SlideShare ist ein Scribd-Unternehmen logo
1 von 10
ISOMETRIC PROJECTION
Part II

Prof.T.JEYAPOOVAN
Department of Mechanical Engineering
Hindustan Institute of Technology and Science
Chennai-603103, India
www.EGlive.in
Isometric Projection and
Isometric Scale
• Isometric projection is
always used for
combination of solids.
• To draw isometric
projection, isometric
dimensions are used which
is 0.82× True length.
• A conversion scale used for
converting true dimensions
into isometric dimensions is
shown in fig.

www.EGlive.in
Example1: Draw the isometric projection of a frustum of a cone of base
diameter 60 mm, top base diameter 35 mm and axis length 50 mm rests on
HP on its base.

• Draw TV and FV of the frustum of
cone using isometric scale.
• A square box of exact size is used
in TV to enclose the frustum and
construct the box in isometric.
• Use 4-centre method to draw
bottom base in isometric.
• Draw another square to enclose top
base of frustum in TV and locate it
in isometric as shown.
• Repeat the 4-centre method to
complete top base in isometric.
• Draw extreme generators and
darken visible portion of the solid
to complete isometric projection.

www.EGlive.in
Example 2: Draw the isometric projection of a hexagonal prism of side of
base 40 mm and height 60 mm with a right circular cone of base 40 mm
as diameter and altitude 50 mm, resting on its top such that the axes of
both solids are collinear.

• Draw the TV and FV of the prism
using isometric scale.
• A rectangular box of exact size is
used to enclose the prism.
• Construct the box in isometric.
• Measure the corners from TV and
mark them on the sides of the box.
• Repeat the procedure for cone but
construct it above the prism.
• Darken the top, left and right
edges of the prism and the visible
portion of the objects to complete
the isometric projection.
www.EGlive.in
Example 3: A square pyramid having a side of 50 mm base and 75 mm as
axis height stands centrally on circular block of 100 mm diameter and 50
mm thick. The base edges of the pyramid are parallel to VP. Draw the
isometric projection of the two objects.

• Draw the TV and FV of the
cylinder using isometric scale.
• A square box of exact size is
used to enclose the cylinder.
• Construct the box in isometric.
• Use 4-centre method to draw top
base in isometric and repeat the
same procedure for bottom base.
• Repeat the procedure for square
pyramid but construct it above
the cylinder.
• Darken the visible portion of the
cylinder and square pyramid to
complete isometric projection.
www.EGlive.in
Example 4: A sphere of diameter 40 mm rests centrally on top of a cube of
side 50 mm. Draw the isometric projection of the solids.

• Draw the TV and FV of the cube
using isometric scale.
• Construct the cube in isometric
which is of same size as the box.
• Note that isometric projection of a
sphere is a circle of true diameter.
• Mark the centre of the circle
above the top face of cube at a
height of 0.82 × radius. Then
draw the circle with this centre
with TRUE radius.
• Darken the circle and visible
portion of the cube to complete
isometric projection.
www.EGlive.in
Tips to draw Isometric Projection
• To draw isometric projection, the top and front views are
always drawn in isometric dimensions which will be used
to construct the isometric projection.
• Always isometric dimensions are used to draw the
isometric drawing of combination of solids involving
sphere or spherical shape.
• Isometric projection of a sphere is always a circle of TRUE
radius/diameter.
• In isometric projection, importance is given to the 3D
picture of the objects, so marking, dimensioning and
hidden lines may be omitted.
• Complete the isometric drawing by clearly drawing dark
lines for the visible portion of the objects.
www.EGlive.in
REFERENCE BOOKS
1. Jeyapoovan T, “Lesson Plans for Engineering
Graphics”, 2010, Vikas Publishing House Pvt
Ltd, New Delhi.
2. Jeyapoovan T, “Engineering Drawing and
Graphics”, 2011, Vikas Publishing House Pvt
Ltd, New Delhi.

www.EGlive.in
End of Lesson 12
Thank You

www.EGlive.in
End of Lesson 12
Thank You

www.EGlive.in

Weitere ähnliche Inhalte

Was ist angesagt?

