LED direct indirect lighting is an attractive alternative to incandescent or fluorescent lighting in both residential and commercial lighting applications because they are very energy-efficient, have very long lives, are very small in size.

1. What is direct/indirect
lighting and what are its
types?

2. Your company slogan
Table of Contents
Direct/Indirect Lighting1
Types of direct/indirect lighting2
Contact Us3

3. Your company slogan
Direct/Indirect Lighting
A direct source of light which is cast downwards from a fixture
to provide lighting with uniform levels of illumination.
Open, louvered, and lensed fixtures can all be “direct”.
An indirect source of light which is cast upwards from a fixture
and bounced down to provide lighting with minimal glare and
more uniform levels of illumination.
A source of light in which light is cast both upwards and
downwards from a fixture to provide a combination of led
direct indirect lighting illumination.

4. Your company slogan
Types of Direct/Indirect Lighting
Juno Lighting S2X2 Indy 2 x 2 LED Recessed Light Fixture
Direct/Indirect Luminaire
Maxlite Direct MLFP14D4535 1x4 LED Flat Panel SHO
3500K Recessed Light
Texas Fluorescents | LED/T5 Direct/Indirect

5. Your company slogan
Juno Lighting S2X2 Indy 2 x 2 LED
Recessed Light Fixture Direct/Indirect
Luminaire
LED lighting technology offers the highest return on initial
investment over the life time of the fixture.
LEDs are individually spaced at small intervals to eliminate
any dark spots when combined with our diffusers.
LED light engine is completely removable and upgradable.
LED lighting technology offers the highest return on initial
investment over the life time of the fixture.
Four corner tie points are standard for safety wire support when
required. Built in earthquake clips standard.

6. Your company slogan
Maxlite Direct MLFP14D4535 1x4 LED
Flat Panel SHO 3500K Recessed Light
This light is ideal for saving energy by retrofitting existing T12 or
T8 troffer light fixtures.
A high performance LED flat panel designed to lay in to
drop ceilings and typically used to replace 1’x 4’
fluorescent fixtures, MaxLite LED Flat Panels are suitable for
office, school, hospital and medical facility applications.
Panels are fully dimmable, and are compatible with building
controls, motion sensors, timers, and daylight harvesting systems.
The LEDs enable long life, high lumen maintenance, high CRI,
low maintenance, and are constructed without hazardous
materials.

7. Your company slogan
Texas Fluorescents | LED/T5
Direct/Indirect
Specification grade, sturdy housing of heavy gauge steel with
high reflectance white enamel finish and matte white "sky light"
reflectors.
Suitable for recessed commercial and institutional applications
such as offices, hospitals, schools, etc. For use with standard
15/16” grid ceiling systems.
Center section is flush with outer panels, eliminating the dirt and
debris from collecting.
Shallow design for low clearance plenums.
Flush steel hinges from either side; field reversible.

8. Contact Us
Address : 6565 Sunset Blvd, Suite 416,
Los Angeles, CA 90028
Phone : 800.256.8949
Email : sales@troffers.net
Website : http://www.troffers.net/