1. CURRICULUM VITAE
SATHISH KUMAR
#14-74,blk 9G ,Yuan ching road, lakeside tower ,Singapore ,
Phone: +65-85102456
Passport no : J3595823
Fin no: G5399684T
Email: sathishprc@gmail.com
OBJECTIVE: To work in a competitive and progressive environment in order to flourish my skills, abilities and vision
to become a Highly Professional Team Leader.
EDUCATION
• Bachelor degree in Electronic & Instrumentation Engineer
Anna University, Mookambigai College of Engineer, Graduated 2008-2011
• Diploma in Instrumentation & control Engineer
Board of technical Education, Srinivasa Polytechnic College, Graduated 2005-2008
SKILLS:
Interaction with client & engineer to resolve various issues related to QA/QC aspects.
Familiar with ISO 9001 Quality Management System requirements
Trained in Quality Issues, Equipment and Technology related fields
Wide knowledge of current International, National & QP Standards and Procedures
Ability to work within a multi-disciplinary team to achieve successful installation and Commissioning of
Infrastructure projects
Hands on Experience with commissioning activities
Strong Documentation skills.
Competent computer skills in Microsoft Office products.
Excellent hands hold skills of Process automation system F&G system, Communication System (PBX,
CCTV, Intercom, and Telephone), Process Instrument calibration, maintenance, commissioning and
Installation.
Good communication negotiation and inter-personal skills.
Ability to read P&ID’S, Electrical single line and Schematic diagrams, Relay Logic and Ladder diagrams,
Instrument loop drawings..
Ability to manage, handle and supervise a team of skilled work force.
Due to excellent professional skills, decision power and confidence, I have ability to minimize the problems,
convince our clients, achieve targets and troubleshoot the faults.
TRAINING & COURSES
Comp Ex JTL (Hazardous Area Equipment Inspection Certificate) in Singapore. Certificate no: 53014
BOSIET (Basic offshore safety induction & emergency training with huet and EBS).
OPITO, MSTS Falck , Singapore. Certificate no: 088244
PROGRAMMABLE LOGIC CONTROLLER (PLC)
o Allen Bradley : Micro Logic 1200 series C, Software RS logic 5000.
o Omron : Sysmac CPM 2A, software CX programmer , Version 9.3
PLANT DESIGN MANAGEMENT SYSTEM (PDMS) 3D CAD Industry version 12.1
VARIABLE FREQUENCY DRIVES (VFD)
o Selection of VFD based on load and application.VFD wiring to Load. Parameter selection of VFD.
Programming and Commissioning (ABB ACS 800 Series).
Certified in OMRON Training organizes by ITE IN SINGAPORE
Advance Diploma in Industrial Automation
Diploma in Electrical CADD
Certified in WIRLESS SENSOR NET WORKS by NATIONAL INSTITUTE OF TECHNOLOGY (NIT)
1 of 6
2. TIRUCHIRAPALLI TAMILNADU S.INDIA
TECHNICAL KNOWLEDGE :
Electrical works:
AC, DC Motors All types including HT, MV, LT
Switch gear, breakers, MCC's
UPS system
Plant lighting, building lighting, Street lighting, Emergency lighting system.
Plant Electrical Grounding / Earthling system
Load shedding scheme and logic
Instrumentation & Communication works:
Distributed Control System: Yamatek Honeywell-TDC 3000, Yokogawa-Centum CS3000.
ESD System: PLC & Relay logic based ESD systems, AB.
Fire & Gas and Smoke detection System: General Monitor
Burner Management System: Pneumatic and PLC based burner management system for boilers and
Furness
Filed Instrumentation: All types of Flow, Level, Temperature, Pressure Instruments including control valves
and Gas Analyzers/Chromatographs.
Communication System: CCTV, Intercom system, PABX
Worked on the following Industrial Standards:
National Electric Code (NEC)
Underwriters Laboratories Standards
National Electrical Manufacturers Association Standard
National Fire Protection Association standards
Instrument Society of America Recommended Practices and Standards
Energy Industries Council Publication CC1 P/1 (Contractors Committee on Instrumentation) Instrument
Installation.
COMPUTER LITERACY :
Platforms : Ms Office 2011 - Windows XP
Packages : Ms-Office -2003, AutoCAD 2010.
PRESENTLY WORKING :
1, Project : E&I Commissioning Engineer (Bumi Armada in Singapore),
Client : ENI 1506 in Angola,
Position : Instrumentation Commissioning Engineer,
Duration : MAY 2016 to TILL THE DATE.
