Tcvn2010

List of TCVN 2010

http://hsevn.com
Số hiệu Tên tài liệu
ĐLVN 01:2008 Helmets Protective test device. Temporary produre of inspection
ĐLVN 01:2008 Helmets Protective test device. Temporary produre of inspection
ĐLVN 02:1998 Unequal lever arm balances (steel yards). Methods and means of verification
ĐLVN 02:2009 Unequal lever arm balances (steel yards). Methods and means of verification
ĐLVN 03:1998 Conveyor-belt scales. Methods and means of verification
ĐLVN 03:2009 Belt weighers. Methods and means of verification
ĐLVN 1:1997 Taximeters
ĐLVN 1:2003 Taximeters. Methods and means of verification
ĐLVN 10:1998 Fuel dispensing pumps. Methods and means of verification
ĐLVN 10:2003 Fuel dispensing pumps. Methods and means of verification
ĐLVN 100:2002 Nonautomatic scales class. Testing procedures
ĐLVN 101:2002 Electronic voltmeter. Methods and means of calibration
ĐLVN 102:2002 RF power meters. Methods and means of calibration
ĐLVN 103:2002 Attenuator. Methods and means of calibration
ĐLVN 104:2002 Micrometer callipers. Methods and means of calibration
ĐLVN 105:2002 Steel straightedges. Methods and means of calibration
ĐLVN 106:2002 Glass alcoholmeters. Methods and means of calibration
ĐLVN 107:2002 Breath alcohol testers. Methods and means of verification
ĐLVN 108:2002 Force measuring instruments. Methods and means of calibration
ĐLVN 109:2002 Tensile compress testing machines. Methods and means of calibration
ĐLVN 11:1998 Barrels. Methods and means of verification
ĐLVN 110:2002 Torque wrenches. Methods and means of calibration
ĐLVN 111:2002 Alternating watt-hour meters. Testing procedures
ĐLVN 112:2002 Pressure Transducer and Transmitter. Methods and means of calibration
ĐLVN 113:2003 Requirements for content and wording of technical documents on metrology of Vietnam
ĐLVN 114:2003 Requirements on content and format of calibration flow chart
ĐLVN 115:2003 Generators. Methods and means of calibration
ĐLVN 116:2003 Osilloscopes. Methods and means of calibration
ĐLVN 117:2003 Spectrum analyzers. Methods and means of calibration
ĐLVN 118:2003 Taximeters. Testing procedures
ĐLVN 119:2003 Vernier callipers. Methods and means of calibration
ĐLVN 12:1998 Casks and barrels. Methods and means of verification
ĐLVN 120:2003 Precision levels. Methods and means of calibration
ĐLVN 121:2003 Spring dial scales. Testing procedures
ĐLVN 122:2003 Portable wheel load scales. Testing procedures
ĐLVN 123:2003 Calibration of noble metal standard thermocouple type B, R, S by comparison technique. Methods and means of calibration
ĐLVN 124:2003 Industrial radiation thermometers. Methods and means of calibration
ĐLVN 125:2003 Industrial platinum resistance thermometers. Methods and means of calibration
www.hsevn.com Page 1 of 244

List of TCVN 2010

http://hsevn.com
ĐLVN 126:2003 Current transformers. Testing procedures
ĐLVN 127:2003 Chamber for determination biochemical oxygen demand. Methods and means of calibration
ĐLVN 128:2003 Dynamic viscosimeters. Methods and means of verification
ĐLVN 129:2004 Measuring systems other than water. Technical, metrological and testing requirements
ĐLVN 13:1998 Truck weighbridges. Methods and means of verification
ĐLVN 13:2009 Weighbridges. Methods and means of verification
ĐLVN 130:2004 Vertical cylindrical tanks. Methods and means of calibration
ĐLVN 131:2004 Guide to the evaluation and expression of uncertainty in measurement
ĐLVN 132:2004 Guidelines for the determination of recalibration intervals of measuring equipments
ĐLVN 133:2004 Pressure switchs. Methods and means of calibration
ĐLVN 134:2004 Aneroid barometer. Methods and means of verification
ĐLVN 135:2004 Kew pattern barometers. Methods and means of verification
ĐLVN 136:2004 Beckmann Thermometers. Methods and means of calibration
ĐLVN 137:2004 Liquid in glass thermometers. Methods and means of calibration
ĐLVN 138:2004 Digital and analog thermometers. Methods and means of calibration
ĐLVN 139:2004 Glass capillary viscosimeters for measurement of kinematic viscosity. Methods and means of verification
ĐLVN 14:1998 Platform scales. Methods and means of verification
ĐLVN 14:2009 Platform scales. Methods and means of verification
ĐLVN 140:2004 Assman aspirated hygrometers. Methods and means of verification
ĐLVN 141:2004 Calibrators. Methods and means of calibration
ĐLVN 142:2004 Insulation resistance meters. Methods and means of verification
ĐLVN 143:2004 Earth resistance meters. Methods and means of verification
ĐLVN 144:2004 Voltage transformers for measurement. Testing procedures
ĐLVN 145:2004 Automatics instruments for weighing road vehicles in motion. Methods and means of verification
ĐLVN 146:2004 Automatic instruments for weighinh road vehicles in motion. Testing procedures
ĐLVN 147:2004 Profile projectors. Methods and means of calibration
ĐLVN 148:2004 Thread plug gauges. Methods and means of calibration
ĐLVN 149:2004 Gauge rings. Methods and means of calibration
ĐLVN 15:1998 Bench weight scales. Methods and means of verification
ĐLVN 15:2009 Bench weight scales. Methods and means of verification
ĐLVN 150:2004 Concrete strength test instruments with rebound method. Methods and means of calibration
ĐLVN 151:2004 Pendulum impact test machines. Methods and means of calibration
ĐLVN 154:2005 Guide to calibration interlaboratory comparisons
ĐLVN 155:2005 Diaphragm meters. Methods and means of verification
ĐLVN 156:2005 Liquefied petroleum gas dispensers (LPG). Methods and means of verification
ĐLVN 158:2005 Alcohol in glass thermometers with minimum device. Methods and means of verification
ĐLVN 159:2005 Mercury in glass thermometers with maximum device. Methods and means of verification
ĐLVN 16:1998 Nonautomatic weighing instruments of special and high accuracy classes. Methods and means of verification

List of TCVN 2010

http://hsevn.com
ĐLVN 16:2009 Analytical and technical balances. Methods and means of verification
ĐLVN 160:2005 Digital and analog temperature indicators. Methods and means of calibration
ĐLVN 161:2005 Industrial thermocouples. Methods and means of calibration
ĐLVN 162:2005 Deadweight force standard machines. Methods and means of calibration
ĐLVN 163:2005 Rockwell hardness calibration machines. Methods and means of calibration
ĐLVN 164:2005 Standard frequency generators. Methods and means of calibration
ĐLVN 165:2005 Tachometers. Methods and means of calibration
ĐLVN 166:2005 Watt- hour meters standard. Methods and means of calibration
ĐLVN 168:2005 1-axis measuring machines. Methods and means of calibration
ĐLVN 169:2005 Universal bevel protractors. Methods and means of calibration
ĐLVN 17:1998 Meters for cold potable water. Methods and means of verification
ĐLVN 17:2009 Cold potable water. Methods and means of verification
ĐLVN 170:2005 Automatic checkweighers. Metrological and technical requirements
ĐLVN 172:2005 Conventional pipe prover. Methods and means of calibration
ĐLVN 173:2005 Small volume prover. Methods and means of calibration
ĐLVN 174:2005 Meters used in metering liquid hydrocarbons. Methods and means of calibrarion
ĐLVN 175:2005 Meters for use in metering liquid hydrocarbons. Methods and means of verification
ĐLVN 176:2005 Master meters. Methods and means of calibration
ĐLVN 18:1998 Current transformers for measurement and protection. Methods and means of verification
ĐLVN 18:2009 Current transformers for measurement and protection. Methods and means of verification
ĐLVN 19:1998 Ohmmeters. Methods and means of verification
ĐLVN 193:2009 Master meters for oil products. Methods and means of verification
ĐLVN 194:2009 Bell prover. Methods and means of verification
ĐLVN 195:2009 Master meters for liquified petroleum gas. Methods and means of verification
ĐLVN 196:2009 PVTt Standard. Method and means of verification
ĐLVN 197:2009 Reference merury - in - glass thermometers. Method and means of verification
ĐLVN 198:2009 Standard hydrometers. Method and means of verification
ĐLVN 199:2009 Alcohol standard gas. Method and means of verification
ĐLVN 20:1998 Liquid-in-glass thermometers. Methods and means of verification
ĐLVN 20:2009 Liquid-in-glass thermometers. Methods and means of verification
ĐLVN 200:2009 Exhaust emission standard gas. Methods and means of verification
ĐLVN 201:2009 Standard current transformer. Method and means of verification
ĐLVN 202:2009 Standard voltage transformers for measurement. Methods and means of verification
ĐLVN 203:2009 Standard resistance box. Methods and means of verification
ĐLVN 204:2009 Verification equipment for electrical energy meter. Methods and means of verification
ĐLVN 205:2009 Electronicfrequency couter. Methods and means of verification
ĐLVN 206:2009 Sound calibrator. Methods and means of verification
ĐLVN 207:2009 Standard for verification of taximeters. Methods and means of verification

List of TCVN 2010

http://hsevn.com
ĐLVN 208:2009 Generators. Methods and means of verification
ĐLVN 209:2009 Spectrum analyzers. Methods and means of verification
ĐLVN 21:1998 Clinical thermometers (mercury-in-glass with maximum device). Methods and means of verification
ĐLVN 210:2009 Attenuators. Methods and means of verification
ĐLVN 211:2009 Deadweight pressure gauges. Methods and means of verification
ĐLVN 212:2009 Verification instrument for portable wheel load scales. Methods and means of verification
ĐLVN 213:2009 Infrared ear thermometers. Methods and means of verification
ĐLVN 214:2009 Instruments for measuring vehicle exhaust emissions. Methods and means of verification
ĐLVN 22:1998 Flow meters for oils and oil products. Methods and means of verification
ĐLVN 22:2009 Positive displacement meters for oils products. Methods and means of verification
ĐLVN 23:1998 Clinical digital thermometers with maximum device. Methods and means of verification
ĐLVN 24:1998 Voltage transformers for measurement and protection. Methods and means of verification
ĐLVN 24:2009 Voltage transformers for measurement. Methods and means of verification
ĐLVN 25:1998 Barges for oil products. Methods and means of verification
ĐLVN 26:1998 Portable wheel load scales. Methods and means of verification
ĐLVN 27:1998 Moisture meters for paddy rice, rice, maize and coffee. Methods and means of verification
ĐLVN 27:2009 Moisture meters for paddy rice, rice, maize and coffee. Methods and means of verification
ĐLVN 28:1998 Vertical cylindrical tanks. Methods and means of verification
ĐLVN 29:1998 Horizontal cylindrical tanks. Methods and means of calibration
ĐLVN 29-1:2004 Horizontal cylindrical tanks. Methods and means of calibration
ĐLVN 30:1998 Spring dial Scales. Methods and means of verification
ĐLVN 30:2009 Spring dial Scales. Methods and means of verification
ĐLVN 31:1998 pH-meters. Methods and means of verification
ĐLVN 31:2001 pH-meters. Methods and means of verification
ĐLVN 32:1998 Static railways scales. Methods and means of verification
ĐLVN 32:2009 Static rail scales. Methods and means of verification
ĐLVN 33:1998 In-motion rail-weighbridges. Methods and means of verification
ĐLVN 33:2009 In-motion rail-weighbridges. Methods and means of verification
ĐLVN 34:1998 Commercial rule up to 1000 mm. Methods and means of verification
ĐLVN 36:1999 Measuring tapes. Methods and means of verification
ĐLVN 36:2009 Measuring tapes. Methods and means of verification
ĐLVN 37:1999 Liquid flow meters. Methods and means of verification
ĐLVN 38:1999 Rotameters. Methods and means of verification
ĐLVN 39:1999 Alternating current static watt-hour meters. Methods and means of verifications
ĐLVN 39:2004 Alternaring current static watt-hour meters. Methods and means of verification
ĐLVN 40:1999 60-Cobalt teletherapy equipment. Methods and means of verification
ĐLVN 41:1999 X-ray diagnostic radiography and direct fluoroscopy. Methods and means of verification
ĐLVN 42:1999 Computed tomography. Methods and means of verification

