2. LTE Technology in summary
ïȘ Technology evolution
ï§ 3GPP evolution of the mobile networks
ï§ Technology based three pillars: Flat IP, OFDM, MIMO
ï§ To provide higher data throughput, higher capacity,
Low latency, at lower cost
3. LTE Specifications
ï§ Peak LTE throughput
âą Downlink : 173Mb/s 2x2 MIMO; 326Mb/s 4x4 MIMO for 20 MHz
âą Uplink: 86Mb/s SIMO
ï§ Spectrum efficiency
âą Downlink: 3-4 times HSDPA for MIMO (2,2)
âą Uplink: 2-3 times HSUPA for MIMO(1,2)
ï§ Ultra low latency : wired user experience
âą Call setup times : < 100ms
âą Round trip delay : 10ms from UE to server
ï§ Capacity
âą 200 users for 5MHz, 400 users in larger spectrum allocations (active state)
ï§ Mobility
âą LTE is optimized for low speeds 0-15km/h but mobility is maintained for speeds up
to 450km/h
âą Handover between 3G & LTE
ï§ Frequency Spectrum :
âą Scalable bandwidth : 1.4, 2.5, 5, 10, 15, 20MHz
âą To cover all frequencies of IMT-2000: 450 MHz to 2.5 GHz
6. Why LTE ?
ïȘ Improved Quality of Experience & New Services
ïȘ With LTE delivering even higher peak throughput and much
lower latency,
ïȘ mobile operators (either 3GPP or 3GPP2 based) have a unique
opportunity to evolve their existing infrastructure to next
generation wireless networks
ïȘ Deliver their subscriberâs Quality of Experience (QoE)
expectations in terms of real-time services such as Voice Over IP,
Multi-User Gaming Over IP, High Definition Video On Demand
and Live TV
ïȘ also continue to improve the quality of delivery for all legacy
applications (e-mail, internet browsing, MMS, etc.
7. LTE VS Wimax
In terms of technology, WiMAX and LTE are very similar
below are major differences
ïȘ Long Term Evolution (LTE) started out as a 3GPP project âfocused
on enhancing the Universal Terrestrial Radio Access (UTRA) and
optimizing 3GPPâs radio access architecture,â according to the 3GPP
website
ïȘ WiMAX evolved from a Wi-Fi, IP-based background. WiMAX went
through several stages of development, yet always used the IEEE
802.16 standard established by the IEEE Standards
ïȘ LTE is faster
ïȘ WiMAX has more ubiquity
8. LTE VS Wimax
ïȘ LTE is designed to be backwards compatible with GSM and HSPA. This
means that when a mobile device exceeds the range of an LTE network, it
can fall back on a 2.5 or 3G network assuming it has the requisite radio
technologies.
ïȘ WiMAX standard of 802.16e known as âMobile WiMAXâ is backwards
compatible with the previous WiMAX standard of 802.16d, known as âfixed
WiMAX.â
ïȘ LTE require the use of a SIM in order to operate. This will be convenient
for cellular devices that are already compatible with a SIM, but not for
laptops and other technological devices without SIM interfaces
ïȘ WiMAX does not require a SIM or any other hardware token. Therefore, all
authentication methods used to identify a customerâs device will be easily
entered into several devices
10. LTE Spectrum for Iraq (Option#1)
ïȘ IMT extension can be allocate for FDD LTE to meet
the requirement of High data rate and multimedia
services in Iraq