first
molars.molars. This is difficult in the presence ofThis is difficult in the presence of
developing maxillary second and third molars, butdeveloping maxillary second and third molars, but
it can be achievedit can be achieved..
www.indiandentalacademy.com
23. c.c. Limiting forward maxillary skeletalLimiting forward maxillary skeletal
development, or retracting the maxilladevelopment, or retracting the maxilla..
Because such changes are difficult to isolate, it isBecause such changes are difficult to isolate, it is
debatable how much is skeletal (above the palataldebatable how much is skeletal (above the palatal
plane) and how much is dentoalveolar (belowplane) and how much is dentoalveolar (below
thepalatal plane).thepalatal plane).
Nasion normally grows forward about 1mm a yearNasion normally grows forward about 1mm a year
relative to sella, while A point may be maintained orrelative to sella, while A point may be maintained or
retracted relative to its original position.retracted relative to its original position.
www.indiandentalacademy.com
24. d.d. Forward mandibular rotation.Forward mandibular rotation. This can occur in twoThis can occur in two
ways:ways:
1)1) Mandibular growth. The direction of overall facialMandibular growth. The direction of overall facial
growth is critical to the “expression” of mandibulargrowth is critical to the “expression” of mandibular
growth.growth.
With more vertical patterns, there is less forwardWith more vertical patterns, there is less forward
expression of mandibular growth and hence lessexpression of mandibular growth and hence less
interarch dental change.interarch dental change.
With less vertical facial growth, mandibular growth isWith less vertical facial growth, mandibular growth is
expressed in a more forward direction, resulting inexpressed in a more forward direction, resulting in
greater interarch dental change.greater interarch dental change.
www.indiandentalacademy.com
25. 2)2) Limiting vertical maxillary development.Limiting vertical maxillary development.
difficult to significantly influence the normaldifficult to significantly influence the normal
vertical development of the facial complex.vertical development of the facial complex.
As with forward maxillary development, verticalAs with forward maxillary development, vertical
development is hard to measure in isolation anddevelopment is hard to measure in isolation and
therefore hard to categorize as skeletal ortherefore hard to categorize as skeletal or
dentoalveolar. Nevertheless, even a smalldentoalveolar. Nevertheless, even a small
limitation can greatly enhance a Class IIlimitation can greatly enhance a Class II
correction.correction.
www.indiandentalacademy.com
26. If favorable mandibular growth occurred in any ofIf favorable mandibular growth occurred in any of
the ways listed above, maxillary anchorage controlthe ways listed above, maxillary anchorage control
could be reduced or eliminated, allowing thecould be reduced or eliminated, allowing the
maxillary molars to move more mesially.maxillary molars to move more mesially.
www.indiandentalacademy.com
30. The mandibular arch showed
3mm of crowding on the right
side, all mesial to the right
canine.
On the left side, there was only
1mm of crowding, also between
the canine and the midline.
www.indiandentalacademy.com
31. The curve of Spee was about
2mm at its deepest point.
Leveling a 2mm curve of
Spee would advance the
incisors 1mm, thus requiring
1mm of space per side for
the leveling process.
The lower midline was
deviated 1mm to the right, the
midline correction would
require 1mm of space on the
left side and provide 1mm of
space on the right.www.indiandentalacademy.com
32. The mandibular incisors were inclinedThe mandibular incisors were inclined
forward (97° to the mandibular plane)forward (97° to the mandibular plane)
and were 6mm in front of the APoand were 6mm in front of the APo
line.line.
Without extractions, the incisorsWithout extractions, the incisors
would either remain in this position or,would either remain in this position or,
more likely, be advanced farther.more likely, be advanced farther.
With extractions, the incisors could beWith extractions, the incisors could be
retracted.retracted.
