Elmer Silang C.v

1. Curriculum Vitae of
ELMER T. SILANG
Email Address: Ilijan, Batangas City 4200 Philippines
Contact No.: +639667024326/+639217908631
Position Desired: Pipe Fitter
Job Objectives:
To obtain a challenging position that could utilize my educational qualifications,
capabilities and work related experiences to its full potential with the opportunity for growth
based on performance and to be a productive and efficient member of the company. To
contribute my abilities as well as to acquire knowledge and skills in order to help the company
achieves its goal.
Employment History:
Up to Present
Pipe Fitter
AG&P Ilijan LNG Import Facility Project
Job Description:
• Preparation of all equipment and materials before starting the job.
• Cooperation for tool box meeting everyday morning before deployment in individual
jobsite.
• Read and interpret piping and structural plan.
• Fit – up and alignment of pipes that roll to each connected fittings or rolling-offset.
• Follow and implement company safety procedures and perform housekeeping.
• Install of mechanical inter-locked valves and venti-lines.
• Fabricate spools and install pre-fabricated pipes and spools, perform Commissioning.
• Erection of different kinds of valves, like globe valves, and check valves, and ball valves.

2. Pipe Fitter
Philspec Construction Inc.
Pinamucan Ibaba, Batangas City, Batangas City 4200
May 21, 2016 – February 20, 2020
Job Description:
• Fit – up and alignment of pipes that roll to each connected fittings or rolling-offset.
• Install of all valves to each header, valves position defends on its isometric.
• Install of mechanical inter-locked valves and venti-lines.
• Interpret the valves position for its stem south, north, west or east, etc.
• Alignment of pipes using pipe clamp or jocked – bolts if over-lapes.
• Beveling using of grinders 4.5 inches up to 9 inches grinders.
Pipe Fitter
Gulf Sky Cranes & Cont. Co. Ltd. (GSCC)
Jubail Industrial City, Kingdom of Saudi Arabia
May 28, 2016 - June 13, 2018
Job Description:
• Preparation of all equipment and materials before starting the job.
• Cooperation for tool box meeting everyday morning before deployment in individual
module or pipe rock.
• Fit-up and alignment of different kinds of pipes and fittings based in isometric, GA or PS
& ID.
• Lay-outs of saddle tee, whether it is stub-in or stub-out.
• Alignment of pipes using of pipe clamp or jocked-bolts if over-lapes.
• Install of mechanical inter-locked valves and venti-lines.
• Fit – up and alignment of pipes that roll to each connected fittings or rolling-offset.
• Interpret lay-outs and drawings of piping plan and “GA” or general arrangement
Pipe Fitter
JEONGPOONG SAUDI LLC
Marafiq Yanbu II Power and Water Project
Hanwha Saudi Contractor P.O. Box 30144 Yanbu KSA.
May 14, 2013 – May 16, 2014
Job Description:
• Preparation of all equipment and materials before starting the job.

3. • Cooperation for tool box meeting everyday morning before deployment in individual
jobsite.
• Fit-up and alignment of different kinds of pipes and fittings based in isometric, GA or PS
& ID.
• Lay-outs of weldolet, threadolet and socket weld in pipes.
• Used of pipe fitters tools for fit-up and alignment jobs.
• Fit-up and alignment of “UMH” manholes or valve box in vessels, tanks and reactors, or
separators.
• Replacing of R.O. fist pass and 2nd
pass R.O membrane due to conductivity high.
• Fabricate of access, gang-ways, gratings and railings and outside of crude and oil storage
tanks and vessels.
• Fit-up and alignment of injection pipe-lines in underground and high elevated positions.
• Replacing of “LP” and “HP” R.O vessels for desalination operations.
• Fit-up and alignment of “G.R.E.” and G.R.P. pipes in underground in dual media filter
for desalination plant.
• Performing shutdown jobs in power plant and replacing of boiler tube that already
leakage.
• Erection and alignment of all valves and pipes in metering station from fuel oil unloading
jetty-flat-form.
• Alignment of pipes, pvc pipes and “G.R.E.” pipes for assembly of “Electro-
Cholorinationin for desalination.
• Erection and install of demi-water storage tanks in “BOP” for power plant make-up tank
supply for boiler.
• Alignment of chemical injection pumps from chemicals storage tanks for operation.
• Perform ship berthing operation, until it berths up to “JETTY” Plat-form fender.
• Fit-up and alignment of all isolation valves and panels in all plant until in power plant
and desalination.
• Perform shutdown jobs in power plant until it will start-up successfully and stable
generation.
• Erection of morring dolphins in “FOUJ” plat-form for ship berthing operation and
position.
• Alignment and laying of all “R.O.” vessels in first stage and 2nd
stage inside R.O. open
type building.
• Follow and implement company safety procedures and perform housekeeping.
Pipe Fitter
CONSOLIDATED CONTRACTORS INT’L CO.
Qatar RGX Project.
P.O. Box: 22056, Doha State of Qatar
December 16, 2006 – November 10, 2007
Job Description:

