NEW SolidWorks® Plastics
Injection molding simulation for designers of plastic parts and injection molds. Evaluate the manufacturability of parts and molds while designing for form, fit, and function.
For Plastic Part Designers
Part designers get rapid feedback on how modifications to wall thickness, gate locations, materials, or geometry can affect the manufacturing of their part
For Mold Designers
Quickly create and analyze single, multi-cavity, and family mold layouts, including sprues, runners, and gates.
Getting the Right Results
The Results Adviser provides practical design advice and troubleshooting tips to help diagnose and solve potential problems.
2. SolidWorks Plastics SolidWorks Plastics
Feature
Professional Premium
ADVANCED ANALYSIS
Gas-Assist ▪
Fiber Analysis ▪
Reaction Injection Molding (RIM) ▪
Birefringence ▪
Valve Gates (sequential injection) ▪
RESULTS
Fill Time ▪ ▪
Pressure at End of Fill ▪ ▪
Temperature at End of Fill ▪ ▪
Flow Front Temperature ▪ ▪
Shear Stress ▪ ▪
Frozen Layer Fraction at End of Fill ▪ ▪
Cooling Time ▪ ▪
Ease of Fill ▪ ▪
Velocity Vectors ▪ ▪
Weld Lines ▪ ▪
Air Traps ▪ ▪
Sink Marks ▪ ▪
X-Y Plots ▪ ▪
Clamp Force ▪ ▪
Cycle Time ▪ ▪
Dynamic Results Adviser ▪ ▪
Results Adviser Help ▪ ▪
Central Temperature at End of Fill ▪
Average Temperature at End of Fill ▪
Shear Rate ▪
Volumetric Shrinkage ▪
Temperature at End of Cooling ▪
REPORT GENERATION
Microsoft® Word ▪ ▪
Microsoft® PowerPoint ▪ ▪
HTML ▪ ▪