2 of 6
3. Exposure to engineer activities such as :
Inspection and testing of Electrical & Instrumentation and Communication Equipments as per Client and
DNV requirement for FPSO Project and Specialized Inspection DNV Class for Hazardous Zone Area For
ZONE 0,ZONE1,ZONE2 AREA.
Inspection of Electrical Equipment Installation for Atmospheric Explosion proof for Turret, Upper deck and
Modules Inspection ,Cable termination and Mechanical.
Monitor and sing for Electrical & Mechanical completion of ITR & ITP.
Raising punch list for against ITR.
Monitor and Ensure Electrical Contractors works done incompliance with PPE.
Monitor and report in project weekly meeting of current status.
Certified ATEX compliance after inspection carried out.
Direction coordinate Engineering ,Manufacturing, construction, installation, maintenance and support
documentation and test activities to ensure compliance with specifications, codes of practise and customer
requirements.
Pre-commissioning and Assisting in commissioning of Turret Instrumentation and Equipments. Performing
line check and loop check of all the instrument and Electrical cable prior to commissioning .
Involves in construction Inspection and commissioning activates.
Review technical drawing and support with engineering for the technical issues.
Attend FAT to outsource Electrical Equipment & Instrument.
2, Project : Construction Engineer (Punj Lloyd pte.ltd)
Client : SHELL marina in Singapore
Position : QA/QC Instrumentation Engineer
Duration : NOV 2014 to NOV 2015.
Exposure to engineer activities such as :
Review and Inspection of all major activities and monitor progress of construction work.
Testing and Pre-Commissioning &Commissioning of Electrical control panel ,Instrumentation like fire &
gas, PAGA & CO2 alarms, pressure switch, solenoid valves, pressure transmitters, level transmitter,
Temperature transmitter, flow transmitter, servo motor control valves, data control system.
Implement approved modification / installation of control system and instrumentation.
Inspection of the materials and make sure that FAT meet the project specification and data sheet.
To cheek various type of earthling like protective, Instrument Earth and dirty earth.
Inspection and pre-commission of MSB panel, DB’s lighting ,power and communication equipments,
Conducting the inspection with clients and ensure the job qualities according with industrial standards and
project specification.
Preparation of Instrument database.
Preparation of specification for various field instruments, packages.
Preparation of specification for control and shutdown systems
Review /preparation of Field bus device segment grouping.
Inspection at Vendor’s work, FAT for DCS/ESD/PLC / Control panels and system
Exposure to various international codes and standards begin used in oil and gas
Involved in standardization of instrumentation documents.
Certified ATEX compliance after inspection carried out.
Direct coordinate Engineering, manufacturing, construction, installation, maintenance and support
documentation and testing activities to ensure compliance with specifications, codes of practices and
customer requirements.
Pre-commissioning and Assisting in Commissioning of Turret Instrumentation and Equipments. Performing
Line check and Loop check of all the Instrument and Electrical cable prior to commissioning.
Involves in Construction Inspection and Commissioning activities
3, Project : Field Maintenance (Qatar National Facility Services pte.ltd)
Client : QATAR SHELL G.T.L. in QATAR.
Position : Instrumentation Engineer.
Duration : JUN 2014 to AUG 2014 .
Work Description Inspected :
I have worked in maintenance Power Plant (H.R.S.G, S.T.G , G.T.G, Auxiliary Boilers & Boiler Feed Water
Pump)
I have experience of working in shifts and to handle a complicated situation like an emergency shutdown,
break down, start up activities, corrective Maintenance and during day shifts for Preventive Maintenance
3 of 6
4. Jobs.
Preventive and Corrective Maintenance including Calibration, fault finding, Trouble shooting with TATA
HONEY WELL EPKS C300 FF SYSTEM, MARK VI & PCS 7
Calibration & Maintenance of Field Instrument like Flow, Level, Pressure &Temperature and all type of
Switches.
Calibration of DP type Level Transmitter, Electronic Smart Level Transmitter and level Switch (Magnatrol
Type & Enders Hauser).
I have knowledge in vortex, mass flow, Ultrasonic type flow meter, orifice plate, venture tube.
Control Valve & positioner, actuator assemble, dissemble, & bench setting, volume booster, Trip valve,
position transmitter, sov, switches, air lock relay, lapping, gland packing replacement, all activity service
repairing, Maintenance, calibration and servicing of various positioners like Fisher,DVC-6010/6020/6030,
Masoneilan, Flowserve ,metso etc……
I have worked in Bentley Nevada 3500 vibration system, calibration of vibration probe (axial, radial, key
phasor) with TK3 calibrator and removal & reinstatement of probes. Check all tripping before startup.
