1. OHCC PATROL
PRESENTS
ZEBRA GK420D
“PASS REMOVAL AND
DISTRIBUTION”

2. The ZEBRA
GK420d
This is the Zebra
GK420d in “neutral”
mode. The Zebra
GK420d is used to print
passes for guests,
vendors, and real estate
agents, allowing them
to enter Ocean Hills
Country Club. It is
sometimes used to print
passes for residents
(i.e. new residents or
residents with new
cars).

3. REMOVING
THE PASS
(STEP ONE)
After locating the
correct information for
the guest, vendor, or
real estate agent, use
the mouse, located at
the right hand side of
the keyboard , to select
“print.” Remove your
right hand from the
mouse and place it on
the Zebra GK420d.
Place enough pressure
on the Zebra GK420d to
keep it in place
throughout the entire
process.

4. REMOVING
THE PASS
(STEP TWO)
After securing the Zebra
GK420d with your right
hand, place your left
hand near the output of
the Zebra GK420d and
extend your thumb
upwards in preparation
of receiving the pass. As
all hands are different
sizes, it will take some
practice to determine the
proper placement of your
hand so that the front of
the pass meets the space
between your thumb and
forefinger.

5. REMOVING
THE PASS
(STEP THREE)
As it prints the Zebra
GK420d will feed the
pass into your left hand.
Do not be alarmed!
After the Zebra GK420d
completes the printing
process, gently press
your left thumb down
on the pass as if
pinching it (see “Step
Four”).

6. REMOVING
THE PASS
(STEP FOUR)
With the pass firmly in
the grip of your “pinch,”
continue pressing down
on the Zebra GK420d
with “just enough
pressure” to keep it in
place as you prepare to
remove the pass.

7. REMOVING
THE PASS
(STEP FIVE)
Gently pull, in an even
and smooth motion, the
newly printed pass
towards you. Be sure to
use enough force to
cleanly remove the pass
from the Zebra
GK420d. Do not
remove your right hand
from the Zebra
GK420d until the pass
is removed!

8. PASS
DISTRIBUTION
(PART ONE)
Hand the newly printed
pass to the guard in
charge of access control.

9. PASS
DISTRIBUTION
(PART TWO)
If no guard is present,
get up from your chair
and distribute the newly
printed pass to the
guest, vendor, or real
estate agent.

10. ZEBRA
GK420D
TRAINING
Upon completion of this
PowerPoint
demonstration , ten
“dry runs,” and a thirty
question test on
removing and
distributing a newly
printed pass from the
Zebra GK420d, you will
receive a certificate of
completion, good for six
months.

11. ZEBRA GK420d
“PASS REMOVAL AND
DISTRIBUTION”
PRODUCER: JOE LEGGETT, JR.
DIRECTOR: JOE LEGGETT, JR.
STARRING:THE OHCC SECURITY TEAM AND THE
REMARKABLE ZEBRA GK420D.