Empfohlen
Weitere ähnliche Inhalte
Was ist angesagt?
Was ist angesagt? (20)
Ähnlich wie High-Speed Spindles
Ähnlich wie High-Speed Spindles (20)
Kürzlich hochgeladen
Kürzlich hochgeladen (20)
High-Speed Spindles
- 1. Powered by the See Machining from a New Angle benztooling.com/metalspeeders Tooling Systems for Machining Centers High-Speed Spindles
- 2. Powered by the See Machining from a New Angle benztooling.com/metalspeeders High-Speed Spindle Types Type SL: with Jacket Cooling Type SLI: with Internal Cooling • Increase Speed in Use By the 1000‘s / Ratio 1:5 • Offers Solutions for All Applications Where the Existing Machine RPM and the Resulting Cutting Speed Do Not Allow for Economical Production
- 3. Powered by the See Machining from a New Angle benztooling.com/metalspeeders Specifications • With Ceramic Bearing for High-Speed Cutting • Revolutions up to 40,000 RPM (With Coolant) • Revolutions up to 18,000 RPM (Without Coolant) • Coolant Pressure up to 80 Bar • Especially Suitable for Precise Machining • Primary Application is Drilling • High Flexibility Due to Exchangeable Torque Arm • All Types of High-Speed Spindles Produced Standard with Jacket Cooling. This Reduces Operating Temperature and Results in Consistent Operating Parameters • Wide Range of Standard Models
- 4. Powered by the See Machining from a New Angle benztooling.com/metalspeeders HSS Application • Primarly Designed for High-Speed Drilling • Slight Millworking without Any Specific Surface Hardness Must Observe Limited Duty Cycle High-Speed Spindles Can Not Be Run Continously without Time for the Bearings to Cool. Maximum Duty is 10 Minutes Running and 10 Minutes Cooling. Running Outside of These Parameters Will Deteriorate Life Expectancy of the Speeder.
- 5. Powered by the See Machining from a New Angle benztooling.com/metalspeeders HSS Tool Change • Can Be Automatically Tool Changed through Machine Tool Changer or Manually Tool Changed • For Automatic Tool Change Applications, a Stop Block Must Be Purchased and Installed to Keep Torque Arm from Rotating • Manual Tool Changed Speeders Require a Block or Pin to Secure the Hand Torque Arm from Rotating
- 6. Powered by the See Machining from a New Angle benztooling.com/metalspeeders HSS / Technical: Design High-Speed Spindle: Complete with Drive Taper. The Spindle Is Produced Standard with ER DIN6499. Other Designs through Request. Torque Arm: Holds the Spindle in Position/ Avoids the Twisting. Available in Machine Specific Design*, or in Benz Standard. *Exact and detailed machine connection data from customer side are necessary. Machine Connection: Different Designs Possible: HSK, SK, BT, CAT… Hand Torque Arm: Is Used by Manual Tool Change
- 7. Powered by the See Machining from a New Angle benztooling.com/metalspeeders SLS | Technical: Cut Away View
- 8. Powered by the See Machining from a New Angle benztooling.com/metalspeeders High-Speed Spindle – Unlimited Duty • 40,000 RPM High-Speed Spindles for Machining Centers • Unlimited Duty Cycle • Self-Cooling • Coolant Through the Tool is Available as an Option • Primary Application – Drilling • Increased Milling Capabilities • Less Vibration • Increased Surface Finish • Capable of Running Ceramic End Mills • HSK, CAT40 & CAT50 Available
- 9. Powered by the See Machining from a New Angle benztooling.com/metalspeeders Contact Us Directly For Questions Rapid Turnaround to Minimize Downtime • BENZ Inc.’s Standard Repair Service Turnaround is Two Weeks • Choose Expedite Service to Replace Worn or Damaged Tools within 72 hours • Preventive Maintenance Program is Available to Minimize Unscheduled Downtime • One-Year Warranty on all Repairs BENZ Inc. 704.529.5300 www.benztooling.com 8325 J Arrowridge Blvd. Charlotte, NC 28273
- 10. Powered by the See Machining from a New Angle benztooling.com/metalspeeders For More Information Regarding BENZ High-Speed Spindles, Call 704-529-5300