List of TCVN 2010

http://hsevn.com
ĐLVN 43:1999 Electrocardiographs. Methods and means of verification
ĐLVN 43:2009 Electrocardiographs. Methods and means of verification
ĐLVN 44:1999 Electroencephalographs. Methods and means of verification
ĐLVN 44:2009 Electroencephalographs. Methods and means of verification
ĐLVN 45:1999 Gas analysers. Methods and means of verification
ĐLVN 45:2001 Gas analysers. Methods and means of verification
ĐLVN 46:1999 Atomic absorption spectometers for determination of toxic metals in water. Methods and means of verification
ĐLVN 47:1999 Weights of classes F2, M1 and M2. Methods and means of verification
ĐLVN 47:2009 Weights of classes F2, M1 and M2. Methods and means of verification
ĐLVN 48:1999 Control scales for vehicle overload. Methods and means of verification
ĐLVN 48:2009 Control scales for vehicle overload. Methods and means of verification
ĐLVN 49:1999 Tensile-compress machines. Methods and means of verification
ĐLVN 5:1998 Car tank. Methods and means of verification
ĐLVN 50:1999 Weights of classes E2, F1. Methods and means of verification
ĐLVN 50:2009 Weights of E2, F1 classes. Methods and means of verification
ĐLVN 51:1999 Electronic counter. Methords and means of calibration
ĐLVN 52:1999 Digital quartz stop watches. Methods and means of calibration
ĐLVN 53:1999 Blood pressure dead weight testers. Methods and means of verification
ĐLVN 54:1999 Elastic standard manometers for gauge pressure and vacuum. Methods and means of verification
ĐLVN 54:2009 Standards Pressure gauges type electrical and bourdon tube. Methods and means of verification
ĐLVN 55:1999 Ampemeters, Voltmeters, Wattmeters, Varmeters. Methods and means of verification
ĐLVN 56:1999 Force proving instruments. Methods and means of calibration
ĐLVN 57:1999 Metalic volumetric standard class 2. Methods and means of verification
ĐLVN 57:2009 Volumetric standard class 2. Methods and means of verification
ĐLVN 58:1999 Rail tankers. Methods and means of calibration
ĐLVN 59:2000 Volumetric standards in glass. Methods and means of verification
ĐLVN 60:2000 Standard weighing machines. Methods and means of verification
ĐLVN 61:2000 Gauge blocks. Methods and means of calibration
ĐLVN 62:2000 Hardness reference blocks. Methods and means of calibration
ĐLVN 63:2000 Hardness testing machines. Methods and means of calibration
ĐLVN 64:2000 Deadweight pressure gauges. Methods and means of calibration
ĐLVN 65:2000 X-ray image intensifier television system. Methods and means of verification
ĐLVN 66:2000 Multifunction meters. Methods and means of verification
ĐLVN 67:2000 DC measuring resistance boxes. Methods and means of verification
ĐLVN 68:2001 Laboratory volumetric glasswares. Methods and means of verification
ĐLVN 69:2001 Velocity meters. Methods and means of verification
ĐLVN 69-1:2004 Guidelines for verifying of velocity meters
ĐLVN 7:1998 Alternating-current watthour meters. Methods and means of verification

List of TCVN 2010

http://hsevn.com
ĐLVN 7:2003 Alternating-current watthour meters. Methods and means of verification
ĐLVN 70:2001 Hydrometer. Methods and means of verification
ĐLVN 71:2001 Fixed-point calibration procedure for standard platinum resistance thermometer
ĐLVN 72:2001 Tungsten strip lamp. Methods and means of calibration
ĐLVN 73:2001 Digital multimeters (DMM). Methods and means of calibration
ĐLVN 74:2001 Watt-hour meters standard. Methods and means of verification
ĐLVN 74:2009 Watt-hour meters standard. Methods and means of verification
ĐLVN 75:2001 Dial indicators. Methods and means of calibration
ĐLVN 76:2001 Pressure and vacuum gauge with digital and dial indicating type. Methods and means of calibration
ĐLVN 77:2001 Lever type force standards machine. Methods and means of calibration
ĐLVN 8:1998 Elastic pressure and vacuun gauge. Methods and means of verification
ĐLVN 80:2002 Total dissolved solids meters. Methods and means of verification
ĐLVN 87:2001 Hygrometers. Methods and means of verification
ĐLVN 87:2005 Hygrometers. Methods and means of verification
ĐLVN 88:2001 Measuring instruments for temperature of air. Methods and means of verification
ĐLVN 88:2005 Air thermosensor thermometers. Methods and means of verification
ĐLVN 89:2001 Sound level meter. Methods and means of verification
ĐLVN 9:1998 Sphygmomanometers. Methods and means of verification
ĐLVN 90:2001 Dust measuring instruments. Methods and means of verification
ĐLVN 91:2001 UV/Vis spectrometers. Methods and means of verification
ĐLVN 92:2001 Wind velocity measuring instruments. Methods and means of verification
ĐLVN 93:2001 Flow velocity measuring instruments. Methods and means of verification
ĐLVN 94:2002 Flow meters for oils and oils products. Methods and means of calibration
ĐLVN 95:2002 Turbin Flowmeters. Methods and means of verification
ĐLVN 96:2002 Meters for cold potable water. Testing procedures
ĐLVN 97:2002 Fuel dispensers. Testing procedures
ĐLVN 98:2002 Weights of classes E1, E2. Methods and means of calibration
ĐLVN 99:2002 Weights of classes F1, F2 and M1. Methods and means of calibration
QCVN :2008/BTNMT National technical regulation on demarcation and creating legal documents for administrative boundaries of all levels
QCVN 01:2007/BKHCN National technical regulation on gasoline and diesel fuel
QCVN 01:2008/BCT National technical regulation on Electric safety
National technical regulation on the classification and construction of inland waterway steel ships carrying dangerous
QCVN 01:2008/BGTVT
chemicals in bulk
QCVN 01:2008/BLĐTBXH National technical regulation on safe work of Steam boiler and pressure vessel
QCVN 01:2008/BTC National technical regulation on national reserve of bulked paddy in low pressure condition
QCVN 01:2008/BTNMT National technical regulation on the effluent of natural rubber processing industry
QCVN 01:2008/BTTTT National technical regulation on public postal services
QCVN 01:2008/BXD Vietnam Building Code. Regional and Urban Planning and Rural Residental Planning

List of TCVN 2010

http://hsevn.com
QCVN 01:2009/BYT National technical regulation on drinking water quality
QCVN 02:2008/BCT National technical regulation on safety in the storage, transportation, use and disposal of industrial explosive materials
QCVN 02:2008/BKHCN National technical regulation on protective helmets for motorcycle and moped users
QCVN 02:2008/BTC National technical regulation on national reserve of generator
QCVN 02:2008/BTNMT National technical regulation on the emission of health care solid waste incinerators
QCVN 02:2009/BYT National technical regulation on domestic water quality
QCVN 03:2008/BTC National technical regulation on national reserve of light type relief tents
QCVN 03:2008/BTNMT National technical regulation on the allowable limits of heavy metals in the soils
QCVN 03:2009/BKHCN National technical regulation on safety of toys
QCVN 04:2008/BTC National technical regulation on state reserve of raft-type life-saving apparatus
QCVN 04:2009/BCT National technical regulation on safety in the exploitation of open-cast mines
QCVN 04:2009/BTNMT National technical regulation on establisment of Horizotal control network
QCVN 05:2008/BTC National technical regulation on state reserve of ring life buoy
QCVN 06:2008/BTC National technical regulation on state reserve of sealed preservation rice
QCVN 08:2008/BTNMT National technical regulation on the surface water quality
QCVN 09:2008/BTNMT National technical regulation on the underground water quality
QCVN 10:2008/BTNMT National technical regulation on coastal water quality
QCVN 11:2008/BTNMT National technical regulation on establisment of leveling network
QCVN 12:2008/BTNMT National technical regulation on the effluent of pulp and paper mills
QCVN 13:2008/BTNMT National technical regulation on the effluent of textile industry
QCVN 14:2008/BTNMT National technical regulation on domestic wasteswater
QCVN 15:2008/BTNMT National technical regulation on the pesticide residues in the soils
QPVN 16-79 Code on protection against wood worms and white ants for buildings
QPVN 25-83 Technical code of forestry highway design
TCVN 1:1995 Form for presentation of Vietnam Standards
TCVN 100-63 Small square head fit finished bolts. Dimensions
TCVN 101-63 Bolts for common purpose. Specifications
TCVN 1022:1992 Biological preparations. General requirements for the sterility
TCVN 1023:1991 Medicines and medical devices. Sterlization tests
TCVN 1034:2008 Machine tools. Lathe centres. Sizes for interchangeability
TCVN 1034-86 Lathe centres and half-centres. Structure and dimensions
TCVN 103-63 Hexagon large rough nuts. Dimensions
TCVN 1036-71 Radinses of curve angles and bevel edges
TCVN 1039-71 Claw flat thrust rings. Dimensions
TCVN 1040-71 Thrust rings. Specifications and test methods
TCVN 1043-71 Thick flat keys
TCVN 1044:2007 Laboratory glassware. Volumetric glassware. Methods for use and testing of capacity
TCVN 1044-71 Glass. Determination of volumeric mass

List of TCVN 2010

http://hsevn.com
TCVN 1045-88 Glass. Determination of heat resistance
TCVN 1046:2004 Glass. Hydrolytic resistance of glass grains at 98oC. Method of test and classification
TCVN 104-63 Slotted hexagon rough nuts. Dimensions
TCVN 1046-88 Glass. Hydrolytic resistance of glass grains at 98oC. Test methods and classification
TCVN 1047:2004 Glass. Resistance to attack y a boiling aqueous solution of mixed alkali. Method of test and classification
TCVN 1047-88 Glass. Determination of resistance to attack by a boiling aqueous solution of mixed alkali and classification
Glass. Resistance to attack by hydrochloric acid at 100 degrees C. Flame emission or flame atomic absorption spectrometric
TCVN 1048:2007
method
TCVN 1048-88 Glass. Determination of resistance to attack by aqueous acidic solutions and classification
TCVN 1049-71 Glass. Chemical resistance. Classification
TCVN 1050:1971 Testing glasswares. Grinding cones of tapping angle 1:10. Dimension of the grinding part
TCVN 1051-71 Ethanol purified. Test methods
TCVN 1052-71 Ethanol purified. Specifications
TCVN 1053-86 Tea leaves. Determination of fiber
TCVN 1054-86 Tea leaves. Determination of water quantity on surface of tea leaves
TCVN 1055:1986 Reagents. Mehtods for the preparation of supplementary of reagents and solutions used in analysis
TCVN 1056:1986 Reagents. Preparation of solutions for colorimetric and nephelometric analysis
TCVN 105-63 Large slotted hexagon rough nuts. Dimensions
TCVN 1058:1978 Chemical products. Classification and designation of purity degrees
TCVN 1059:1971 Single beds and double beds. Basic dimensions
TCVN 1060:1971 Desks. Basic dimensions
TCVN 1061-71 Chairs. Basic dimensions
TCVN 1062-71 Wardrobes. Basic dimensions
TCVN 106-63 Square rough nuts. Dimensions
TCVN 1066-71 Gearing. Straight bevel gears. Basic profiles
TCVN 1067-84 Cylindrical gears drive. Accuracy
TCVN 1068-71 Oxygen technical
TCVN 1069-71 Glass packages bottles for alcohol "Lua moi". Basic form and dimensions
TCVN 1070-71 Glass package. Bottles for alcohol. Determination of water resistance
TCVN 1071-71 Glass packages. Bottles for alcohol. Technical requirements
TCVN 1072-71 Wood. Classification after mechanical and physical characteristics
TCVN 1073:1971 Round timbers. Basic dimensions
TCVN 1074:1986 Round timber. Specifications based on its defects
TCVN 1075-71 Planks. Basic dimensions
TCVN 1076:1986 Sawn wood. Terms and definitions
TCVN 107-63 Large square rough nuts. Dimensions
TCVN 1077:1986 Mining posts
TCVN 1078:1999 Calcium magnesium phosphate fertilizer

