1. ANIL H V 9900324423
: anilhv1989@gmail.com anilhv562
Page 1
CARRER OBJECTIVE
To work in a Dynamic & Challenging growth oriented environment, which will allow utilizing my skills
to the best and creating an impact in the growth of company and also give me opportunity to up-
grade my knowledge for my career growth.
PROFILE SUMMERY
3+ years in Piping Design Engineering
Worked on Oil & Gas, Power plants.
Worked on various stages of Projects.
Conversant with various ASME standards
Having good Knowledge in PDMS, AutoCAD
Participating in Project Schedule meetings and Review Meetings
WORK EXPERIENCE
PDMS Design Engineer - August 2012 - Present
PETROPHOENIX Engineering solutions Pvt. Ltd. Rajajinagar, Bangalore, Karnataka, India
Current Project MUMBAI HIGH SOUTH REDEVELOPMENT PHASE – III PROJECT
(WELLHEAD PLATFORM)
Responsibilities Preparation of Bulk MTO’s and Support MTO’s in client specified format.
Checking piping Isometric with P&ID, Equipment drawing.
Piping GA’s & Support drawings extractions using DRAFT.
Reviewing of clashes in PDMS & NAVIS Works.
Interacting with other disciplines.
Checking of Isometrics, Piping GA’s.
Project V
(04/15 – 02/16)
FPSO - ANGOLA BLOCK 15/06 EAST HUB DEVELOPMENT PROJECT
(Worked in Oiltech chennai under deputation)
Responsibilities Checking piping Isometric with P&ID, Equipment drawing and PMS.
Checking of Isometrics, Piping GA’s & pipe supports.
Reviewing of clashes in PDMS & NAVIS Works.
Interaction with 3D Administrator to build specs and catalogs required for
modeling.
Updating of Support Standard.
Checking of pipe supports as per support standard.
Interacting with other disciplines.
Project IV
(06/14 – 03/15)
GLOSGOW RECYCLING AND RENEWABLE ENERGY PROJECT– UK
(Worked in Atkins Global under deputation)
Responsibilities Preparation of Piping Layout.
2. ANIL H V 9900324423
: anilhv1989@gmail.com anilhv562
Page 2
Checking piping Isometric with P&ID, Equipment drawing and Civil
Drawings.
Piping GA’s & Support drawings extractions using DRAFT.
Interaction with 3D Administrator to build specs and catalogs required for
modeling.
Checking of Isometrics, Piping GA’s & pipe supports.
Project III
(10/13 – 05/14)
CPOC PHASE 3 Redevelopment project – THAILAND (Offshore)
Responsibilities Preparation of Equipment Layout as per Vendor GA using PDMS.
Preparation of equipment modelling, nozzle orientation drawings, piping
layout.
Piping GA’s & Support drawings extractions using DRAFT and annotations
to finalize them for issue.
Pipe support modeling using PDMS
PDMS clashes & data in-consistency checks and resolving them.
Interaction with 3D Administrator to build specs and catalogs required for
modeling.
Checking of Isometrics, Piping GA’s & pipe support location plans.
Updating of Plot Plan.
Project II
(04/13 – 09/13)
Compressor Module Project, PetroChina (Offshore)
Description Equipment modeling as per Vendor GA using PDMS.
Piping GA’s & Support drawings extractions using DRAFT and annotations
to finalize them for issue.
Preparation of Plot Plan.
Submission of piping MTO in the client specified format.
Review of PDMS modeling of Equipments & Skids. Locating them with
respect to Equipment Layouts
Preparation of isometrics.
Project I
(10/12 – 03/13)
Aviation Fuel Station – Shell MRPL, Mangalore
Description Reviewing the pipe routing in line with piping and
Instrumentation diagram & Pipe material specification.
Checking piping Isometric with P&ID, Equipment drawing and Civil
Drawings.
Planning and Clearing interferences with other discipline item.
Technical co-ordination with other disciplines (Process, structural,
3. ANIL H V 9900324423
: anilhv1989@gmail.com anilhv562
Page 3
Electrical, Instrumentation & Mechanical).
Preparation of equipment layouts, nozzle orientation drawings, piping
layout.
Checking of Isometrics & GADs.
Preparation of Piping MTO.
Modeling pipe supports in PDMS
Project As Built project- Canada
Description Preparing of isometric piping layouts as per coordinates.
Checking piping Isometric with P&ID, Equipment drawing and Civil
Drawings.
Checking of spools and tag numbers as per GA.
Updating of comments.
Updating of Plot Plan.
Submission of piping MTO in the client specified format.
KEY SKILLS
Understanding of G.A Drawings based on P&ID and plant layout.
Proper understanding of Equipment layout & piping layout.
Preparation of MTO from the P&ID in the client issued Formats.
Able to do modelling in PDMS like Equipment, Piping, Structures.
Isometric Drawings Extraction from PDMS ISODRAFT.
Certified in Process Piping Design & Engineering as per ASME B31.3
Certified in PDMS 11.6
Piping and fitting standards.
International Codes like ASME B31.3, B16.5, B 36.10, B 36.19, B 16.9, B 16.25, API
standards.
EDUCATIONAL QUALIFICATIONS
Bachelor of Engineering in Mechanical, Visvesvaraiah Technological University,
Karnataka
TECHNICAL AND SOFTWARE EXPERTISE
Operating systems : Windows 98/2000/XP/07
Software Skills : PDMS, AUTOCAD, NAVIS WORKS, MS OFFICE
INDUSTRY VERTICALS
Oil and Gas
Power Plant
4. ANIL H V 9900324423
: anilhv1989@gmail.com anilhv562
Page 4
PERSONAL DETAILS
Date of Birth : 22-06-1989
Contact Address : #374, 5th main, Banashankri 1st stage, Srinagar,
Bengaluru – 560050
Mobile : 9900324423
Languages known : Kannada, English, Hindi