Isometric circles 2
Isometric circles 2Isometric circles 2
Isometric circles 2teachmacao
 
Lesson 11 Isometric Projection - Part I
Lesson 11 Isometric Projection - Part ILesson 11 Isometric Projection - Part I
Lesson 11 Isometric Projection - Part IJeyapoovan Thangasamy
 
Lesson 4 Projections of Solids - Part I
Lesson 4 Projections of Solids - Part ILesson 4 Projections of Solids - Part I
Lesson 4 Projections of Solids - Part IJeyapoovan Thangasamy
 
Lesson 9 Development of surfaces - Part I
Lesson 9 Development of surfaces - Part ILesson 9 Development of surfaces - Part I
Lesson 9 Development of surfaces - Part IJeyapoovan Thangasamy
 
Chapter11 1
Chapter11 1Chapter11 1
Chapter11 1pandysp
 
Lesson 6 Projections of Solids - Part III
Lesson 6 Projections of Solids - Part IIILesson 6 Projections of Solids - Part III
Lesson 6 Projections of Solids - Part IIIJeyapoovan Thangasamy
 
Lesson 8 Section of Solids - Part II
Lesson 8 Section of Solids - Part IILesson 8 Section of Solids - Part II
Lesson 8 Section of Solids - Part IIJeyapoovan Thangasamy
 
Lesson 15 Freehand sketching - Orthographic projections - Part II
Lesson 15 Freehand sketching - Orthographic projections - Part IILesson 15 Freehand sketching - Orthographic projections - Part II
Lesson 15 Freehand sketching - Orthographic projections - Part IIJeyapoovan Thangasamy
 
Isometric drawing
Isometric drawingIsometric drawing
Isometric drawinghlalice
 
Lesson 7-sections-i
Lesson 7-sections-iLesson 7-sections-i
Lesson 7-sections-ieglive
 
Lesson 13-perspective-projection
Lesson 13-perspective-projectionLesson 13-perspective-projection
Lesson 13-perspective-projectioneglive
 
Isometric projections
Isometric projectionsIsometric projections
Isometric projectionssushma chinta
 
Engineering Drawing: Chapter 05 pictorial sketching
Engineering Drawing: Chapter 05 pictorial sketchingEngineering Drawing: Chapter 05 pictorial sketching
Engineering Drawing: Chapter 05 pictorial sketchingmokhtar
 
Isometric drawings
Isometric drawingsIsometric drawings
Isometric drawingsdean dundas
 
Lesson 10 Development of surfaces - Part II
Lesson 10 Development of surfaces - Part IILesson 10 Development of surfaces - Part II
Lesson 10 Development of surfaces - Part IIJeyapoovan Thangasamy
 
Steps in constructing an isometric drawing
Steps in constructing an isometric drawingSteps in constructing an isometric drawing
Steps in constructing an isometric drawingRodolfo Aquino
 

Was ist angesagt? (20)

Isometric circles 2
Isometric circles 2Isometric circles 2
Isometric circles 2
 
Lesson 11 Isometric Projection - Part I
Lesson 11 Isometric Projection - Part ILesson 11 Isometric Projection - Part I
Lesson 11 Isometric Projection - Part I
 
Lesson 13 Perspective projection
Lesson 13 Perspective projectionLesson 13 Perspective projection
Lesson 13 Perspective projection
 
Isometric
IsometricIsometric
Isometric
 
Lesson 4 Projections of Solids - Part I
Lesson 4 Projections of Solids - Part ILesson 4 Projections of Solids - Part I
Lesson 4 Projections of Solids - Part I
 
Lesson 9 Development of surfaces - Part I
Lesson 9 Development of surfaces - Part ILesson 9 Development of surfaces - Part I
Lesson 9 Development of surfaces - Part I
 
ISOMETRIC PPT
ISOMETRIC PPTISOMETRIC PPT
ISOMETRIC PPT
 
Chapter11 1
Chapter11 1Chapter11 1
Chapter11 1
 
Lesson 6 Projections of Solids - Part III
Lesson 6 Projections of Solids - Part IIILesson 6 Projections of Solids - Part III
Lesson 6 Projections of Solids - Part III
 
Lesson 8 Section of Solids - Part II
Lesson 8 Section of Solids - Part IILesson 8 Section of Solids - Part II
Lesson 8 Section of Solids - Part II
 
Lesson 15 Freehand sketching - Orthographic projections - Part II
Lesson 15 Freehand sketching - Orthographic projections - Part IILesson 15 Freehand sketching - Orthographic projections - Part II
Lesson 15 Freehand sketching - Orthographic projections - Part II
 