List of TCVN 2010

http://hsevn.com
TCVN 1078-85 Calcium magnesium phosphorus fertilizer
TCVN 1079-71 Bread. Storage and transportation
TCVN 1084:1986 Pneumatic power forging hammers. Basic dimensions and parameters
TCVN 1085:1986 Screw presses. Basic parameters and dimensions
TCVN 1086:1986 Single acting open side single crank presses. Basic parameters and dimensions
TCVN 1087:1990 Combined shearing presses. Types, basic parameters and dimensions
TCVN 109-63 Large hexagon semifinished nuts. Dimensions
TCVN 1-1:2003 Development of standards. Part 1: Procedures for developing Vietnam Standards
TCVN 1-1:2008 Development of standards. Part 1: Procedures for developing national standards by Technical committees
TCVN 112-63 Large slotted hexagon semifinished nuts. Dimensions
TCVN 11-78 System for design documentation. Projection of measuring axes
TCVN 1-2:2003 Development of standards. Part 2: Rules for the structure and the presentation of Vietnam Standards
TCVN 1-2:2008 Development of standards. Part 2: Rules for the structure and drafting of National Standards
TCVN 124-63 Nuts. Specifications
Tractors and machinery for agriculture and forestry. Classification and terminology. Part 0: Classification system and
TCVN 1266-0:2001
classification
TCVN 126-63 Fly nuts. Dimensions
TCVN 1266-72 Agricultural machinery. Principles for designations and symbols
TCVN 1269-1986 Mats. Basic dimensions
TCVN 1270:2000 Paper and board. Determination of grammage
TCVN 1270:2008 Paper and board. Determination of grammage
TCVN 1270-72 Paper and board. Determination of mass per square metre
TCVN 1271:1999 Coals. Lists of quality characteristies
TCVN 1271-86 Coal. Systems of quality characteristics
TCVN 1272:1986 Reagents and special pure chemicals. Complexometric method for determination of basic matters content
TCVN 1273-86 Liquors. Test methods
TCVN 1274-72 Lemon liquor. Specification
TCVN 1275-72 Coffee liquor. Specification
TCVN 1279:1993 Green coffee. Packaging, marking, transportation and storage
TCVN 1280-81 Breed pigs. Method of verification
TCVN 1281-81 Breed fat boars. Quality gradation
TCVN 1282-81 Breed fat sows. Quality gradation
TCVN 1283-86 Round timber. Cubing table
TCVN 1284-86 Sawn wood. Cubing table
TCVN 1285:1985 Grinding wheel exit grooves. Shapes and dimensions
TCVN 1292-72 Pipeline fittings. Malleable cast iron connectors with taper thread used for pipelines. Dimensions and general structures
TCVN 1293-72 Pipeline fittings. Malleable cast iron connectors with taper thread used for pipelines. Elbows. Types
TCVN 1295-72 Pipeline fittings. Malleable cast iron connectors with taper thread used for pipelines. Female elbows with union nuts. Types

List of TCVN 2010

http://hsevn.com
Pipeline fittings. Malleable cast iron connectors with taper thread used for pipelines. External thread elbows with union nuts.
TCVN 1296-72
Types
TCVN 1297-72 Pipeline fittings. Malleable cast iron connectors with taper thread used for pipelines. Tees. Types
TCVN 1298-72 Pipeline fittings. Malleable cast iron connectors with taper thread used for pipelines. End stepped tees. Types
TCVN 1299-72 Pipeline fittings. Malleable cast iron connectors with taper thread used for pipelines. End double stepped tees. Types
TCVN 13:2008 Technical drawings. Conventional representation of gears
TCVN 1300-72 Pipeline fittings. Malleable cast iron connectors with taper thread used for pipelines. Curve tees. Types
TCVN 1301-72 Pipeline fittings. Malleable cast iron connectors with taper thread used for pipelines. End stepped curved tees. Types
TCVN 130-1977 Spring washers. Dimension and specifications
TCVN 1302-72 Pipeline fittings. Malleable cast iron connectors with taper thread used for pipelines. End double stepped curved tees. Types
TCVN 1303-72 Pipeline fittings. Malleable cast iron connectors with taper thread used for pipelines. Curved double-tube tees. Types
TCVN 1304-72 Pipeline fittings. Malleable cast iron connectors with taper thread used for pipelines. Double swept space tees. Types
Pipeline fittings. Malleable cast iron connectors with taper thread used for pipelines. End stepped double swept space tees.
TCVN 1305-72
Types
TCVN 1306-72 Pipeline fittings. Malleable cast iron connectors with taper thread used for pipelines. Crosses. Types
TCVN 1307-72 Pipeline fittings. Malleable cast iron connectors with taper thread used for pipelines. End stepped crosses. Types
TCVN 1308-72 Pipeline fittings. Malleable cast iron connectors with taper thread used for pipelines. End double stepped crosses. Types
TCVN 1309-72 Pipeline fittings. Malleable cast iron connectors with taper thread used for pipelines. Swept crosses. Types
TCVN 1310-72 Pipeline fittings. Malleable cast iron connectors with taper thread used for pipelines. End stepped swept crosses. Types
TCVN 1311-72 Pipeline fittings. Malleable cast iron connectors with taper thread used for pipelines. End double stepped swept crosses.Types
TCVN 1312-72 Pipeline fittings. Malleable cast iron connectors with taper thread used for pipelines. Space crosses. Types
TCVN 1313-72 Pipeline fittings. Malleable cast iron connectors with taper thread used for pipelines. End stepped space crosses. Types
TCVN 1314-72 Pipeline fittings. Malleable cast iron connectors with taper thread used for pipelines. Sockets. Types
TCVN 1315-72 Pipeline fittings. Malleable cast iron connectors with taper thread used for pipelines. End stepped connectors. Types
TCVN 1316-72 Pipeline fittings. Malleable cast iron connectors with taper thread used for pipelines. Internal thread union nuts. Types
TCVN 1317-72 Pipeline fittings. Malleable cast iron connectors with taper thread used for pipelines. External thread union nuts. Types
TCVN 1318-72 Pipeline fittings. Malleable cast iron connectors with taper thread used for pipelines. Blank plugs. Types
TCVN 1319-72 Pipeline fittings. Malleable cast iron connectors with taper thread used for pipelines. Covers. Types
TCVN 1320-72 Pipeline fittings. Malleable cast iron connectors with taper thread used for pipelines. Plugs. Types
TCVN 1321-72 Pipeline fittings. Malleable cast iron connectors with taper thread used for pipelines. Shouldered female fittings
TCVN 132-1977 Large washers. Dimensions
TCVN 1322-72 Pipeline fittings. Malleable cast iron connectors with taper thread used for pipelines. Internal thread fittings. Types
TCVN 1323-72 Pipeline fittings. Malleable cast iron connectors with taper thread used for pipelines. Shouldered external thread fittings. Types
Pipeline fittings. Malleable cast iron connectors with taper thread used for pipelines. External thread elbows for fitting union
TCVN 1324-72
nuts. Types
TCVN 1325-72 Pipeline fittings. Malleable cast iron connectors with taper thread used for pipelines. Union nuts. Types

List of TCVN 2010

http://hsevn.com
TCVN 1326-72 Pipeline fittings. Malleable cast iron connectors with taper thread used for pipelines. Specifications
TCVN 134-1977 Washers. Specifications
TCVN 135-63 Tapers. Tapers for general use
TCVN 136:2007 Machine tools. Self-holding tapers for tool shanks
TCVN 136-70 Tapers of instruments. Dimensions
TCVN 137-70 Tapers of instruments. Tolerances
TCVN 13-78 Technical drawings. Conventional and simplified presentation of gearing
TCVN 1378:1985 Pipeline valves. Brass lift check valves with female screwed ends for Pa=1,6 MPa
TCVN 1385:1985 Pipeline fittings. Steel rotary disk retaining valves, flanged joints, specified pressure less than 16MPa. Specifications
TCVN 138-64 Sulfuric acid for accumulators
Pipeline fittings. Steel obturator rings for rotary disk retaining steel valves with specified pressures 640; 1000; 1600 N/cm2.
TCVN 1392-72
Structure and dimensions
TCVN 1394:1985 Pipeline fittings. Covered valves. Basic parameters
TCVN 139-91 Standard sand for cement testing
Pipeline fittings. Malleable cast iron covered flanged valves with chain sprocket, for specified pressure 250 N/cm2. Structure
TCVN 1399-72
and dimensions
TCVN 1401:1985 Pipeline fittings. Malleable cast iron flanged stop valves, flanged joints threaded, for transporating ammoniac Pa=2,5MPa
TCVN 140-64 Cement. Physico-mechanical tests
TCVN 141:1998 Cement. Methods of chemical analysis
TCVN 141:2008 Portland cement. Methods of chemical analysis
TCVN 14-1:2008 Technical product documentation. Springs. Part 1: Simplified representation
TCVN 141-86 Cement. Methods of chemical analysis
TCVN 1419-72 Pipeline fittings. Rolled steel flanged stop valves, specified pressures up to 1000 N/cm2. Basic dimensions
TCVN 14-2:2008 Technical product documentation. Springs. Part 2: Presentation of data for cylindrical helical compression springs
TCVN 142-88 Preferred numbers and series of preferred numbers
TCVN 1437-89 Agricultural machinery. Fluid pesticide mist and dust sprayers. Test methods
TCVN 143-86 Twist drills. Series of diameters and tolerances on diameters
TCVN 1438-73 Fluid pesticide sprayers. Nozzle covers, nozzle cores
TCVN 1439-73 Tables and benches for school pupils. Sizes and basic dimensions
TCVN 1440-1986 Canned fruits. Plum in syrup
TCVN 1441-86 Ducks for slaughter
TCVN 1442-1986 Fresh duck eggs
TCVN 1443-82 Climatic conditions for use of electrotechnical and radioelectronic equipments and devices
TCVN 1444:1994 Ceiling fans
TCVN 1446-73 Sodium silicofluoride. Specifications and test methods
TCVN 1449:1995 Correspondence envelopes
TCVN 1450:1998 Hollow clay bricks
TCVN 1450-86 Hollow clay bricks

