Standard vs Custom Battery Packs - Decoding the Power Play
High Voltage Electrical Compliance and Safety Operating Procedures
1. High Voltage
Electrical Compliance and
Safety Operating Procedures
Auckland
2 & 3 July 2015
Been to an IDC workshop before?
- Attend this workshop and you’ll receive 5% off the registration price!
TechnologyTraining that Works
Dr Tony Auditore
PhD Electrical Engineering
A 2-day practical workshop presented by:
Register NOW: Email the registration form to us at idc@idc-online.com
For more information contact (09) 263 4759 or visit www.idc-online.com
AUSTRALIA • CANADA • india • IRELAND
Malaysia • NEW ZEALAND • SINGAPORE • SOUTH AFRICA
UNITED KINGDOM • UNITED STATES • VIETNAM
EARLY BIRD
BOOKING OFFER
TOTAL VALUE TO YOU - $
529.60
Book by 4 June 2015 and
you will receive 15% off the full
registration price + 4 ebooks
each with hundreds of pages of
engineering knowledge
• High Voltage Design and
Installations Master Class
• Practical HV and LV Switching
Operations and Safety Rules
• HV Circuit Breaker Operating
Mechanisms - Pneumatic and
Compressor Systems
• High Voltage Safety Operating
Procedures for Engineers and
Technicians
4-for-3
BOOKING OFFER
plus
our
Only
$
1764 per person
excluding GST
what You will learn:
• Knowledge of safety rules/regulations applicable in your workplace
• How to identify the electrical hazards and take steps to achieve zero
risk
• Evolve enterprise safety policies and implement them by taking
appropriate safety management steps
• Plan electrical installations with in-built safety measures
• Ensure safety through proper safety procedures in operation and
maintenance
• Conduct safety audits in the workplace to detect systemic issues
who should attend:
• Design engineers
• Electrical operators
• Maintenance technicians
• Plant electrical engineers
• Project engineers
• Testing and commissioning engineers and technicians
2. Tony is currently employed by LineTech Power Engineering Group as a
Principal Consultant. He obtained a Doctorate in Philosophy (Electrical
Engineering) at the University of Stellenbosch South Africa. Initially
studied at Vaal Triangle Technical University where he achieved a
Laureatus in Technology (Doctorate in Technology). Thereafter he
obtained a Bachelor in Commerce, and an Advanced Executive
Programme (AEP).
Tony has worked for ESKOM, ASEA ELECTRIC (SA) LTD and HUBERT DAVIES CONSTRUCTION
(PTY) LTD. Has obtained diverse engineering experience in high voltage research and
development, engineering design and installation of high voltage cables, design and project
management of high voltage substations and overhead lines, construction, manufacturing,
network operational computer simulation, maintenance of electrical plant and equipment (up to
533kV DC & 400kV AC) and asset management consulting. He has written and presented
international technical papers and publications on overhead line design, practices and their
effects on the environment. Tony was responsible for the insulation coordination of the
transmission network of up to and including 765kV. His additional responsibilities included
international benchmarking and comparative performance studies of international electric
utilities. He has lectured part-time to M.Sc. (Power Engineering) students in the field of
performance and maintenance as well as electricity utility network refurbishment. Tony has also
co-authored international technical books on transmission lines and transformer maintenance.
High Voltage Electrical Compliance
About IDC Technologies
Visit our WEB SITE
www.idc-online.com to download
FREE software and technical information
With a portfolio of over 300 workshops
specialising in the fields of industrial data
communications, electrical and mechanical
engineering, automation and control, we have
trained over 500,000 engineers, technicians
and technologists over the last 20 years.
Wehaveanenthusiasticteamofprofessionals
in offices conveniently located around the
world, who are committed to providing the
highest quality of engineering and technical
training.
On-Site Training
All IDC Technologies training workshops are
available on an on-site basis, presented at
the venue of your choice, saving delegates
travel time and expenses, thus providing
your company with even greater savings.
SAVE MORE THAN 50% OFF
the per person cost!
2-day courses start from <$6,000
for up to 5 people, and can be
customised to your needs
Have the training delivered
WHEN AND WHERE you need it!