Isometric drawing
Isometric drawingIsometric drawing
Isometric drawing
 
Lesson 7-sections-i
Lesson 7-sections-iLesson 7-sections-i
Lesson 7-sections-i
 
Isometric
IsometricIsometric
Isometric
 
Lesson 13-perspective-projection
Lesson 13-perspective-projectionLesson 13-perspective-projection
Lesson 13-perspective-projection
 
Isometric projections
Isometric projectionsIsometric projections
Isometric projections
 
Engineering Drawing: Chapter 05 pictorial sketching
Engineering Drawing: Chapter 05 pictorial sketchingEngineering Drawing: Chapter 05 pictorial sketching
Engineering Drawing: Chapter 05 pictorial sketching
 
Isometric drawings
Isometric drawingsIsometric drawings
Isometric drawings
 
Lesson 10 Development of surfaces - Part II
Lesson 10 Development of surfaces - Part IILesson 10 Development of surfaces - Part II
Lesson 10 Development of surfaces - Part II
 
Steps in constructing an isometric drawing
Steps in constructing an isometric drawingSteps in constructing an isometric drawing
Steps in constructing an isometric drawing
 

Ähnlich wie Lesson 12-isometric-projections-ii

Class 10 presentation
Class 10 presentationClass 10 presentation
Class 10 presentationlaura_gerold
 
5.Isometric Projections Solutions.pdf
5.Isometric Projections Solutions.pdf5.Isometric Projections Solutions.pdf
5.Isometric Projections Solutions.pdfamareshgunda1404
 
Lesson 9-development-of-surfaces-i
Lesson 9-development-of-surfaces-iLesson 9-development-of-surfaces-i
Lesson 9-development-of-surfaces-ieglive
 
Isometric view of combination of solids: Cylinder resting centrally over Squa...
Isometric view of combination of solids: Cylinder resting centrally over Squa...Isometric view of combination of solids: Cylinder resting centrally over Squa...
Isometric view of combination of solids: Cylinder resting centrally over Squa...SUBIN B MARKOSE
 
Pictorial projection
Pictorial projectionPictorial projection
Pictorial projectionmusadoto
 
Lesson 8-sections-ii
Lesson 8-sections-iiLesson 8-sections-ii
Lesson 8-sections-iieglive
 
Lesson 4-solids-i
Lesson 4-solids-iLesson 4-solids-i
Lesson 4-solids-ieglive
 
Optical measuring instruments
Optical measuring instrumentsOptical measuring instruments
Optical measuring instrumentsnmahi96
 
Class 9 presentation
Class 9 presentationClass 9 presentation
Class 9 presentationlaura_gerold
 
Lesson 5-solids-ii
Lesson 5-solids-iiLesson 5-solids-ii
Lesson 5-solids-iieglive
 
Lesson 5 Projections of Solids - Part II
Lesson 5 Projections of Solids - Part IILesson 5 Projections of Solids - Part II
Lesson 5 Projections of Solids - Part IIJeyapoovan Thangasamy
 
Isometric projection of frustum of cone
Isometric projection of frustum of coneIsometric projection of frustum of cone
Isometric projection of frustum of coneSUBIN B MARKOSE
 
STRAND 4 GEOMETRY.pptx CBC GRADE 8 FOR KIDS
STRAND 4 GEOMETRY.pptx CBC GRADE 8 FOR KIDSSTRAND 4 GEOMETRY.pptx CBC GRADE 8 FOR KIDS
STRAND 4 GEOMETRY.pptx CBC GRADE 8 FOR KIDSkimdan468
 
Lesson 6-solids-iii
Lesson 6-solids-iiiLesson 6-solids-iii
Lesson 6-solids-iiieglive
 
17e9fae40ba719b1d764783c5fee5a7534d6da3ffeb29cde64ee5b89d176d7f1_L6-Isometric...
17e9fae40ba719b1d764783c5fee5a7534d6da3ffeb29cde64ee5b89d176d7f1_L6-Isometric...17e9fae40ba719b1d764783c5fee5a7534d6da3ffeb29cde64ee5b89d176d7f1_L6-Isometric...
17e9fae40ba719b1d764783c5fee5a7534d6da3ffeb29cde64ee5b89d176d7f1_L6-Isometric...naman771416
 
Lesson 10-development-of-surfaces-ii
Lesson 10-development-of-surfaces-iiLesson 10-development-of-surfaces-ii
Lesson 10-development-of-surfaces-iieglive
 
