CCNA Discovery Answers, CCNA 4.1 Answers, CCNA Discovery 4.0 Answers, CCNA Discovery 4.1 Answers, CCNA 4.1 Answer Chapter 1, CCNA 4.1 Answer Chapter 2, CCNA 4.1 Answer Chapter 3, CCNA 4.1 Answer Chapter 4, CCNA 4.1 Answer Chapter 5, CCNA 4.1 Answer Chapter 6, CCNA 4.1 Answer Chapter 7, CCNA 4.1 Answer Chapter 8, CCNA 4.1 Answer Chapter 9

1. CCNA Discovery 4.1 - CCNA Discovery Answers
http://ccna-discovery-4.blogspot.com/
CCNA 1 Chapter 5 V4.0
Labels: CCNA 1 Chapter 5 V4.0
1) How large are IPv4 addresses?
8 bits
16 bits
* 32 bits
64 bits
128 bits
2)
Refer to the graphic. A user at the workstation cannot connect to the server. All cables
have been tested and are working and all devices have IP addressing. However, the
user cannot ping the server. What is causing the problem?
The router interface does not have a default gateway.
The switch does not have an IP address and default gateway.
* The workstation and server are on different logical networks.
The workstation does not know the MAC address of the switch.
3) Which part of an IP address identifies a specific device on a network?

2. CCNA Discovery 4.1 - CCNA Discovery Answers
http://ccna-discovery-4.blogspot.com/
first two octets
third and fourth octets
network portion
* host portion
only the fourth octet
4) Given a host with the IP address 172.32.65.13 and a default subnet mask, to which
network does the host belong?
172.32.65.0
172.32.65.32
* 172.32.0.0
172.32.32.0
5) Which default subnet mask provides the most host bits?
* 255.0.0.0
255.255.0.0
255.255.255.0
255.255.255.252
6) How many bits are available for Class B host IP addresses using a default subnet
mask?
4
8
* 16
24
7) How many usable hosts are available given a Class C IP address with the default
subnet mask?
* 254
255
256
510
511
512
8) Assuming a default mask, which portion of the IP address 175.124.35.4 represents
the host?
175.124
* 35.4
.4
124.35.4
175.124.35
9) Which of the following are private IP addresses? (Choose three.)
* 10.1.1.1
172.32.5.2
192.167.10.10
* 172.16.4.4

3. CCNA Discovery 4.1 - CCNA Discovery Answers
http://ccna-discovery-4.blogspot.com/
* 192.168.5.5
224.6.6.6
10) What destination IP address is used in a unicast packet?
* a specific host
a group of hosts
the default gateway
the network broadcast address
11) What is the destination MAC address in a multicast Ethernet frame?
the MAC address of the sending host
the MAC address of the destination host
* an address that begins with 01-00-5E in hexadecimal
a 48-bit hexadecimal address expressed as FF-FF-FF-FF-FF-FF
12) Yvonne is talking to her friend on the phone. What type of message is this?
broadcast
simulcast
multicast
* unicast
13) What information must be included within a unicast message for it to be delivered
on an Ethernet network?
MAC and IP addresses for the default router
IP address and subnet mask of the default gateway
MAC and IP addresses that correspond to a destination group
* MAC and IP addresses that correspond to a specific destination host
14) A PC obtains its IP address from a DHCP server. If the PC is taken off the
network for repair, what happens to the IP address configuration?
The configuration is permanent and nothing changes.
The address lease is automatically renewed until the PC is returned.
* The address is returned to the pool for reuse when the lease expires.
The configuration is held by the server to be reissued when the PC is returned.
15) Which type of server dynamically assigns an IP address to a host?
ARP
* DHCP
DNS
RARP
16) Which three statements describe a DHCP Discover message? (Choose three.)
The source MAC address is 48 ones (FF-FF-FF-FF-FF-FF).
* The destination IP address is 255.255.255.255.
The message comes from a server offering an IP address.
* The message comes from a client seeking an IP address.
* All hosts receive the message, but only a DHCP server replies.
Only the DHCP server receives the message.

4. CCNA Discovery 4.1 - CCNA Discovery Answers
http://ccna-discovery-4.blogspot.com/
17)
Refer to the graphic. A host connects to a Linksys integrated router that is also a
DHCP server and receives an IP address from it. Which address does the host need to
access the ISP and the Internet?
IP address of the destination host
public gateway IP address of the ISP
external IP address of the integrated router that connects to the ISP
* internal IP address of the integrated router that connects to the local network
18) Which statement is true concerning private IP addresses?
ensures that two networks separated by the Internet use unique IP network numbers
allows internal hosts to communicate with servers across the Internet
* solves the issue of a finite number of available public IP addresses
allows for ISPs to be able to quickly determine network location
19) What is one of the purposes of NAT?
filters network traffic based on IP address ranges
* prevents external users from detecting the IP addresses used on a network
inspects traffic that might be harmful or used in an attack against the network
translates IP addresses into easy-to-remember domain names
20) Which two statements describe packets that are sent through a Linksys integrated
router using NAT? (Choose two.)
Packets that are sent to any destination need to be translated.
Packets that are sent to hosts on the same network need to be translated.
* Packets that are sent to a destination outside the local network need to be translated.
Packets that are sent to a destination outside a local network do not need to be
translated.
* Packets that are sent between hosts on the same local network do not need to be
translated.

5. CCNA Discovery 4.1 - CCNA Discovery Answers
http://ccna-discovery-4.blogspot.com/
21)
Refer to the graphic. NAT and DHCP are installed on the Linksys integrated router.
Which IP address is most likely to be assigned to the local computer, Host1?
* 10.0.0.17
128.107.1.2
192.135.250.0
209.165.201.1