List of TCVN 2010

http://hsevn.com
TCVN 1451:1998 Solid clay bricks
TCVN 1451-86 Hard burnt clay bricks
TCVN 1452:1995 Clay tiles. Technical requirements
TCVN 1452:2004 Clay roofing tiles. Specifications
TCVN 1453-1986 Cement sandy tiles
TCVN 1454:1993 Black tea. Specifications
TCVN 1454:2007 Black tea. Definition and basic requirements
TCVN 1455:1993 Green tea. Specifications
TCVN 145-64 Taper keys. Dimensions
TCVN 1457-83 Black and green tea. Packaging, marking, transportation and storage
TCVN 1458-86 Dried tippy tea. Test methods
TCVN 1459:1996 Natri L-glutamate
TCVN 1459:2008 Food additive. Monosodium L-glutamate
TCVN 1459-74 80%monosodium glutamate. Specification
TCVN 1460:1997 Natri L-glutamate. Test methods
TCVN 1460-74 80% monosodium glutamate. Test methods
TCVN 1461-74 80% Monosodium glutamate. Packaging, marking, transportation and storage
TCVN 1462-1986 Timber sleepers
TCVN 1463-74 Timber. Method of diffusion soak
TCVN 1464-86 Sawn wood. Methods for preserving from surface rot
TCVN 1465-74 Bread. Test methods
TCVN 146-64 Taper keys with gib head. Dimensions
TCVN 1468-85 Punches
TCVN 1469-85 Small files
TCVN 1470-85 Center punches
TCVN 1471-85 Steel bench hammers
TCVN 1472:1993 Files
TCVN 1473-85 Cape chisels. Specifications
TCVN 1474:1993 Hand vices
TCVN 1475-85 Flat cold chisels
TCVN 1476-85 Hand shears for cutting metal
TCVN 1477-85 Universal pincers
TCVN 1478-85 Screw drivers. Specifications
TCVN 1479-85 Rolling bearings. Types and structure
TCVN 1481:2009 Rolling bearings. Ball bearings and rolles bearings. Basic demension
TCVN 1481-85 Rolling bearings. Ball bearings and roll bearings. Basic dimensions
TCVN 1482-1985 Rolling bearings. Fit assembly
TCVN 1483:2008 Rolling bearings. Chamfer dimensions. Maximum values

List of TCVN 2010

http://hsevn.com
TCVN 1483-85 Rolling bearings. Chamfers. Dimensions
TCVN 1484:2009 Rolling bearings. Technical requirements
TCVN 1484-85 Rolling brearings. Specifications
TCVN 1485-88 Rolling bearings with adapter sleeves. Types and boundary dimensions
TCVN 1488:2008 Rolling bearings. Balls. Dimensions and tolerances
TCVN 1488-85 Rolling bearings. Balls
TCVN 1489-85 Rolling bearings. Single-row ball bearings
TCVN 1492-85 Rolling bearings. Ball bearings with extended inner rings
TCVN 1493-85 Rolling bearings. Single-row ball bearings with flange on outer ring
TCVN 1494-85 Rolling bearings. Grooves for locking spring rings.Locking spring rings. Dimensions
TCVN 1495-85 Rolling bearings. Double-row radial ball bearings
TCVN 1496-85 Rolling bearings. Single-row thrust ball bearings
TCVN 1497-85 Rolling bearings. Single-row thrust ball bearings with split inner rings
TCVN 1498-85 Rolling bearings. Double-row thrust ball bearings
TCVN 1499-85 Rolling bearings. Duplex thrust ball bearings
TCVN 15:2008 Kinematic diagrams. Graphical symbols
TCVN 1500-85 Rolling bearings. Single thrust ball bearings
TCVN 1501-85 Rolling bearing. Double-row thrust bearings
TCVN 1502-85 Rolling bearings. Radial short cylindrical roller bearings
TCVN 1503-85 Rolling bearings. Double-row radial short cylindrical roller bearings
TCVN 1504-85 Rolling bearings. Radial short cylindrical roller bearings without inner or outer rings
TCVN 1505:2009 Rolling bearings. Meadle rollera
TCVN 1505-85 Rolling bearings. Needle roller bearings
TCVN 1506:2009 Rolling bearings. Single row radial neadle roller bearings
TCVN 1506-85 Rolling bearings. Single-row radial needle roller bearings
TCVN 1507-85 Rolling bearings. Needle roller bearings with outer rings
TCVN 1509-85 Rolling bearings. Single-row tapered roller bearings
TCVN 1510-85 Rolling bearings. Double-row tapered roller bearings
TCVN 1511-85 Rolling bearings. Four-row tapered roller bearings
TCVN 1512-85 Rolling bearings. Single-row tapered roller bearings with large conical angles
TCVN 1513-85 Rolling bearings. Single-row tapered roller bearings with external radial flange on outer ring
TCVN 1514-85 Rolling bearings. Thrust tapered roller bearings
TCVN 1515-85 Rolling bearings. Double-row spherical radical roller bearings
TCVN 1516-85 Rolling bearings. Single-row thrust radial spherical roller bearings
TCVN 1517-88 Rules for writing and rounding of numbers
TCVN 1518-74 Petrol engines of small series. Basic dimensions
TCVN 1521-86 Canned fruits. Bananas in syrup. Specifications
TCVN 1525:2001 Animal feeding stuffs. Determination of Phosphorus content. Spectrometric method

List of TCVN 2010

http://hsevn.com
TCVN 1525-86 Animal feeding stuffs. Determination of phosphorus content
TCVN 1526-1:2007 Animal feeding stuffs. Determination of calcium content. Part 1: Titrimetric method
TCVN 1526-86 Animal feeding stuffs. Determination of calcium content
TCVN 1532:1993 Animal feeding stuffs. Sensory test method
TCVN 1535:1993 Animal mixed feeding stuffs. Determination of fineness
Animal feeding stuffs. Determination of the contents of calcium, copper, iron, magnesium, manganese, potassium, sodium and
TCVN 1537:2007
zinc. Method using atomic absorption spectrometry
TCVN 1537-74 Animal mixed feeding stuffs. Determination of iron impurities content
TCVN 1539-74 Animal mixed feeding stuffs. Determination of spore content
TCVN 1540-86 Animal feeding stuffs. Determination of insects infection
TCVN 1545:1993 Animal feeding stuffs. Determination of nitrogen-free extract content
TCVN 1546:1974 Animal mixed feeding stuffs. Determination of acid content
TCVN 1547:1994 Compound feeding stuffs for pigs
TCVN 1547:2007 Animal feeding stuffs. Compound feeds for pigs
TCVN 1548:1987 Non-destructive testing for welded joints. Ultrasonic methods
TCVN 1549:1994 Canned fruits. Pineapple juice
TCVN 1550:1989 Vacuum flasks. Specifications and methods of test
TCVN 1551:1993 Electric filament lamps for general illumination purposes. Specifications
TCVN 1552-86 Agricultural machinery. Disk harrow. Specifications
TCVN 1553-74 Wood. Determination of adhesion force of nails and screws
TCVN 1554-1974 Wood. Determination of water penetration
TCVN 1555-74 Internal combustion engines. Rotary directions and methods for numbering cylinders
TCVN 1556:1997 Technical hydrochloric acid
TCVN 1556-86 Hydrochloric acid technical
TCVN 1557:1991 Soaps. Test methods
TCVN 1558-1985 Caps for rolling bearing blocks. Low blind end caps for diameters from 47 till 100 mm. Basic dimensions
TCVN 155-86 Cylindrical pins with internal theads
TCVN 1559-1985 Caps for rolling bearing blocks. Low blind end caps for diameters from 110 till 400 mm. Basic dimensions
TCVN 1560-1985 Caps for rolling bearing blocks. High blind end caps for diameters from 47 till 110 mm. Basic dimensions
TCVN 1561-1985 Caps for rolling bearing blocks. High blind end caps for diameters from 110 till 400 mm. Basic dimensions
TCVN 1562-1985 Caps for rolling bearing blocks. Low pierced caps with cup seal for diameters from 47 till 100 mm. Basic dimensions
TCVN 1563-1985 Caps for rolling bearing blocks. Low pierced caps with cup seal for diameters from 110 till 400 mm. Basic dimensions
TCVN 1564-1985 Caps for rolling bearing blocks. Medium end caps with cup seal for diameters from 47 till 100 mm. Basic dimensions
TCVN 1567-1985 Caps for rolling bearing blocks. High end caps with cup seal for diameters from 110 till 400 mm. Basic dimensions
TCVN 1568-1985 Caps for rolling bearing blocks. Low end caps with fat grooves for diameters from 47 till 100 mm. Basic dimensions
TCVN 1569-1985 Caps for rolling bearing blocks. Low end caps with fat grooves diameters from 110 till 400 mm. Basic dimensions

List of TCVN 2010

http://hsevn.com
TCVN 1570-1985 Caps for rolling bearing blocks. Medium end caps with fat grooves for diameters from 47 till 100 mm. Basic dimensions
TCVN 1571-1985 Caps for rolling bearing blocks. Medium end caps with fat grooves for diameters from 110 till 400 mm. Basic dimensions
TCVN 1572-1985 Caps for rolling bearing blocks. High end caps with fat grooves for diameters from 47 till 100 mm. Basic dimensions
TCVN 1573-1985 Caps for rolling bearing blocks. High end caps with fat grooves for diameters from 110 till 400 mm. Basic dimensions
TCVN 1575-74 Canned meat. Stewed chicken
TCVN 1576-74 Canned meat. Stewed duck
TCVN 1577:1994 Canned fruits. Canned litchi
TCVN 1577:2007 Canned lychee
TCVN 1578:1994 Canned fruits. Canned mandarin oranges
TCVN 1578:2007 Canned mandarin oranges
TCVN 1579-86 Tooth brushes
TCVN 1580:1993 School copybooks
TCVN 1581:1993 Chalks
TCVN 1582-85 Hoisting chains for rotary cement kilns
TCVN 1583-85 High-tensile steel chains for mining machinery
TCVN 1584-85 Block load chains
TCVN 15-85 System for design documentation. Designations used in kinetic schemes
TCVN 1585-85 Detachable hauling chains
TCVN 1586-85 Pulling fork chains
TCVN 1587-85 Chain transmission. Load and hauling chains with normal strength
TCVN 1588-85 Block hauling chains
TCVN 1589-85 Chain transmission. Silent chains
TCVN 1590:1985 Chain transmission. Roller and bush chains
TCVN 1591:1993 Bicycle tyres and tubes
TCVN 1591-1:2006 Inner tubes and tyres for bicycles. Part 1: Inner tubes
TCVN 1591-2:2006 Inner tubes and tyres for bicysles. Part 2: Tyres
TCVN 1592:2007 Rubber. General procedures for preparing and conditioning test pieces for physical test methods
TCVN 1592-87 Rubber. General requirements for physicomechanical tests
TCVN 1594-1987 Rubber. Determination of abrasion (acron method)
TCVN 1595-1:2007 Rubber, vulcanized or thermoplastic. Determination of indentation hardness. Part 1: Durometer method (Shore hardness)
TCVN 1595-88 Rubber. Determination of Shore A hardness
TCVN 1596:2006 Rubber, vulcanized or thermoplastic. Determination of adhesion to textile fabrics
TCVN 1596-88 Rubber. Determination of adhesion strength
TCVN 1597-1:2006 Rubber, vulcanized or thermoplastic. Determination of tear strength. Part 1: Trouser, angle and crescent test pieces
TCVN 1597-2:2006 Rubber, vulcanized or thermoplastic. Determination of tear strength. Part 2: Small (Delft) test pieces
TCVN 1597-87 Rubber. Determination of tear strength
TCVN 159-86 Single-head wrenches. Structure and dimensions
TCVN 1598-74 Mouth closers against dusts

