1. The first thing that you have to do is to
attach the j-bracket with your tripod.
Sometimes the tripods screw may not be
long enough. You can simply push the
screw through no those occasions. If
that doesn't work then simply get a
longer round head screw.
2. THE THIRD STEP INVOLVES OPENING THE PROMPTER
AND ATTACHING SOME METAL SUPPORT. DO THIS BY
SIMPLY INSERTING AN END INTO A HOLE ON THE SIDE
OF THE GLASS. THE OTHER END WILL GO INTO THE
PLATFORM. THE HOLES MAY NOT ALIGN BUT DON'T
WORRY AS THAT IS PART OF THE PLAN.
3. AFTER THIS YOU NEED TO TAKE THE IPAD AND PUT IT ONTO
THE PLATFORM OF THE PROMPTER. IF YOU HAVE A COVER
ON THE IPAD, REMEMBER TO TAKE IT OFF BEFORE YOU DO
THIS. YOU WILL SEE THAT PUTTING THE IPAD RIGHT AT THE
BACK OF THE PLATFORM GIVES THE BEST VIEWING
EXPERIENCE OF THE IMAGE THAT IS PROJECTED.
4. PUT THE BLACK CAPE ONTO THE
IPAD PROMPTER BY SIMPLY LINING
THEIR VELCRO TABS WITH THE SIDES
OF THE IPAD PROMPTER.
