The Beam On PrintPart System was developed to address the shortcomings of mini stencils for solder paste printing. It eliminates issues with inconsistent printing, required keep away clearances, and sometimes needing to remove components. The PrintPart System allows direct printing on components and is compatible with most common rework systems. It provides an even, consistent method for depositing solder paste.

1. Your rework is now simplified

2. Introducing the Beam On PrintPart System
This system was specifically developed to address the shortcomings of mini stencils.
Mini stencils do not print consistently, require significant keep away clearances, and in
extreme cases require removal of discrete components to accommodate the process.
Our PrintPart System eliminates these issues and permits you to print directly on the
component. Most importantly, it is developed to be compatible with most common
rework systems such as SRT, AirVac, and other popular rework machines
www.beamon.com
It Works With
Leadless Parts !
Copyright 2007 Beam On Technology

3. www.beamon.com
Instructions for use
Press down to engage the spring When cover is fully engaged,
simply release it
Slide the cover forward
Place component “contact” side
down on nest
Align pins on cover to match
holes on nest
Hold spring cover over nest
Flip assembly over Now the assembly is ready
for paste printing
Apply solderpaste with squeegee

4. Flip back over againMake one last clean pass Press down to release lock and
slide backward
Part is now ready for machine
pick up
Release pressure and lift off
Paste is deposited evenly
and completely
Our proprietary clamping system
ensures perfect contact with foil
PrintPart works with all devices
www.beamon.com
In use on a rework system