List of TCVN 2010

http://hsevn.com
TCVN 1599-74 Protective clothes used for metallurgy workers
TCVN 1602-75 Peanut kernels. Packaging and storage for protection against mouldiness
TCVN 1604-75 Carbon papers
TCVN 1605-88 Laboratory volumetric glassware. Measuring flasks
TCVN 1606-88 Laboratory volumetric glassware. Measuring pipettes
TCVN 1607-88 Laboratory volumetric glassware. Graduated pipettes
TCVN 160-86 Double-head wrenches. Dimensions of mouth
TCVN 1609-88 Laboratory volumetric glassware. Measuring burettes
TCVN 16-1:2008 Technical drawings. Simplified representation of the assembly of parts with fasteners. Part 1: General principles
TCVN 1610-88 Laboratory volumetric glassware. Graduated cylinders
TCVN 1611-75 Basic environment testing procedures. Effect of climatic factors. Constant conditions of heat and humidity. Test methods
TCVN 1612-75 Basic environment testing procedures. Effect of climatic factors. Periodically changing heat and humidity. Test methods
TCVN 1613-75 Graphical symbols to be used electric schemes. General symbols
TCVN 1614-87 Graphical symbols to be used electrical schemes. Induction bobins, throttles, transformers and magnetical amplifiers
TCVN 1615-75 Graphical symbols to be used electrical diagrams. Switching equipments
TCVN 1616-87 Graphical symbols to be used electrical diagrams. Resistors and capacitors
TCVN 1617-87 Graphical symbols in electrical diagrams. Electrical measuring devices
TCVN 161-86 Double-head wrenches with open mouth. Structure and dimensions
TCVN 1618-75 Graphical symbols to be used electrical diagrams. Communication lines, conductors, cables
TCVN 1619-87 Graphical symbols to be used electrical diagrams. Rotary electric machines
TCVN 16-2:2008 Technical drawings. Simplified representation of the assembly of parts with fasteners. Part 2: Rivets for aerospace equipment
TCVN 1620-75 Graphical symbols to be used electrical schemes. Electric plants and electric stations in networks
TCVN 1621-75 Graphical symbols to be used electrical diagrams. Electric sources
TCVN 1622-87 Graphical symbols to be used electrical diagrams. Light sources
TCVN 1623-87 Graphical symbols to be used electrical diagrams. Dischargers and safety fuses
TCVN 1624-75 Graphical symbols to be used electrical diagrams. Electric magnets
TCVN 1625-87 Graphical symbols in electrical diagrams. Electronic tubes and valves
TCVN 1626-87 Graphical symbols to be used electrical diagrams. Semiconductor devices
TCVN 1627-87 Graphical symbols to be used electrical schemes. Electrical acoustic devices
TCVN 162-86 Short single-head wrenches with open mouth. Structure and dimensions
TCVN 1628-87 Graphical symbols to be used electrical diagrams. Antenna
TCVN 1629-75 Graphical symbols to be used in electrical diagrams. Control exchanges and telephone stations
TCVN 163:1993 Adjustable wrenches
TCVN 163:2007 Assembly tools for screws and nuts. Adjustable wrenches
TCVN 1630-75 Graphical symbols to be used in electrical diagrams. Telegraphs and telegraphic transition
TCVN 1631-75 Graphical symbols to be used electrical diagrams. Driving and controlling elements for common purposes
TCVN 1632-75 Graphical symbols to be used electrical diagrams. Hysteresis creating lines
TCVN 1633-75 Graphical symbols to be used electrical diagrams. Elements and equipments of digital computer technology

List of TCVN 2010

http://hsevn.com
TCVN 1634-75 Graphical symbols to be used electrical diagrams.Blocks emitting waves and quantum amplifier
TCVN 1635-87 Graphical symbols to be used electrical diagrams. Lines of microwave technology and their elements
TCVN 1636-87 Graphical symbols to be used electrical diagrams. Telemechanic devices
TCVN 1637-75 Graphical symbols on electrical diagrams. Communication equipments
TCVN 1638-75 Graphical symbols on electrical diagrams. Ionizing radiation detectors
TCVN 1639-75 Graphical symbols to be used electric schemes. Sizes and symbols of figures
TCVN 1640-86 Agricultural machinery. Ploughshares
TCVN 1643:1992 Rice. Test methods
TCVN 1643:2008 White rice. Test methods
TCVN 1644:2001 Animal feeding stuffs. Fish meal. Specifications.
TCVN 1644-86 Animal feeding stuffs. Flat fish mess
TCVN 1646-75 Furniture for kindergartens. Sizes and basic dimensions
TCVN 1647-75 Orange liquor. Specification
TCVN 1648-75 Peanut seeds. Quality gradarion and specification
TCVN 1649-75 Breed cows and buffaloes. Method of verification
TCVN 1650-85 Hot-rolled round steels. Sizes, parameters and dimensions
TCVN 1651-1:2008 Steel for the reinforcement of concrete. Part 1: Plain bars
TCVN 1651-2:2008 Steel for the reinforcement of concrete. Part 2: Ribbed bars
TCVN 1651-3:2008 Steel for the reinforcement of concrete. Part 3: Welded fabric
TCVN 1651-85 Hot-rolled steel for reinforcement of concrete
TCVN 1652-75 Hot-rolled steels. Norrow-gauge railway rails. Sizes, parameters and dimensions
TCVN 1653-89 Narrow-guage rails. Specifications
TCVN 1654-75 Hot-rolled steels. Conic sections. Sizes, parameters and dimensions
TCVN 1655-75 Hot-rolled steels. H steel sections. Sizes, parameters and dimensions
TCVN 1656:1993 Hot-rolled steel section. Equal-leg angles. Dimensions
TCVN 1657:1993 Hot-rolled steel section/Unequal-leg angles. Dimensions
TCVN 1658-1987 Metals and alloys. Vocabulary
TCVN 1660-87 Metals and heat treatment. Terms and definitions
TCVN 1661-75 Mould testing for electrotechnical and electronic articles
TCVN 1663-75 Writting papers No3. Technical requirements
TCVN 1664:2007 Iron ores. Preparation of predried test samples for chemical analysis
TCVN 1664-86 Iron ores. Sample preparation for chemical analysis
TCVN 1665-86 Iron ores. Determination of mass loss after ignition
TCVN 1666:2007 Iron ores. Determination of moisture content of a lot
TCVN 166-64 Tin cans used for canned foods
TCVN 1666-86 Iron ores. Determination of moisture content
TCVN 1667-86 Iron ores. Determination of moisture content in delivery
TCVN 1668:2007 Iron ores. Determination of combined water content. Karl Fischer titrimetric method

List of TCVN 2010

http://hsevn.com
TCVN 1668-86 Iron ores. Determination of tied water content
TCVN 1669-86 Iron ores. Determination of titanium dioxide content
TCVN 1670-86 Iron ores. Determination of metallic iron content
TCVN 1673:2007 Iron ores. Determination of chromium content. Flame atomic absorption spectrometric method
TCVN 1673-86 Iron ores. Determination of chrome content
TCVN 1674-1:2009 Iron ores. Determination of vanadium. Part 1: BPHA spectrophotometric method
TCVN 1674-86 Iron ores. Determination of vanadium oxide content
TCVN 1675:2007 Iron ores. Determination of arsenic content. Molybdenum blue spectrophotometric method
TCVN 1675-86 Iron ores. Determination of arsenic content
TCVN 1676-1:2007 Iron ores. Determination of copper. Part 1: 2,2'-Biquinolyl spectrophotometric method
TCVN 1676-2:2007 Iron ores. Determination of copper. Part 2: Flame atomic absorption spectrometric method
TCVN 1676-86 Iron ores. Determination of copper content
TCVN 1677-86 Cloth footwear for export. Specifications
TCVN 167-86 Canned foods. Packaging, marking, transportation and storage
TCVN 1678-86 Cloth footwear for export. Test methods
TCVN 1679-75 Cloth footwear for export. Packaging, marking, transportation and storage
TCVN 168-1991 Canned vegetables. Cucumber pickles
TCVN 1682:1994 Canned fruit juices. Orange juice
TCVN 1683-86 Bread. Specification
TCVN 1684-91 Diesel engines. General technical specifications
TCVN 16-85 System for design documentation. Designation of fasteners
TCVN 1685-91 Diesel engines. Rules of acceptance and test methods
TCVN 1686-86 Worm gearing with cylindrical worm. Tolerances
TCVN 1687-86 Bevel and hypoid gear drives. Tolerances
TCVN 1688-75 Amperemeters. Vocabulary
TCVN 1691-1975 Manual arc-welded joints. Types and basic dimensions
TCVN 1692-91 Bicycles. Technical requirements
TCVN 1693:1995 Hard coal. Sampling
TCVN 1693:2008 Hard coal and coke. Manual sampling
TCVN 1694-75 Chemical products. Sampling and preparation of samples
TCVN 1695-87 Refined and white sugars. Specifications
TCVN 1696-87 Refined and white sugars. Test methods
TCVN 1697-87 Mulberry silkworn raw cocoons. Specifications
TCVN 1699-86 Rice seeds. Nomenclature and definitions
TCVN 1700-86 Rice seeds. Test methods
TCVN 1701-75 Bull sperm. Specifications
TCVN 1705-85 Automobile engines. Lever shafts. Specifications
TCVN 1706-85 Automobile engines. Transfer bars. Specifications

List of TCVN 2010

http://hsevn.com
TCVN 1707-85 Automobile engines. Transfer bar bolts. Specifications
TCVN 1708-85 Automobile engines. Transfer bar nuts. Specifications
TCVN 1709-85 Automobile engines. Valve springs. Specifications
TCVN 1710-85 Automobile engines. Cam shafts. Specifications
TCVN 1711-85 Automobile engines. White alloy liners of cam shafts. Specifications
TCVN 1712-85 Automobile engines. Filling valves and escape valves. Specifications
TCVN 1713-85 Automobile engines. Lifting jacks. Specifications
TCVN 1714-85 Automobile engines. Piston pins. Specifications
TCVN 1715-85 Automobile spare parts. Ball pin cups. Technical specifications
TCVN 1716-85 Automobile spare parts. Steering wheel swing pins. Specifications
TCVN 1717-85 Automobile spare parts. Steering ball pins. Specifications
TCVN 1718-85 Automobile spare parts. Half-axles. Specifications
TCVN 1719-85 Automobile diesel engines. Brass lead liners of neck of lever shafts and transmission bars. Specifications
TCVN 172:1997 Hard coal. Determination of moisture content
TCVN 172:2007 Hard coal. Determination of total moisture
TCVN 1720-85 Automobile engines. Packing pans of necks of lever shafts and transmission bars. Specifications
TCVN 1721:1993 Internal combustion engines. Piston rings. Test methods
TCVN 1724-1:2007 Internal combustion engines. Piston pins. Part 1: General specifications
TCVN 1724-85 Diesel and gas engines. Piston pins. Specifications
TCVN 1726-85 Diesel and gas engines. Inlet valves and exhaust valves. Technical requirements
TCVN 172-75 Coal, anthracite, half anthracite and schist. Determination of moisture content
TCVN 1727-85 Diesel and gas engines. Cam shafts. Specifications
TCVN 1728-85 Diesel and gas engines. Connecting rods. Specifications
TCVN 1729-85 Diesel and gas engines. Nuts of connecting rod. Specifications
TCVN 173:1995 Solid mineral. Determination of ash content
TCVN 173:2007 Solid mineral fuels. Determination of ash
TCVN 1730-85 Diesel and gas engines. Connecting rod bolts. Specifications
TCVN 1731-85 Diesel and gas engines. Crankshafts. Technical requirements
TCVN 1734-1985 Tractor and combine engines. Piston pins. Specifications
TCVN 1736-1985 Tractor and combine engines. Filling and escape valves. Specifications
TCVN 1737-1985 Tractor and combine engines. Transmission bars. Specifications
TCVN 1738-1985 Tractor and combine engines. Transmission bar bolts. Specifications
TCVN 1739-1985 Tractor and combine engines. Nuts of transmission bar bolts. Specifications
TCVN 174:1995 Hard coal and coke. Determination of volatile matter content
TCVN 174:2007 Hard coal and coke. Determination of volatile matter
TCVN 1740-1985 Tractor and combine engines. Lifting jacks. Specifications
TCVN 1741-1985 Tractor and combine engines. Cam shafts. Specifications
TCVN 1743-86 Machine tools and wood working machines. General conditions for testing rigidity