For more information or a FREE detailed
proposal contact:
Kevin Baker on (09) 263 4759
or email: training@idc-online.com
An intensive, practical 2-day workshop presented by
Dr Tony Auditore PhD Electrical Engineering
Free reference manual
as a hard-copy and eBook (Valued at $239.90)
Our delegates don’t just receive photocopied notes!
You will receive the comprehensive fully illustrated reference manual,
as a hard-copy and eBook version, filled with hundreds of pages
of tables, charts, figures and handy hints.
Discount Offer
SAVE $1764
* discounted and free registration to be
used for the same workshop
in the same venue
Book four delegates
pay for three!
Register three people on a
public two-day workshop and
receive your fourth registration
FREE
PLUS 5 eBooks of
your choice!
Every delegate will also receive
5 eBooks of their choice
from IDC’s technical library
– valued at $450!
the workshop
Employeesperformingoperationsandmaintenanceworkonhighvoltageelectricaltransmission
and distribution systems are exposed to a greater hazard than most other employees. In
industry the majority of safety rules and regulations originated from the painful experience of
workers who suffered serious injuries or even death. Therefore, rules should not be seen as a
means of limiting our freedom, but should rather be looked upon as valuable advice to ensure
safe working conditions. This training workshop covers the basic procedures in working safely
on high voltage systems including the aspects of safety management and safety auditing.
Pre-requisites
• A fundamental knowledge of electrical engineering
• Some experience in operation and maintenance of electrical equipment and/or
electrical networks
objectives
The workshop aims to impart a thorough overall knowledge of working safely on high voltage
installations and the various related topics including:
• Safety legislation
• Electrical hazards and safety management
• Technical aspects of electrical safety
• Safety in operation and maintenance
• Importance of periodic inspection of electrical installations for ensuring safety
• Safety audits to detect shortcomings
The workshop will include hands-on practice in safety documentation such as development of
switching plans and electrical access permits of different types.
3. The fee for each workshop covers all materials
including workshop manual, lunches
and refreshments
and Safety Operating Procedures
The program
practical sessions
This is a practical, hands-on workshop enabling you to work through exercises which reinforce
the concepts discussed. Sessions include:
• Development of switching plans
• Operating mechanisms
• Permits to work
• Sanctions for test
• Working party control
• Abnormal event scenarios and how to remedy
To gain full value from this workshop, please bring your laptop/notebook computer.
Day ONE
UK LEGISLATION, INCLUDING ON SHORE
AND OFF SHORE REQUIREMENTS
• Health and Safety at Work Act
• PUWER regulations
• Electricity at Work Regulations
• Enforcement Management Model (EMM)
• Protocol on work related deaths
• Risk gap
OVERVIEW OF BASIC SAFETY
REQUIREMENTS
• Risk, danger, shock and burn
• HV consequences
• Zero risk approach
• Elimination, substitution, control, PPE
MANAGEMENT ASPECTS
• Safety policy, objectives
• Risk assessments and method statements
• Competence
• Training and retraining
• Authorisation including levels of
authorisation
• Authorising engineer
• Competent persons
• Authorised persons
• Senior authorised persons
• Communication
• Audit and review
Day TWO
EQUIPMENT ASPECTS
• Power system fundamentals
• Circuit breakers and switches
• Operating mechanisms
• Instrumentation, test equipment and
testing points
• Standard rating factors, plain break / arc
suppression systems
• Insulation types, vacuum, air, SF6
• Protection systems
• System earthing
• Commissioning procedures
• Test equipment
OPERATIONAL ASPECTS
• Rules, procedures and instructions
• Method statements, risk assessments etc
• Switching plan and possibility of back
feeding etc
• Safety documents: permits to work,
sanctions for test, limitation of access
• Duties of permit issuer and recipient
• Working party control
• Isolation, lockout / tagout
• Caution and danger notices
• Proof of dead
• Safety earthing
MAINTENANCE, INSPECTION AND TEST
• Specification for maintenance and
inspection routines and frequencies
AUDIT AND REVIEW
• Internal or external audit of procedures,
rules etc to ensure they are “fit for
purpose”
• Safety document audit
• Inspection of equipment, locks, notices
etc.
• Audit of persons, training records,
authorisations etc.