Level 7 Mathematics – Measurement and Geometry
Level 7 Mathematics – Measurement and GeometryLevel 7 Mathematics – Measurement and Geometry
Level 7 Mathematics – Measurement and GeometryHawkesdale P12 College
 

Ähnlich wie Lesson 12-isometric-projections-ii (20)

Class 10 presentation
Class 10 presentationClass 10 presentation
Class 10 presentation
 
5.Isometric Projections Solutions.pdf
5.Isometric Projections Solutions.pdf5.Isometric Projections Solutions.pdf
5.Isometric Projections Solutions.pdf
 
Lesson 9-development-of-surfaces-i
Lesson 9-development-of-surfaces-iLesson 9-development-of-surfaces-i
Lesson 9-development-of-surfaces-i
 
Isometric view of combination of solids: Cylinder resting centrally over Squa...
Isometric view of combination of solids: Cylinder resting centrally over Squa...Isometric view of combination of solids: Cylinder resting centrally over Squa...
Isometric view of combination of solids: Cylinder resting centrally over Squa...
 
Pictorial projection
Pictorial projectionPictorial projection
Pictorial projection
 
Lesson 8-sections-ii
Lesson 8-sections-iiLesson 8-sections-ii
Lesson 8-sections-ii
 
Lesson 4-solids-i
Lesson 4-solids-iLesson 4-solids-i
Lesson 4-solids-i
 
Optical measuring instruments
Optical measuring instrumentsOptical measuring instruments
Optical measuring instruments
 
Class 9 presentation
Class 9 presentationClass 9 presentation
Class 9 presentation
 
Lesson 5-solids-ii
Lesson 5-solids-iiLesson 5-solids-ii
Lesson 5-solids-ii
 
Lesson 5 Projections of Solids - Part II
Lesson 5 Projections of Solids - Part IILesson 5 Projections of Solids - Part II
Lesson 5 Projections of Solids - Part II
 
Isometric projection of frustum of cone
Isometric projection of frustum of coneIsometric projection of frustum of cone
Isometric projection of frustum of cone
 
STRAND 4 GEOMETRY.pptx CBC GRADE 8 FOR KIDS
STRAND 4 GEOMETRY.pptx CBC GRADE 8 FOR KIDSSTRAND 4 GEOMETRY.pptx CBC GRADE 8 FOR KIDS
STRAND 4 GEOMETRY.pptx CBC GRADE 8 FOR KIDS
 
Presentation1 of eg
Presentation1  of  egPresentation1  of  eg
Presentation1 of eg
 
Lesson 6-solids-iii
Lesson 6-solids-iiiLesson 6-solids-iii
Lesson 6-solids-iii
 
17e9fae40ba719b1d764783c5fee5a7534d6da3ffeb29cde64ee5b89d176d7f1_L6-Isometric...
17e9fae40ba719b1d764783c5fee5a7534d6da3ffeb29cde64ee5b89d176d7f1_L6-Isometric...17e9fae40ba719b1d764783c5fee5a7534d6da3ffeb29cde64ee5b89d176d7f1_L6-Isometric...
17e9fae40ba719b1d764783c5fee5a7534d6da3ffeb29cde64ee5b89d176d7f1_L6-Isometric...
 
Lesson 10-development-of-surfaces-ii
Lesson 10-development-of-surfaces-iiLesson 10-development-of-surfaces-ii
Lesson 10-development-of-surfaces-ii
 
Lesson 7 Section of Solids - Part I
Lesson 7 Section of Solids - Part ILesson 7 Section of Solids - Part I
Lesson 7 Section of Solids - Part I
 
Level 7 Mathematics – Measurement and Geometry
Level 7 Mathematics – Measurement and GeometryLevel 7 Mathematics – Measurement and Geometry
Level 7 Mathematics – Measurement and Geometry
 
SolidWorks mini guide
SolidWorks mini guideSolidWorks mini guide
SolidWorks mini guide
 

Mehr von eglive

Lesson 14-freehand-sketching-i
Lesson 14-freehand-sketching-iLesson 14-freehand-sketching-i
Lesson 14-freehand-sketching-ieglive
 