List of TCVN 2010

http://hsevn.com
TCVN 1746-75 Shapers. Standards of accuracy and rigidity
TCVN 1748:2007 Textiles. Standard atmospheres for conditioning and testing
TCVN 1748-91 Textiles. Standard atmospheres for conditioning and testing
TCVN 1749:1986 Woven fabrics. Sampling for testing
TCVN 175:1995 Solid mineral fuels. Determination of total sulphur content. Eschka method
TCVN 1750:1986 Textiles. Determination of moisture
TCVN 1751-86 Woven fabrics. Measurement of length and width
TCVN 1752-86 Woven fabrics. Determination of weight
TCVN 1753:1986 Woven fabrics. Determination of density of yarn
TCVN 1754:1986 Woven fabrics. Determination of breaking load and elongation at break
TCVN 1755-86 Woven fabrics. Determination of dimensional change after washing
TCVN 1757-75 Defects of wood. Terms, definitions and determination of defects
TCVN 1758-1986 Sawn wood. Specifications based on its defects
TCVN 1761-86 Timber for making plywood boards and spindles. Types of wood and basic dimensions
TCVN 1762-75 Timber for making plywood board and spindle. Specifications
TCVN 1763:2008 Soy sauce
TCVN 1763-86 Nuoc cham' sauce. Specifications
TCVN 1764:2008 Soy sauce. Test methods
TCVN 1764-75 Nuoc cham' sauce. Test methods
TCVN 1765-1975 Structural carbon steels. Marks and specifications
TCVN 1766-1975 High quality structural carbon steels. Marks and specifications
TCVN 1767-1975 Spring steels. Marks and specifications
TCVN 176-86 Refractory materials. Determination of compression strength
TCVN 1768-75 Secondary ferrous metals. Classification and specifications
TCVN 1769-1975 Metallic raw recuperation. Safety requirements against explosion under treatment
TCVN 1770-86 Construction sand. Specifications
TCVN 1771-87 Crushed stones, gravels and crushed gravels for construction. Specifications
TCVN 1772-87 Stones and gravels for construction. Test methods
TCVN 1773-1:1999 Agricultural tractors. Test procedures. Part 1. Power test for power take-off
TCVN 1773-10:1999 Agricultural tractors. Test procedures. Part 10. Hydraalic power at tractor/implement interface
TCVN 1773-11:1999 Agricultural tractors - Test procedures. Part 11. Steering capability of wheeled tractors
TCVN 1773-12:1999 Agricultural tractors and machines. Engine test procedures (bench test). Part 12. Net power
TCVN 1773-13:1999 Agricultural wheeled tractors. Test procedures. Part 13. Operator's seat. Laboratory measurement of transmitted vibration
Tractors and machinery for agricultural and forestry. Test procedures. Part 14. Measurement of noise at the operator's position.
TCVN 1773-14:1999
Survey method
TCVN 1773-15:1999 Agricultural and forestry vehicles. Test procedures. Part 15. Determination of braking performance
Agricultural tractors and self-propelled machines. Test procedures. Part 16. Performance of heating and ventilation systems in
TCVN 1773-16:1999
closed cabs

List of TCVN 2010

http://hsevn.com
Agricultural and forestry tractors. Test procedures. Part 17. Methods of operational technological evalution under pratical field
TCVN 1773-17:1999
conditions
TCVN 1773-18:1999 Agricultural forestry tractors. Test methods. Part 18. Evalution of operational reliability
TCVN 1773-2:1999 Agricultural tractors. Test procedures. Part 2. Rear three-point linkage lifting capacity
TCVN 1773-3:1999 Agricultural tractors. Test procedures. Part 3. Turning and clearance diameters
TCVN 1773-4:1999 Agricultural tractors. Test procedures. Part 4. Measurement of exhaust smoke
TCVN 1773-5:1999 Agricultural tractors. Test procedures. Part 5. partial power PTO (Non-mechanically transmitted power)
TCVN 1773-6:1999 Agricultural tractors. Test procedures. Part 6. Centre of gravity
TCVN 1773-7:1999 Agricultural tractors. Test procedures.Part 7. Axle power determination
TCVN 1773-8:1999 Agricultural tractors. Test procedures.Part 8. Engine air cleaner
TCVN 1773-9:1999 Agricultural tractors. Test procedures. Part 9. Power test for drawbar
TCVN 1773-91 Agricultural tractors. Test methods
TCVN 1774-75 Tobacco seeds. Specification
TCVN 1775-75 Tobacco seeds. Test methods
TCVN 1776:1995 Rice seeds. Technical requirements
TCVN 1776:2004 Rice seed. Technical requirements
TCVN 1777-76 Common filament electric light heads. Specifications
TCVN 177-86 Refractory materials. Determination of specific mass
TCVN 1778-76 Piston-type internal combustion engines. Terms
TCVN 1779-76 Road vehicles and tractors. Vocabulary
TCVN 1780-76 Wool. Specifications
TCVN 1781:1976 Wool. Marking, packaging, transportation and storage
TCVN 1782-76 Carpet wool. Specifications
TCVN 1783-76 Carpet wool. Marking, packaging, transportation and storage
TCVN 1784:1976 Wool. Test methods
TCVN 1785-76 Chain transmission. Chain wheels for roller and bush chains. Bushes and roller bushes
TCVN 1786-76 Chain transmission. Chain wheels for round link chains and hauling chains of normal durability
TCVN 1787-76 Chain transmission. Chain wheels for gearing chains
TCVN 178-86 Refractory materials. Determination of water absorption porosity and volumetric mass
TCVN 1788-76 Chain transmission. Chain wheels for crane block chains
TCVN 1789-76 Chain transmission. Chain wheels for dismountable hauling chains. Profiles and tolerances
TCVN 1790:1999 Coal of Hon Gai. Cam Pha. Technical requirements
TCVN 1790-84 Coal of Hong gai-Cam pha. Specifications
TCVN 1791-84 Coal for gas generators. Specifications
TCVN 1792-84 Coal for steam boilers with fixed lattices. Specifications
TCVN 1793-76 Glycerin 94% for industrial use
TCVN 1794-76 Glycerin for industrial use. Test methods
TCVN 1795:1993 Refined jute fibres. Quality classification

List of TCVN 2010

http://hsevn.com
TCVN 1796:1993 Refined jute fibres. Test methods
TCVN 1797-76 Tractor engines. Fly wheels. Specifications
TCVN 179-86 Refractory materials. Determination of fireproofness
TCVN 1799-76 Automobile engines. Cast iron valve guiding pipes
TCVN 1800-76 Tractor and combine diesels. Valve guiding tubes. Specifications
TCVN 1801-76 Straight cylindrical involute spline joints. Basic dimensions and limited tolerances
TCVN 1802-76 Triangular spline joints. Basic dimensions and limited errors
TCVN 1803-76 Rectangular spline joints. Dimensions
TCVN 1804-76 Involute cylindrical gearing. Tooth profile. Modules less than 1mm
TCVN 1805-76 Cylindrical worm-gear drive. Modules less than 1mm. Tolerances
TCVN 1806-76 Volumetrical hydraulic and pneumatic systems. Symbols
TCVN 1807-76 System for design documentation. Rules of making construction drawings of cylindrical gears
TCVN 180-86 Apatite ores. Test methods
TCVN 1808-76 System for design documentation. Rules of making construction drawings of bevel gears
TCVN 1809-76 System for design documentation. Rules of making construction drawings of racks
TCVN 1810-76 System for design documentation. Rules of making construction drawings of cylindrical worms and worm wheels
TCVN 1811:2009 Steel and iron. Sampling and preparation of samples for the determination of chemical composition
TCVN 1811-76 Steel and Cast iron. General rules. Method for preparation of samples for chemical analysis
TCVN 1812-76 Steel and cast iron. Chemical analysis. Determination of chrome content
TCVN 1813-76 Steel and cast iron. Chemical analysis. Determination of nickel content
TCVN 1814-76 Steel and cast iron. Chemical analysis. Determination of silicon content
TCVN 1815-76 Steel and cast iron. Chemical analysis. Determination of phosphorus content
TCVN 1816-76 Steel and cast iron. Chemical analysis. Determination of cobalt content
TCVN 1817-76 Steel and cast iron. Chemical analysis. Determination of molypdenum content
Electric line networks and electric sources jointed in electric networks and equipments accepting electric energy. Series of
TCVN 181-86
nominal voltages
TCVN 1818-76 Steel and cast iron. Chemical analysis. Determination of copper content
TCVN 1819-76 Steel and cast iron. Chemical analysis. Determination of manganese content
TCVN 1820-76 Steel and cast iron. Chemical analysis. Determination of sulphur content
TCVN 1821-76 Steel and cast iron. Chemical analysis. Determination of total carbon content
TCVN 1822:1993 Tool carbon steels
TCVN 1823:1993 Tool alloy steels
TCVN 1824:1993 Metallic wire. Tensile test method
TCVN 1825:1993 Metallic wire. Wrapping test method
TCVN 1825:2008 Metallic materials. Wire. Wrapping test
TCVN 1826:1993 Metallic wire. Bend test method
TCVN 1826:2006 Metallic materials. Wire. Reverse bend test
TCVN 182-65 Electric apparatuses used in industry. Series of nominal currents

List of TCVN 2010

http://hsevn.com
TCVN 1827:1993 Metallic wire. Torsion test method
TCVN 1827:2006 Metallic materials. Wire. Simple torsion test
TCVN 1829:2008 Ductile iron pipelines.Tube. Flanging test
TCVN 1829-76 Metal tubes. Rolling test
TCVN 1830:2008 Metallic materials. Tube. Flattening test
TCVN 1830-76 Metal tubes. Compression test
TCVN 1832:2008 Metallic materials. Tube. Hydrolic pressure test
TCVN 1832-76 Metal tubes. Hydraulic pressure test
TCVN 1833-88 Agricultural machinery. Rotary ploughs. Specifications
TCVN 1834:1994 Switches
TCVN 1835:1994 Lampholders
TCVN 1836:2008 Feldspar. General specifications
TCVN 1836-76 Feldspar
TCVN 1837:2008 Feldspar. Methods of chemical analysis
TCVN 1837-76 Feldspar. Methods of chemical analysis
TCVN 183-85 Switches. Series of nominal currents
TCVN 1838-76 Glass packages. Bottles and pots for medicaments
TCVN 1839-76 Glass packages. Bottles for liquid medicaments of 250 and 500 ml types. Basic dimensions
TCVN 1840-76 Glass packages. Pots for medicaments of 100, 200 and 400 ml types. Basic dimensions
TCVN 1841:1976 Job safety gloves
TCVN 1842-76 Tropical engineering. Terms and definitions
TCVN 1843:1989 Hot-rolled square steels. Sizes, parameters and dimensions
TCVN 1844-89 Hot-rolled steel strips
TCVN 1845-1989 Hot-rolled steel flats. Sizes, parameters and dimensions
TCVN 1846-1976 Steel wire. Classification
TCVN 1847-1976 Cold-drawn round steel wires. Sizes, parameters and dimensions
TCVN 1848-1976 Wire from carbon constructional steel
TCVN 184-85 Fuse wires, fuses. Series of nominal currents
TCVN 1849-1976 Low carbon quality steel wire
TCVN 1850-76 Hol-rolled steel billets. Sizes, parameters and dimensions
TCVN 1851-76 Rolled steel blooms. Sizes, parameters and dimensions
TCVN 1852-76 Plate steel billets. Sizes, parameters and dimensions
TCVN 1853-1976 Rolled billets from medium carbon and low alloy steel. Specifications
TCVN 1854-1976 Rolled billets from high quality carbon, medium alloy and high alloy steels. Technical requirements
TCVN 1855-1976 Forging. Terms
TCVN 1856:1976 Textiles. Tex system
TCVN 1857-86 Chickens for slaughter
TCVN 1858-1986 Fresh chicken eggs

