Secondary Storage Devices

1. Secondary Storage Devices
• Magnetic media
• Tape
• Disks
• Optical Media
• Compact Discs
• CD-R, WORM (Write Once, Read Many)
• CD-RW
• DVD
• DVD-R
• DVD-RW

2. Magnetic Tape
• What is magnetic tape?
• Thin layer of material capable of storing a
magnetic signal
• Usually contains Iron Oxide
• Protected by
backing layer called
the “Substrate”

3. Examples of Magnetic Media
• Some you are probably familiar with:
• Cassette tapes
• VHS video tape
• Computer Tape
• 8-track
• DAT

4. Pros and Cons of Magnetic Tape
• Inexpensive to store large amounts of
information.
• A reel of tape could store as much as 225 MB in
the early 1980s.
• No other storage technology could compare to
the price of tape
• Sequential access – Slow access
• Tapes are highly susceptible to magnetic fields
and changes in temperature and humidity
• Tapes are also susceptible to physical damage
• Tape miss-feeds
• Magnetic particle instabilities

5. Magnetic Tape Uses Today
• Today, tape based systems are usually used for
backup purposes only.
• Tape still provides the most cost effective method
of storing larger amounts of backup information
• Reliable as long as temperature is kept low
and humidity conditions are kept right.
• Although hard disks are increasingly used as a
backup mechanism, tapes are portable.
• Backups can be taken off-site for greater risk
prevention

6. Hard Disks
• Today, most people use Hard Disks for secondary
storage
• The basic technology used in hard disks is similar
to that of magnetic tape
• Magnetic material is layered onto a high-
precision aluminum disk
• The disk head can move to any point on the
platter almost instantly compared to tape
• With tape, the head touches the tape. With
disks, the head never touches the platter
• Tape moves at approx 5 cm/s. Disk platters
move at up to 7500 cm/s (272 km/h!)

7. Hard Disks
• To increase capacity, a hard disk will usually
contain several platters

8. Hard Disks
• The heads never touch the platters, but they are
very close. This makes hard disks susceptible to
mechanical shock.

9. Storing Information on a Hard Disk
• Each platter is broken up into tracks and sectors
• Tracks are concentric circles on the disk
• Each track is broken up into a series of sectors
Track (yellow ring)
Sector (yellow ring
between the lines)

10. Sectors and Blocks
• Sectors are further broken up into blocks
• A block is a fixed size unit of storage
• 512 bytes/block is most commonly used
• 1024 bytes/block is common with SCSI disks
• 2048 bytes/block is used with CDs
• If the user stores onto the hard disk a file which is
larger than the block size, then multiple blocks are
used.

11. Blocks and Files
• If a file takes up multiple blocks, it is necessary to
keep track of which blocks comprise that file
• Each block is assigned an address
• The location of a “file” is stored in what is called
a “File Allocation Table” (or FAT)
• When the hard disk is formatted, several
blocks are reserved so that the Operating System
can manage where files are stored on the disk
• FATs are often used to keep track of the filename
and directory as well.

12. Filesystems
• Files are managed within a “filesystem”
• The filesystem defines how and where files are
stored within a hard disk (or partition)
• Common filesystems include:
• FAT16 (MSDOS)
• VFAT (Windows 95)
• FAT32 (Windows 98)
• NTFS (Windows NT)
• UFS (UNIX)
• ext2/ext3 (Linux)
• ISO9660 (CD Roms)

13. Filesystems
• When a disk is formatted, a filesystem is placed
on the disk
• The filesystem reserves space for the FAT.
• The remaining space is available for files
• When a file is to be saved into the filesystem, the
system looks for the best location to save the file
• It is usually best to save the file in contiguous
blocks.
• If the disk is nearly full, it may not have
enough contiguous blocks to save the file. In
that case, the filesystem will place the file
wherever it can find space.

14. Deleting Files
• In order to make the delete operation faster,
when a file is deleted ONLY the FAT is updated.
• The actual data still remains on the disk
• This is why it MAY be possible to recover a file
which has been removed.
• The FAT is told that the blocks where the file was
stored are now available for writing
• The data will remain until another file is
stored in the same blocks.
• As more files are written on the disk, it is less
likely that a delete file can be recovered.

