WATERGUARD S is a single pack colourless acrylic based waterproof coating which can be applied by brush or roller. Two coats of WATERGUARD S will ensure 80-100 micron film thickness. WATERGUARD S should be applied without any dilution. The product starts curing immediately on exposure to air due to the in-built catalyst and curing will completed within 24 hrs of application, WATERGUARD S gives a totally dry elastic film within 24 hrs. WATERGUARD S when used as recommended two coats to form an impermeable coating by blocking the capillaries and pores.

1. WATERGUARD S
AN EASILY BRUSH APPLIED SINGLE PACK
ACRYLIC BASED PENETRATING WATERPROOF COATING

2. Benefits
 Economical and easy to use
 Excellent adhesion
 Allows surface to breath
 Excellent waterproofing characteristics.
 Seals the porous surface and will not allow water to penetrate.
 Colourless coating.
 Flexible.
 Resists effloresence.
 Penetrates into the concrete and seals the surface.
 Long life.
 Resists ultra violet radiation.
 Prevent staining and ingress of dirt, grime, oil or grease, rust spotting,
pitting dusting and discolouration.

3. Uses
WATERGUARD S is used for all structures which are required to be
waterproofed and to be protected against the ingress of moisture like
basements, Lift Shafts, Swimming Pools, Sewage Tanks, Sunk slab,
Balconies, Terrace State, marble, paving, brick, quarry tiles, terrazzo and
exposed aggregate panels and paving etc.

4. Description
WATERGUARD S is a single pack colourless acrylic based waterproof
coating which can be applied by brush or roller. Two coats of
WATERGUARD S will ensure 80-100 micron film thickness.
WATERGUARD S should be applied without any dilution. The product
starts curing immediately on exposure to air due to the in-built catalyst and
curing will completed within 24 hrs of application, WATERGUARD S gives
a totally dry elastic film within 24 hrs. WATERGUARD S when used as
recommended two coats to form an impermeable coating by blocking the
capillaries and pores.

5. Properties
Appearance : Clear white Liquid
Viscosity @ 25 ºC Cps : 50 - 150
Sg. : 0.900 ± 0.005

6. Packing & Coverage
WATERGUARD S is supplied in 1, 5, 10, 20 Ltr. carboy. 1 ltr of
WATERGUARD S will cover 5-6 m²/per coat, (coverage depends on the
porosity of surface).

7. Packing & Coverage
WATERGUARD S is supplied in 1, 5, 10, 20 Ltr. carboy. 1 ltr of
WATERGUARD S will cover 5-6 m²/per coat, (coverage depends on the
porosity of surface).