SUMMARY, OPEN FORUM
AND CLOSING
4. Web Site:
www.idc-online.com
Email:
idc@idc-online.com
Mail:
IDC Technologies, PO Box 76142
Manukau City 2241
New Zealand
Fax:
(09) 262 2304
Register
Now:
Enquiries:
Phone:
(09) 263 4759
Contact: Company Name:
Company Address:
Suburb: City: Post Code:
Phone: Fax: Email:
Mr/Ms: Job Title: Email:
Mr/Ms: Job Title: Email:
Mr/Ms: Job Title: Email:
Mr/Ms: Job Title: Email:
Should you have more people interested in attending this workshop, please contact us via email: idc@idc-online.com
Delegate Details
High Voltage Electrical Compliance and Safety Operating Procedures
www.idc-online.com
Workshop details
• Workshops start at 8:30am and finish at 5:00pm daily.
• Registration is from 8:00am on the first day.
• The workshop fees are per delegate and include a refer-
ence manual, handouts, lunches and all refreshments.
• Fullpaymentisrequiredpriortothecommencementofthe
workshop.
Early Bird BOOKING Offer
Please note that the Early Bird Booking Offer is only available
to those registrations received by 4 June 2015 and paid prior
to the commencement of the workshop.
Confirmation
Confirmation of receiving your registration will be sent within
48 hours. Official confirmation and details of the workshop
will be sent to you prior to the workshop date. Please wait for
official confirmation before making accommodation and/or
travel arrangements.
Cancellation
A fee of 20% will apply for written cancellations received
7-14 days prior to the commencement of the workshop.
Cancellations received less than 7 days prior to the workshop
are not refundable however substitutes are welcome.
Please Note
Venuestobeconfirmeduponregistration.Venuesaresubject
to change. Instructors may change without notice.
IDC Technologies has no affiliation with suppliers or
manufacturers and therefore presents a completely unbi-
ased factual view of the industry.
100% MONEY BACK GUARANTEE
IDC Technologies’ engineers have put considerable time and
experience into ensuring that you derive the maximum value
from each workshop. If you feel by lunch time of the first day
that the workshop is not appropriate, please let us know so
that we can arrange a 100% refund of your fee.
Privacy Information
Ifyouraddressdetailsareincorrect,oryouwishtoremoveyour
name from our mailing list, please contact us by phone, fax
or email.
At times we make use of lists that cannot be cross-checked
against our own database and you may receive a duplicate. If
so, please pass this on to an interested colleague.
Continuing Professional Development (CPD)
This program is designed to meet your continuing
professional development requirements. A certificate
documenting your attendance will be awarded at the end of
the workshop. This serves as important evidence of your
continuing professional commitment to your career.
Attendees:
Auckland - 2 & 3 July 2015
Quality Hotel Parnell
Please register by 11 June
to avoid disappointment
Workshop Details
Register three people on a public two-day workshop and
receive your fourth registration FREE
* discounted and free registration to be used for the same
workshop in the same venue.
Discount offer - save $1764
- book 4 delegates, pay for 3!
Received a brochure in the mail
Received an email from IDC
Searched online (Google, Yahoo etc)
Recommended by a friend/colleague
Other (please specify) ________________________
______________________________________________
How did you hear about this
workshop? (PLEASE TICK)
BOOKING FOR ONE DELEGATE: $1764 x ______ delegates = $______________
BOOKING FOR four DELEGATES: $1764 x ______ delegates = $______________
The fourth participant is FREE
Early bird booking offer: (if booking on or before 4 June 2015)
YES, I qualify and would like to receive my 4 FREE eBooks
PLUS 15% OFF the registration price less 15% = $______________
+ GST = $______________
Total = $______________
On the reverse of your card, above the signature,
is a security number. In order to authorise your
card transaction, we require the last 3 digits:
If the Cardholder's address
is not the same as shown
above please tick this box:
Please Note: Full payment is required prior to the commencement of the workshop.
Payment Details Note: Prices are EXCLUSIVE of GST
I wish to pay by Cheque, made payable to IDC Technologies
Company Order Number: __________________________________
Please charge my Mastercard Visa Expiry Date: ____/_____
______________________________________________________________
Cardholder’s Name:
Cardholder’s Signature
My billing information is the same as above in 'DELEGATE DETAILS'
Please send invoice to: Company Name:
Company Address:
Suburb: State: Post Code:
billing information (PLEASE invoice to)
1
3