1. Common car audio troubleshooting
Car audio by using environmental reasons, generally it is difficult to achieve with class family
sound effect, in use process than family sound more autel maxidas 708 prone to some fault, the
following introduce some common car audio fault and fault elimination method.
1. The sound track around the volume is not the same
Troubleshooting: first of all check host balance button is in the middle position, and check the
former stage lose and output LEVEL about whether the control button, and spread a large
machine input sensitivity about whether the same track Settings, such as still could not be ruled
out, but will host signal Can Clip Renault switch around, horn position on the other side of the
small will not change, if will have a problem, said the host. Otherwise, it is the problem of
posterior segment.
2. A channel Alt silent
Troubleshooting: check the partials apparatus of wiring are switched on and then use meter from
the partials device end to vcm ids measure any sound, may be wrong will horn line input terminal
to bass output end.
3, noise
Troubleshooting: check RCA signal terminal of negative end are switched on, if the host of the
RCA signal output end negative terminal have break, usable electric meter measuring, then check
the negative terminal and host casing are switched on.
4. Volume were small
Troubleshooting: check the ds708 power supply wire and car shell contact is loose, then check
the former stage and later stage transport and output RCA is normal or not, and finally see
sensitivity knob is normal or not.
http://blogs.rediff.com/careucar123/