Therefore, the decision was made toTherefore, the decision was made to
extract the four first premolars andextract the four first premolars and
retract the mandibular incisors 2mm.retract the mandibular incisors 2mm.
www.indiandentalacademy.com
33. The space-gaining procedures of interproximalThe space-gaining procedures of interproximal
reduction, molar uprighting, and buccalreduction, molar uprighting, and buccal
uprighting of posterior teeth were not needed inuprighting of posterior teeth were not needed in
this case and were therefore not recorded inthis case and were therefore not recorded in
Chart 2.Chart 2.
There was no leeway or “E” space available, sinceThere was no leeway or “E” space available, since
no primary teeth were present.no primary teeth were present.
www.indiandentalacademy.com
35. Anticipated treatment changesAnticipated treatment changes
were recorded in Chart 3 using thewere recorded in Chart 3 using the
following process:following process:
1. Extraction of the four first1. Extraction of the four first
premolars produced 7mm ofpremolars produced 7mm of
space in each quadrant, sincespace in each quadrant, since
there was no crowding betweenthere was no crowding between
the canines and first molars inthe canines and first molars in
either arch. This was indicated byeither arch. This was indicated by
writing “(7)” in each quadrant.writing “(7)” in each quadrant.
www.indiandentalacademy.com
36. .Because the total lower.Because the total lower
arch discrepancyarch discrepancy
from canine to midline wasfrom canine to midline was
5mm per side, the5mm per side, the
mandibular canines neededmandibular canines needed
to be retracted 5mmto be retracted 5mm
into the extraction sites.into the extraction sites.
This was recorded on theThis was recorded on the
bottom of the chart, withbottom of the chart, with
arrows showing thearrows showing the
direction of movement.direction of movement.
www.indiandentalacademy.com
37. The mandibular midlineThe mandibular midline
needed to be movedneeded to be moved
1mm to the right, as1mm to the right, as
shown by the arrow onshown by the arrow on
the bottom of the chart.the bottom of the chart.
www.indiandentalacademy.com
38. 3. The mandibular molars could3. The mandibular molars could
therefore only be moved 2mm totherefore only be moved 2mm to
close the remainder of theclose the remainder of the
7mm extraction spaces—also7mm extraction spaces—also
indicated withindicated with
arrows on the bottom of thearrows on the bottom of the
chart.chart.
This demonstratedThis demonstrated
a need for moderate anchoragea need for moderate anchorage
control in the mandibular archcontrol in the mandibular arch
A mandibular lingual arch,A mandibular lingual arch,
for example, could be consideredfor example, could be considered
during the first 3mm of canineduring the first 3mm of canine
retraction.retraction.
www.indiandentalacademy.com
39. the molar relationship on the rightthe molar relationship on the right
side was 4mm Class II, and sinceside was 4mm Class II, and since
2mm could be corrected by mesial2mm could be corrected by mesial
movement of the mandibular molar,movement of the mandibular molar,
an additional 2mm of correctionan additional 2mm of correction
was required.was required.
On the left side, an additional 1.5mmOn the left side, an additional 1.5mm
of correction was needed.of correction was needed.
These amounts were recorded onThese amounts were recorded on
the top of Chart 3 with distal arrows.the top of Chart 3 with distal arrows.
www.indiandentalacademy.com
40. A palatal bar and a combination high-pullA palatal bar and a combination high-pull
and cervical-pull headgear were used to preserveand cervical-pull headgear were used to preserve
maxillary anchorage in this case.maxillary anchorage in this case.
www.indiandentalacademy.com
41. A functional appliance could also haveA functional appliance could also have
been considered before fixed appliance therapy.been considered before fixed appliance therapy.