Lesson 3-planes
Lesson 3-planesLesson 3-planes
Lesson 3-planeseglive
 
Lesson 3-planes
Lesson 3-planesLesson 3-planes
Lesson 3-planeseglive
 
Lesson 2-lines-ii
Lesson 2-lines-iiLesson 2-lines-ii
Lesson 2-lines-iieglive
 
New lesson 1 points and lines - i
New   lesson 1 points and lines - iNew   lesson 1 points and lines - i
New lesson 1 points and lines - ieglive
 
Lesson 1-points-and-lines-i (1)
Lesson 1-points-and-lines-i (1)Lesson 1-points-and-lines-i (1)
Lesson 1-points-and-lines-i (1)eglive
 
Lesson 1-points-and-lines-i (1)
Lesson 1-points-and-lines-i (1)Lesson 1-points-and-lines-i (1)
Lesson 1-points-and-lines-i (1)eglive
 

Mehr von eglive (7)

Lesson 14-freehand-sketching-i
Lesson 14-freehand-sketching-iLesson 14-freehand-sketching-i
Lesson 14-freehand-sketching-i
 
Lesson 3-planes
Lesson 3-planesLesson 3-planes
Lesson 3-planes
 
Lesson 3-planes
Lesson 3-planesLesson 3-planes
Lesson 3-planes
 
Lesson 2-lines-ii
Lesson 2-lines-iiLesson 2-lines-ii
Lesson 2-lines-ii
 
New lesson 1 points and lines - i
New   lesson 1 points and lines - iNew   lesson 1 points and lines - i
New lesson 1 points and lines - i
 
Lesson 1-points-and-lines-i (1)
Lesson 1-points-and-lines-i (1)Lesson 1-points-and-lines-i (1)
Lesson 1-points-and-lines-i (1)
 
Lesson 1-points-and-lines-i (1)
Lesson 1-points-and-lines-i (1)Lesson 1-points-and-lines-i (1)
Lesson 1-points-and-lines-i (1)
 

Kürzlich hochgeladen

Apidays Singapore 2024 - Building Digital Trust in a Digital Economy by Veron...
Apidays Singapore 2024 - Building Digital Trust in a Digital Economy by Veron...Apidays Singapore 2024 - Building Digital Trust in a Digital Economy by Veron...
Apidays Singapore 2024 - Building Digital Trust in a Digital Economy by Veron...apidays
 
EIS-Webinar-Prompt-Knowledge-Eng-2024-04-08.pptx
EIS-Webinar-Prompt-Knowledge-Eng-2024-04-08.pptxEIS-Webinar-Prompt-Knowledge-Eng-2024-04-08.pptx
EIS-Webinar-Prompt-Knowledge-Eng-2024-04-08.pptxEarley Information Science
 
Boost PC performance: How more available memory can improve productivity
Boost PC performance: How more available memory can improve productivityBoost PC performance: How more available memory can improve productivity
Boost PC performance: How more available memory can improve productivityPrincipled Technologies
 
How to convert PDF to text with Nanonets
How to convert PDF to text with NanonetsHow to convert PDF to text with Nanonets
How to convert PDF to text with Nanonetsnaman860154
 
Presentation on how to chat with PDF using ChatGPT code interpreter
Presentation on how to chat with PDF using ChatGPT code interpreterPresentation on how to chat with PDF using ChatGPT code interpreter
Presentation on how to chat with PDF using ChatGPT code interpreternaman860154
 
GenAI Risks & Security Meetup 01052024.pdf
GenAI Risks & Security Meetup 01052024.pdfGenAI Risks & Security Meetup 01052024.pdf
GenAI Risks & Security Meetup 01052024.pdflior mazor
 
08448380779 Call Girls In Friends Colony Women Seeking Men
08448380779 Call Girls In Friends Colony Women Seeking Men08448380779 Call Girls In Friends Colony Women Seeking Men
08448380779 Call Girls In Friends Colony Women Seeking MenDelhi Call girls
 
Data Cloud, More than a CDP by Matt Robison
Data Cloud, More than a CDP by Matt RobisonData Cloud, More than a CDP by Matt Robison
Data Cloud, More than a CDP by Matt RobisonAnna Loughnan Colquhoun
 
2024: Domino Containers - The Next Step. News from the Domino Container commu...
2024: Domino Containers - The Next Step. News from the Domino Container commu...2024: Domino Containers - The Next Step. News from the Domino Container commu...
2024: Domino Containers - The Next Step. News from the Domino Container commu...Martijn de Jong
 
