2. 1.
2.
3.
4.
INTRODUCTION
NECESSITY
TECHNIQUES
 STROKS
 STRIPLING
 TEXTURE
 SCIOGRAPHY
CONCLUSION

3.  DEFINITION- This plaster is a textured plaster
done in two layers in panels with grooves as
per pattern with different type of stone
chipping 10 mm. nominal size. Min thickness
is 30mm.
 COMPOSITION – ( 1 cement : 0.5 coarse sand : 2
stone chipping (10 MM nominal size. )
Stones- Dholpur & Kotastone.
 TYPES OF GRIT PLASTER-
types
chips.
Depend upon
of stone
 PROPERTIES




MOISTURE RESISTANCE - High
DURABILITY
- High durability
TERMITE RESISTANT
- Good
ENVIRONMENTAL HAZARDS- Good
FINISHING RESULTS
- Good
Textured
Finish

4.  APPLICATIONSPROCEDURE OF APPLICATION 1st LAYER- 12 mm cement plaster in 1: 4
Ratio.
 2nd LAYER- 1:0.5: 2 ( 1 cement : 0.5
coarse sand : 2 stone chipping
(10 MM nominal size. )
Stones- Dholpur & Kotastone.
 USES ARCHITECTURAL- Exterior finish of buildings.
Residential,
Commercial building,
Intuitional buildings
 NON-ARCHITECTURAL-Landscape
Elements
Like
feature
wall
boundary wall,
Pathways.
 BEST SUITED FOR- Public Buildings.

5.  RATES 

Grit Plaster
Groove
-270 RS./ sqm.
-20.50Rs/Run m.
 ADVANTAGES- Requires Low maintenance.
acoustical absorption
 DISADVANTAGES- It cant be use in interior
because of texture finish.

6.  DEFINITION- Brickwork is masonry produced by a bricklayer, using bricks tile
and mortar. Typically, rows of bricks in courses are laid one on top of another.
 COMPOSITION – Brick tile230mmx115mmx40 mm )
Cement mortar – (1:3-1:5)
 PATTERN IN BRICK TILE – English bond, Flemish Bond ,
40
other Patterns.
230
115
 PROPERTIES




MOISTURE RESISTANCE
DURABILITY
TERMITE RESISTANT
ENVIRONMENTAL HAZARDS
FINISHING RESULTS
-
- Good
High durability
Good
Moderate Resistant
Good reddish brown
Texture Finish

7.  APPLICATIONSPROCEDURE OF APPLICATION 1st LAYER- 10 mm base cement plaster in
1: 3-1:4 Ratio.
 2nd LAYER-Queen closer of Brick tile
(230mmx57.5mmx40mm)
 USES ARCHITECTURAL- Exterior finish of buildings.
Residential,
Commercial building,
Intuitional buildings.
 NON-ARCHITECTURAL-Landscape
Elements
Like
feature
wall
boundary wall,
Pathways.
 BEST SUITED FOR- Public Buildings
plain
areas.
40
in
230
57.5

8.  RATES 
Brick tile cladding
-320 RS./ sqm..
 ADVANTAGES- Requires Low maintenance.
acoustical absorption
 DISADVANTAGES- It is not good in interior
because of texture finish.

9.  DEFINITION-
Stone cladding is a thin layer of stone or simulated
stone applied to a surface of building.
 TYPES OF STONES–
NATURAL
STONE
SAND STONE , LIME
STONE,
GRANITE,QUARTZITE
MANUFACTURE
D STONE
MARBLE ,
MOSAIC,
POLISHED STONE,
FCD STONE,
SAND BLASTED STONE
STONE

10. 
PROPERTIES




MOISTURE RESISTANCE
DURABILITY
TERMITE RESISTANT
ENVIRONMENTAL HAZARDS
FINISHING RESULTS
textured
as/ stone
-
Good
High durability
High
High Resistant
Smooth &

11.  APPLICATIONSPROCEDURE OF APPLICATION 1st LAYER- 10 mm base cement plaster in
1: 3-1:4 Ratio.
 2nd LAYER- Stone panel as/ Spcs.
 USES ARCHITECTURAL- Exterior & interior finish
of buildings.
Residential,
Commercial building,
Instuitional buildings.
 NON-ARCHITECTURAL-Landscape Elements
Like feature wall
boundary wall, bird
bath
Pathways & fire place.
 BEST SUITED FOR- interior & exterior both

13.  RATES 


Rough stone
Local stone Polished stone
-320 RS./ sqm.
-
 ADVANTAGES- Requires Low maintenance. Easy to
clean. Good appearance. Cheap in hilly areas.
 DISADVANTAGES- costly in Plain areas ,