F4000 - OPERATOR FOR LARGE SWING AND FOLDING DOORS The F4000 is a door or large door operator, designed especially for industrial settings. It is installed directly onto the leaf or transom, depending on the space, and provides safe linear movement, on medium-to-large doors with leaves of up to 2 m (6.5 ft) in length.

1. OPERATOR
FOR LARGE SWING
AND FOLDING DOORS
F4000

2. Operator for folding
doors and large doors
with slide guides.
The F4000 is a door or large door operator, designed especially
for industrial settings. It is installed directly onto the leaf or
transom, depending on the space, and provides safe linear
movement, on medium-to-large doors with leaves of up to 2 m
(6.5 ft) in length.
Dimensions (mm)
640
555
161
194.5
151.5
42
33.5
10
Photocell
Low consumption
LED flashing light
Sensitive
safety edges

3. Benefits
that become
solutions.
Read up at came.com about
the full range of Came products!
Came is a market leading home, industrial,
and special technological projects
automation manufacturing company.
A full range of household solutions: from
operators for gates and garage doors, to
shutter and awning winding motors, and
even home automation control, to burglar
proof and video entry systems.Technology
and reliability to serve your business,
thanks to solutions designed for powering
large industrial doors, automatic doors,
street barriers, turnstiles, access control
systems and parking facilities.
Guaranteed by 24 Volts
Systems running at 24 Volts are super
safe to use and very reliable under intense
working conditions, such as those found
at residential apartment complexes and
industrial facilities. Moreover, 24 Volt
systems work even during power outages,
thanks to the optional batteries.
EN TESTED safety
An electromechanical EN TESTED
branded system always ensures safe
controlled operation of moving doors,
in compliance with current legislative
standards in terms of impact forces.
SUPER VERSATILE
• Slide lever, especially designed to be applied on large folding doors,
fastened to the leaf or transom, depending on the need.
• User-friendly fastening base made of 6060 aluminium for quick fastening
to the door leaf or transom.
• The only model made with two inputs to the gear shaft, so it can be
mounted either to the left or right.
• Weather resistant gaskets for outdoor installation.
• Handle or pull cord release system, for easily opening the door
in case of need.
THE 230 V ELECTRONICS
• Test of all active safety features fitted on the system before the door
even moves to open or close.
• Pedestrian or partial opening to allow opening of just one leaf or the
limited opening for pedestrians.
• Complete control of the door from the remote control including the
possibility of immediately stopping the door-leaf movement.

4. LIMITS TO USE (MAXIMUM PASSAGE WIDTH)
LARGE SINGLE LEAF FOLDING DOORS LARGE SWING-LEAF DOORS
1.5 m
4.9 ft
F40230E
200 Kg
441 lb
F4024E
200 Kg
441 lb
2 m
6.6 ft
F40230E
300 Kg
661 lb
F4024E
300 Kg
661 lb
230 V AC 24 V DC
MODEL F40230E F4024E
Protection rating (IP) 54 54
Power supply (V - 50/60 Hz) 230 AC 230 AC
Power supply to motor (V) 230 AC 50/60 Hz 24 DC
Draw (A) 1.2 5
Power (W) 140 130
Crown turns (rpm) 1.3 1.3
Duty cycle (%) 30 INTENSIVE USE
Torque (Nm) 540 360
Operating temperature (°C / °F) -20 ÷ +55 / -4 ÷ +131 -20 ÷ +55 / -4 ÷ +131
Reduction ration (i) 1/150 1/150
Motor's heat protection (°C / °F) 150 ÷ +302 -
230 V AC 24 V DC
Came
Cancelli Automatici
S.p.A.
Via Martiri della Libertà, 15
Dosson di Casier
Treviso - ITALY
www.came.com
MODEL F40230E F40230E F4024E F4024E
CONTROL PANEL ZM3E ZM3EC ZLJ14 ZLJ24
SAFETY FEATURES
SELF-DIAGNOSING safety devices
PREFLASHING while opening or closing
REOPEN while closing
RECLOSE while opening
WAIT obstruction
TOTAL STOP
PARTIAL STOP
OBSTRUCTION DETECTED in front of photocells
ENCODER
Device for CONTROLLING MOVEMENT and DETECTING ANY OBSTRUCTIONS
AMPEROMETRIC DETECTION
CONTROL FEATURES
OPEN ONLY from transmitter and/or button
OPEN ONLY or CLOSE ONLY button connection
OPEN-STOP-CLOSE-STOP from transmitter and/or from button
OPEN-CLOSE-INVERSION from transmitter and/or from button
MAINTAINED ACTION
OPENING DELAY 1st leaf
CLOSING DELAY 2nd leaf
CHARACTERISTICS AND ADJUSTMENTS
FLASHING LIGHT connection
CYCLE LAMP connection
COURTESY LAMP connection
Antenna
GATE OPEN FLASHING LIGHT connection
Contact output for 2nd RADIO CHANNEL
OPERATING TIME adjustment
SELF-LEARNING of the transmitter's RADIO CODE
ELECTROLOCK/ELECTROBLOCK and/or ANTI RAMMING connection
Adjustable AUTOMATIC RECLOSING TIME
OPENING and/or CLOSING slow down
EMERGENCY BATTERY operation (optional)
Adjustable TRAVEL and SLOW-DOWN speeds* *
DISPLAY
SELF-LEARNING opening and closng limit-switches
* NOTE: 002ZM3E only slow down speed 230 V AC 24 V DC
CUSTOMIZED ELECTRONICS FOR YOUR NEEDS!
The F4000 is available in the 230 V AC and 24 V DC versions. The table shows the main
characteristics of the control panel, matched to the gearmotors.
Came S.p.A.
is Quality
and Environmentally certified by
UNI EN ISO 9001
UNI EN ISO 14001
100%MAD
E
IN ITALY CE
RTIFICATE
ITPI.386
GARANZIA QUALITÀ ORIGINALE
Came products
are entirely designed
and made in ITALY
Came S.p.A.
Via Martiri della Libertà, 15
Dosson di Casier
Treviso - Italy
www.came.com Came is a company of
SOME VERSION MAY NOT BE AVAILABLE IN YOUR COUNTRY. FOR MORE INFORMATION PLEASE CHECK WITH YOUR LOCAL AUTHORIZED DEALER.
© CAME SPA - KDEP#CEN11A3S114 - JAN_2014 - EN
Even partial reproduction is prohibited • Came reserves the right to make any changes to this document at any time