4. • Preparation of chain puller, fabrication of different kinds of fittings and pipes thouh the
use of pipe clamp, spirit level, steel square, pipe stand, cutting set, grinder steel tape, soft
stone, and wrap around gadgets.
• Spool controller, fit up any kind of pipe in underground and high elevations.
• Expediting of all cutting pipes from lay-down in a conveyor cutting area.
• Fit up and alignment of all brackets holding the high – elevated pipings.
• Fit up alignment of a manual cutting of epoxy coated pipes.
• Remove and replace valves and fittings, take field measurement for shop fabrication.
• Perform rerouting and revision jobs.
• Fabricate spools and install pre-fabricated pipes and spools, perform Commissioning.
• Perform all types of fabrication using small and big bore diameters pipes.
• Fabricate and install pipe rocks and columns.
• Fabricate pipe supports and hangers, cutting of different sizes of plates and beams as
required.
• Install valves and other fittings inside gas plant.
• Read and interpret piping and structural plan.
• Perform rectification jobs and repositioning of some valves.
• Trading of G.I. pipes of carbon steel pipes for deluge water and (AI) instrument airline.
• Install of valves base to the flow and pipe line directions.
• Install and erection of all “oil and gas injection pumps an injection pipe lines”.
• Follow and implement company safety procedures and perform housekeeping.
QAPCO Ethylene Plant Expansion
Project – EP 2- MESAIEED-Qatar
October 5, 2006 – December 10, 2006
Job Description:
• Preparation of chain puller, fabrication of different kinds of fittings and pipes thouh the
use of pipe clamp, spirit level, steel square, pipe stand, cutting set, grinder steel tape, soft
stone, and wrap around gadgets.
• Fit up and alignment of all brackets holding the high – elevated pipings.
• Fit up alignment of a manual cutting of epoxy coated pipes.
• Remove and replace valves and fittings, take field measurement for shop fabrication.
• Perform rerouting and revision jobs.
• Install valves and other fittings inside gas plant.
• Read and interpret piping and structural plan.
• Perform rectification jobs and repositioning of some valves.
• Follow and implement company safety procedures and perform housekeeping.
Pipe Fitter
J. Chavez

5. CONSTRUCTION & GENERAL SERVICES
Ilijan, Batangas City
August 6, 2003 – September 30, 2006
• Install and fabricates of all walk-ways outside of accumulators and separator.
• Read and interpret piping and structural plan.
• Perform maintenance job in all plant areas, also inside vessels and towers.
• Perform shutdown jobs and preventive maintenance or (PM)
• Erection of different kinds of valves, like globe valves, and check valves, and ball valves.
• Changing of troubled pipe lines such as carbon steel, chrome pipe, stainless steel and etc.
• Follow and implement company safety procedures and perform housekeeping.
Educational Background:
TESDA, Batangas City
Kumintang Ilaya, Alangilan Batangas City
General Electricity 1995
Pedro S. Tolentino Memorial National High School
Ilijan, Batangas City
Secondary March 1994
Ilijan Eleemntary School
Ilijan, Batangas City
Elementary March 1990
Personal Information:
Date of Birth : May 4, 1977
Place of Birth : Batangas City, Philippines
Sex : Male
Civil Status : Married
Nationality : Filipino
Height : 5’5”
Weight : 67 kg
Religion : Roman Catholic
Language : Tagalog & English
Father’s Name : Menrado Silang
Mother’s Name : Auria Silang
Passport No. : P9198229A
SSS No. : 0111-9562542-5
NBI No. : C662IRRO57-ND264569

6. Person to be contacted in case of emergency:
Desiree Silang
Mobile No.: +639217908631
Santolan, Batangas City
I hereby certify that the above information is true and correct to the best of my knowledge and beliefs,
ELMER T. SILANG
Applicant Signature