04-2024-HHUG-Sales-and-Marketing-Alignment.pptx
04-2024-HHUG-Sales-and-Marketing-Alignment.pptx04-2024-HHUG-Sales-and-Marketing-Alignment.pptx
04-2024-HHUG-Sales-and-Marketing-Alignment.pptxHampshireHUG
 
08448380779 Call Girls In Civil Lines Women Seeking Men
08448380779 Call Girls In Civil Lines Women Seeking Men08448380779 Call Girls In Civil Lines Women Seeking Men
08448380779 Call Girls In Civil Lines Women Seeking MenDelhi Call girls
 
What Are The Drone Anti-jamming Systems Technology?
What Are The Drone Anti-jamming Systems Technology?What Are The Drone Anti-jamming Systems Technology?
What Are The Drone Anti-jamming Systems Technology?Antenna Manufacturer Coco
 
Strategies for Unlocking Knowledge Management in Microsoft 365 in the Copilot...
Strategies for Unlocking Knowledge Management in Microsoft 365 in the Copilot...Strategies for Unlocking Knowledge Management in Microsoft 365 in the Copilot...
Strategies for Unlocking Knowledge Management in Microsoft 365 in the Copilot...Drew Madelung
 
Raspberry Pi 5: Challenges and Solutions in Bringing up an OpenGL/Vulkan Driv...
Raspberry Pi 5: Challenges and Solutions in Bringing up an OpenGL/Vulkan Driv...Raspberry Pi 5: Challenges and Solutions in Bringing up an OpenGL/Vulkan Driv...
Raspberry Pi 5: Challenges and Solutions in Bringing up an OpenGL/Vulkan Driv...Igalia
 
The Role of Taxonomy and Ontology in Semantic Layers - Heather Hedden.pdf
The Role of Taxonomy and Ontology in Semantic Layers - Heather Hedden.pdfThe Role of Taxonomy and Ontology in Semantic Layers - Heather Hedden.pdf
The Role of Taxonomy and Ontology in Semantic Layers - Heather Hedden.pdfEnterprise Knowledge
 
Axa Assurance Maroc - Insurer Innovation Award 2024
Axa Assurance Maroc - Insurer Innovation Award 2024Axa Assurance Maroc - Insurer Innovation Award 2024
Axa Assurance Maroc - Insurer Innovation Award 2024The Digital Insurer
 
The 7 Things I Know About Cyber Security After 25 Years | April 2024
The 7 Things I Know About Cyber Security After 25 Years | April 2024The 7 Things I Know About Cyber Security After 25 Years | April 2024
The 7 Things I Know About Cyber Security After 25 Years | April 2024Rafal Los
 
CNv6 Instructor Chapter 6 Quality of Service
CNv6 Instructor Chapter 6 Quality of ServiceCNv6 Instructor Chapter 6 Quality of Service
CNv6 Instructor Chapter 6 Quality of Servicegiselly40
 
Handwritten Text Recognition for manuscripts and early printed texts
Handwritten Text Recognition for manuscripts and early printed textsHandwritten Text Recognition for manuscripts and early printed texts
Handwritten Text Recognition for manuscripts and early printed textsMaria Levchenko
 
ProductAnonymous-April2024-WinProductDiscovery-MelissaKlemke
ProductAnonymous-April2024-WinProductDiscovery-MelissaKlemkeProductAnonymous-April2024-WinProductDiscovery-MelissaKlemke
ProductAnonymous-April2024-WinProductDiscovery-MelissaKlemkeProduct Anonymous
 

Kürzlich hochgeladen (20)

Apidays Singapore 2024 - Building Digital Trust in a Digital Economy by Veron...
Apidays Singapore 2024 - Building Digital Trust in a Digital Economy by Veron...Apidays Singapore 2024 - Building Digital Trust in a Digital Economy by Veron...
Apidays Singapore 2024 - Building Digital Trust in a Digital Economy by Veron...
 
