This slide briefly describes how to install DevStack Juno with Neutron using VirtualBox and Ubuntu.
The main difference from the two videos: http://youtu.be/zoi8WpGwrXM and http://youtu.be/1GgODv34E08 are 1) Juno, not Icehouse and 2) two NICs (NAT & Host-only) are used in Ubuntu virtual machine.
5. 5
Differences from the previous video
• Network configuration in VirtualBox
• Adapter 1: NAT (same)
• Adapter 2: Host-only
• IP configuration is needed
• Adapter 2: eth1
6. 6
Installation: DevStack
• Steps
• 1. Install Linux on VirtualBox
• 2. (basic upgrade on Linux)
• 3. Install git
• 4. git clone –b stable/juno
git://github.com/openstack-dev/devstack.git
• 5. cd devstack
• 6. (creating localrc file)
• 7. ./stack.sh
• 8. http://192.168.56.101 to connect to Horizon
[Sample localrc file download] wget -O localrc http://goo.gl/Y6OTR2
[NAT port forwarding using iptables] sudo iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE
Hello! My name is Ian from South Korea.
OpenStack Juno was released on October 16th. It was the last Thursday night in Korea.
So, I tested DevStack Juno release installation, and I have found that Juno completely works well with DevStack.
Before watching this video, please refer to my 2 previous videos.
The main purpose of the first video is to show how to install VirtualBox and Ubuntu before actually installing DevStack.
And in the 2nd video, I showed how to install DevStack for Icehouse release, with Neutron.
I used port forwarding functionality to connect from my computer to the VirtualBox Linux, but today, I would like to use a kind of different technique to connect to the VirtualBox Linux.
As you know, Juno has been released! It was just a few days ago.
I usually wait for ‘openstack-announce’ in the OpenStack mailing list.
A few days later after that e-mail, I have finally found that DevStack branch was created on GitHub.
So after then, I have tested DevStack Juno release, and it worked very well
To test DevStack for Juno, I used VirtualBox. I mainly use VirtualBox because it is a good Open Source software to simply test something with Virtualized environment.
And I used Ubuntu 14.04, LTS version.