List of TCVN 2010

http://hsevn.com
TCVN 185-86 System for design documentation. Graphical symbols on electrical diagrams. Electrical equipments and wires on plans
TCVN 1860-76 Cotton fabrics. White cotton for export. Technical requirements
TCVN 1861-76 Cotton fabrics. Blue cotton for export. Technical requirements
TCVN 1862-1:2000 Paper and board. Determination of tensile properties. Constant rate of loading method
TCVN 1862-2:2000 Paper and board. Determination of tensile properties. Constant rate of elongation method
TCVN 1862-2:2007 Paper and board. Determination of tensile properties. Part 2: Constant rate of elongation method
TCVN 1862-76 Paper and board. Determination of breaking strength andelongation at break
TCVN 1863-76 Paper and board. Determination of tar yield
TCVN 1864:2001 Paper board and pulps. Determination of residue (ash) on ignition at 900oC
TCVN 1864-76 Paper and board. Determination of ash content
TCVN 1865:2000 Paper, board and pulp. Measurement of ISO brightness (diffuse blue reflectance factor)
TCVN 1865:2007 Paper, board and pulps. Measurement of diffuse blue reflectance factor (ISO brightness)
TCVN 1865-76 Paper and board. Determination of whiteness
TCVN 1866:2000 Paper. Determination of folding endurance
TCVN 1866:2007 Paper. Determination of folding endurance
TCVN 1866-76 Paper and board. Determination of folding strength
TCVN 1867:2001 Paper, board. Determination of moisture content. Oven-drying method
TCVN 1867:2007 Paper and board. Determination of moisture content. Oven-drying method
TCVN 1867-76 Paper and board. Determination of humidity
TCVN 1868-76 Paper and board. Determination of dustiness
TCVN 1869:2008 Oil of aniseed (Pimpinella anisum L.)
TCVN 1869-76 Aniseed oil. Specifications
TCVN 187:1994 Canned fruits. Canned pineapple
TCVN 187:2007 Canned pineapple
TCVN 1870:2007 Citrus marmalade
TCVN 1870-76 Canned fruits. Orange marmalade. Specifications
TCVN 1871:2007 Pineapples
TCVN 1871-88 Fresh pineapple
TCVN 1872:2007 Bananas
TCVN 1872-86 Fresh bananas for export
TCVN 1873:2007 Oranges
TCVN 1873-86 Fresh oranges for export
TCVN 1874:1995 Wheat flour. Determination of wet gluten
TCVN 1875:1976 Noodles. Test methods
TCVN 1876-76 Hexagon head bolts (rough). Structure and dimensions
TCVN 1877:1976 Small hexagon head bolts (rough). Structure and dimensions
TCVN 1878-76 Small hexagon head bolts with fitting neck (rough). Structure and dimensions
TCVN 1879-76 Rag bolts with flat countersunk head (rough). Structure and dimensions

List of TCVN 2010

http://hsevn.com
TCVN 1880-76 Square neck bolts with flat countersunk head (rough). Structure and dimensions
TCVN 1881-76 Square neck bolts with large contersunk head (rough). Structure and dimensions
TCVN 1885-76 Cup nib head bolts with rag neck (rough). Structure and dimensions
TCVN 188-66 Canned meat. Stewed pork
TCVN 1886-76 Cup nib head rag bolts (rough). Structure and dimensions
TCVN 1887-76 Large cup nib head bolts (rough). Structure and dimensions
TCVN 1888-76 Deep dormant bolts (rough). Structure and dimensions
TCVN 1889:1976 Hexagon head bolts (semifinished). Structure and dimensions
TCVN 189:1993 Essential oils. Test methods
TCVN 1890:1976 Small hexagon head bolts (semifinished). Structure and dimensions
TCVN 1891-76 Small hexagon head fit bolts (semifinished). Structure and dimensions
TCVN 1892:1976 Hexagon head bolts (finished). Structure and dimensions
TCVN 1893:1976 Small hexagon head bolts (finished). Structure and dimensions
TCVN 1894-76 Small hexagon head fit bolts (finished). Structure and dimensions
TCVN 1895:1976 Small hexagon head bolts (finished) used for bored holes. Structure and dimensions
TCVN 1896:1976 Hexagon rough nuts. Structure and dimensions
TCVN 1897:1976 Hexagon nuts (semifinished). Structure and dimensions
TCVN 1898:1976 Small hexagon nuts (semifinished). Structure and dimensions
TCVN 1899:1976 Small hexagon thin nuts (semifinished). Structure and dimensions
TCVN 19:1985 System for design documentation. Rules for presenting spline joints on drawings
TCVN 1900:1976 Hexagon thick nuts (semifinished). Structure and dimensions
TCVN 1901-76 Special thick hexagon nuts (semifinished). Structure and dimensions
TCVN 1902:1976 Hexagon thin nuts (semifinished). Structure and dimensions
TCVN 1903:1976 Slotted hexagon nuts (semi-finished). Structure and dimensions
TCVN 1904:1976 Slotted hexagon thin nuts (semi-finished). Structure and dimensions
TCVN 1905:1976 Hexagon nuts (finished). Structure and dimensions
TCVN 1906:1976 Small hexagon nuts (finished). Structure and dimensions
TCVN 1907:1976 Small hexagon thin nuts (finished). Structure and dimensions
TCVN 1908:1976 Hexagon thick nuts (finished). Structure and dimensions
TCVN 190-85 Handcarts of type 250. Basic dimensions and specifications
TCVN 1909-76 Special hexagon thick nuts (finished). Structure and dimensions
TCVN 1910:1976 Hexagon thin nuts (finished). Structure and dimensions
TCVN 1911:1976 Slotted hexagon nuts (finished). Structure and dimensions
TCVN 1912:1976 Slotted hexagon thin nuts (finished). Structure and dimensions
TCVN 1913:1976 Slotted small hexagon nuts (finished). Structure and dimensions
TCVN 1914:1976 Slotted small hexagon thin nuts (finished). Structure and dimensions
TCVN 1915:1976 Cap nuts structure and dimensions
TCVN 1916:1995 Bolts, screws, studs and nuts. Technical requirements

List of TCVN 2010

http://hsevn.com
TCVN 1917:1993 Metric threads. Fit with gap. Tolerances
TCVN 191-85 Handcarts of type 250. Wheel bushes and spindle noses
TCVN 192-1986 Preferred dimensions
TCVN 1922:1999 Absorbable surgical suture (catgut). Specifications
TCVN 193-66 Paper. Sizes
TCVN 194-66 Shafts and pillow blocks. Nomenclature and definitions
TCVN 1965-77 Comparison of sponge filters
TCVN 1966-77 Standard atmosphere for measuring and testing
TCVN 197:2002 Metallic materials. Tensile testing at ambient temperature
TCVN 1975-77 Stockbreeding. Vocabulary
TCVN 1976-88 Canned foods. Determination of heavy metal contents. General regulations
TCVN 1977-88 Canned foods. Determination of copper content by photometric method
TCVN 197-85 Metals. Method of tractional test
TCVN 1978-88 Canned foods. Determination of lead content by photometric method
TCVN 1979-88 Canned foods. Determination of zinc content by photometric method
TCVN 198:2008 Metallic materials. Bend test
TCVN 1980:1988 Canned foods. Determination of iron content by photometric method
TCVN 1981-88 Canned foods. Determination of tin content by titrimetric method
TCVN 1982-77 Audio frequency amplifiers
TCVN 1984:1994 Power transformers. General technical requirements
TCVN 1985:1994 Power transformers. Test methods
TCVN 1986-77 Transformers of small powers. General specifications
TCVN 1987:1994 Three-phase asynchronous squirrel cage motors of powers from 0,55 to 90 kW
TCVN 198-85 Metals. Method of bending test
TCVN 1988-77 Electrical equipments for voltages up to 1000 V. Enclosures. Degrees of protection
TCVN 1989:1977 Involute cylindrical external gear drive. Calculation of geometry
Cylindrical gear pairs, modules less than 1mm. Straight cylindrical gears and hetical cylindrical gears. Types, basic parameters
TCVN 1990-77
and dimensions
TCVN 1991-77 Bevel gear pairs. Basic parameters
TCVN 1992:1995 General purpose reducers. General specifications
TCVN 1993-77 Valves for bicycle rubber tubes. Types and dimensions
TCVN 1994-1977 Threads of valves used for inner tyres. Profiles, parameter and basic dimensions and tolerances
TCVN 1995-77 Valves for bicycle rubber tubes. Specifications
TCVN 1996-77 Knee-and-column milling machines. Norms of accuracy and rigidity
TCVN 1997-1977 Circular grinding machines. Basic dimensions
TCVN 1998-77 Cylindrical grinding machines. Norms of accuracy and rigidity
TCVN 1999-1977 Long grinding machines. Basic dimensions


List of TCVN 2010

http://hsevn.com
TCVN 200:1995 Solid mineral fuels. Determination of gross calorific value by the calorimeter bomb method and calculation of net calorific value
Solid mineral fuels. Determination of gross calorific value by the bomb calorimetric method, and calculation of net calorific
TCVN 200:2007
value
TCVN 2000-1977 Longitudinal grinding machines. Norms of accuracy and rigidity
TCVN 2001-77 Horizontal broaching machines. Types, basic parameters and dimensions
TCVN 2002:2008 Conditions of acceptance for horizontal internal broaching machines. Testing of the accuracy
TCVN 2002-77 Broaching machines. Norms of accuracy
TCVN 2003-77 Rubber O-ring gaskets for hydraulic and pneumatic systems
TCVN 2004:1977 Gear hydraulic pumps. Basic parameters
TCVN 2005:1977 Filters for hydraulic and lubricatiing systems. Basic parameters
TCVN 2006-77 Hydraulic accumulators. Basic parameters
TCVN 2007-77 Hydraulic and pneumatic equipments. Basic parameters
TCVN 2008:1977 Gear hydraulic motors. Basic parameters
TCVN 2009:1977 Vane hydraulic motors. Basic parameters
TCVN 2010-77 Hydraulic and pneumatic teloscoping cylinders. Basic parameters
TCVN 2011:1977 Piston hydraulic pumps. Basic parameters
TCVN 2012:1977 Piston hydraulic motors. Basic parameters
TCVN 2013:1977 Reservoirs for hydraulic and lubricating systems. Nominal capacities
TCVN 2014-77 Hydraulic and pneumatic cylinders. Basic parameters
TCVN 2015:1977 Nominal flows of fluids
TCVN 2016:1977 Positive displacement pumps and motors. Working capacities
TCVN 2017:1977 Hydraulic, pneumatic and lubricating systems. Conventional diameters
TCVN 2018:1977 Cylindrical helical compression and tension springs made of round steel wire. Classification
TCVN 201-86 Refractory materials. Determination of shrinkage or expansion
TCVN 2019:1977 Cylindrical helical compression and tension springs made of round steel wire. Determination of dimensions
TCVN 2020:1977 Cylindrical helical compression and tension springs of class I and of grade 1 made of round steel wire. Basic parameters
TCVN 2023:1977 Cylindrical helical compression springs of class I and of grade 4 made of round steel wire. Basic parameters
TCVN 2024:1977 Cylindrical helical compression and tension springs of class II and of grade 1 made of round steel wire. Basic parameters
TCVN 2025:1977 Cylindrical helical compression and tension springs of class II and of grade 2 made of round steel basic. Basic parameters
TCVN 2026-77 Cylindrical helical compression and tension springs of class II and of grade 3 made of round steel wire. Basic parameters
TCVN 2027-77 Cylindrical helical compression and tension springs of class II and of grade 4 made of round steel wire. Basic parameters
TCVN 202-86 Refractory materials. Determination of deformation at compression
TCVN 2028-77 Cylindrical helical compression springs of class 3 and grade 1 made of round steel wire. Basic parameters
TCVN 2029-77 Cylindrical helical compression springs of class III and of grade 2 made of round steel wire. Basic parameters
TCVN 2030-77 Cylindrical helical compression springs of class III and of grade 3 made of round steel wire. Basic parameters