EIS-Webinar-Prompt-Knowledge-Eng-2024-04-08.pptx
EIS-Webinar-Prompt-Knowledge-Eng-2024-04-08.pptxEIS-Webinar-Prompt-Knowledge-Eng-2024-04-08.pptx
EIS-Webinar-Prompt-Knowledge-Eng-2024-04-08.pptx
 
Boost PC performance: How more available memory can improve productivity
Boost PC performance: How more available memory can improve productivityBoost PC performance: How more available memory can improve productivity
Boost PC performance: How more available memory can improve productivity
 
How to convert PDF to text with Nanonets
How to convert PDF to text with NanonetsHow to convert PDF to text with Nanonets
How to convert PDF to text with Nanonets
 
Presentation on how to chat with PDF using ChatGPT code interpreter
Presentation on how to chat with PDF using ChatGPT code interpreterPresentation on how to chat with PDF using ChatGPT code interpreter
Presentation on how to chat with PDF using ChatGPT code interpreter
 
GenAI Risks & Security Meetup 01052024.pdf
GenAI Risks & Security Meetup 01052024.pdfGenAI Risks & Security Meetup 01052024.pdf
GenAI Risks & Security Meetup 01052024.pdf
 
08448380779 Call Girls In Friends Colony Women Seeking Men
08448380779 Call Girls In Friends Colony Women Seeking Men08448380779 Call Girls In Friends Colony Women Seeking Men
08448380779 Call Girls In Friends Colony Women Seeking Men
 
Data Cloud, More than a CDP by Matt Robison
Data Cloud, More than a CDP by Matt RobisonData Cloud, More than a CDP by Matt Robison
Data Cloud, More than a CDP by Matt Robison
 
2024: Domino Containers - The Next Step. News from the Domino Container commu...
2024: Domino Containers - The Next Step. News from the Domino Container commu...2024: Domino Containers - The Next Step. News from the Domino Container commu...
2024: Domino Containers - The Next Step. News from the Domino Container commu...
 
04-2024-HHUG-Sales-and-Marketing-Alignment.pptx
04-2024-HHUG-Sales-and-Marketing-Alignment.pptx04-2024-HHUG-Sales-and-Marketing-Alignment.pptx
04-2024-HHUG-Sales-and-Marketing-Alignment.pptx
 
08448380779 Call Girls In Civil Lines Women Seeking Men
08448380779 Call Girls In Civil Lines Women Seeking Men08448380779 Call Girls In Civil Lines Women Seeking Men
08448380779 Call Girls In Civil Lines Women Seeking Men
 
What Are The Drone Anti-jamming Systems Technology?
What Are The Drone Anti-jamming Systems Technology?What Are The Drone Anti-jamming Systems Technology?
What Are The Drone Anti-jamming Systems Technology?
 
Strategies for Unlocking Knowledge Management in Microsoft 365 in the Copilot...
Strategies for Unlocking Knowledge Management in Microsoft 365 in the Copilot...Strategies for Unlocking Knowledge Management in Microsoft 365 in the Copilot...
Strategies for Unlocking Knowledge Management in Microsoft 365 in the Copilot...
 
Raspberry Pi 5: Challenges and Solutions in Bringing up an OpenGL/Vulkan Driv...
Raspberry Pi 5: Challenges and Solutions in Bringing up an OpenGL/Vulkan Driv...Raspberry Pi 5: Challenges and Solutions in Bringing up an OpenGL/Vulkan Driv...
Raspberry Pi 5: Challenges and Solutions in Bringing up an OpenGL/Vulkan Driv...
 
The Role of Taxonomy and Ontology in Semantic Layers - Heather Hedden.pdf
The Role of Taxonomy and Ontology in Semantic Layers - Heather Hedden.pdfThe Role of Taxonomy and Ontology in Semantic Layers - Heather Hedden.pdf
The Role of Taxonomy and Ontology in Semantic Layers - Heather Hedden.pdf
 
Axa Assurance Maroc - Insurer Innovation Award 2024
Axa Assurance Maroc - Insurer Innovation Award 2024Axa Assurance Maroc - Insurer Innovation Award 2024
Axa Assurance Maroc - Insurer Innovation Award 2024
 
The 7 Things I Know About Cyber Security After 25 Years | April 2024
The 7 Things I Know About Cyber Security After 25 Years | April 2024The 7 Things I Know About Cyber Security After 25 Years | April 2024
The 7 Things I Know About Cyber Security After 25 Years | April 2024
 
CNv6 Instructor Chapter 6 Quality of Service
CNv6 Instructor Chapter 6 Quality of ServiceCNv6 Instructor Chapter 6 Quality of Service
CNv6 Instructor Chapter 6 Quality of Service
 
