1. Residential Water
Damage: How to
Reduce the Risks
Brought to you by:

2. Based on statistical surveys, water damage is
accounted for millions of dollars in repair costs for
Australian residents annually. While this problem
may be caused by natural factors such as storms or
heavy rainfall, plumbing disasters are often the
cause. Water leaks, faulty drains and broken fixtures
will cause flooding and water seeping – which can
water damage to your home.
Fortunately, water damage can be prevented. There
are several steps that you can take to reduce the
risks.

3. 1. Prioritise Preventive Plumbing Maintenance
Make sure that your plumbing system is regularly checked and
maintained by professionals. A yearly inspection is
recommended, enabling you to make the necessary repairs
before plumbing disasters such as leaks and blockages
occur.

4. 2. Install Safety Fixtures
Two most common safety fixtures are the main shut-off valve
and the pressure regulator. The main shut-off valve is used in
preventing water from entering your plumbing system during
a leak or a suspected burst water pipe. The pressure
regulator, on the other hand, regulates the water pressure
(PSI) on the pipes inside your home to lengthen the lifespan of
pipes and plumbing fixtures.

5. 3. Act Fast if It’s a Plumbing Emergency
When you experience plumbing emergencies, make sure to
call an emergency plumber as soon as possible. Well, look no
further for a reliable team that covers Melbourne’s Western
Suburbs as Aqua Maintain is here. Our team of fully licensed
technicians will be at your doorstep as fast as possible.

6. 4. Clean Up Fast During Leaks
When a leak occurs due to broken fixtures or burst pipes, remove
as much water as possible. Make sure that valuable items
such as home decors, wall paintings, books and wooden
furniture are removed from the flooded area.
Safety Warning: If there is a great amount of water caused by
the leak, avoid entering the flooded area if you think there is a
risk of electrocution.

7. 5. Be able to Identify Unseen Problems
Sometimes, leaks and pipe bursts aren’t that obvious. You’ll only
be able to see physical signs when water damage already
shows. However, by comparing your usage figures of your
monthly water bill, you may be able to detect a leak issue
inside your home. Another way of detecting problems is
through your installed water pressure gauge. By detecting a
drop of PSI on your water supply, this also indicates an unseen
leak.

8. 6. Check Your Appliances
Most of the time, water damage are caused by faulty water lines
on washing machines and dishwashers. Thus, make sure that
all appliances that use water are in proper order. Regularly
check the rubber hoses that connect these equipment to your
water lines.

9. Water damage is truly a headache for homeowners. In addition to
the inconvenience that it brings, it may be a costly problem to solve.
Thus, it pays to make the necessary prevention. For a small expense
today, you might be able to save a lot of money in the long run.
For any plumbing needs call us on (03) 9369 3707. We service the
areas of Point Cook, Werribee, Hoppers Crossing, Altona, Wyndham Vale,
Tarneit and the whole of Western Melbourne. You can also visit our website
at aquamaintain.com.au.