A good response to the functional applianceA good response to the functional appliance
might have reduced the amount of maxillarymight have reduced the amount of maxillary
anchorage support needed later. Extractionsanchorage support needed later. Extractions
would still have been required after the functionalwould still have been required after the functional
phase, assuming incisor retraction was still aphase, assuming incisor retraction was still a
treatment objective.treatment objective.
www.indiandentalacademy.com
42. 2mm distal movement2mm distal movement
of the maxillary rightof the maxillary right
molar and the 1.5mmmolar and the 1.5mm
distal movement of thedistal movement of the
maxillary left molarmaxillary left molar
, the canines would have, the canines would have
to be moved 9mm on theto be moved 9mm on the
right andright and
8.5mm on the left to close8.5mm on the left to close
the extraction spaces.the extraction spaces.
www.indiandentalacademy.com
43. •A female patient age 8A female patient age 8
years and 4 monthsyears and 4 months
• Class II skeletal patternClass II skeletal pattern
•a low-angle patient witha low-angle patient with
a normal lower faciala normal lower facial
height.height.
•no crossbites,no crossbites,
www.indiandentalacademy.com
44. The patient’s molarThe patient’s molar
relationship was 4.5mmrelationship was 4.5mm
Class II on the rightClass II on the right
side and 2.5mm Classside and 2.5mm Class
II on the left (Chart 1).II on the left (Chart 1).
The dental midlinesThe dental midlines
were properly alignedwere properly aligned
www.indiandentalacademy.com
45. The mandibular arch showed 2.5mmThe mandibular arch showed 2.5mm
of crowding from the canines to theof crowding from the canines to the
midline on each side .midline on each side .
The leeway space in the mandibularThe leeway space in the mandibular
arch, due to the presence of thearch, due to the presence of the
primary canines and the first andprimary canines and the first and
second molars, was 1.5mm per side.second molars, was 1.5mm per side.
The loss of these teeth wouldThe loss of these teeth would
leave a total of only 1mm of crowdingleave a total of only 1mm of crowding
per side in the mandibular arch.per side in the mandibular arch.
www.indiandentalacademy.com
46. Mandibular incisors were 4mmMandibular incisors were 4mm
behind the APog line and at 87° to thebehind the APog line and at 87° to the
mandibular plane, the decision wasmandibular plane, the decision was
made to advance them 4mm, providingmade to advance them 4mm, providing
4mm of space per side.4mm of space per side.
The curve of Spee was about 1mmThe curve of Spee was about 1mm
deep bilaterally, requiring 0.5mm ofdeep bilaterally, requiring 0.5mm of
space per side for leveling.space per side for leveling.
No midline correction was needed.No midline correction was needed.
www.indiandentalacademy.com
47. Adding all these factorsAdding all these factors
together, there was a totaltogether, there was a total
lower arch discrepancy oflower arch discrepancy of
+1mm per side from+1mm per side from
canine to midline andcanine to midline and
+2.5mm per side from first+2.5mm per side from first
molar to midline.molar to midline.
www.indiandentalacademy.com
48. The mandibular canines couldThe mandibular canines could
advanced 1mm per side, and theadvanced 1mm per side, and the
molars could bea dvanced 2.5mmmolars could bea dvanced 2.5mm
per side (Chart 3).per side (Chart 3).
Thus, 2.5mm of the 4.5mm ClassThus, 2.5mm of the 4.5mm Class
II correction on the right sideII correction on the right side
could be achieved by mesialcould be achieved by mesial
movement of the mandibular firstmovement of the mandibular first
molar. The remaing space bymolar. The remaing space by
other methodsother methods
On the left side, the entire 2.5mmOn the left side, the entire 2.5mm
Class II correction could byClass II correction could by
achieved by moving theachieved by moving the
mandibular first molar forward.mandibular first molar forward.
www.indiandentalacademy.com
49. ConclusionConclusion
This simple analysis to be most helpful as a diagnosticThis simple analysis to be most helpful as a diagnostic
and treatment-planning aid and as a reference throughoutand treatment-planning aid and as a reference throughout
treatment.treatment.
It is also useful in making the extraction/nonextractionIt is also useful in making the extraction/nonextraction
decision.decision.
It can even been applied in some mutilated-dentitionIt can even been applied in some mutilated-dentition
cases, and in patients where second molars werecases, and in patients where second molars were
substituted for first molars, or premolars for canines.substituted for first molars, or premolars for canines.
www.indiandentalacademy.com