List of TCVN 2010

http://hsevn.com
TCVN 2031-77 Cylindrical helical compression and tension springs made of round steel wire. Specifications
TCVN 2032-77 Disc springs
TCVN 2033-77 Disc springs for electrical purpose
TCVN 2034-77 Screw thread runout. Washout threads, undercuts and chamfers
TCVN 2035-77 Spring pins. Dimensions
TCVN 2036-77 Taper grooved pins. Dimensions
TCVN 2037-77 Parallel grooved pins
TCVN 2038-1977 Parallel pins with split pin holes. Dimensions
TCVN 2039-1977 Taper pins with external thread. Dimensions
TCVN 2040:1986 Taper pins with internal thread
TCVN 2041-1986 Taper pins
TCVN 2042-1986 Parallel pins
TCVN 2043-1977 Split pins
TCVN 2044-77 Metrology. Vocabulary
TCVN 2045-77 Diesel engines. General parameters
TCVN 2046-90 Diesel injectors. Technical requirements
TCVN 2047-77 Diesels. Plunger couples of fuel pumps. Technical requirements
TCVN 2048:1993 Single phase plug connector
TCVN 2049-77 Symbols for voltages
TCVN 2050-77 Metallic control cases, boards, boxes. Enclosures, frames. Basic dimensions
TCVN 2051-77 Caps for light sources. Types and basic dimensions
TCVN 2052:1993 Tin. Technical requirements
TCVN 2053:1993 Galvanized steel wire for general purpose
TCVN 2054-1977 Carbon steel skelps
TCVN 2055-1977 Seamless hot-rolled steel tubes. Sizes, parameters and dimensions
TCVN 2056-1977 Seamless cold-drawn and hot-rolled steel tubes. Sizes, parameters and dimensions
TCVN 2057-77 Hot-rolled structural steel thick plats and wide flats specification
TCVN 2058-77 Hot-rolled thick steel plates. Sizes, parameters and dimensions
TCVN 2059-77 Hot-rolled wide steel flats. Sizes, parameters and dimensions
TCVN 2062-86 Artificial lighting in cotton textile mills
TCVN 2063-86 Artificial lighting in engineering works
TCVN 2064-77 Frozen shrimps. Specification
TCVN 2065-77 Frozen fish fillets. Specifications
TCVN 2066-77 Frozen dressed fishes. Specifications
TCVN 2068:1993 Frozen fishery products. Test methods
TCVN 2073-78
TCVN 2078-85 Car tank. Methods and means of verification
TCVN 2080:2007 Chillies and capsicums, whole or ground (powdered). Specification

List of TCVN 2010

http://hsevn.com
TCVN 2080-86 Powdered chillies for export
TCVN 2081-77 Printing inks. Sampling methods
TCVN 2082-77 Printing inks. Determination of fineness
TCVN 2083-77 Printing inks. Determination of specific viscosity for condensed ink
TCVN 2084-77 Printing inks. Determination of specific viscosity for incondensed ink
TCVN 2085-77 Printing inks. Method of making trace
TCVN 2086-77 Printing inks. Method of comparison of colors
TCVN 2087-77 Printing inks. Determination of drying time
TCVN 2088-77 Printing inks. Determination of impregnation by oil
TCVN 2089-77 Printing inks. Packaging, marking, transportation and storage
TCVN 2090:1993 Paints. Sampling, packaging, marking, transportation and storage
TCVN 2090:2007 Paints, varnishes and raw materials for paints and varnishes. Sampling
TCVN 2091:1993 Paints. Determination of fineness by scales
TCVN 2091:2008 Paints, varnishes and printing inks. Determination of fineness of grind
TCVN 2092:1993 Paints. Determination of flow time by using of a flow cup
TCVN 2092:2008 Paints and varnishes. Determination of flow time by use of flow cups
TCVN 2093:1993 Paints. Determination of solid content and coating powder content
TCVN 2094:1993 Paints. Method for making paint coating
TCVN 2095:1993 Paints. Determination of hiding power
TCVN 2096:1993 Paints. Determination of drying time and dryness
TCVN 209-66 Trapezoidal screw threads with diameters from 10 to 640 mm. Basic dimensions
TCVN 2097:1993 Paints. Gross cut test for the determination of adhesion
TCVN 2098:1993 Paints. Determination of hardness of coating
TCVN 2098:2007 Paints and varnishes. Pendulum damping test
TCVN 2099:1993 Paints. Determination of bending resistance of coating
TCVN 2099:2007 Paints and varnishes. Bend test (cylindrical mandrel)
TCVN 2100:1993 Paints. Determination of impact resistance of filons
TCVN 2100-1:2007 Paints and varnishes. Rapid-deformation (impact resistance) tests. Part 1: Falling-weight test, large-area indenter
TCVN 2100-2:2007 Paints and varnishes. Rapid-deformation (impact resistance) tests. Part 2: Falling-weight test, small-area indenter
TCVN 2101:1993 Paints. Measurement of specular gloss of film
TCVN 2101:2008 Paints and varnishes. Determination of specular gloss of non-metallic paint films at 20 degrees, 60 degrees and 85 degrees
TCVN 2102:1993 Paints. Method for determination of colour
TCVN 2102:2008 Paints and varnishes. Visual comparison of the colour of paints
TCVN 2103:1994 PVC insulated wires
TCVN 2103:1994/SĐ 1:1995 PVC insulated wires
TCVN 2104-90 PVC covered conductors for electronics
TCVN 2105-90 Plastic covered conductors for communication
TCVN 2106:2002 Textiles. Care labelling code using symbols

List of TCVN 2010

http://hsevn.com
TCVN 2106:2007 Textiles. Care labelling code using symbols
TCVN 210-66 Trapezoidal screw threads with diameters from 10 to 300 mm tolerances
TCVN 2106-77 Textile products. Symbols for treatment
TCVN 2108:1977 Common garments. Terms and definitions
TCVN 2109-77 Garments. Sampling method
TCVN 2110-77 Trousers and shirts. Inspection methods
TCVN 2111-77 Shirts. Quality grades. Points score method
TCVN 2112-77 Trousers. Quality grades. Points score method
TCVN 2113-77 Gearing. Terminology of errors and tolerances. General concepts
TCVN 2114-77 Cylindrical gear pairs. Terminology of errors and tolerances
TCVN 2115-77 Bevel gear pairs. Terminology of errors and tolerances
TCVN 2116:1977 Reagents. Aluminium potassium sulphate
TCVN 211-66 Screw threads used for wood. Dimensions
TCVN 2117-77 Distilled water
TCVN 2118:1994 Silica bricks. Specifications
TCVN 2119:1991 Limestone
TCVN 212:1993 Marks for details with left-handed thread
TCVN 2129:2009 Textiles. Cotton fabrics and contton products. Methods of quantitative determinations of chemical residues
TCVN 2129-77 Cotton fabrics and products. Quantitative determination of residual chemical substances
TCVN 2130:2009 Textiles. Cotton fabrics and contton products. Methods of qualitative determinations of chemical residues
TCVN 2130-77 Cotton fabrics and products. Determination of characteristics of residual chemical substances
TCVN 2136-77 Technological preparation of production. Operation of mechanical treatment by cutting. Terms
TCVN 2140:1977 Hydraulic drives. General technical requirements
TCVN 2141:1977 Hydraulic and pneumatic drives and lubricating systems. Connecting threads
TCVN 2142:1977 Vane hydraulic pumps. Basic parameters
TCVN 2144:2008 Fluid power systems and components. Nominal pressures
TCVN 2144-77 Hydraulic and pneumatic drives and lubricating systems. Nominal pressures
TCVN 2145:1977 Hydraulic and pneumatic drives and lubricating systems. Nominal diameters
TCVN 214-66 Gearing. Vocabulary and symbols
TCVN 2146-77 Hydraulic and pneumatic drives and lubricating systems. Nominal capacities
TCVN 2147-77 Hydraulic and pneumatic drives and lubricating systems. Nominal speeds
TCVN 2148-77 Pneumatic drives. Nominal flows of air
TCVN 2149-77 Hydraulic cylinders. General technical requirements
TCVN 2150-77 Reservoirs for hydraulic and lubricating systems. General specifications
TCVN 2151:1977 Positive displacement hydraulic pumps and motors. General specifications
TCVN 2152-77 Filters for hydraulic and lubricating systems. General technical requirements
TCVN 2153-77 Hydraulic accumulators. General specifications
TCVN 2154-77 Hydraulic drives. Methods of measurement

List of TCVN 2010

http://hsevn.com
TCVN 2155-77 Tractor springs. Specifications
TCVN 2156-77 Leaf spring for automobiles
TCVN 2157-77 Tractor power gears. Specifications
TCVN 2158-77 Tractor and combine diesels. Gears. Specifications
TCVN 2159-77 Tractor and combine diesels. Main and connecting rod bearings. Specifications
TCVN 2160-77 Diesel and gas engines. Main bearing and crank pin bearing bushings specifications
TCVN 2161-77 Automobile trailers and semitrailers. Shafts types, basis parameters and dimensions
TCVN 2162-77 Wheel scraper C-8
TCVN 2163-77 C-8 tyred scrapers. Blades
TCVN 2164-1977 Slotters. Basic dimensions
TCVN 2166-77 Variable spead block chain driver. Basic parameters
TCVN 2167-77 Safety ball safety clutches on the sleeve. Basic parameters and dimensions
TCVN 2168-77 Safety claw clutches on the sleeve. Basic parameters and dimensions
TCVN 2169-77 Safety friction clutches on the sleeve. Basic parameters and dimensions
TCVN 2172-87 Tin. General requirements for the methods of chemical analysis
TCVN 2173-87 Tin. Determination of iron content
TCVN 2174-87 Tin. Determination of aluminium content
TCVN 2175-87 Tin. Determination of antimony content
TCVN 2176-87 Tin. Determination of arsenic content
TCVN 2178-87 Tin. Determination of zinc content
TCVN 2179-87 Tin. Determination of bismuth content
TCVN 2180-87 Tin. Determination of lead content
TCVN 2181-87 Tin. Determination of sulphur content
TCVN 2182-87 Tin. Determination of copper, bismuth, iron, lead, antimony and arsenic contents by spectral method
TCVN 2183:1993 Duck feathers for export
TCVN 2184-1977 Hexagon socket set screws with flat point. Structure and dimensions
TCVN 2185:1977 Hexagon socket set screws with dog point. Structure and dimensions
TCVN 2186-77 Screws with thick knurled head. Structure and dimensions
TCVN 2187-77 Screws with thin knurled heads. Structure and dimensions
TCVN 2188-77 Screws with thin knurled heads and cone point. Structure and dimensions
TCVN 2189-77 Screws with thin knurled heads, half dog point and flat cone point. Structure and dimensions
TCVN 2190-77 Screws with thin knurled heads and cup point. Structure and dimensions
TCVN 2191-77 Screws with thin knurled head and round point. Structure and dimensions
TCVN 2192-77 Screws with thin knurled heads and long dog point. Structure and dimensions
TCVN 2193-1977 Cheese head screws (finished). Structure and dimensions
TCVN 2194-1977 Fasteners. Rules of acceptance
TCVN 2195-1977 Fasteners. Packing and marking
TCVN 2196-77 Fittings and appliances for marine pipe systems. Flanges. Types

Tcvn2010

Empfohlen

Empfohlen

Weitere ähnliche Inhalte

Ähnlich wie Tcvn2010

Ähnlich wie Tcvn2010 (12)

Tcvn2010