Handwritten Text Recognition for manuscripts and early printed texts
Handwritten Text Recognition for manuscripts and early printed textsHandwritten Text Recognition for manuscripts and early printed texts
Handwritten Text Recognition for manuscripts and early printed texts
 
ProductAnonymous-April2024-WinProductDiscovery-MelissaKlemke
ProductAnonymous-April2024-WinProductDiscovery-MelissaKlemkeProductAnonymous-April2024-WinProductDiscovery-MelissaKlemke
ProductAnonymous-April2024-WinProductDiscovery-MelissaKlemke
 

Lesson 12-isometric-projections-ii

  • 1. ISOMETRIC PROJECTION Part II Prof.T.JEYAPOOVAN Department of Mechanical Engineering Hindustan Institute of Technology and Science Chennai-603103, India www.EGlive.in
  • 2. Isometric Projection and Isometric Scale • Isometric projection is always used for combination of solids. • To draw isometric projection, isometric dimensions are used which is 0.82× True length. • A conversion scale used for converting true dimensions into isometric dimensions is shown in fig. www.EGlive.in
  • 3. Example1: Draw the isometric projection of a frustum of a cone of base diameter 60 mm, top base diameter 35 mm and axis length 50 mm rests on HP on its base. • Draw TV and FV of the frustum of cone using isometric scale. • A square box of exact size is used in TV to enclose the frustum and construct the box in isometric. • Use 4-centre method to draw bottom base in isometric. • Draw another square to enclose top base of frustum in TV and locate it in isometric as shown. • Repeat the 4-centre method to complete top base in isometric. • Draw extreme generators and darken visible portion of the solid to complete isometric projection. www.EGlive.in
  • 4. Example 2: Draw the isometric projection of a hexagonal prism of side of base 40 mm and height 60 mm with a right circular cone of base 40 mm as diameter and altitude 50 mm, resting on its top such that the axes of both solids are collinear. • Draw the TV and FV of the prism using isometric scale. • A rectangular box of exact size is used to enclose the prism. • Construct the box in isometric. • Measure the corners from TV and mark them on the sides of the box. • Repeat the procedure for cone but construct it above the prism. • Darken the top, left and right edges of the prism and the visible portion of the objects to complete the isometric projection. www.EGlive.in
  • 5. Example 3: A square pyramid having a side of 50 mm base and 75 mm as axis height stands centrally on circular block of 100 mm diameter and 50 mm thick. The base edges of the pyramid are parallel to VP. Draw the isometric projection of the two objects. • Draw the TV and FV of the cylinder using isometric scale. • A square box of exact size is used to enclose the cylinder. • Construct the box in isometric. • Use 4-centre method to draw top base in isometric and repeat the same procedure for bottom base. • Repeat the procedure for square pyramid but construct it above the cylinder. • Darken the visible portion of the cylinder and square pyramid to complete isometric projection. www.EGlive.in
  • 6. Example 4: A sphere of diameter 40 mm rests centrally on top of a cube of side 50 mm. Draw the isometric projection of the solids. • Draw the TV and FV of the cube using isometric scale. • Construct the cube in isometric which is of same size as the box. • Note that isometric projection of a sphere is a circle of true diameter. • Mark the centre of the circle above the top face of cube at a height of 0.82 × radius. Then draw the circle with this centre with TRUE radius. • Darken the circle and visible portion of the cube to complete isometric projection. www.EGlive.in
  • 7. Tips to draw Isometric Projection • To draw isometric projection, the top and front views are always drawn in isometric dimensions which will be used to construct the isometric projection. • Always isometric dimensions are used to draw the isometric drawing of combination of solids involving sphere or spherical shape. • Isometric projection of a sphere is always a circle of TRUE radius/diameter. • In isometric projection, importance is given to the 3D picture of the objects, so marking, dimensioning and hidden lines may be omitted. • Complete the isometric drawing by clearly drawing dark lines for the visible portion of the objects. www.EGlive.in
  • 8. REFERENCE BOOKS 1. Jeyapoovan T, “Lesson Plans for Engineering Graphics”, 2010, Vikas Publishing House Pvt Ltd, New Delhi. 2. Jeyapoovan T, “Engineering Drawing and Graphics”, 2011, Vikas Publishing House Pvt Ltd, New Delhi. www.EGlive.in
  • 9. End of Lesson 12 Thank You www.EGlive.in
  • 10. End of Lesson 12 Thank You www.EGlive.in