If you are a Jet Ski owner and are tired of having to use antifouling paint or remove the Jet Ski from the water every time you use it, the answer is to use a Jet Ski dock on the Gold Coast.

1. Finding a Good Jet Ski Dock on the Gold Coast
If you are a Jet Ski owner and are tired of having to use antifouling paint or remove the Jet
Ski from the water every time you use it, the answer is to use a Jet Ski dock on the Gold
Coast.
One of the many common solutions is to use a lift, which holds the personal watercraft high
up in the area. The problem with these is that they can obstruct the view of your water area
and many local councils and marinas do not allow their use in public places. Jet Ski lifts can
also damage the vehicle as all of the weight rests on only two small strips. Because of the
higher centre of gravity, the Jet Ski and lift are more likely to topple over in a storm. Luckily,
there is another antifouling alternative on the market.
FloatBricks
For vehicles less than 6 metres in length and 1300 kilograms in weight, FloatBricks are a
fantastic way to keep your PWC (personal watercraft) dry without the need of a lift. There
are many sizes of docks available that suit a range of different PWC models and needs. The
Jet Ski would have a much lower centre of gravity with a floating dock and offer a berth that
is near water level, while keeping it away from the water. It is simple to use and you simply
manoeuvre the PWC onto the bricks and reverse it off them.
If you have a small space in which to keep the Jet Ski, the Space Save V-350 is only 3.5
metres long and 1.5 metres wide. You will find that it is the same size as most other PWC
docking systems. If you have more space, the Walkaround U-350 is 2 metres wide and
allows you to have more space in order to get on the Jet Ski comfortably.