Foundation Field bus Technology: Have Experience on Device commissioning, troubleshooting and
maintenance of valves, transmitters and other instruments with HART-375,475 & FBT-6.
MOV maintenance (Rotork-IQ), connected to DCS through FF Loop and Setting its parameter with Remote
tool.
To perform the modification of control circuits and control loops as per the plant requirement RFC, MOC
and TPC (Request for change, Management of Change and Temporary Plant Change) changes and
update all related plant drawing to reflect the actual changes.
Know how to read and interpret Plot drawing, Hook up Drawing, Piping and instrument
Drawing(P&ID),Location drawing, and instrument loop drawing(ILD)
4, Project : TRUNAROUND (Qatar National Facility Services pte.ltd)
Client : RASGAS LNG in QATAR.
Position : Instrumentation Engineer.
Duration : MAR 2014 to MAY 2014.
Work Description Inspected :
The facilities include seven LNG trains, Acid / Gas removal unit, Sulphur Recovery unit and Process Utilities
facilities.
Involved in corrective and Preventive maintenance, witnessing all Instrument scope of activities whenever
required.
Calibration of all Pressure, temperature, Level and Flow instruments including
SMART transmitters.
Installation of cables, insulation resistance & continuity tests.
Installation of pneumatic, mechanical hook-up, Leak test of impulse lines.
Instrument Loop checking and pre commissioning
Check the impulse tubing and fittings for any leaks and replace them if required. Installing electronic
transmitters in the place of pneumatic transmitters and commissioning them as per the procedures lay
down
Also checking the ESD loops as per the procedures. Check the fire & gas and smoke detectors and alarms
and service the detectors.
Attended Safety training conducted at the plant site and listened to fire & Safety instructions and brought
them in practice, also attended the jobs called for by the operations during start up and rectified the
problems faced by them.
5,
Client : CEM MACHINERY PTE LTD in Singapore
Position :Assistant Engineer ( instrumentation engineer )
Duration : FEB 2013 to OCT 2013
PROCESS:
Assist the engineer in managing electrical/software programming modules of a project from
Customer specification in take tofabication, integration, testing, commission and final customer
acceptance of custom made machines and/or equipments for is electro-chemical planting
Assist in supervising sub-contractors to ensure high quality workmanship of incoming parts, electrical sub-
assembles and conformance to quality requirements
Maintain and update all project-related documents including bill of materials that are essential to ensure
efficient and high quality machine manufacturing;
Actively participate in selection of components and materials, and sourcing vendors of components and
4 of 6
5. sub-contract assembly/fabrication;
Coordinate fabrication ,inspection, installation, testing and commissioning of equipments and preparation
of operating manuals;
Ensure regular communications and approvals from customers at different stages of the project as agreed
with project stake holders.
Conduct on the job training for customers and provide field services and support to customer service unit.
6,
Project : Project & Field Maintenance (Driver Application)
Client : RCUBE ELECTRICAL PTE LTD, Bangalore, India.
Position : Assistant Engineer ( instrumentation engineer )
Duration : MAY 2011 to JAN 2013
PROCESS:
Here each machine are controlled by individual PLC control system and HMI, All the machines interfaced
with Ethernet communication through 1761-NET_ENI communication modules, and also monitoring all the
controls on individual system by using through the Ethernet communication.
Field devices like, proxy sensors, solenoid valves, limit switches, Pressure Switch, Temperature
Controllers, Encoders
Role: Effectively involved in Design, panel building, network communication and commissioning of the control
system
7,
TITLE : Undergone In-plant training
DURATION : May 2010 to June 2010.
END USER : TAMILNADU PETRO-PRODUCTS LTD, Manali, Chennai,
PERSONAL PROFILE:
Name : C.SATHISH KUMAR
Date of Birth : 13th
JUNE 1989
Sex : Male
Passport No : J3595823
Nationality : Indian
Marital Status : Single
Contac no :+91-9443533888
E-mail : sathishprc@gmail.com
Language : English, Tamil (To write and speak)
Strength : Self confidence, Time Management, Good co-operation and Strong
Analytical skills in problem solving
DECLARATION:
5 of 6
6. I hereby declare that all the above statement is true to the best of my knowledge and belief.
Date (C.SATHISH KUMAR)
6 of 6
7. I hereby declare that all the above statement is true to the best of my knowledge and belief.
Date (C.SATHISH KUMAR)
6 of 6