2. Topics to be covered
Bluetooth
Introduction
Name, Idea
How Bluetooth Technology works
Advantages
Disadvantages
Security
Future
CDMA
Introduction & History
Key Elements
Advantages
Disadvantages
6. Originally and commonly (in day to day life), it is used to connect
headset to a mobile phone. Or transferring data from one mobile to
another (songs, pics, docs, messages).
Then Bluetooth started being used to connect headsets to a regular
computer.
Then progressed on to making printers wireless as well as being
able to connect to a Bluetooth network.
Bluetooth is a protocol that allows you to remotely access and use
devices on a computer or phone without the use of wires.
Bluetooth is a short-range wireless communications technology.
These signals travel through walls, windows, doors.
Uses short-wavelength radio transmissions in the ISM band from
2400-2480 MHz
Wireless alternative to data cables.
BMW was the first motor vehicle manufacturer to install handsfree
Bluetooth technology in its cars. Followed by Toyota and Lexus.
8. Bluetooth was named for the 10th Century Viking king, Harald
Blatand (aka bluetooth) who peacefully united all tiny island
kingdoms of Denmark, southern Sweden and Southern Norway into
one country.
In keeping with its namesake, Bluetooth, the new low-cost radio
technology, is designed to unite or connect all different types of
devices to effectively work as one.
10. Idea that resulted in the Bluetooth wireless technology was born in
1994.
Initiated by Ericsson to investigate feasibility of a low-power, low-
cost radio interface.
Bluetooth SIG (Special Interest Group) formed in1998.
First specification released in July 1999.
1900 member companies till date.
Main players
3Com Corporation
Ericsson
IBM
Intel
Agere
Microsoft
Motorola
Nokia
12. Instant formation of networks.
A piconet is collection of devices connected via Bluetooth technology
Simple connection between two devices or more devices.
Unlike infra-red, Bluetooth does not require line-of-sight positioning
of connected units.
Embedding tiny, inexpensive, short-range transceivers into the
electronic devices
The radio operates on the globally-available unlicensed radio band,
2.45 GHz
Supports data speeds of up to 721 Kbps.
The Bluetooth modules can be either built into electronic devices or
used as an adaptor. For instance in a PC they can be built in as a
PC card or externally attached via the USB port.
Best alternative to data transfer as compared to corrupt DVD/CD
ROM
14. Freedom from cables
Technology is Inexpensive
Automatic
Standardized Protocol
Avoids Interference from other wireless devices
Low Power Consumption
Faster Voice and Data sharing
Instant Personal Area Network (PAN)
Upgradeable
Universally accepted
Simplifies communication while driving
Best alternative to data transfer as compared to corrupt DVD/CD
ROM
15. Core Bluetooth Products
Notebooks PCs & Desktop Computers
Printers
PDAs
Other Handheld devices
Cell Phones
Wireless Peripherals:
Headsets
Camers
CD Player
TV / VCR / DVD
Telephone Answering Devices
Cordless phones
Cars
17. Compatibility between Bluetooth products
Data Transfer Rate
Limited Range
Security
Battery Use
Interference with other devices that may use same frequency (e.g.
garage door openers, cordless phones, microwave ovens, etc)
19. Security Measures
Authentication
Personal Identification Numbers (PIN) fro device access.
Long Encryption keys are used (128 bit keys).
These keys are not transmitted over wireless. Other parameters
are transmitted over wireless which in combination with certain
information known to the device, can generate the keys.
Further encryption can be done.
20. Bluetooth Vs. Infrared
Bluetooth Infra-Red
Point to Multi-point Point to Point
Data & Voice Intended for Data
Communication. Communication only.
Easier Infra-Red, cannot
Synchronization due penetrate solid
to Omni-directional objects.
Devices can be mobile Both devices must be
Range 10 meters stationary.
Range 1 meter.
22. Continually expanding technology.
The Bluetooth SIG is trying to evolve the Bluetooth technology to
provide greater bandwidth and distances, thus increasing the
potential platforms and applications used in the emerging personal
area networking marketplace.
New application profiles.
24. CDMA (Code Division Multiple Access).
Both data and voice are separated from signals using codes and
then transmitted using a wide frequency.
This leaves more Space left for data transfer.
14% of the worldwide market goes to CDMA.
CDMA uses a “spread-spectrum” technique whereby
electromagnetic energy is spread to allow for a signal with a wider
bandwidth.
CDMA is military technology first used during World War II by
English allies to foil German attempts at jamming transmissions.
The allies decided to transmit over several frequencies, instead of
one, making it difficult for the Germans to pick up the complete
signal.
The CDMA standard was originally designed by Qualcomm in the
U.S. and is primarily used in the U.S. and portions of Asia by other
carriers.
26. CDMA is a form of spread spectrum transmission technology. It has
a number of distinguishing features that are key to spread spectrum
transmission technologies:
Use of wide bandwidth: CDMA, like other spread spectrum technologies uses
a wider bandwidth than would otherwise be needed fort he transmission of the
data. This results in a number of advantages including an increased immunity to
interference or jamming, and multiple user access.
Spreading Codes Used: In order to achieve the increased bandwidth, the data
is spread by use of a code which is independent of the data.
Level of security: In order to receive the data, the receiver must have a
knowledge of the spreading code, without this it is not possible to decipher the
transmitted data, and this gives a measure of security.
Multiple access: The use of the spreading codes which are independent for
each user along with synchronous reception allow multiple users to access the
same channel simultaneously.
28. The use of CDMA offers several advantages and it is for this reason
that CDMA technology has been adopted for many 3G cellular
telecommunications systems.
Improvement in capacity and Security: One of the chief claims for CDMA is
that it gives significant improvements in network capacity.
With CDMA technology, data and voice packets are separated using codes and
then transmitted using a wide frequency range. Since more space is often
allocated for data with CDMA, this standard became attractive for 3G high-speed
mobile Internet use.
Low power requirements and little cell-to-cell coordination needed by operators.
Improvement in handover / handoff: Using CDMA it is possible for a terminal
to communicate with two base stations at once. As a result, the old link only
needs to be broken when the new one is firmly established. This provides
significant improvements in terms of the reliability of handover / handoff from one
base station to another.
CDMA has been a particularly successful technology. CDMA technology has
been used in all the 3G cellular telecommunications systems in one form or
another and has enabled significant improvements to be gained over previously
technologies used in 2G systems
30. Due to its proprietary nature, all of CDMA's flaws are not known to
the engineering community.
CDMA is relatively new, and the network is not as mature as GSM.
CDMA cannot offer international roaming, a large GSM advantage.