The brake wheel cylinder is a hydraulic component that presses the brake shoes against the brake drum. When you experience a spongy brake pedal and poor brake performance, consult with a mechanic. Take quick action to control brake fluid leaks. The following slideshow will describe the symptoms of a failing wheel cylinder in Land Rover.

1. Symptoms of
a Failing
Brake Wheel
Cylinder in
Land Rover

2. The brake wheel cylinders are an
important component assembled
along with the modern drum brake
systems in your Land Rover.

3. It is located in each wheel and is
usually positioned at the top of the
wheel, above the shoes.

4. They are the hydraulic component that
extends to press the brake shoes
against the brake drum when the pedal
is pressed.

5. Symptoms of a failing
brake wheel cylinder

6. As the brake wheel cylinders are a
part of the braking system, they are
important to the overall safety of the
Land Rover.

7. Here are some of the commonly
found symptoms of a failing brake
wheel cylinder in a Land Rover.

8. Spongy brake
pedal

9. When the brake wheel cylinder starts to
malfunction, then one of the first
symptoms commonly associated with it is
a spongy brake pedal.

10. The pedals ability to pressurize and
extend the piston gets compromised
when the wheel cylinders develop any
sort of internal or external leaks.

11. Poor brake performance

12. A bad wheel cylinder affects the
pressure exerted on the braking system
and reduces the system's ability to slow
the car.

13. In case of heavy braking circumstances,
the car with poor braking performance
is harder to stop.

14. Brake fluid leaks

15. The seals associated with the brake
wheel cylinders wear out and allows the
brake fluid to leak out of the system.

16. The brake fluid leaks down on the drum and
brake shoes, damaging the friction between
them and diminishing the stopping power.

17. Causes of a
damaged brake
wheel cylinder

18. The brake wheel cylinders pistons have
internal seals that can often leak over
time, resulting in a loss of brake fluid.

19. This is usually caused by corrosion or
pitting on the brake cylinder walls,
which causes the brake cylinder piston
seals to wear over time.

20. Corrosion or pitting of the brake cylinder
walls can be caused by small amounts of
water moisture in the brake fluid.

21. Proper maintenance of
the brake wheel cylinder

22. The brake wheel cylinders do not
need any special servicing and
maintenance in order to have the
vehicle retain its performance value.

23. To get the best braking response,
always change the brake fluid in
time in your Land Rover.

24. Visit Us
https://www.dreamcarsautorepair.com/