15. Hard Disk Fragmentation
• When files are deleted, their blocks are open for
writing.
• What if the next file which is written in the same
blocks is larger than the file which was originally
written there?
• The system has to break the file up into pieces
throughout the filesystem
• This is called fragmentation. It considerably slows
the access of files.
• Most modern Filesystems contain automatic
defragmentation utilities.

16. Hey! Wait a minute!
• When you purchase a hard disk, the manufacturer
indicates its capacity.
• When you format that hard disk, you’ll notice that
its capacity is less than what the manufacturer told
you.
• Formatting the disk requires space for the FAT
• Manufacturers use decimal numbers to
represent number of bytes
• 1GB = 1,000,000,000 bytes
• There is a class action suit currently filed
against the major disk manufacturers
because of this

17. Floppy Disks
• Floppy disks are similar to hard disks
• Because the medium is “floppy”, the disks cannot
operate at the same speeds as a hard disk.
• Floppy disks are older technology which haven’t
received a lot of attention since the late 1980s.
• Their capacity hasn’t increased much
• Many computers today do not even come with
floppy disk drives anymore.

18. Floppy Disk History
• The first floppy disks were 8 Inches in diameter
• The held about 256 K
• The next generation were 5.25 inches in diameter
• Could hold up to 1.44 MB
• The next generation were 3.5 inches in diameter
• These disks are held within a hard plastic case
• A spring loaded flap protects the disk from
dust and greasy fingers.
• Could hold up to 2.88 MB

19. Zip / Jaz Disks
• Similar to floppy disks
• They are removable
• Their platters are made of a hard material
• Can operate at higher speeds than floppies.
• Newer standards hold more data
• Most people have outgrown floppy disks

20. Optical Media
• Optical disks are very much like hard disks
• Hard disks store information using magnetic
material
• Bits are stored by changing the magnetic
properties of the magnetic material
• Bits are read by picking up the tiny magnetic
field with a read head
• Optical disks store information as pits in a
physical medium
• A laser is used to determine if a pit is present
or not.

21. CD ROM
• CD Roms use the same technology as audio
Compact Discs.
• A master disc is created.
• Copies of the disc are created through a
pressing process
• The discs are aluminum sandwiched between
plastic
• CDs are single sided.
Label
Acrylic
Aluminum
Plastic

22. CD-R
• CD Roms must be pressed. They are read only
• CDR discs can be written once and read many times
• CDRs are made out of aluminum and plastic, but
also contain a dye layer
• This dye is modified by a laser when the disc is
being written
• The laser heats up the dye and it becomes non-
reflective
Label
Acrylic
Aluminum
Plastic
Dye

23. Storing Information on a CD
• Because CDs were originally intended for audio
output, there is a single track of data which spirals
out from the center of the disc

24. CD-RW
• CD-RW is similar to CD-R
• The main difference is that the dye can be made
reflective again through an erase process
• In this way, CD-RW discs can be written many times
• Too much erasing, and the dye starts to fade.
Label
Acrylic
Aluminum
Plastic
Dye

25. DVD – Digital Versatile Disk
• DVDs hold approx 7 times the information that CDs
do in the same amount of storage space
• DVDs come in 3 types
• Single Sided/Single Layer (4.7 GB)
• Single Sided/Double Layer (8.5 GB)
• Double Sided/Double Layer (17 GB)
• DVD uses a laser with a shorter wavelength so the
pits are smaller
• More pits can be stored on a DVD
• Narrower track

26. DVD – Multiple Layers
• Each side of a DVD can contain 2 layers, doubling
the amount of data that can be stored
• One layer is semi-transparent. The laser can be
focused “through” that layer onto the second layer.
• If you took the track off of a single layer of a DVD
and stretched it out into a straight line, it would be
7.5 miles long!
• If you did the same with a double layer, double
sided disc, the track would stretch to over 30 miles!

27. DVD-R and DVD-RW
• These two technologies are still relatively new and
still fairly expensive.
• DVD-R and DVD-RW use similar techniques as CD-R
and CD-RW
• A dye layer is used for data writing
• The dye layer in DVD-RW is erasable